JDeveloper Studio or JDeveloper Java Edition for the Transformation XSLT generator?

Similar Questions

• Available rules for the transformation of the URL in the cartridge 5.9.6 Java

  Dear all,

  We have recently improved our cartridge java Java EE 5.8.3 to servers-Java version 5.9.6 Appliction. We are aware that the 5.9.6 version got some default rules for the transformation of the URL. But as we have upgraded, we are not able to find these rules. Please let us know the default rules available for the transformation of the URL.

  Thanks in advance.

  Kind regards

  Red Amandine

  Hello

  Check if this link under edocs help.

  [See:edocs.quest.com/.../frameset.htm]

  Best regards

  Golan

• Use the java connector for the connector database?

  Hello

  I'm running on IOM 11gr2ps2 and need to use the database connector.  We installed the .net connector server to operate with the connector AD.

  The Oracle of https://docs.oracle.com/cd/E22999_01/doc.111/e20277.pdf documentation gives us an option to either install a java connector server to work with the database connector or install the IOM database connector without using a java connector server.

  The documentation says "execution of a connector on the connector server.

  allows to transmit queries put in service and reconciliation through the firewall in a

  as defined by the connector server.

  As I already have a connector server .net for AD, I would lean towards the installation of the java connector server.  In this way architecture remains consistent.

  Please, share your ideas.

  Thank you

  Khanh

  Table of database connector uses the Java Connector server, or it can be deployed directly in the container of the IOM.  If you have problems jar or different library due to database formats, you can use the connector server to isolate libraries and do not have to figure out how to make IOM in collaboration with several libraries.  It can also take some of the load on your server to IOM for the transformation.  I suggest to use the server connector for the isolation of the newspaper as well.

  -Kevin

• How to share a Windows version of CS6 Master Collection (Student Edition) for the Mac version?

  How to share a Windows version of CS6 Master Collection (Student Edition) for the Mac version?

  I don't know if the swap of platform are supported for editions of the student, but the information needed to make an exchange of platform are available on the link below...

  Product order | Platform, language Exchange

• Any trail version is there for the DPS App generator... ?

  Any trail version is there for the DPS App generator... ?

  Hi Pradeep,

  You can register a test of this new product of Digital Publishing Solution at http://www.adobe.com/go/dps , which will allow the use of the web version of App Builder for 30 days. There is no trial available for the previous product in Digital Publishing Suite.

  Neil

• Windows XP Home edition for the satellite A100-337 ethernet controller driver

  No one knows how this laptop ethernet card. I'm looking for a driver for him so that it will work with Windows XP Home edition. Those listed on this site offer unique Vista based ones.

  See you soon

  Hello

  On Toshiba download page that you will not be able to find drivers Windows XP Home edition for laptops pre-installed with the Vista operating system.

  I have google a bit and discovered that your laptop should have card LAN Intel Ekron-R (82562GZ). Try to visit the Intel support page, maybe you can download driver for Windows XP Home edition operating system.

  Good luck!

• Restore Vista Premum (32-bit edition) for the new hard drive from the laptop when original disks are lost?

  Hello

  I'm trying to upgrade from my son's laptop computer and want to replace the current drive with a much larger.

  It is running Vista Home premium Edition (32 bit) and he lost his records came with the laptop: I can do?  I bought Windows 7 Upgrade and a disk hard sata 500 GB, but I need to get Vista on the new drive before Windows 7 readers.

  I backed up the data using Windows Easy Transfer for issue restores the operating system.

  Please note that this is a laptop, I can only have a hard drive up both and I don't know how to get the operating system to the new blank disc? I can create a recovery on a DVD disc / C or something Vista or a 3rd party utility?

  Any help is greatly appreciated!

  Contact the manufacturer to see if you have a recovery Partition and if it can create recovery discs.  If so, create the recovery disks and you will be able to use them to restore the system to factory conditions once you have installed the new drive (but you may need to install the new Vista compatible drivers for the new drive as the recovery disks can have only those for the old disk).  Otherwise, contact the manufacturer and get a set of recovery (at a modest price) discs and use them to restore the system to the conditions of the plant on the new drive.  When we talk to them, confirm that their recovery process allows you to install new drivers for the new drive hard during the process and exactly how do (or it doesn't work - so be sure to check it out).  We cannot help you with recovery of the manufacturer process as it their not Microsoft.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I'm done editing to develop; How to save pictures edited for the web?

  
  I get the import options and the development of Lightroom, but I learned from a representative of LR when I asked for help that LR does not store any data.  So, if I import pictures from my camera (NEF files) and edit to develop; where can I save the modified pictures and how to adjust them for best quality on the web?  It seems that there are instructions on how to import and save photos from your camera, etc, but once you change the photo to help develop it, is the original and so changed?

  Sorry for the question, but I have changed several pictures using the develop and doesn't like to lose all my work.  I am lost as what to do now to save my changes.  Ugh!

  Thanks to anyone who can help!  I am a user of Windows MC if that helps.

  Assembly to develop is completely non-destructive. All your develop settings are automatically saved in the database (catalog) LR

  For web use select thumbnails concerned of your pictures in the library, and click Export. Choose jpeg, size, quality and resolution of 72 and set color space to sRGB. Add sharpening if you wish. Choose a folder and subfolder or export Office. Your jpeg copies will be ready to download from the folder chosen when the export is completed.

• Editable for the customer model?

  Is there such a thing as building a model in Illustrator so that the client can change the text to this topic?  A bit like an on a Web site content management system?

  If so, what the customer would be able to use to edit in?  Of course, the customer want little or no fees.

  Thanks in advance!

  Is there such a thing as building a model in Illustrator...

  He did all the time using Illustrator (or most other graphics programs can export to PDF) in combination with Acrobat.

  1. draw the work in Illustrator (or other). All except the text that should be editable by the end user.

  2 export to PDF.

  3. open in Acrobat Pro.

  4. Add text fields.

  5 activate the PDF for Reader Extensions.

  The recipient can now simply open the PDF in Reader, change the text in the fields and save a copy of the PDF file with the changes intact.

  JET

• Passing an array as a parameter of java (java controls) for the stored procedure

  Hello
  
  I use java controls (BEA Weblogic Workshop 8.1) to call a stored procedure and send an array as a parameter to the stored procedure of java. The following code throws an exception 'Fail to convert the internal representation.
  
  Java code
  import com.bea.control.DatabaseControl.SQLParameter;
  
  Here I create the java
  int [] = {12,13,14} javaArray.
  
  The code below is used to create the table from sql to oracle for the procedure
  SQLParameter [] params = new SQLParameter [1];
  Object obj0 = javaArray;
  params [0] = new SQLParameter (obj0, oracle.jdbc.OracleTypes.ARRAY, SQLParameter.IN);
  
  the code below calls the myFunc in file OJDBCtrl.jcx
  String success = dbControl.testFunc (params);
  
  OJDBCtrl.jcx
  /**
  * @jc: = sql statement ' call CMNT_TST_PROC (?)).
  */
  String Myfunc (SQLParameter [] param);
  
  The stored procedure that is used:
  
  SL_tab IS NUMBER TABLE INDEX BY PLS_INTEGER;
  Procedure cmnt_tst_proc (cmnt_tst sl_tab);
  Procedure cmnt_tst_proc (cmnt_tst sl_tab) is
  BEGIN
  dbms_output.put_line ('Hello');
  END;
  
  
  I'm getting the following exception
  
  Failure = Java.Sql.SqlException: Internal failure to convert the representation: [I@438af4 [ServiceException] >]
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:162)
  at oracle.jdbc.driver.DatabaseError.check_error(DatabaseError.java:861)
  at oracle.sql.ARRAY.toARRAY(ARRAY.java:210)
  at oracle.jdbc.driver.OraclePreparedStatement.setObjectCritical(OraclePreparedStatement.java:7768)
  at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:7449)
  at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:7837)
  at oracle.jdbc.driver.OracleCallableStatement.setObject(OracleCallableStatement.java:4587)
  at weblogic.jdbc.wrapper.PreparedStatement.setObject(PreparedStatement.java:244)
  at com.bea.wlw.runtime.core.control.DatabaseControlImpl._setParameter(DatabaseControlImpl.jcs:1886)
  at com.bea.wlw.runtime.core.control.DatabaseControlImpl.getStatement_v2(DatabaseControlImpl.jcs:1732)
  at com.bea.wlw.runtime.core.control.DatabaseControlImpl.invoke(DatabaseControlImpl.jcs:2591)
  at com.bea.wlw.runtime.core.dispatcher.DispMethod.invoke(DispMethod.java:377)
  at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:433)
  at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:406)
  at com.bea.wlw.runtime.core.container.Invocable.invoke(Invocable.java:249)
  at com.bea.wlw.runtime.jcs.container.JcsContainer.invoke(JcsContainer.java:85)
  at com.bea.wlw.runtime.core.bean.BaseContainerBean.invokeBase(BaseContainerBean.java:224)
  at com.bea.wlw.runtime.core.bean.SLSBContainerBean.invoke(SLSBContainerBean.java:109)
  at com.bea.wlwgen.StatelessContainer_ly05hg_ELOImpl.invoke(StatelessContainer_ly05hg_ELOImpl.java:153)
  ...
  
  Can you please let me know, what am I doing wrong and how can I pass an array to a procedure/function using java controls.
  
  Any help will be much appreciated.
  
  
  
  Published by: user12671762 on February 24, 2010 05:03
  
  Published by: user9211663 on February 24, 2010 21:04

  Try using an oracle.sql.ARRAY with a nested table or varray instead of a table index. Create the type SQL and Java object as follows

      SQL> create type sl_tab as varray(3) of integer;
      Java:
          ArrayDescriptor ad = ArrayDescriptor.createDescriptor
              (".SL_TAB", java.sql.Connection);
          Object elements = new Object[3];
          elements[0] = new Integer(12);
          elements[1] = new Integer(13);
          elements[2] = new Integer(14);
          oracle.sql.ARRAY array =
              new oracle.sql.ARRAY(ad, oracle.jdbc.OracleTypes.ARRAY, elements);
          SQLParameter[] params = new SQLParameter[1];
          params[0] =
              new SQLParameter(array, oracle.jdbc.OracleTypes.ARRAY, SQLParameter.IN);
          String succ = dbControl.testFunc(params);
  

  I don't think that you can pass an array of Java, this is why you have more success using an oracle.sql.ARRAY with a SQL varray. -Michael-

• Satellite A300-203 - need drivers in Windows XP Home edition for the HDMI output

  Hello world!

  Given the poor performance of Vista, I decided to install XP on this machine. I installed all the drivers (from the Toshiba Site) available for my laptop XP, everything is a work, * but HDMI Out does not work *.

  I tried to install the driver Vista 'HDMI CONTROL MANAGER' (XP specific drivers for the hdmi not available on the toshiba support site). HDMI worked after that on my TV but then I got a blue screen, the operating system crashed. I decided to uninstall the driver again just in case.

  Is there a solution to get the HDMI out works under XP? A good pilot? Something reliable?

  Thanks for your help!

  Greetings from the Spain

  Hello

  My U400 supports HDMI port and I installed Win XP on it.
  I didn't install any control HDMI for Vista Manager
  It was not necessary!

  My Win XP is updated, I installed the graphics driver and all the other drivers, the tools available for Win XP!
  That was enough to get the job of HDMI

  You must ensure that your BIOS is up to date.
  In addition, you must install common Module utilities, controls and don't forget that your graphics driver is up to date!

  Then, you would be able to use the FN + F5 to switch to the TV

• Adobe DC Java Script for the population of conditional field

  I have to write a script in a form that will be contained in a text box and populated by one based on the user by checking a box

  Scenario of

  A form contains two sections, there are two sections Head Office information and accounts payable.  The user saves the headquarters address information for example the street address, city, province, PC, etc.  one moves to section 2 two to record accounts payable information.  The Department accounts payable may be located to one address which is not at the headquarters.  There is a check box labeled "same as headquarters" by checking the box that the user is to identify that this is the same address and I want the form automatically fill the street address, city, province, PC already filled in the section of headquarters.  If the user does not identify the address is the same as the location of the headquarters, the user must manually register the information.

  Is not not a technical developer I'm lost, I tried many sites.  I really miss adobe lifecycle designer and the previous method to create actions.  Help, please!

  My JavaScript to date (sorry it must look not so good):

  this.getField("Same").value;

  If (Same.value! = null) {APStreetAddress.value = HOStreetAddress.value}

  This kind of thing can become a little complicated depending on exactly how you want it behaves. It's simple if you only need the script that will be triggered when the check box is selected, in which case the script of mouse upwards to the box could be:

  Script mouse upwards to the box

  (function () {}

  Do nothing if this check box cleared ix.

  If (event.target.value = 'Off') return;

  Copy the values from the previously filled (probably) the text for the other fields.

  getField("APStreeAddress").value = getField("HOStreeAddress").valueAsString;

  getField("APCity").value = getField("HOCity").valueAsString;

  getField("APPostalCode").value = getField("HOPostalCode").valueAsString;

  Add code to the other fields here

  })();

  Just be sure to use the names of real field.

• Photo editing for the result of the Final of YouTube HD Widescreen

  Hello

  I'm trying to put a picture in my film. I wonder if someone can help me to create a standard procedure for the Assembly of my photos to fit in my most common preset.

  I make YouTube videos.

  I am shootinh video in full HD with 1920 x 1080 with a Canon HF20.  I then choose the preset AVCHD 1080 p 30.

  At first the picture was great swells and zoomed, then I chose something that actually fit to the screen.  But now it is not wide enough.

  

  Properties of the current Image

  

  Thank you

  Robby

  In the Options panel effect/having every item in your default installation. Click the item in the timeline panel, go to the effect controls panel / and modify the scale parameter.

  

• What is the Java code for the symbol ' # ' "end of the cell?

  Thank you first of all!

  I'm doing a script to delete tabs and spaces right before paragraph return and end of table cells symbols "#".

  I can get the paragrahs (\r) to work, but I don't have a clue as to what the code is for the end of the table cell symbol #.

  Help, please.

  Bill Bernhardt

  Publications of Doosan

  Old dog trying to learn new tricks!

  Use the end-of-section marker, \Z:

  app.findGrepPreferences.findWhat = "\\s+\\Z";

  app.changeGrepPreferences.changeTo = "";

  Peter

• for the archive sequence # generated two days back

  What is point of view? script to check the archives (sequence #) generated two days back and are applied in settlement by then delete?

  Hello..

  I guess it would make on primary: -.

  select THREAD#, SEQUENCE#,COMPLETION_TIME,APPLIED,DELETED from  V$ARCHIVED_LOG where completion_time between '31-OCT-09' and '02-NOV-09'
  

  [http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/dynviews_1016.htm#REFRN30011]

  [http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/manage_ps.htm#i1035245]

  NOTE:-change according to your need.

  HTH
  Anand

  Published by: Anand... November 2, 2009 10:48