Photo editing for the result of the Final of YouTube HD Widescreen

Similar Questions

• ICloud using photo library for the first time

  I am considering switching to iCloud photo library for the first time - mainly so I'll be able to use the new functionality of memories in iOS 10. However, I have quite a large library of Photos on my Mac and I'm worried about the mistakes of synchronization, bugs and any damage my irreplaceable photos. I have a Time Machine backup, but each backup on which generally only lasts a week or so, and with a large library of errors can take some time to appear. Should I be worried? Are there precautions I need to take?

  In view of all the people who use it, there are very few messages on issues. Since you have a backup, you can still recover. You can consider to get a 2nd external and make a copy of your photo library in order to have 2 backups. Depending on the size of your library, you may need to purchase additional iCloud storage as free storage space is 5 GB. With a large number of photos, it will take much time to complete the synchronization. Some people have posted their s took 2 to 4 weeks. Our respective synchronization went well and we had no problem.

  Downgrades and upgrades of storage

• What is the best photo paper for the Canon MX860?

  What is the best photo paper for the canon mx860? I have the Hammermil copy of photo paper but I don't think it's the right paper for your printer

  Hello Kolourl3lind,

  The following Canon photo papers are recommended for use with the PIXMA MX860:

  Photo Paper Pro Platinum
  Pro II photo paper
  Photo paper glossy 'daily use '.
  Photo glossy paper
  Photo Paper Plus Glossy II
  More glossy photo paper
  Matte Photo paper
  Paper high resolution
  T-Shirt transfers
  Photo stickers

  These photo papers, and other accessories for the printer, can be purchased online at Canon here Shop:

  http://shop.USA.Canon.com/shop/en/catalog/accessories/PIXMA-MX860-wireless

  I hope this helps!

• JDeveloper Studio or JDeveloper Java Edition for the Transformation XSLT generator?

  Do you need to 'JDeveloper Studio' or 'JDeveloper Java Edition' for the manufacturer of processing XSLT?

  The fact is that the Java edition is much smaller, so if you just use it to run the XSL Mapper, then, the Java edition could be a better option.

  Here is the solution, if you install JDeveloper 11 g 'Java Edition' and check the version installed in 'About' you will see (example):

  -Oracle IDE 11.1.1.9.40.66.73

  If you try to install any version of the SOA Composite Editor, you will get the message:

  Impossible to install this update. It requires other extensions that are not installed, or that are installed, but incompatible:

  -oracle.studio min 11.1.1.9.40.66.73 = not installed

  -oracle.j2ee min 11.1.1.9.40.66.73 = not installed

  So the conclusion is that you must install JDeveloper 'Studio' version.

  / Stéphane.

• How to share a Windows version of CS6 Master Collection (Student Edition) for the Mac version?

  How to share a Windows version of CS6 Master Collection (Student Edition) for the Mac version?

  I don't know if the swap of platform are supported for editions of the student, but the information needed to make an exchange of platform are available on the link below...

  Product order | Platform, language Exchange

• I'm done editing to develop; How to save pictures edited for the web?

  
  I get the import options and the development of Lightroom, but I learned from a representative of LR when I asked for help that LR does not store any data.  So, if I import pictures from my camera (NEF files) and edit to develop; where can I save the modified pictures and how to adjust them for best quality on the web?  It seems that there are instructions on how to import and save photos from your camera, etc, but once you change the photo to help develop it, is the original and so changed?

  Sorry for the question, but I have changed several pictures using the develop and doesn't like to lose all my work.  I am lost as what to do now to save my changes.  Ugh!

  Thanks to anyone who can help!  I am a user of Windows MC if that helps.

  Assembly to develop is completely non-destructive. All your develop settings are automatically saved in the database (catalog) LR

  For web use select thumbnails concerned of your pictures in the library, and click Export. Choose jpeg, size, quality and resolution of 72 and set color space to sRGB. Add sharpening if you wish. Choose a folder and subfolder or export Office. Your jpeg copies will be ready to download from the folder chosen when the export is completed.

• Windows XP Home edition for the satellite A100-337 ethernet controller driver

  No one knows how this laptop ethernet card. I'm looking for a driver for him so that it will work with Windows XP Home edition. Those listed on this site offer unique Vista based ones.

  See you soon

  Hello

  On Toshiba download page that you will not be able to find drivers Windows XP Home edition for laptops pre-installed with the Vista operating system.

  I have google a bit and discovered that your laptop should have card LAN Intel Ekron-R (82562GZ). Try to visit the Intel support page, maybe you can download driver for Windows XP Home edition operating system.

  Good luck!

• Restore Vista Premum (32-bit edition) for the new hard drive from the laptop when original disks are lost?

  Hello

  I'm trying to upgrade from my son's laptop computer and want to replace the current drive with a much larger.

  It is running Vista Home premium Edition (32 bit) and he lost his records came with the laptop: I can do?  I bought Windows 7 Upgrade and a disk hard sata 500 GB, but I need to get Vista on the new drive before Windows 7 readers.

  I backed up the data using Windows Easy Transfer for issue restores the operating system.

  Please note that this is a laptop, I can only have a hard drive up both and I don't know how to get the operating system to the new blank disc? I can create a recovery on a DVD disc / C or something Vista or a 3rd party utility?

  Any help is greatly appreciated!

  Contact the manufacturer to see if you have a recovery Partition and if it can create recovery discs.  If so, create the recovery disks and you will be able to use them to restore the system to factory conditions once you have installed the new drive (but you may need to install the new Vista compatible drivers for the new drive as the recovery disks can have only those for the old disk).  Otherwise, contact the manufacturer and get a set of recovery (at a modest price) discs and use them to restore the system to the conditions of the plant on the new drive.  When we talk to them, confirm that their recovery process allows you to install new drivers for the new drive hard during the process and exactly how do (or it doesn't work - so be sure to check it out).  We cannot help you with recovery of the manufacturer process as it their not Microsoft.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Editable for the customer model?

  Is there such a thing as building a model in Illustrator so that the client can change the text to this topic?  A bit like an on a Web site content management system?

  If so, what the customer would be able to use to edit in?  Of course, the customer want little or no fees.

  Thanks in advance!

  Is there such a thing as building a model in Illustrator...

  He did all the time using Illustrator (or most other graphics programs can export to PDF) in combination with Acrobat.

  1. draw the work in Illustrator (or other). All except the text that should be editable by the end user.

  2 export to PDF.

  3. open in Acrobat Pro.

  4. Add text fields.

  5 activate the PDF for Reader Extensions.

  The recipient can now simply open the PDF in Reader, change the text in the fields and save a copy of the PDF file with the changes intact.

  JET

• My photo stream for the photo library on external drive?

  When I used iPhoto, I remember to access the album of my photo stream on the iPhoto library, that I had on my external hard drive.  Is it still possible to do it with the new application Photos?

  Yes - MPS will import the system library, which can be internal or external drive (must be available via a fast wired connection and format mac OS extended (jourmnaled)

  LN

• Satellite A300-203 - need drivers in Windows XP Home edition for the HDMI output

  Hello world!

  Given the poor performance of Vista, I decided to install XP on this machine. I installed all the drivers (from the Toshiba Site) available for my laptop XP, everything is a work, * but HDMI Out does not work *.

  I tried to install the driver Vista 'HDMI CONTROL MANAGER' (XP specific drivers for the hdmi not available on the toshiba support site). HDMI worked after that on my TV but then I got a blue screen, the operating system crashed. I decided to uninstall the driver again just in case.

  Is there a solution to get the HDMI out works under XP? A good pilot? Something reliable?

  Thanks for your help!

  Greetings from the Spain

  Hello

  My U400 supports HDMI port and I installed Win XP on it.
  I didn't install any control HDMI for Vista Manager
  It was not necessary!

  My Win XP is updated, I installed the graphics driver and all the other drivers, the tools available for Win XP!
  That was enough to get the job of HDMI

  You must ensure that your BIOS is up to date.
  In addition, you must install common Module utilities, controls and don't forget that your graphics driver is up to date!

  Then, you would be able to use the FN + F5 to switch to the TV

• Please sony MAKE a PROFILE PHOTO DIARY for the FS-100. We need an upgrade

  It's too bad that Sony will not be updated the firmware for the fs-100, giving this machine the S - Log!

  BUMP!

• Several uses for the final product, need help with Render & output parameters

  Aloha, this is my 1st time in this forum... posted this question in Premier Pro and has been mentioned here.

  I created an effect straight project. I want to make four 4 very specific uses.  Unfortunately, I don't know anything about these formats to be given options in AE - CS4.  One of the many 'rendering settings' and 'output module' settings 'make model '.  This seems the best option for me given my future use: 1) for the DVD; (2) for electronic mail; (3) for YouTube. (4) my web site.  I read and reread the rendering and export options in the manual of use-AE CS4 without success in understanding what each option should be used for.  I need help in the translation of pixelpicker-talk.

  Can someone help me about these accurate "rendering settings" and "output module" parameters listed in AE in the option "make and model"?

  Thanks a lot... come visit the watrer is warm and clear as always.

  KonaDon

  I understand - I think the article using After Effects is a very complete resource, explaining the various features and their purposes. But the real world is full of special cases that are very difficult to address in a manual. In addition, it is a moving target. Different best options today probably the best choice, next year.

  Let's see if we can help here:

  1-. DVD: on the technical side, it is always MPEG-2. A very specific taste of MPEG-2. But while After Effects will let you export a file of this type (choosing the MPEG - 2 DVD is predefined in the output Module), it is also true that most of the applications (such as Adobe Encore DVD) DVD authoring are very friendly in terms of letting you wear one (ideally, uncompressed) Quicktime or AVI (which in no way is compatible DVD) and do the encoding in MPEG-2 for you. So it is up to you: you can encode EI using the preset DVD MPEG-2, or you can use an application of coding specialized (such as Adobe Media Encoder in stand-alone mode) or simply let the DVD authoring application do the encoding for you. This should be very simple and in this case, you can simply render a Quicktime or AVI file without loss (there is a model of output Module called "Lossless" who will take care of everything. You can use the default value, the 'best' model to make settings in most cases).

  2-. E-mail: on the one hand, you need something that is really light and as good quality as possible. In the other, you want something universal compatibility, which can be read in all or almost all computers. H264 (advanced version of MPEG-4) format is really good in terms of efficiency, but its ' adoption is perhaps not as widespread yet. Flash Video (FLV) is really good in this regard. In this case, you could choose Adobe Flash Video (FLV) as the format in the output Module and then choose preset FLV 'Flash 8 web small' for this purpose.

  3 YouTube: it's not that simple. The ideal format for YouTube is not quite exist, they insist on the re-encoding each file that you download, even if your file is technically identical in every way to their versions. So what you want here is something that looks good and it isn't huge to download. This all spells 'H264', in my opinion. The details depend on the question of if your Composition is HD or SD, 4:3 or 16:9, etc. Strange as it may seem, the big "iPod" preset for the format H264 is a good starting point. You can customize it to increase the speed of transmission a little (maybe 2 or 2.5 Mbps, against 1.5 Mbps).

  4 website: even once, you need something that most people already have in their computers. Flash Video is an excellent choice, since about 98 percent of users have the Flash plugin. But in this case, you can have more great heights and flow rates, so you can use the "Flash 8 big' defined by default as a starting point. Once the Flash 10 plugin (which now supports the H264 in addition FLV) spreads in the future, you could standardize on H264 in a delivery format, with different settings for each type of destination.

  I hope this helps.

• Previews - allows you to use or not for the final export

  First of all, I read through the success of forum type "Use Previews" and clicking on ask now.

  I read an article written by Todd Kopriva who said: it is not recommended to use previews for final export declaring may result in low-quality final output

  I read this thread, that says the same thing: "for help to" use found "button is recommended?" "over"

  I'm a bit confused.

  I treated video and RGB curves applied to the AVCHD video effects - and it shows a red bar on the time line. I obviously can't read in real time.

  So what I chose is

  -Rendered effects in the work area, on all the clips, do not change the settings of the sequence, that is to say with the help of full resolution etc.

  -export the timeline with the control to use Previews

  Since my previews are rendered with the same resolution as the source, their use in exports, should cause no loss of resolution, according to my understanding. Is this correct?

  I apply these effects to 3 angles of camera extends over 3 hours (sorry, I know) and I wanted to do a final output of the multicam sequence.

  So I thought about these 2 approaches:

  approach 1:

  -adjust the effects on the clips to my satisfaction

  -disable them on timeline of source (leading to the Green/no rendering bar that will allow me to read RT without problem)

  -create the sequence of them multicam

  -go to each element in the sequence multicam and re - activate the effects and then the kickoff of the exportation on the multicam sequence

  approach 2:

  -adjust the effects on the clips to my satisfaction on each clip and get to the help of resolution and the enlarged image (to allow RT playback in sequence multicam)

  -create the sequence the clips multicam

  -then the kickoff of the exportation on the multicam sequence

  With these two approaches, I ran into issues with CS6, that once I closed the project and re-opened, agency link lost for rendering files - as well as timelines returned to red and there is no way I can re - link preview files.

  (I posted this on the forum here)

  so, I came with the approach 3:

  -adjust the effects on the clips to my satisfaction on each clip and get to the help of resolution and the enlarged image (to allow RT playback in sequence multicam)

  -export each clip using the settings of the source.

  -reimport final clips on the new sequence, then create a multicam them sequence

  -then the kickoff of the exportation on the multicam sequence

  When I play the preview files, obviously I don't see any loss of quality, even in fullscreen, given that I made without changing the sequence settings.

  So, my conclusion is that the use of views to export is not recommended IF previews created using either lesser depth resolution or bit as the source.

  Appreciate someone confirming my thoughts all or remedy.

  The only time where the preview files are useful is when you want to perform a quick export (say for review) where quality is not a problem.

• How to disable the sound of recording at intervals Photo capture for the Sony HDR-AS100V POP Action Cam

  Hello

  Im trying to find out if there is a way to turn off this annoying noise of capture for each photo of the action cam Sony made in mode photo interval. It uses the power of the battery to make the shot so that draws attention / distracted when it is implemented in a public space.

  Please let me know what could be done.

  Installation, configuration, beep, stop program