Job scheduler works is not as planned in 10.2.0.5

Hi guys,.

I have create a scheduler job that will run a stored procedure to kill the database session "SNIPED".

However, the work of the scheduler does not like by expected.

According to my tests, I drop and recreate the tasks Scheduler multiple times, sometimes it will run for the first time, then no more.

But in the view of dba_scheduler_jobs, LAST_START_DATE and LAST_START_DATE keep up to date, showing that the job scheduler works very well, however, he does not kill my session "SNIPED".

Please notify. My tasks in the Scheduler works well in 10.2.0.4 another data base.

FYI, I have try some option like disable and enable the work of the Scheduler window as below but does not work.

Difficulty dbms_scheduler jobs after upgrade | Rameau & amp; #039; s Blog

OWNER JOB_NAME START_DATE REPEAT_INTERVAL LAST_START_DATE NEXT_RUN_DATE JOB_ACTION

---------- -------------------- -------------------- -------------------- -------------------- -------------------- --------------------

SYS KILL_SESSION_JOB KILL_SESSION_PROC 7 APRIL 14 03.38.00.0 FREQ = MINUTELY; INTER 9 APRIL 14 09.38.00.1 9 APRIL 14 09.53.00.0

00000 + 08:00 PM VAL = 15;              25172 AM + 08:00 00000 + 08:00 AM

NOTCHED sessions are KILLED as sessions. They disappear from V$ SESSION after what they're trying to execute a SQL statement.

Tags: Database

Similar Questions

  • How to check if BI Scheduler works or not?

    How to check if BI Scheduler works or not?

    How to check if BI Scheduler works or not?

    Check the log file

    tail-f /OracleBI/server/Log/*NQScheduler.log*

  • Try to run Defrag/Task Scheduler Service, get the message 'Task Scheduler Service does not work' in Windows 7

    I'm trying to defragment my system (Windows 7).  When I go to START and type in "Defragmenter" it states: "the Task Scheduler Service does not work.  "Start the Task Scheduler Service and try again.  When I do, the following message appears: "the remote computer is not found.  Please tell us what to do next.  Thank you.

    Task Scheduler, Windows event log, and the RPC end Point Mapper are included to start automatically?

    Click on the Start button and select Control Panel, administrative tools, Services. Locate the Windows event log in the list. Check that he started and that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started.

  • How to choose a plan of work behind another plan of work? ALT-click work does not (PC)

    I'm going through course Illustrator CC Deke McClelland and a video on the creation and copy of work plans, he uses the tool of the artboard to create a large body of work on top of existing work plans and then shows how to select work plans below by alt-clicking (opt-clicking on Mac) with the work plan on the tool you want to select.

    I tried this exactly like in the video, and although my pointer in the same spinner of Demont, it does not select the below work plans. What happens if it's that if I move my mouse pointer so that a smart guide appears, then alt-click, a new workplan is created. I also note that if I alt-click and drag, a new workplan is created.

    So what is really going on here? Are you supposed to be able to select under other work plans, work plans by alt-click with the tool of work plan? Of course, it works for Deke in the video, but not for me. And why smart alt-click on a guide work plan tool creates a new work plan, while nowhere else alt-click is not?

    I must say that I find it very difficult to determine the intended behavior in many areas of the Illustrator. This is the second course of Lynda.com Illustrator CC I take, especially because I am frustrated at the first course (Justin Seely) of things doesn't work don't not on my copy, as they work in the video. It seems to me therefore azz-back and illogical, and I don't know how it is bugs.

    As a side note, if I alt-click on the button x on a work plan, I get a dialog box saying "the operation cannot complete because of an unknown error. [PARM] "- a bug?

    to select arboards hidden behind other plans of work or not, with the selected work plan tool, move your mouse over the label of Arboard (IE '01 graphic Board 1'), when the pointer turns into a white arrow, click it.

  • Job scheduler runs, QJC + MMN treats missing after reboot!

    Hi guys,.

    I'm on Oracle Database 10 g Release 10.2.0.1.0 - 64 bit Production running a linux server.

    To my dismay this morning, all my Scheduler tasks do not run for 1 week!

    I check the USER_SCHEDULER_JOBS - all are ENABLED
    I check the USER_SCHEDULER_JOB_LOGS - all came...

    but the last logged date is DEC 4!...
    so I went Googling around, checking if JOB_QUEUE_PROCESSES is necessary, but make any that I set the value of a zero or a zero value, jobs are still not built.

    1 thing for sure, manually works running.

    ------------------

    So I went to trace the alert log... December 4 and I saw it...

    < i >
    Fri Dec 4 01:06:33 2009
    Closure of proceedings: in addition to logons disabled
    Fri Dec 4 01:06:46 2009
    Stop process of background CJQ0 <-here
    Fri Dec 4 01:06:46 2009
    Stop background MMNL process <-here
    Fri Dec 4 01:06:47 2009
    Stop background MMON process <-here
    Fri Dec 4 01:06:55 2009
    Closing instance (normal)
    The high waters = 122 license
    Fri Dec 4 08:01:17 2009
    Starting ORACLE instance (normal)
    Fri Dec 4 01:09:21 2009
    Starting ORACLE instance (normal)
    Fri Dec 4 01:26:25 2009
    In the absence of dry 1201 MMNL; First support plans
    < /i >


    I realize that after restart of the database

    (1) the process MMNL not... - start it say absent MMNL for dry 1201; First support plans
    (2) the MMON process does not start...
    (3) the QJC process does not start...


    1st quarter) what should I do? I can't afford to a restart of the database.

    Please notify
    Kind regards
    Noob

    Published by: user12050668 on December 15, 2009 09:27

    If the database process does not start, then I suggest that looking for "absent MMNL" on Metalink or raise a SR. If you use google for this error, you can find some references to bugs and Metalink notes.

  • Has no Job Scheduler executable

    -QUESTION: Do DBMS_SCHEDULER failure. JOB_TYPE = CREATE_JOB > EXE file
    -I am able to get the following code and work to be done if I create under SYS exclusively.
    -The following code will create a job, schedule it, run it and it fails.
    -The credentials are correct, the credentials are for the same server that oracle runs from.
    -Oracle 11.2 on Windows 2003 server.
    -I use the operating system credentials so to my understanding of a domain attribute is not necessary.
    -All cases I saw, it is NOT advisable to use SYS to create and run the tasks so please do not recommending as a work-around.

    CLEARS THE SCREEN

    connect sys / & & sys_password @& & database_name have SYSDBA

    Select to_char (SYSDATE, "the HH24: MI: SS DD/MM/YYYY) double START_TIME;

    DROP USER CASCADE ALPHA;

    CREATE USER IDENTIFIED BY ALPHA ALPHA;

    ALTER USER ALPHA
    DEFAULT TABLESPACE "DCN."
    TEMPORARY TABLESPACE "TEMP".
    RELEASE OF ACCOUNT;

    ALTER USER QUOTA UNLIMITED ON DCN ALPHA;

    GRANT CREATE JOBS EXTERNAL TO ALPHA;
    GRANT CREATE EMPLOYMENT ALPHA;
    GRANT TO CREATE A VIEW ON ALPHA;
    GRANT CREATE ALPHA PROCEDURE;
    GRANT CREATE ROLLBACK SEGMENT TO ALPHA;
    GRANT CREATE SEQUENCE TO ALPHA;
    GRANT CREATE SESSION TO ALPHA;
    GRANT CREATE SYNONYM OF ALPHA;
    GRANT CREATE TABLE FOR ALPHA;
    GRANT CREATE TRIGGER FOR ALPHA;
    GRANT CREATE VIEW TO ALPHA;

    GRANT SDE_VIEWER OF ALPHA;

    DBMS_SCHEDULER EXEC. DROP_CREDENTIAL ('DEV');

    BEGIN
    -Basic credential.
    () DBMS_SCHEDULER.create_credential
    credential_name = > "DEV."
    username = > 'ADMIN',
    password = > "PSWD");
    END;
    /

    GRANT EXECUTE ON DEV to ALPHA;

    SELECT THE USER CREDENTIAL_NAME, SUBSTR(USERNAME,1,16) AS NAME
    OF USER_SCHEDULER_CREDENTIALS;

    CONNECT ALPHA/ALPHA@DCNSDB

    BEGIN
    SYS. DBMS_SCHEDULER. () CREATE_JOB
    job_name = > ' "MKDIR '",
    job_type = > 'EXECUTABLE. "
    number_of_arguments = > 3,
    job_action = > '\windows\system32\cmd.exe ',.
    auto_drop = > FALSE);
    SYS. DBMS_SCHEDULER. SET_JOB_ARGUMENT_VALUE('MKDIR',1,'/C');
    SYS. DBMS_SCHEDULER. SET_JOB_ARGUMENT_VALUE('MKDIR',2,'mkdir');
    SYS. DBMS_SCHEDULER. SET_JOB_ARGUMENT_VALUE('MKDIR',3,'c:\temp\MKDIR_JOB3');
    SYS. DBMS_SCHEDULER. SET_ATTRIBUTE ('MKDIR', 'credential_name','SYS.) DEV');
    SYS. DBMS_SCHEDULER. ENABLE ('MKDIR');
    END;
    /

    connect sys / & & sys_password @& & database_name have SYSDBA

    SELECT JOB_NAME, STATUS, OWNER, LAST_START_DATE FROM DBA_SCHEDULER_JOBS WHERE OWNER = "ALPHA";

    Select to_char (SYSDATE, "the HH24: MI: SS DD/MM/YYYY) double START_TIME;



    SELECT JOB_NAME, STATUS, OWNER, LAST_START_DATE FROM DBA_SCHEDULER_JOBS WHERE OWNER = "ALPHA";
    STATE OF JOB_NAME OWNER
    ------------------------------ ------------------------------ ---------------
    LAST_START_DATE
    ---------------------------------------------------------------------------
    MKDIR ALPHA FAILED
    20 APRIL 11 03.35.49.156000 PM - 04:00

    Any help will be greatly appreciated.

    Published by: LONGENECKER on April 20, 2011 16:05

    Hello

    2 things

    -This error is thrown only if a credential is not used. Make sure that you create the disabled task, assigning to the attribute credential_name then allowing the work.

    -This error usually indicates that the run Scheduler service is not started on windows. Make sure that the OracleJobScheduler Windows service is started.

    Hope this helps,
    Ravi.

  • defrag and chkdsk __will works is not due to a disk volume error__

    Hello. Windows xp home edition. Defrag works is not due to an error of volume and chkdsk is scheduled, but does not. restore only has a point in there for some reason any and tried, but will not fix the problem. ran chkdsk only, would not end because of the mistake of volume. How can I correct the mistake of volume and the chkdsk to run with restart and defragmentation without restore complete system.

    Hello

    Try running chkdsk from the recovery console and then try to make the disk fragmentation.

    Note: /r locates bad sectors and recovers readable information. When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

    a. Insert the Windows XP CD-ROM in the CD-ROM drive and restart the computer.

    Note: Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.

    b. when the "Welcome" screen appears, press R to start the Recovery Console.

    Note: If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.

    c. When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.

    d. at the Recovery Console prompt, type the following command, and then press ENTER:

    Chkdsk /r drive

    e. allow it to run intact until the completion (45 min or more)

    f. report any error

    Take a look at CHKDSK in this article.  http://support.Microsoft.com/kb/314058

    Diana

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Scheduled task does not play if already open WMP, trying to avoid manual close

    I'm in a work centre that will make announcements every day on a speaker system that is run by windows media player. I set up a scheduled task to all files that will play, but once the said file is played WMP does not close automatically. This does not seem like a problem, but if nobody closes on WMP, the next scheduled task will not - play which completely defeated the purpose to automate the process and our workers will have to still remember to close WMP 3 or 4 times a day, otherwise nobody gets the announcement.

    I have tried implementing a command line with /play wmplayer start/close c:myfile.wav as an executable file and run it with the Task Scheduler instead of the wav file... it did not work. Namely, the /close function was abandoned with WMP.

    Is it possible that I can continue to use WMP and completely automate this process without the manual close WMP after each scheduled task?

    Hi Rodvold,

    The issue of Windows XP, you have posted is related to Windows XP in a domain environment. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet forums.

    To change the scheduled tasks in Windows XP, you can also check this link:

    How to modify the scheduled tasks in Windows XP

    Hope the helps of information.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Media Center Scheduler service is not running, even when the value of autostart

    I had some trouble recently getting Windows Media Center to record programs. I did some research and found that Windows Media Center (ehSched) Scheduler Service does not start when I start my computer.
    It IS configured to start automatically.
    When I found that the service has not been started, I have manually started, but would find it himself quit again a few minutes later.
    It of very frustrating and resulted in missing the scheduled recordings.
    The only way to save that program is open the WMC and actually watching the program for the duration of the scheduled recording. (Not good if I'm not home!)

    I am running Windows 7 32 bit SP1 on a laptop of Toshiba Satellite A500.

    Help, please!

    Hi the Flomsat,

    I would say looking at the following thread because it's a question similar to yours:

    I tried all the solutions on this thread. None was able to solve my problem.

    However, I found a fix that MAY have worked (it's only 1 day but so far it looks promising).

    Open Windows Media Center,

    Click on settings-> General-> optimization-> uncheck to "perform an optimization. I never noticed an increase in performance and reliability with it turns out, in fact, now that I think about it, when I turned it on, my Scheduler service started having these problems. It must be able to close the Scheduler to 'optimize '...

    UPDATE *.
    It did NOT work

    I had to reinstall windows to get it working again :(

  • B210a Photosmart: Inks works do not on HP Photosmart B210 may apply to any other SOLUTION POSSIBLE

    Like many I had a headache in my case with the black ink doesn't work does not, all about he makes message boards, nothing helped, still no black - arrived to the conclusion No matter how hard I cleaned the print head, that color would come out.  Finally, I got all inks to work, and I'll explain as follows:

    As I said I did a full clean truck, but just in case, I ordered a refurbished on the NET, cost me £20 inc postage, but it was planned for 12 months, so more or less NEW.

    Then first remove the old Printhead and clean (although I replaced mine with a renovated as above), on the printer where you took the print head on, there is a plate of white color with metal connectors on this point

    At this point good idea to pull the plug on the back of the printer, transportation center remained on mine not moving not

    I put a little alcohol to burn on a tissue paper and brush contacts - NOT WET, damp and dry

    In the meantime if you have the time to thoroughly clean every bit of the print head several times so that the water runs clear - by all means follow the steps already mentioned in the comments, as said that I replaced it

    Using alcohol to burn again gently clean all metal connectors and dry - contacts on the head and the machine are now 100% clean, I hope that if you've been careful enough

    replace printhead (adopted) but without the inks and keep down the lever arm on the printer, then add the inks and ensure that they adapt to the House with a click

    close the lid, now reconnect the wire on the printer and let the machine warm up

    Once he settled, try printing a color image say about size A5 or A6, so not to exhaust all other inks

    You may have healed now, otherwise the chances are that you are missing a color or a black - no problem

    With the machine, disconnect the power supply again back and wait more than 30 seconds to reset

    Put power cord back in, let the machine warm up - will likely be asked to do an alignment, click NO,

    Print to try again in A5 or A6 (black Inc. photo all in) again may have worked, if not

    go to the TOOLS menu on the touch screen (or on some models computer screen) and click on CLEAN PRINT head

    Wait so that it can process the cleaning and try again to print an image - MINE WORKS PERFECTLY at this POINT a and the images were as good as they have ever been.

    (OTHERWISE, you will have to redo some CLEAN print head)

    It worked for me, very happy with the machine, and I'm not saying what I did.  For those who have a go, be careful electrical contacts, etc. and everything is completely dry before the arrival of the machine.

    Hope this helps.

    Thanks for sharing!

  • 2 strip Lumetri Preset doesn't work is not in 2015.3

    Someone else can check if preset of Lumetri ' 2 band"works or not? It seems to work only with a LUT of selected entry. If he works in a project very well before the update.

    I'm sure that I could use before the update without a LUT entry also.

    Thank you

    Action plan

    Annibale Hello,

    Bump. Any news on that? I need to use the filter in the coming months...

    The preset you are referring to is probably not in the list of presets. This seems to be a bug. It probably should be eliminated for the current version. I'll try to find out what happened.

    The reason is that some predefined settings are deleted in first Pro CC 2015.3 (10.3) they caused problems with some images. You can use previous versions of Premiere Pro for these presets. I'm sorry.

    Thank you

    Kevin

  • Import database without job scheduler.

    Hello!

    Oracle 10g

    The database was implemented entirely with tasks planned with intervals of 2 sec.
    How to import a database without a job scheduler?

    The thing is that I import the database and can't be allowed to run scheduled tasks.
    Can I somehow omit Planner job when importing database?

    Greetings

    After that to make sure that the scheduled tasks via Scheduler and scheduled using dbms_job jobs are all disabled.

    SQL> exec dbms_scheduler.set_scheduler_attribute('SCHEDULER_DISABLED','TRUE');
    SQL> alter system set job_queue_processes=0;
    
  • JJUJ of printing works is not for Iphone 5 s

    I have 5 16GB iPhone after upgrading to IOS 10 to present JJUJ of printing works do not, now I have IOS 10.0.2 still not workng I need ide solution.

    Hello

    Go to settings touch id remove fingerprint and then add impressions back again.

    See you soon

    Brian

  • Searching for pictures of iOS 10 works is not as expected

    I have updated to a couple of my iOS devices (iPhone 6 and iPad Air) iOS 10, actually 10.1 public beta 1 now, but find the results obtained in the search of my library of ~ 5000 photos and videos quite modest.

    I very rarely get the images I'm looking for, if any.

    For example, 'find my photos from the Netherlands' Returns none so I have 122 in my library.

    The research of the city of Delft (that is the Netherlands) returns a single result, which, ironically, shows a screen indicating the word "Delft" on a local train.

    I wonder if there is the possibility of re-indexing of the library or the device can be done on a Macintosh, but I'm afraid user ios do not have such a luxury for now.

    In my troubleshooting process I spent from Italian to English, since this might be a reason for poor search results. But things have not changed.

    Of course, if I ask "Find my photos of the mountains" (or dogs by the way) I get decent results this image recognition works though, not much luck with geotags.

    Any idea?

    / P

    Wow!

    The answer to this question of mine has been overwhelming... (I'm kidding)

    In the meantime, FYI Apple has released the iOS 10.0.2 update that solves the problem of geotags.

    I can now find my photos from the low countries (or Switzerland or India also) and get the correct results.

    Nice

    / P

  • with firefox 43 yahoo and yahoo mail doesn't work does not correctly

    With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

    I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

    Thanks for the help!

Maybe you are looking for