Qosmio G40: Problem with BT DUN connection
Hello
I recently bought the new G40 and I try to use my iPaq HW6515 (with Windows Mobile 2003 SE) as a Bluetooth modem for her.
The problem is that the express installation detects only the PAN profile. When I use the custom installer, he sees the profile of dial-up, but when I try to put the modem (by default at COM40, but he tried it on another one), it is said that there is no modem installed.
After a few seconds, he set up the so-called Toshiba Software Modem (COM3), but after clicking on the button finish, he said still there is no modem installed on COM40. When I change the software Modem of Toshiba to COM40 he finished, but then when you try to dial the number is a message saying there is no signal dial.
Now, I did this sort of thing for a while now with lots of batteries Bluetooth and it has always worked well. iPaq itself installed as a Bluetooth Modem Standard and number without any problems...
The "Custom" Mode is set much lower. See the following Web site:
http://APS.toshiba-tro.de/Bluetooth/redirect.php?page=pages/HOWTO.html
to learn in detail how to set up.
In your case, you should look at the following document:
"How to set up GPRS DUN via Custom Toshiba Bluetooth Stack Mode"
Tags: Toshiba
Similar Questions
-
Qosmio G40: problems with webcam and start
Hi everyone, am always lift start 50-50 with webcam when using messenger, even with the tv tuner off. Also get the laptop mystery don't turn on in battery mode, which is cured by reinstalling the battery. Toshiba has indicated that its been to the workshops.
But no miracles at least that any one out there knows everything?A big thanks Steve H
I read many comments on webcam problems run the Microsoft messenger. Only this Messenger made a few worries and is not entirely supported by the driver for the webcam.
An update could therefore help;
Please check this thread:
http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=105364With regard to the battery issue.
Well, it seems in your BIOS options supports the wrong settings.
WAKE-UP ON BATTERY must be checked!Please check this thread:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=28045Best regards
-
Qosmio G40 - problem with the use of 100% of the CPU
In recent weeks I have problem like describbed here: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=126670
Almost the same thing - my computer starts and works ok, but from time to time is frozen by Symantec Service Framwork and all other descriptions are the same.
"After having been inactive during these seconds, the cooling fan will start to operate at maximum power, creating a huge noise, that I never experienced before, not even while the CPU was operating at 100% for a while due to other programs." Force a reboot is all what I can do. »
Almost all accidents that this question was by NIS2008, but also Vista explorer.exe and fingerprinttray service or the service of the Index process.
I received a notice from the team of NIS that I get to use the new NIS09, and for sure that my machine is damaged - check it out here http://community.norton.com/norton/board/message?board.id=nis_feedback&message.id=6964&quer y.id = 22439 #M6964
I called the Service, which has changed the ATV and CPU - I changed to NIS09 after, a few weeks was good, but now the problem back - in the last two weeks twice. (I observe that starts about 5 minutes after download of updates to NIS (I know cos NIS 09 indicator of that time).)
One change - Vista is able to kill that process damaged (Admins have no right to do), starts the process of WeAreFault, which sends information on crash for MS - after about 15 min computer starts to work properly without reboot... so I think that a problem is somwhere on the line between Toshiba and Norton, cos repair also change in behaviour of the machine - is now using work not CPU around 20% - before was 50 to 70% and 100% of crash. Norton is also, but must for this.
Does anyone have a conclusion?
Generally, I don't like Norton because he needs as many resources and make the laptop lazy. On the net, you can find very good alternative applications.
Have you tested how the laptop works after removing the NIS? -
After a problem with a mobile connection, I tried with mozilla to connect to nooz.gr , but I've redirected the page services of vodafone, everytime I try again to open this site specific mozilla still redirects me vodafone support page, how can I regain access to nooz.gr?
Could clear you cookies and cache and check it out.
The problem happened when you connect your mobile connection he tries to display the service vodafone page, and it is not updated because of cookie issue.
Try in safe mode
-
Hi there I have an acer aspire one and I have a problem with my wireless connection.
Hi there I have an acer aspire one and I have problems with my wireless connection.it is connected, but I can't use internet.any thoughts? Thank you
A look at the "front" face, under the lip of the keyboard, similar to where a lock would be on a laptop. There is here a cursor that is not a lock, but it is a switch that activates / deactivates him wireless on and outside. Slide it on until it turns on the light above it (with the logo of the antenna), indicating wireless is turned on and drag it again to turn it off.
-
Problems with the internet connection, Aspire V15 - V3 - 575G
Hi, I bought a new laptop and have problems with the internet connection without having to install other programs.
The problems are the following:
- I use an ethernet cable to connect and just after passing on the laptop, there is no Internet connection at all. I have to restart the router to do.
- When downloading or uploading brokes down at intervals of 30 seconds - 1 minute. It is not always the same. Sometimes it works 3 minutes, but it is not enough.
He has Win10... With my old laptop with Win7, I had no such problems. I do not change ISP.
I don't know what to do to fix it. I have not tried to uninstall Acer applications yet. Have you experienced something similar?
Thank you very much for the reply.
Plese try this:
device, right-click on your network card Realtek Manager choose uninstall and tick to uninstall the software if requested, restart, and then try again to install the downloaded driver.
-
I installed AVG 9.0 and now I get the MSN Explorer pop next message.
You can not connect to your mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.Sure. Analysis of your e-mail anti-virus program:
- Can slow to receive and send messages, or even fail.
- Can damage files of storage for messages that you've already sent and received, making it inaccessible messages.
- Is not necessary. If you receive an infected attachment and try to open it, the protective device in real time of your antivirus program will block the infection.
Here are a few web pages accurately:
Why you don't need your anti-virus program to scan your e-mail
The other threat email: the Corruption of files in Outlook Express
Why some antivirus software can change the settings in e-mail programs
Email scanning - advantages and disadvantages -
I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. Usually, you must configure only once and his game, but I have to keep on my new Dell Precision 6400 reconfigure it. I use downgrade XP on vista.
Hi Susancav,
Welcome to Microsoft Windows Forums!
I'll be your message to the category of xp windows for a better answer. You can always find your message by going to my Threads in the section My Forum links at the top right of the page. http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx
Thank you and best regards,
Bindu S - MICROSOFT SUPPORT
Visit our Microsoft answers feedback Forum and let us know what you think. -
I run Windows Vista. Recently on commissioning the first thing that appears on my screen is a 'Windows Live Mesh' message, "there could be a problem with your internet connection.
connection. Ensure that the computer is connected to the internet and try again".
My computer is connected to the internet, and it works very well. How can I get rid of this annoying message.
I tried all means to find this file on my computer, but it does not appear to be
Can you help me please
Mike Gray
Hello
Were there any changes (hardware or software) to the computer before the show?
Perform the check and the boot if the problem persists.
To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
Note: Follow step 7 to reset the computer to start as usual after the boot process.
Hope that helps. -
Problems with our internet connection
Hello, I have a all in one HP touchsmart PC (running windows 7), and he has problems with our internet connection. I dot know if it is in the right section, but this seems to be the best in the class.
The rest of my house to connect to our router fine (iphone, iPad, computer laptop) except this PC. I CAN connect to the router, but 5 minutes or later, he has a X red on the connection and said "the settings saved on this computer do not match the requirements for the network" I looked everywhere online for this, but it remains stubbornly disconnects every time.
I tried to delete the network and try again, but he still has a red X and the message more each time. I tried to connect and Ethernet cable, still no luck. I am very desperate to solve this problem, because it's what I use for games. Can someone help me please? It would mean the world to me if someone could help me solve this problem.
If you don't mind keeping this Ethernet cable connected, you might have a solid connection if you come to turn off the wifi connection completely and rely only on the cable.
Here's how:
- Press on + R to display the run box, type ncpa.cpl , and then press OK.
- Right click on the wireless network connection and choose disable.
That's all. You can always reactivate if you wish.
-
IM problems with my wireless connection, it says my DNS server does not respond, what is this, can help to somone, thanks
Hello
Thanks for posting the question in the Microsoft Community!
You can't use the wireless connection and the message that the DNS server is not responding.
The problem may occur if the computer is unable to connect to the DNS server.
To check, I suggest you follow the steps:
Method 1: Re-register the DNS
a. Click Start. Type cmd in the search box and press ENTER.
b. at the command prompt, type the following command and press ENTER:
ipconfig/flushdns (there is a space between ipconfig and /)It will display the message properly emptied the cache of DNS resolution.
c. at the command prompt, type the following command and press ENTER:
ipconfig/registerdns (there is a space between ipconfig and /)d. at the command prompt, type the following command and press ENTER:
ipconfig/all (there is a space between ipconfig and /)
The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.
If this is the case, try this:i. enough at the command prompt ipconfig and press ENTER
II. ipconfig / renew in command prompt and press ENTER
The test again by typing ipconfig/all to see what is the address? (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)
Method 2:
a. click Start and then click Control Panel.
b. go to the networking and sharing Center and then click on change adapter settings.
c. right-click on connection to the Local network and select Properties.
d. Select Internet Protocol Version 6, and then click Properties.
e. choose the DNS server to obtain an address automatically , then press Ok.
f. Select obtain IP address automatically.
g. Repeat steps for Internet Protocol version 4 as well.
I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.
-
Having problems with SQL Developer connection to the database on a LINUX machine
Having problems with SQL Developer connection to the database on a LINUX machine
Hello
I am trying to connect my machine to windows 7 Home premium to an oracle database 11 g on RedHat 5 machine using SQL Developer. I got this error on SQL Developer
Status: Failed - Test has failed: the network adapter could not establish the connection
on Linux
and TNSPINGLSNRCTL> status Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1))) STATUS of the LISTENER ------------------------ Alias LISTENER Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production Start Date 03-APR-2013 16:13:13 Uptime 7 days 22 hr. 16 min. 41 sec Trace Level off Security ON: Local OS Authentication SNMP OFF Listener Parameter File /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora Listener Log File /u01/app/oracle/product/11.2.0/db_1/network/log/listener.log Listening Endpoints Summary... (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1))) (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.X.X.X)(PORT=1521))) Services Summary... Service "PLSExtProc" has 1 instance(s). Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service... Service "orc11g" has 1 instance(s). Instance "orc11g", status READY, has 1 handler(s) for this service... Service "orc11gXDB" has 1 instance(s). Instance "orc11g", status READY, has 1 handler(s) for this service... Service "orc11g_XPT" has 1 instance(s). Instance "orc11g", status READY, has 1 handler(s) for this service... The command completed successfully LSNRCTL>
Tnsnames.ora on Linux,tnsping 172.x.x.x TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 11-APR-2013 14:32:17 Copyright (c) 1997, 2005, Oracle. All rights reserved. Used parameter files: /u01/app/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora Used EZCONNECT adapter to resolve the alias Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=172.x.x.x))(ADDRESS=(PROTOCOL=TCP)(HOST=172.x.x.x)(PORT=1521))) OK (0 msec) [oracle@ltebilling ~]$
Listner on Linux,ORC11G = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orc11g) ) )
hosts/ect/Linux,SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = PLSExtProc) (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1) (PROGRAM = extproc) ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1)) (ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521)) ) )
and there is no problem to ping linux from windows# Do not remove the following line, or various programs # that require network functionality will fail. 127.0.0.1 localhost.localdomain localhost 172.x.x.x LTEBilling
Published by: user11309581 on April 11, 2013 15:16user11309581 wrote:
as I have already desciped earlier, I can't connect to the server throw Linux my Windows SQL Server, with error message below.
tatus: failed - Test has failed: the network adapter could not establish the connectionIt's too generic to mean anything. The application is hidden the real error message. You got when you did the tnsping and obtained "TNS-12535: TNS:operation has expired. Now THAT's an error.
This indicates a problem firewall and routing. You said earlier you could ping the server, but now we see tnsping fails. Two different protocols of usage, so that both the successful ping turns out a valid physical path, it guarantees not that all traffic will pass. What happens with
c:\ telnet 172.x.x.x 1521
-
What is the problem with Creative Cloud connection update
What is the problem with Creative Cloud connection update? I tried 25 times to update, but it does not work? Can you please help?
Double-click on the creative process of cloud. which opens another window that contains a button exit.
or, click the process (to select) > click on view > click process to quit. This method brings up a window that contains the two resignation and force them to leave (in the case of quit smoking does not work).
-
Qosmio G10: problem with Port Monitor
Hi all
I have a Qosmio (G10), but I have a problem with the functions of 'Port Monitor-in '. However, I have connected my computer cassette player output ports "port monitor" with the proper cables and jack and get good sound but get no video.
where I go wrong?
Thanks in advance.
Hello
you need to go to "start / all programs/toshiba/utilities/photo Enhancement utility ' and then click 'monitor input parameters'"
choose s-video and monitor-in.Good bye
-
Problem with the network connection security
When I try to view certain websites, I get an error message that says: "there is a problem with the security of your connection Metwork. In addition, a friend just sent me a copy of an e-mail that was sent to him. Apparently, someone must have hacked into my email account, has obtained my contact list, created an e-mail account using my name and sent e-mails to people on my contact list.
How can I fix the problem with the warranty of my network connection, and what I can do on the pirate e-mail contacts list?
Can you give an example of the websites that you see this 'error' on?
Maybe you are looking for
-
Satellite A200 - strange question after updating the graphics driver
The problem is with the driver Mobile Intel (r) 965 Express Chipset Family. System: Grand VISTA 32 bit Home Premium Service Pack 1. Laptop: Satellite A200. I have installed the new driver of this (suggestion by Toshiba TEMPO) source: http://CE.comput
-
Analysis of the order when there is a significant shift of DC signal
Thanks for reading this. I use the Toolkit NI LabVIEW Order Analysis for direct analysis of signals of pledge of deformation of an attachment to a car engine. My goal is to acquire data of a part of the calibrated strain connected to an engine during
-
Parameters of the model in DC (Multisim) one analysis operation points
I have a simple circuit of the series with a current source continuous, the resistance and the LED. I am trying to add the current led to the list of parameters of device to report in an analysis of the operating points, but when I select this settin
-
Folio 9480 m: no control brightness on 9480 m... Tried all that I found
Yes, we have all heard it before. But no solution did work I can find. We have Elitebook Folio 9480 m computers. I'm looking to build a brand around these computers. The only thing that I can never make it work is the function keys shortcuts. Œuvres
-
BlackBerry Smartphones Blackberry Curve... switching on Bluetooth
Hi all... y at - it a shortcut to turn on Bluetooth [only for when I'm driving] without going into the 'options' > 'bluetooth' and could hurt if I left Bluetooth enabled all the time? see you soon