JavaScript to convert the mixed string uppercase

Similar Questions

• How to convert the Ascii string containing hex to hex string info?

  Dear all,

  I am busy doing a control/reading program for pumps of ISCO.

  Right now I'm in trouble with to send orders for PUMPS in HEXADECIMAL. When I use a CONTROL to the STRING in HEX display, everything works fine (when I manually write down the command in the control of the chain).

  Exist it a couple of pieces order: string Destination, length, ordering, Checksum. I'm doing a sup - screw that automatically calculates the checksum (modulo 256) and adds it to the string. Everything is going well: first of all, I shared the ascii bytes command and I calculate the checksum and add as ASCII HEXADECIMAL value to the chain of command. Also a CR (= 0d) is added. Now the whole string must be converted to hex. The string contains the right nummers HEX, but they are in ASCII format. Here was I feel worth it, I don't know how to do it!

  So to summarize:

  I have an ascii string that contains the values HEX (for example 315230303652454D4F544531420D) and it must be converted to a HEX string (for instance 3152 3030 3652 454 4531 420 4F54) for the pump of the ISCO can understand the command.

  The VI is attached.

  Thank you in advance,

  Bio

  Bio,.

  This should do what you want.

• Convert the text string into array of words

  I'm trying to convert an input string of sentence written with spaces between words in an array of strings of 1 d with one word in each element of the array.

  That's what I have so far, but his does not work as I would like.   I have trouble getting in the array to zero at the beginning of each series.

  Thank you

  Why don't you just use the String Array to worksheet and specify a space as a separator?

  

• convert the code to UPPERCASE lowercase tags?

  I have my preferences set in DW3 to be "break tag < small > default" and "default case of attribute in tiny = 'value' BUT I inherited a site where there are a lot of random uppercase tags, mixed to lower case in the source." I want that my tags to be lowercase. Is there a way - an extension or something - I'm not here to convert? I tried "Format of Source", but not joy.

  I want things like < / HEAD > BODY, TD or TR etc. to be correctly converted to lowercase.

  Any ideas how I can clean sweep throughout the site and correct cela and don't mess with the contents of the page?

  E. Michael Brandt wrote:

  If you do this to several documents at once (select entire Site, if there is not too much pages, or choose Select the files after you have selected a moderatley large number of files in the file window), they will all open and expect your saving

  In fact, they will not open. When you select the option search and replace throughout the site, Dreamweaver warns you that changes to files that are not open cannot Ωtre annulΘe. Dreamweaver made all the changes to files closed in silence.

  Given that the different tags and attributes are involved, to help find and replace is likely to be a long and tedious process. A simple way to convert all tags and attributes to lowercase without affecting the content is to select file > convert > XHTML 1.0 Transitional. If, for any reason, you do not want to use XHTML, select file > convert > HTML Transitional 4.01 after conversion to XHTML. This will remove the specific XHTML markup, but leave the tags and attributes to lowercase (even if the handlers like onload will be converted to onLoad). Unfortunately, this only works on individual pages, but this is done by updating a site in a quick and painless way.

• Convert the hexadecimal string of Little Endian floating-point single precision

  I made a lot of tinkering and research, but despite all the very similar examples, I found, I think that I am limited by my lack of knowledge in programming. I gives me values such as 0000c 641 I need to convert to 41C60000 who must convert single precision IEEE754 to 24.75 as a standard 32-bit float. I saw very similar examples with boxing and unboxing conversions, but I simply can't understand it. Thank you.

  OK, so if you have actual letters coming, there are a few ways that you can do. You can basically change the string in order to get in order waiting for LabVIEW. Otherwise, you can do the same using data manipulation functions:

  

• Convert the data to uppercase (upper/lower case text

  I have data in the field as
  ABERCHROBIE FITCH - like this
  
  I want to change all the data in the field, as
  Aberchrombie Fitch - first letter should b in the capital and all the remaining letters should be in small.
  
  
  Ex:
  FITCH-> Fitch
  Concat (Upper (Left(columname,1)), LOWER (SUBSTRING (columnname OF 2 for LENGTH (columname)))
  
  ABERCHORMBIE FITCH Aberchrombie - Fitch
  ?
  
  AMERICAN EAGLE-> American Eagle
  ?
  ....
  
  can someone help me change the first letter to the capital and the remaining letters to small
  
  Published by: user12255470 on October 18, 2010 18:49

  user12255470,

  under fx, apply the formula: LOWER (your column)---> the result which is "abercrombie fitch.
  now go to "Properties of the column" and select "additional formatting" options > check "Use CSS Custom Style" & put the style according to

  text-transform: capitalize;

  If the answer points please :-)

  -bifacts
  http://www.obinotes.com

• Convert the string with number of floats a number

  How to convert the string as "- 8.9E - 03" to a number of TestStand?

  Thanks in advance

  Hello

  Try to use the Val() function

  In the expression, it looks like this

  People of the country

  .nValue = val (Locals.strValue)

  Locals.nValue = Val("-8.9E-03")

  Hope this helps

  Jürgen

• Convert the number to a HEXADECIMAL 4-digit string

  Hello

  I would like to know if it is possible to convert a number to a HEXADECIMAL string 4 digit.

  Now I convert the number to a table with ' generation array "and this table that I convert it with an"array of bytes to a string.

  While when I type in the number 30, the channel will show 1E (HEX, 2 digits).

  But when I type a number greater than 255, it continues to show FF (255)

  If I do the 'picture to build' bigger and add an element, the string indicates a 4 digit Hex number.

  Now, I would like to know how I can show one number, greater than 255 in the chain with 4 digits.

  So I actually need to divide the number in 2 tables before building the table, isn't it?

  I hope that you understand my purpose?

  So when I type in "1235", I want a string indicating "04E5" and not "FF".

  The function that you want to use is number to a hexadecimal string. Set the width of 4

  

  http://zone.NI.com/reference/en-XX/help/371361H-01/Glang/number_to_hex_string/

  Moreover, 0x04E5 is decimal 1 253

• How to convert the string with numbers in U8 with ascii

  Hello

  I have a string with only numbers 0. 9 paper.

  Now, I want to convert to table-U8.

  He works here, but now the problem: How can I change each character to its ascii value?

  Example:

  entry: 123 (string)

  output: x 31, x 32, x 33 (U8-array)

  Thanks for the help

  It's very easy

  String to Byte Array Function
  Have the Palette: string/array/path Conversion functions

  Converts a string to an array of unsigned bytes. Each byte in the array has the ASCII value of the character corresponding to the string.

• How do to convert the string (with the Hex data) in number?

  Hello

  I use TestStand 3.5 to automate a few test cases associated with boot loader.

  The requirement is that I need to read the value in some places for specific address. The values of these addresses are stored in a hexadecimal format.

  We have a step customized in TestStand through which we can read these values by address, but she returns as the type "String".

  For example, the value to 0 x 0000008 is 000001 B 2, and he returned in Locals.Value_Read as "000001 B 2" in the string.

  Is it possible, I can convert the string "000001 B 2" to a number?

  I tried to use the function-> val (locals. Value_Read), but it is return 0 as TestStand figures that the input string is not representing the valid number.

  Please help me with this.

  Thank you and best regards,

  Niraj.

  Try: Val ("0 x" + Locals.Value_Read)

• How to convert the binary value to a binary string in labview?

  Hi all

  I need to convert the binary value to a binary string. We have decimal or hexadecimal or octal number to decimal string, hexadecimal and octal string

  Hi pgm, use the function 'Format to a string. See the attached example. "%b" is the binary number in number in string format specifier.

• How to convert the array of integer to string

  Hi, I'm trying to convert the table of 32-bit integers to a string. For ex: If the array contains {1234, 4567, 8, 9} I need string like {00.00, 34,12, 00, 00, 45, 67,...}

  How to do this one.

  Help, please

  Thank you best regards &,.

  Harish. G.

  Hi Haris,

  use the above solution as it seems you really want figures BCD...

  Or this slightly improved version:

  

• Get the phone number of mixed string

  Hello

  I'm new to the development of BB and I can't seem to understand this.

  What I want to do is to take a mixed string (the event details for a google calendar event) and get a string that contains something that looks like a phone number. It seems to be already features to recognize the phone numbers of a string there are things like ActiveRichTextFields, and I can get my BB to highlight these regions 'active', but I can't get this phone in a separate channel number.

  I'm totally lost on this, any help would be appreciated.

  Welcome to the forum.

  I'm not aware of any API that allows to determine what parts of a string BlackBerry will recognize by default.  I have never seen this in a field that is displayed on the screen.

  My first reaction is that you have to watch yourself to find these special criteria.  I hope that others have an opinion / a different option.

• convert the string to type vCAC:vCACHost

  Hi all

  
  I have a client that wants to start a flood of vCO from an external source using the REST API of vCO. One of the arguments sent to the vCO workflow that will trigger, is the vCAC hostname.

  My question is - since the arguments acts as a channel of appeal REST, how to convert into a vCAC:vCACHost object in order to be used in a script in my stream.

  
  Thank you.

  Your customer can either pass a string representing the object to the REST API as described in this tutorial.

  Otherwise they can pass a string containing the host id and get the object vCACHost in the workflow like this:

  var vCACHosts = Server.findAllForType("vCACHost");
  
  for each (var vCACHost in vCACHosts) {
    if (vCACHosts.id==histId) {
     var matchingHost = vCACHosts;
    break;
    }
  }
  

  If there were many guests then I recommend using the entityManager to filter by ID and then by converting the entities back to object with the getInventoryObject() method as described in this article.

  1 problem, 3 solutions

• Is it possible to convert the selected text in javascript lines?

  Hi all

  I put a word to indesign cs 5.5 file is almost in a single table, I need to separate the text of the actual tables, is it possible to convert the selected text in javascript lines?

  If there is no way to do that, someone can help me to make a script to cut selected lines and place it in the right holders of the table pointer to make independent table and then convert to text?

  Hey brother,

  Simply select the rows or cells represent the lines and then run this Javascript code snippet:

  for (var r = 0; r < app.selection.length; r++) {
      for (var t = 0; t < app.selection[r].rows.length; t++) {
          for (var u = 0; u < app.selection[r].rows[t].cells.length; u++) {
              for (var c = 0; c < app.selection[r].rows[t].cells[u].paragraphs.length; c++) {
                  app.selection[r].rows[t].cells[u].paragraphs[0].move (LocationOptions.AFTER, app.selection[r].rows[t].parent.parent.storyOffset);
                  if (c < app.selection[r].rows[t].cells[u].paragraphs.length - 1)
                      app.selection[r].rows[t].parent.parent.storyOffset.contents += "\r";
              }
              if (u < app.selection[r].rows[t].cells.length - 1) {
                  app.selection[r].rows[t].parent.parent.storyOffset.contents += "\t";
              }
              else {
                  app.selection[r].rows[t].parent.parent.storyOffset.contents += "\r";
              }
          }
      }
  }
  for (var r = 0; r < app.selection.length; r++) {
      for (var t = app.selection[r].rows.length - 1; t >= 0; t--) {
          app.selection[r].rows[t].remove ();
      }
  }