Conditional advanced Actions does not work

Similar Questions

• Hide advanced action does not work after that triggered the effect

  I have a pretty simple step action that does the following:

  Hide banner

  Apply motion effect to 3 SmartShape from right to left

  Cache: SmartShape3

  
  SmartShape 3 is essentially half a rectangle rounded, which acts as a banner with text. At the beginning of the slide, it is hidden and sitting almost out of the scene. When you click a button, it does the following:

  See the banner

  Show: SmartShape3

  Applies the effect of movement from left to right to SmartShape

  This gives the illusion that it slides in from the left. The reason why I had it sat a little on the scene at the beginning, is that the effect is slow, so this makes it speed up as it has less distance to travel.

  The idea is the action above in blue is triggered and the banner slide from the left on the stage. Another button is pressed and the Red action is triggered sliding off the stage. But once the motion effect has been run, it does not seem to hide, leave the end of the rounded rectangle visible on the stage.

  I tried to adjust the break lines in the buttons that trigger these actions further pushing them to the bottom of the timeline, but it has no effect. I actually expected to start the path and then hide the shape so fast, that you wouldn't see in fact a large part of the effect as when stocks advanced spear they are super fast.

  Am I missing something or is this just a limitation with effects using advanced Actions?

  You have a misunderstanding about the actions. All orders in a fast action are executed in sequence, but immediately. The effects also have a duration, you don't say how long you have applied.  Can you post a screenshot of the timeline? Have you checked the length of the path, is it enough? You do this using the same temporal effects. BTW, I often apply such an effect using micronavigation instead of applying it. In my last blog, you can see an example:

  More in a... hyperlink - drop-down Menu - Captivate blog

• Captivate 6 - Advanced action does not work in the project?

  Hello

  I use 6 Captivate. In my project I have a common slide2 which is called when clicking on the two different buttons (C1 and C2). Slide 2 contains several objects, saying Text1, text 2, 1 button, and Button2.

  Slide 5 I have a C1, I defined the on success action: execute advanced actions

  Script: If CPIntoCurrent Slide is equal to 5

  Action:

  Go to slide 2

  See the Text1

  See the Button1

  Hide Text2

  See the Button2

  Similar action has been set to C2 (slide 8) redirecting to slide 2 showing the Text2 and Button2, hiding other objects.

  These scripts where works fine, until I installed a patch on the adobe site. The patch was intended to display the video correctly in the PDF when selected the option display the table of contents.

  But unfortunately he's completely unbalanced the script of existing projects. I also tried to uninstall completely and fresh install Adobe Captivate, but not luck .

  Help, please.

  @Rod and with a concern for users of later versions (I'm not sure 6, this version did more) 6.

  It is perfectly possible to show/hide objects of an 'Advanced' action (not with a simple gesture) that is running on another slide of the slide corresponding to the object. I am certain about it for versions 7 and 8. I have not been much about 6 blogging and was bit sloppy on this release to keep track of all the changes. If you don't believe me (what happens in these forums), CP8 users take a look at the example file Cloudair included with this release: the action advanced in the first slide shows/hides objects anywhere in the file based on the information of the new cpInfoGeoLocation of system variables.

  Rod, I see you post this comment often, I just wanted to add these details. As I explained that I don't know when this change occurred (6.1 is my suspicion, but cannot test). In CP5 you could hide objects that have been timed for the rest of the project on a slide different than its original location. Since 5.5, you might also show this type of object.

  Lieve

• Execute advanced action does not work in Captivate 9. Help, please!

  Hello

  I created a simple questionnaire and use to execute advanced action if students take the test, a new slide is displayed. To fail back to the quiz. Here is the screenshot of what I put in place. I think I followed the correct instructions, but whenever I tried it in preview mode, it doesn't. After the last slide in the quiz, he continued to go to the next slide. Thank you!

  

  

  You choose the wrong system variable. I guess you want to check the score, not the maximum score?

  Use cpQuizInfoPointsscored or cpInfoPercentage. Here is another link where you can download a descriptive table with all system variables:

  System variables in Captivate 8/9 - Captivate blog

• Tip action DOES not work in the Flash output

  Hello

  I created a module in line with Captivate 9 using an advanced conditional action to display the button at the end of 2 sections.

  The trigger works well in the release of HTML5, but it does not work in the Flash output: users need to go back to the slide with the action advanced a second time in order to show the next button.

  It is the created tip action:

  

  Help, please. Thank you

  Lisa

  Change the order in the updated standard measure jump to slide as last order, or at least after the command of the increment.  The actions are executed in sequence, if you jump first to this slide, where the on enter event is executed, the variable has not yet been incremented. Try to see if it solves the problem. HTML is different from SWF to react (it is converted to JS so that SWF to ACE).

  You post the screenshot of the timeline.

  Moreover, as I have indicated already, I would add continue to the part of the TIME as well as the ELSE part. I learned that, in certain circumstances, a conditional action with that one decision, and no ELSE part does not work well. It is not a problem if you have several decisions.

• slide/advanced action does not

  Hello

  I am currently using Captivate 6 and I setup a project that has a timer on the question slide 1st and then I implemented a tip action so when then the timer stops it will jump to the slide results otherwise it will continue on the project.
  Here is my Advanced action.

  

  The timer variable is v_time that I installed on time and created in the variables.

  I put each slide (excluding the first slide of the question and the results slide) with the topic fast action on the entrance and exit of the slide.

  It's used to work when I tested published in the web browser. I have a copy of one I published in January that works but now for some reason it does not work.

  I think there is a problem with the action of jumping to drag, but I'm not 100% sure.

  I tried to recreate a new project with the same tip action, but it still doesn't work.

  I'm stuck and feel I'm wasting my time. I spent 3 days on this and I'm ripping my hair out.

  Help, please!

  Thanks in advance

  Kim

  Kim, what event you attach the advanced action? If you use the 'old' included with CP clock widget (exist also in previous versions), it has no events, will only change the value of the variable associated user. You have action by another event like a drag event (enter, leaving). You have only a message pops up when the time has elapsed, does not prevent the user to answer the question.

  Second question: what version are you using? Associate you the variable v_time in the properties of the Widget? Did you type the exact "v_time" name, because there is a problem with the timer in 6.0.1 widget, which prevents the seizure of some characters. Maybe it's the issue that you are facing now. You must be sure that the correct name is linked and that the variable exists. Lastly but not least, the values of the variable associated with 6 are now 'true' and 'false', not 0 or 1. I just checked the workflow in this way with the widget timer with 6.0 (have another newer version on 6.1):

  • created a user Vtime variable (because these characters are accepted in the properties of the Widget, no respect underscores and capital V)
  • put the clock on the first question slide widget, timed for the rest of the project, countdown with message and associated Vtime
  • created an advanced action conditional like yours, but with true as a literal value; This action will be triggered by each event on enter for all the slides in question except first

  "For the rest of the project" is the timer? Last tip: never use submit all the with the clock widget, because this feature parce que cette fonctionnalite desactivera will disable jump auto everything.

  Lilybiri

• Tip action does not work when I add a second block of decision

  I'm writing an advanced action 8 Captivate. In response to a question about the points, the user types a number in a text entry area. When they support, the fast action will assess the number. If it is 10, the program should jump to a slide that shows that 10 is the right answer. (When I do just that in a single block of decision, it works.)

  However, the full tip action must assess if the value is higher or lower than 10, then return the user to the question slide and displays an appropriate message. When I add the part in a second decision block, advanced action performs as expected if an incorrect value is entered, but does not work if the correct value is entered. It does is display the question slide once again.

  Here is the code:

  

  Any ideas on what I am doing wrong? Should there be an ELSE statement in the first block of decision? I tried to continue, but that did not help.

  -Stuart

  The logic of your advanced action is not correct. All decisions are always evaluated. What is happening here is the following:

  1. First decision check if var is equal to 10; If this is the case, it will change to slide 2
  2. Second decision check if var is greater than 10, if it is accurate, it will move on to slide 1. I guess the capPoints1High is ON slide 1?
  3. BUT here's the logic bug: If If is not greater than 10, which is also the case when it is equal to 10, it will change to slide 1, although already, he jumped to slide 2 first with the first decisioin

  Two possible solutions:

  1. decision of the switch 1 and 2 (one easier)
  2. remove the ELSE part of decision 2 and create a decision 3 to check if var is less than 10

• "set the restart target action" does not work, why?

  There is an element of "set the restart target action" in the SDF file. I put it to "run a system definition.

  

  But it does not work. I don't know why. It seems that when the project is canceled, the SystemDefinitionData.nivscfg file is deleted.

  

  Cancel the deployment of will stop the configuration and mark idle.

  If you restart the RT target by HW button or through the channel "System of command channels", while the configuration is active, it will start the Setup again after the reboot.

  Jiri K.

• Effects of Dolby Advanced Audio does not work on Windows 8.1

  Hello

  I've upgraded my HP Pavilion G6 2242sf to Windows 8.1 and the sound quality is not as good as in Windows 8: Control Panel in the equalizer Dolby works but switch the Dolby Advanced Audio check box has no effect, so there is no more virtualization surround and 3 effects 'Movie', 'Music', and 'The voice' don't work anymore.

  Now my computer laptop speakers sounds choppy... Could you help me solve this problem?

  OK I tried a lot of IDT Audio Driver version and I found one that works correctly with Windows 8.1: the 6.10.6482 version. Here are the questions I lived on other versions of this driver:

  6.10.6425 to 6.10.6466 : Dolby effects working correctly, by speakers is good, but in the headphones sound is not "strengthen". Equalizer does not work.

  6.10.6491 and more : Equalizer works but other effects dolby (Surround virtualization, Volume Leveler, etc.) does not work and the sound from the speakers of the laptop is low (even at 100%).

  If you have Dolby Advanced Audio V2, 8.1 Windows on your PC and you meet one of these questions, the 6.10.6482 driver is the best for you, because all the features (virtualization Surround, Volume Leveler, equalizer, etc.) works.

  To download: click here and follow the instructions on the screen.

  HP so please update drivers download pages... Ex: 2242sf drivers page, it is only the IDT 6.10.6425 driver for Windows 8.1 while the 6.10.6482 is available on other sites.

• I am trying to reinstall Flash CS4 professional as the script action does not work, but now I get an error: 2 message when I use the original CD to reinstall

  I can't get the original disc work on resettlement.  I get the message

  AdobeColorCommonSetRGB

  Error:

  Error 2.

  I'm teaching a class using this program on Macintoshes running 10.9.5 and action script does not work.  It will work on any program designed by using the 10.8, but if you create an animation on 10.9.5 the action script will not work for buttons

  You must manually remove the color in question profiles... Run the cleanup tool and see if it's to help you get started.

  http://www.Adobe.com/support/contact/cscleanertool.html

  Mylenium

• Game audio action does not work in Captivate 7

  Hello

  On the first slide in my class, I added a "quick start" guide It consists of a series of legends that contains text. In each legend, there is a text link "Continue" triggering a tip action to hide the current legend / show the following. This works perfectly.

  Now, I tried to reach audio at each step of the guide. I added a "audio playback" action after stocks show/hide for the first step. No audio not playing. When I changed the audio of the game to be the first action in the script - the script did not work at all. When I changed it between the show and the skin, leather working and show does not. What I gather from this is that play the audio does not work and also stops all this.

  Any advice?

  Thank you

  Just checked, created an action shared with almost exactly the same commands, but grouped together all the containers in text in a group Gr_TC

  Hide:

  

  It worked perfectly. You don't see a label, because it is a common action, to which I just filled in some settings. Attached to three buttons, had 3 containers of text and 3 different audio clips.

  The audio clip plays when it is used in another way? The only difference seems to be that you have a clip of VO and I used one of the sounds included with Captivate.

  Another way would be to fix the audio on the text as audio of the object container. Once you view the text, audio will play, when you hide the text to stop. It was the way to go before COP6:

  http://blog.lilybiri.com/playtime-with-audio-and-widgets

  Lilybiri

• Advanced conditional action does not work when I add the second condition

  I use CP 8. I can't understand why I'm running on this problem. I have a series of If-Then conditional actions, but I am running into problems. I narrowed down it to this problem.

  It is a simple check box that must show either the box or not.

  

  As long as I have only one condition, it works fine. As soon as I add the second condition, it stops working.

  

  Any suggestions? I appreciate the help!

  Rick and I tried to explain that a conditional action is always executed completely. This is the reason that the second decision has been reset what had been done in the first in your first question. I have a lot of articles on my blog where I point out that bad sequence in the decision (or) is causing most of the problems with conditional advanced (shared) actions.

• Presentation of the action does not work during the Conference

  Hello world

  Here's the background
  -CUCM 10.5
  -Telepresence conductor XC4.1
  -Telepresence Server (VM) 4.2
  -Endpoint: MX300

  I have problem when sharing a presentation at the Conference meeting.
  It doesn't seem to work.
  However, the part of presentation works with success during a normal 2-way call

  I read an article by cisco,
  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/con...

  A field is related to the function of presentation,

  Allow the content
  (Available when the preference of Service has a type of telepresence MCU Conferencing Bridge)
  Whether or not, participants will be able to send video content, such as a presentation.

  Yes: one lane will be reserved on each cascade TelePresence MCU and TelePresence MCU primary specifically for content. Use this setting to enabled WebEx conferences.

  No: the participants will not be able to send content, regardless of the number of ports available on the MCU. Content can always be displayed, since some end points provide content in their main video channel.

  The default value is Yes.

  Need MCU allow sharing feature? or I missed something?

  Thanks in advance

  Sam

  Allow that content is available only when the conference bridge is an MCU and does not apply to a server of telepresence.  The only thing you need to do within the Orchestra, is ensure that "content quality" within the model of the Conference is not set to 'Off', see the top of pg 61 of the guide that you have linked to your post.  Also, make sure you have enabled on the SIP Trunk to driver in CUCM BFCP.

• Audio tour on first visit to several slides except for the first of the slides advanced action does not

  I have 3 different slides in a project who have advanced actions to stream audio on first visit only. When I saw the project, the tip action works only once. Who ever these 3 slides I play first audio aura on the first visit, but the other 2 do not play audio at all. Is it possible that they do not interfere with each other?

  A tip action that I use is less and the others are the same but with different audio files

  

  You need a variable to different entry for each slide.

  v_entry1, v_entry2 and so on.

• Stop(); Action does not work in AS3?

  I am a designer and usually work in AS2.

  But I created a movie in as3 (to use the function of the BONE), and now my actions to stop do not work.

  What I usually do for my movies, it's breaking down the film in some parts of the main timeline (content, start, end), place stops on each of these frameworks.

  And in the clips that play on these labels, I put a call:

  Stop();

  _root.gotoAndPlay ('content') etc...

  in any case none fixed this in AS3?

  I use CS4 if it matters.

  The stop() command works as well in AS3 as it does in AS1/2.  What does work is to use AS2 terms such as "_root".  In general, if a stop() command does not is because another code's fault or otherwise of the substitution of the stop().