Join between tables of rates and service agreements

Hello

I am looking at the table of the Service contract in the observer Application and cannot figure out how the rate is referenced in this table. It doesn't seem as any reference to the table of hourly rates in the Service Agreement?

TIA,

Edward :-)

You can find the fee structure used for a Service contract on the following table: CI_SA_RS_HIST

Tags: Oracle

Similar Questions

  • Variable space between tables of body and footer.

    Hello world

    I have an order report that contains a table into the header, another table of body and the table in the footer. For the header/footer, I created templates and call using call: header and footer: call.

    When the order has about 100 lines, it is printing in 10 pages. and on each page, I see a variable gap between tables in body and footer. some times, the two are overlapping. How can I avoid this? I can send files if wants that whole body.

    I sent you the modified model. Please take a look.

    Thank you!

  • Overactive bladder - difference between the standard rate and variable rate

    What is the difference between the standard rate and variable rate

    Yes, there is. It displays only all the combinations that are already defined elsewhere. ex: in the type of program, plan form

  • Join between tables header & detail based on the age and group

    To find the amount of the age and the group in the table of detail based on age & group_id in header?

    Example: Take the seq_id = 1 mind, it has age = 60 & group_id = 23 (23 months).

    In the detail table xx_detail, the age column represents the age of the person (0-65 represents the age 0-65 and so on).

    If the age is null, while the rank indicates the Group (0-12 represents the group between 0-12 months). If the age is not null, then the Group 1, group 2, group 3 that data amounts.

    So now I must get the amount as 240 (like my seq_id header = 1, age = 60, group_id = 23, as it is covered by group age & 13-59 0-65). So I need a SQL to find the exact amount in detail based on the header record. We must go to settings & group_id age and get an amount of detail tables. Can anyone provide input how to achieve this in the most simple.

    1. SQL > select * from v$ version
    2. 2.
    3. BANNER
    4. --------------------------------------------------------------------------------
    5. Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
    6. PL/SQL Release 11.2.0.3.0 - Production
    7. CORE Production 11.2.0.3.0
    8. AMT for Linux: Version 11.2.0.3.0 - Production
    9. NLSRTL Version 11.2.0.3.0 - Production
    10. SQL > xx_header desc ;
    11. Name Null?    Type                                     
    12. ----------------------------------------- -------- ----------------------------
    13. SEQ_ID VARCHAR2 (6)
    14. AGE                                                NUMBER
    15. START_DATE                                         DATE
    16. GROUP_ID NUMBER
    17. SQL > select * from xx_header;
    18. SEQ_ID AGE START_DATE GROUP_ID
    19. ---------------- ------ ------------------        ---------------
    20. 1 60 1 JANUARY 12 23
    21. 2 89 1 JANUARY 12 23
    22. 3 95 1 JANUARY 12 23
    23. SQL > xx_detail desc ;
    24. Name Null                                      
    ?    Type
  • ----------------------------------------- -------- ----------------------------
  • SEQ_ID VARCHAR2 (10)
  • AGE                                                   VARCHAR2(10)
  • GROUP1 VARCHAR2 (10)
  • GROUP2 VARCHAR2 (10)
  • GROUP 3 VARCHAR2 (10)
  • SQL > select * from xx_detail;
  • SEQ_ID AGE GROUP1 GROUP2 GROUP3
  • ---------- ----------           ----------            ----------     ----------
  • 1                                0-12              13-59       60-126
  • 1           0-65               120                 240         300
  • 1 66 - 135 100 80 400

    • Hello

    Is this the same question you asked 3 days ago

    https://forums.Oracle.com/thread/2606197

    ?

    Whether it is or not, validate the information requested in this message, which is also in the FAQS of the Forum:

    https://forums.Oracle.com/message/9362002

    If it's the same question, do not post a new thread.  Mark it as "Answered" immediately and continue in the original thread.

  • License and services agreement

    I'm about to buy the creative student membership for the school cloud. Can I use my design as profit since it is a student discount?

    Yes.

  • join of tables inside the trigger

    I will set the value of a column in a trigger based on one join between other: new value and a table, but it does not work. Cannot select on one: new.column inside the trigger? If not, then all the ideas on how to do this simple thing? I may need to call a function with the: new.column value but don't know if I'm having the same problem. sillySql. Thank you.

    create the table codetab
    (ct_id number (6))
    ct_value varchar2 (6));

    create the table bustab
    (bt_id, number (6))
    bct_id number (6).
    bt_value varchar2 (6));

    insert into codetab values
    (1, 'AAA');
    insert into codetab values
    (2, 'BBB');

    create or replace trigger bustrig
    Before Insert on bustab for each line
    Begin
    Select codetab.ct_value in: new.bt_value
    of codetab, bustab
    where: new.bct_id = codetab.ct_id;
    end;
    /

    insert into bustab values
    (1, 1, null);

    insert into bustab values
    *
    ERROR on line 1:
    ORA-01403: no data found
    ORA-06512: at "ELLEPEUTNEANMOINS. BUSTRIG', line 2
    ORA-04088: error during execution of trigger ' ELLEPEUTNEANMOINS. BUSTRIG'

    Hello

    The problem isn't with the: NEW values, it is with the table.
    A FOR EACH ROW trigger on bustab can't question bustab.
    However, you don't need to ask bustab. Codeteb is the only table you must ask:

    create or replace trigger bustrig
before insert on bustab for each row
Begin
    select  ct_value
    into    :new.bt_value
    from    codetab
    where   :new.bct_id = ct_id;
end;

  • several "logical joins" between a fact table and a dimension table

    It seems that cannot create multiple "logical joins" between a fact table and the table of a dimension in OBIEE with Administration Oracle BI tool. For example, whereas a business model with a dimension table TIMES and has made the table containing the value of START_TIME and END_TIME, we want to create separate logical joins BOTH done for the START_TIMEs and the END_TIMEs? Of course, underlying foreign keys can be created, but as far as I can tell the Administration Oracle BI tool does not support this. The solution would be to reproduce the table in TIME, but it's ugly.
    I'm looking for another approach.

    Try this. Create an alias of two for the TIME dimension (beginning & end) in the physical layer, then remove foreign key to the 'Parent' time dimension. Create the foreign key in the physical layer for new aliases, then create complex joins in the MDB layer for new aliases as well. This will allow you to present the two dates within the same table in the presentation layer. Not a more elegant solution, but it works.

  • Join between PAY_GRADE_RULES_F and BEN_CWB_PERSON_RATES

    Hi Experts,
    I'm working on the module of work remuneration and creating custom ETL based on some sources eBS bench.
    Can anyone let me know the joins between the tables: PAY_GRADE_RULES_F and BEN_CWB_PERSON_RATES?

    Thank you
    Anamika

    Hi med.

    I would start here; http://ETRM.Oracle.com

    Good luck

    Daan Bakboord
    http://obibb.WordPress.com

  • Update statement with joins of tables and where Clause

    Hi, I have MS SQL background and I try to execute an update statement in Oracle with joins of tables. However, the syntax below does not work but I think it works for MS SQL.

    Basically, the base table must be attached to a master table trend with monthly snapshots, an account will be only an entry for a given date monthly. Where clause must be limited to accounts within a certain range of interest rates.

    The first approach returns command SQL ORA-00933 not correctly completed, and the second approach returns ORA-01427 row below query returns multiple rows. Can anyone help? Thanks in advance!



    1:

    Update PenaltyAll
    Set a.indicator = month (b.)
    of PenaltyAll an inner join Master b on a.acctno = b.accountnumber
    where a.monthend='01/31/2009' and b.date='12/31/2008' and b.apr < 20

    2:

    Update PenaltyAll
    adjustment indicator =
    (select to_char (b., 'MM')
    of PenaltyAll an inner join Master b on a.acctno = b.accountnumber
    "where to_char (a.monthend,'mm/dd/yyyy ') = 31 January 2009"
    (et to_char(b.date,'mm/dd/yyyy') = December 31, 2008 "
    and b.apr < 20)

    Published by: sqlrookie on August 21, 2009 07:04

    I edited my post, that was my mistake, ANC you try now?

  • I'm reading the data (speed rate and flow) of a table and it plot in a graph.

    I'm reading the data (speed rate and flow) of a table and it plot in a graph. I need to draw two values of l/min (speed) to the same speed. How can I do using a loop for?

    There is no need actually to use a loop FOR this. And using a graphic waveform isn't the type of field for this, for a waveform you a (Start), the dT T0 (greatness not) and table D (Data), this isn't what you want unless you know precisely the measure will take place according to an orderly disposal, you'd want a xy chart so that you can trace the measures where they occur in the axes X and Y of preference.

  • Relationship between the samples through the second rate and sampling

    I was wondering if someone could clarify the relationship between the samples through second rate and sampling.

    I have USB6008 and USB6363 of the tips that I work with in Measurement Studio.

    For the nec USB6008 entry differential (up to four channels of HAVE), if I put a sampling frequency to 8192 samples per second, and I updated 2048 samples per channel with:

    Task.Timing.ConfigureSampleClock ("", 8192, SampleClockActiveEdge.Rising, SampleQuantityMode.ContinuousSamples, 2048)

    Am I right in assuming that:

    • through the 4 analog inputs 8192 samples will be collected every second
    • 2048 samples will be taken by way of analog input for each scan
    • The time between two successive data points is 1/2048 seconds (about 0.5 ms)

    Hi DKIMZEY,

    The help page for the "Timing.ConfigureSampleClock method" should have a hypertext link to the page "Sample clock" in NOR-DAQmx help, that contains this text: "this sample clock sets the interval of time between samples. Each tick of the clock starts the acquisition or the generation of one sample per channel. "When the sample clock frequency is 8192, then the time between two successive data for a single channel is 1/8192 seconds. The time between the data points on two adjacent channels is controlled by the clock to convert, which can be controlled independently on most devices (up to a point).

    Brad

  • What is different between windows xp Service Pack 1, Service Pack 2 and Service Pack 3

    Gentlemen met,

    What are different between windows xp Service Pack 1, Service Pack 2 and Service Pack 3?

    Thank you
    Kind regards
    Patrice Hiren

    Those are the service packs were introduced over time to fix bugs and add highlight. Note that support for XP with SP3 ends in April 2014. If you do not have SP3 installed, the support is already over.

  • How to join two tables if you transpose the rows, columns and rows in one of the table

    Hi guys,.

    can someone help me please in the write request

    I have two tables

    Agents and Agent phones but in the agent phones table for the id of an agent it displays 4 rows because one of the column there types of different phones (office, mobile, home, fax)

    So instead of display 4 rows, I used max(case...) to convert rows to columns

    now how to reach it with another table

    Requirement:

    Database: 11.2.0.2.0

    create the table AGENT_PHONE

    (

    agent_id NUMBER (20) not null,

    agent_type_code VARCHAR2 (10) not null,

    agent_type_prefix VARCHAR2 (10) not null,

    Phone_Number VARCHAR2 (16) not null,

    phone_type_code VARCHAR2 (10) not null

    )

    CREATE TABLEAGENTS

    (

    agent_id NUMBER (20) not null,

    agent_type_code VARCHAR2 (10) not null,

    agent_type_prefix VARCHAR2 (10) not null,

    NAME VARCHAR2 (40) NOT NULL

    )

    INSERT INTO AGENT_PHONE(AGENT_ID,AGENT_TYPE_CODE,AGENT_TYPE_PREFIX,PHONE_NUMBER,PHONE_TYPE_CODE)

    VALUES (29709, ARE ', 'OFFICE', '4805551436', 'CELL');

    INSERT INTO AGENT_PHONE(AGENT_ID,AGENT_TYPE_CODE,AGENT_TYPE_PREFIX,PHONE_NUMBER,PHONE_TYPE_CODE)

    VALUES (29709, ARE ', 'OFFICE', '1111111111', 'PHONE');

    INSERT INTO AGENT_PHONE(AGENT_ID,AGENT_TYPE_CODE,AGENT_TYPE_PREFIX,PHONE_NUMBER,PHONE_TYPE_CODE)

    VALUES (29709, ARE ', 'OFFICE', '2223334444',' OFF');

    INSERT INTO AGENT_PHONE(AGENT_ID,AGENT_TYPE_CODE,AGENT_TYPE_PREFIX,PHONE_NUMBER,PHONE_TYPE_CODE)

    VALUES (29709, ARE ', 'OFFICE', '5556667788', 'FAX');

    INSERT INTO VALUES AGENTS

    (29709, ARE ', 'OFFICE', 'FLY');

    INSERT INTO VALUES AGENTS

    (1234, ARE ', 'OFFICE', 'MIKE');

    SELECT * FROM AGENT_PHONES

    AGENT_IDAGENT_TYPE_CODEAGENT_TYPE_PREFIXPHONE_NUMBERPHONE_TYPE_CODE

    ---------------------------------------------------------------------------------------------

    29709REOFFICE4805551436CELL
    29709REOFFICE1111111111PHONE
    29709REOFFICE2223334444OFF
    29709REOFFICE5556667788

    FAX

    SELECT * AGENTS

    AGENT_IDAGENT_TYPE_CODEAGENT_TYPE_PREFIX

    NAME

    29709REOFFICEROB
    1234REOFFICE

    MIKE

    This is so the data we have in both table

    Now, I transposed rows to columns in the table of agent phones so I used the following query

    SELECT AP. AGENT_ID,. AGENT_TYPE_CODE,. AGENT_TYPE_PREFIX.

    MAX (CASE WHEN AP. PHONE_TYPE_CODE = 'CELL' THEN AP. PHONE_NUMBER END) AS CELL.

    MAX (CASE WHEN AP. PHONE_TYPE_CODE = 'OFF' THEN AP PHONE_NUMBER END) AS TURNED OFF.

    MAX (CASE WHEN AP. PHONE_TYPE_CODE = 'FAX' THEN AP. PHONE_NUMBER END) LIKE FAX,.

    MAX (CASE WHEN PHONE_TYPE_CODE = 'PHONE'. THEN AP PHONE_NUMBER END) AS PHONE

    AGENT_PHONE AP

    WHERE AP. AGENT_ID = 29709

    GROUP OF AP. AGENT_ID, AP. AGENT_TYPE_CODE, AP. AGENT_TYPE_PREFIX.

    AGENT_IDAGENT_TYPE_CODEAGENT_TYPE_PREFIXCELLOFFFAXPHONE
    129709REOFFICE4805551436222333444455566677881111111111

    My question is how this to join the agents table so that my output should be like this...

    I want to display all the results in the table of the Agent, even if they are not in the table of agent phones. As you can see there are other agent id 1234 is also populated

    AGENT_IDAGENT_TYPE_CODEAGENT_TYPE_PREFIXNAMEAGENT_IDAGENT_TYPE_CODEAGENT_TYPE_PREFIXCELLPHONEOFFFAX

    --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    29709REOFFICEROB29709REOFFICE4805551436111111111122233344445556667788
    1234REOFFICEMIKE

    Currently, I run this query and I get the output as below

    SELECT *.

    AGENTS HAS

    LEFT OUTER JOIN AGENT_PHONE AP

    ON A.AGENT_ID = AP. AGENT_ID

    AND A.AGENT_TYPE_CODE = AGENT_TYPE_CODE.

    AND A.AGENT_TYPE_PREFIX = AGENT_TYPE_PREFIX.

    AGENT_IDAGENT_TYPE_CODEAGENT_TYPE_PREFIXNAMEAGENT_IDAGENT_TYPE_CODEAGENT_TYPE_PREFIXPHONE_NUMBERPHONE_TYPE_CODE
    129709REOFFICEROB29709REOFFICE4805551436CELL
    229709REOFFICEROB29709REOFFICE1111111111PHONE
    329709REOFFICEROB29709REOFFICE2223334444OFF
    429709REOFFICEROB29709REOFFICE5556667788FAX
    51234REOFFICEMIKE

    I want id 29709 agent in a line with 1234 agent also id to display

    You can rotate your phone number of agent in columns

    Select *.

    of AGENT_PHONE

    pivot)

    min (PHONE_NUMBER)

    for PHONE_TYPE_CODE in ('CELL' as a 'CELL', 'PHONE' like 'PHONE', 'OFF' in the 'OFF', 'FAX' as 'FAX')

    )

    AGENT_ID AGENT_TYPE_CODE AGENT_TYPE_PREFIX CELL PHONE OFF FAX
    29709 RE OFFICE 4805551436 1111111111 2223334444 5556667788

    Then you can join to view inline or CTE

    with AGENT_PHONE_PIVOT like)

    Select *.

    of AGENT_PHONE

    pivot)

    min (PHONE_NUMBER)

    for PHONE_TYPE_CODE in ('CELL' as a 'CELL', 'PHONE' like 'PHONE', 'OFF' in the 'OFF', 'FAX' as 'FAX')

    )

    )

    SELECT *.

    AGENTS HAS

    LEFT OUTER JOIN AGENT_PHONE_PIVOT AP

    ON A.AGENT_ID = AP. AGENT_ID

    AND A.AGENT_TYPE_CODE = AGENT_TYPE_CODE.

    AND A.AGENT_TYPE_PREFIX = AGENT_TYPE_PREFIX.

    AGENT_ID AGENT_TYPE_CODE AGENT_TYPE_PREFIX NAME AGENT_ID AGENT_TYPE_CODE AGENT_TYPE_PREFIX CELL PHONE OFF FAX
    29709 RE OFFICE ROB 29709 RE OFFICE 4805551436 1111111111 2223334444 5556667788
    1234 RE OFFICE MIKE - - - - - - -

    Is that what you're looking for?

  • How to join two tables to retrieve the data from the columns in table two. Tables have primary and foreign key relationships

    Hello

    I want to join the two tables to retrieve the data from the columns of the two table passing parameters to the join query. Tables have primary and foreign key relationships

    Details of the table

    Alert-1 - AlertCode (FK), AlerID (PK)

    2 AlertCode-AlertDefinition-(PK)

    Help, please


    ----------

    Hi Vincent,.

    I think that you have not worked on adf 12.1.3.  In adf 12.1.3 you don't have to explicitly create the association. When you create the EO to your table, Association xxxxFkAssoc, will be created by ADF12.1.3 for you automatically. Please try this and do not answer anything... You can also follow the links below. I solved the problem by using the following link

    Oracle ADF Guide step by step - Oracle ADF tutorial: creating a relationship of the master / detail using Oracle ADF

    ---

  • What is the difference between task and Service?

    What is the difference between task and Service? When we use the task and that we should use the Service? Thank you ~ ~

    See the StackOverflow question:

    Task vs. Service

    You may also interest somewhat related:

    Difference between javafx.concurrent and Platform.runLater

Maybe you are looking for