DLNA without IPv6

Similar Questions

• Series Toshiba 40RL933G - no subtitles on DLNA without transcoding

  Hi guys,.
  I have 2 40rl933g TV. I used USB to play any good movies.
  I install me a DLNA server, put all the parameters needed, but failed to play subtitles via DLNA without transcoding.

  All advice if it is possible to play the media + subtitles via DLNA without having need of transcoding (and use high CPU :))

  See you soon
  Yasen

  Hello

  Operating instructions (page 53), you can find this note:

  + To select the subtitle and audio language (* USB ONLY *) press subtitle to select you preferred language subtitles. +

  + Note: this function is not available depending on the content. +

  In my opinion, this means that subtitles are available only to play movies from USB device and it also depends on the content you are playing

• Homegroup Windows 7 there is no homegroup on the network - various solutions already tempted

  Client computers running Windows 7, both can create a homegroup, but can't join a homegroup that was not created by itself.  It is connected to the router, the other using the wifi.  Network discovery is on, ipv6 is enabled in the settings of the card (although no connectivity does record - I read that the residential groups cannot be created without ipv6, but I can create them so I think that this is not a problem), having run homegroup troubleshooter on two computers without result.  One thing that bothers me, is that the troubleshooting says my time is not synchronized with my local standard time, but it is.  I tried to leave or remove the homegroup several times.  I disabled the firewall and the computers can't see each other on the network, only a question mark with the legend "unknown".  The required services are running.

  It's really quite ridiculous and I'm at my wit's end.  Someone has AN idea of what could be the problem?

  Hello

  Programs require resources that go beyond a single file that can be run by the network, so access to the hollow of the network program is not a very functional thing. Unless these are specific programs that have been designed for this purpose.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How can I enable ipv6, without having to pay for it

  When I click to enable ipv6, another screen opens,

  who wants to pay for this service

  Hello

  What are you clicking on who wants to load? Why do you need to activate IPv6? Is a site you want to charge
  you if access you it via IPv6?

  1 your network device and the driver must support IPv6 in order to check with the system manufacturer (manufacturer of motherboard
  for custom systems) or the actual peripheral manufacturer.

  Enable and disable IPv6 if the hardware and drivers support a automatic FixIt.

  How to disable certain Internet Protocol version 6 (IPv6) components in Windows Vista, Windows 7, and
  Windows Server 2008
  http://support.Microsoft.com/kb/929852/en-us

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• IPv6 without internet conectivety

  I have no internet conectivity to IPv6, but I have internet conectivity to IPv4, thank you.

  You ISP supports IPv6?

  Some does not yet support it.

  It has never worked?

• Access Internet without IPv4 but Ipv6 connectivity is OK

  I bought a laptop with IE10 a Windows 8 installed. When I try to log into WiFi, Ipv4 access does not work but the Ipv6 access works.

  I can navigate only in a few pages.

  Hi Francisco,.
  Thanks for posting the question on Microsoft Community Forums.
  As we hear of publication description, Ipv4 does not work when connecting by Wifi.
  We will try to help you solve the problem.
   
  If you could answer a few questions that would help us resolve this problem:
  1. do you get an error message?
  2. you are on a domain network?
   
  Here are some steps that you can follow:
   
  Step 1: Clear the cache of DNS resolution.
  (a) move the mouse to the lower left corner of the screen and right click on the Start and selection
  "Command Prompt (Admin).
  (b) type ipconfig/flushdns, and then press ENTER.
   
  Step 2: Manually configure TCP/IP settings
  Follow the steps to reset TCP/IP.
  one) starts at the desktop view.

  (b) open the command prompt, right-click in the corner when the start window appears, select command prompt (admin).

  (c) at the command prompt, copy and paste (or type) the following command and then press ENTER:
  netsh int ip reset c:\resetlog.txt
  Note: If you do not specify a path of the directory for the log file, use the following command:
  netsh int ip reset resetlog.txt

  (d) restart the computer.

   

  You can read this article on the problems of network connection for assistance.
  http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-a-network

   

  Hope this solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.

   

  
   

• my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• IPv6 and IPV4 aid

  Hello everyone,

  I use a MacBook Pro 15 of retina in 2013. My ISP provides IPV6 connectivity yet, so I created a help service of Hurricane Electric IPV6 tunnel. I created a raspberry Pi to give IPV6 addresses on my subnet and everything works as expected. I have IPV6 connectivity on my MacBook and I can browse IPV6 sites. I did a test on http://ipv6-test.com . The results are positive, but he said that my browser (latest version of Google Chrome, but the problem is too much on Safari and Firefox) is not compatibility help. If I try the test again on Windows, Android, ecc. the warning message disappears.

  The problem is that I can't browse websites using my MacBook. For example, the Apple site has not been appearing: I ran wireshark and Chrome was trying to load everything using IPV6, without success. Also try to access https://eolo.it/ (my ISP site) generates errors: it does not always work on my MacBook, while open it under Windows and IPV6 has no problem at all. I think that my MacBook (or in general OSX El Capitan) is not able to fall back to iPV4 when site an IPV6, but it does not work. I've read about 'Happy eyeballs' and I would like to know how to solve my problem.

  I know that I could move to IPV6, but I prefer it to be, and in, I would like to be able to use iPV6 when my ISP provide me with an IPV6 address.

  Thanks in advance.

  I don't remember, in Sys Prefs > network > advanced, is there still a way to put automatic IPv6?

• Message violates guidelines send IPv6 on PTR 550 5.7.1 documents and authentication

  I use OS X Server (El Capitan) as my personal mail server. Everything is set up correctly. Mail works fine for everything except google gmail. This has happened for 2-3 years... whenever I have send emails to users of Gmail, I get "reviewed mail returned to sender" which explains "this message does not respect guidelines send IPv6 on PTR 550 5.7.1 records and authentication»

  How can this be repaired?

  I resolved to myself.

  After digging the question (there is a post in the communities of Apple Support by Paul Derby 'Blocks Google's IPv6 email receipt sent by OS X Server'), I found the hack to force postfix to use IPv4 only not for work.

  Instead of this, I found myself setting the configure IPv6 in the 'link-local only' in the advanced configuration of network Ethernet. (She had been established to 'Automatically', perhaps by default, when update OS X - Server some time ago.)

  I can now send to addresses gmail from my client devices without problem. However, it seems that the accessibility of the Internet is not working now and so I disabled it (a small price to pay).

• Toshiba TL 938G - application remote dlna and toshiba problem

  I try to use the remote control feature and toshiba dlna app, but I can't when the TV is connected to the network via wifi.

  If I connect wired lan and pc or androind tv phone WiFi then everything is ok.
  I have tryied three different routers, but if all devices are connected wireless is not possible.

  I can use the dlna via wifi from my phone to the pc.

  The problem is with toshiba tl938g.
  The tv connects via wifi takes ip address normally and I use toshiba places without problem.

  I assume you mean on Intel WiDi because I found your other son on the Intel WiDi.

  You can use only one WLan connection at the same time.
  As far as I know that if you are already connected to the network using the wireless network card, you can not use WiFi to connect the mobile phone.

  So if you want to connect via Intel WiDi TV mobile phones you have to unplug the TV from the router.

• Toshiba 40TL933 - no subtitles watch movies via DLNA Server

  Hello

  I'm trying to run a video file with a subtitle (srt) file that has the same name as the video through a dlna for my Toshiba 40TL933 server and I see the video but without the subtitles,
  I tried the serviio of dlna and mezzmo server and I have the same negative results

  Can someone help me?

  Thank you

  Hello

  It seems that subtitles are not supported for streaming files via the LAN

• Toshiba 42VL863 and DLNA - disconnect after 30 minutes

  I have the television on the cable network with shielded cable category 7, gigabit lan on a switch, such as media servers, I have a Qnap TS-509 with DLNA, all connected devices (tablets, PC and other devices) reproduce the video stream without problem.

  The TV instead: after 30 minutes of reading device tells me disconnected.
  I tried everything, but I can't see a whole movie.
  I demand an answer from toshiba. The money that I gave for this TV were not false, but good.

  I use DLNA with my Toshiba TV but you can check at all first if maybe some firmware update is available for your model of TV.

• Airport Extreme and Cox Internet IPv6 problem

  This is one notification to others as well as a question:

  I have Cox Cable high speed Internet in several places using an Airport Extreme 3 GB connected as a router to the modem cable Cox.

  For more than a week, we would find regularly in the morning that the outside connection to internet DNS servers were lost.  We called Cox several times and they have done the usual reset of the router and the modem and things seem to work for some time.  But the next day again.

  They came out and replaced the connections, I I had to buy a new cable modem and I replaced a digital switch.  Every time things seem to work for some time.

  I thought to replace the Airport Extreme (I read others did in a similar situation without result).

  After much frustration, I started looking for Airport Extreme and DNS and found similar stories.

  After that several unproductive calls with Cox Internet of first level support, I finally reached a level which acknowledged that Cox was the IPv6 deployment and he was having a problem with Airport Extreme routers.  They said Apple was working on it and gave me a number to call for support from router from apple.  Unfortunately the number they gave was no longer valid.

  I persisted and finally got the Apple support and indeed they knew the problem and said Cox was working on that... But there was a temporary problem - and that was to disable iPv6 on the airport extreme (more precisely (internet > Internet Options > configure Ipv6: link-Local only).)

  For now it seems to have stopped the decline during the night which seems to happen between 12:00 and 02:00.  By experience, I do not think that its really a problem of compaibility IPV6, but how the router meets some kind of rebate to zero/test signal signal service is done in early morning.

  So the question is - does anyone know with certainty what happens or who really works on this.  From my point of view, both sides think it's the other problem.  BTW - I've read about other people with Non Apple routers running after something similar.

  GABarber,

  I also had a similar problem.  Prior service of Cox Communications in Phoenix AZ has been rescinded and recently restored (March 1) yesterday afternoon.  After the departure of the technician, the wi - fi failed to produce a valid connection, citing DNS error and no response from the server.  We have a new modem, CISCO, at an Air Port/Time Capsule 2 TB ethernet cable.

  After talking with support for level 2 level 1 and then Cox, there was sufficient evidence for a correct signal via the modem, but the Port of the Air was not picking up or he issued (by Cox).  Check my Air Port Utility apps on iMac and iPhone shows a signal Internet or Air Port casual, but never the two together.  The modem and the Air Port so would show appropriate green led lights up, but in vain to work wi - fi.

  The only thing that has worked so far is your solution listed above: Air Port utility > Internet > Internet Options > configure Ipv6: link-Local only.

  Thank you, GABarber.

• DLNA - 'no file playable found ".

  My BDP-S570 can see my DLNA server and browse the directory structure. However, he pointed out each directory as "no playable file found".

  I have a mixture of .mkv, .mp4, .mpg and .vob files. The player sees any of them.

  I had a similar problem on a player of Blu - Ray BDP-S570. I have a Western Digital external hard drive with a Twonky media server. The BDP-S570 would find the music repertoire, but gave error "no playable files found" when you try to play music. Interestingly, I just bought a Blu - Ray BDP - S580 player and it plays music on the WD external drive very well.

  You're getting hammered by both ends.

  Twonky V5.19 is choice of WD in the DLNA server software. It is broken.

  You can upgrade to a working version by installing in the Twonky-5 directory, I'm running worm 6.0.37 and it is stable and rendering works well enough to make the functional WD NAS.

  If you are not comfortable with Linux, do not attempt this without a step by step cheat sheet. WD's support forum has some. Remember that whenever you make a updated firmware for the WD NAS, you need to reinstall a functional version of Twonky. You will also need to pay for a registration of Twonky key after 30 days use.

  I'm streaming movies mpg, mov movies and mp3 audio without problem. I was not brave enough to depart from this combination. I am currnelty using 2 WD MyBookLive NAS units.

  Good luck; It took me more than a year of the WD does not as announced before I decide to make it compatible with the player Blu - ray Sony 570 and 46HX TV series...

• Media Player DLNA with PlayOn stops at 1 hour 7 minutes - period

  Not sure this is the right forum. I couldn't see a post like this.

  I got this TV from Sony Bravia and Sony Media Player now for over a year.

  Media Player is SMP-N100.

  It works fine, EXCEPT when I use it and PlayOn to play something more than 1 hour and 7 minutes.

  Something shorter is just great. Exactly 1 hour and 7 minutes in a film - it just STOPS!

  Must be "characteristic" software Can you folk fix this?

  PlayOn, by the way, is a DLNA Server works on my PC that gives me access structured for FREE versions of Hulu and CBS, etc. What Sony Media Player has NOT seen fit to include in their approved list.

  I pay for NetFlix, and that shows more long movies, etc., without problem through the device.

  Also, movies or TV shows that I've recorded on the PC - I used Media Center and TV Tuner - also play at any length.

  If you can't fix it, I'm relegating it to the basement and up to Roku!

  Thank you.

  Hi CarlScheider!