Join OBIEE

Similar Questions

• Join OBIEE 11g

  Hello

  I need runs more to joining OBIEE:

  SELECT a.percent, b.dollars, b.year

  FROM table1 a

  INNER JOIN table2 b

  ON a.id = b.id and a.year = b.year

  where a.id = "0001"

  -J' added two Sources of Table logical and connected: a.id = b.id in the physical layer. This join works well.

  - But I also need an another join: a.year = b.year, that's the problem, how to do this, I use a group-featured or complex join? Or any other ideas?

  I solved the problem. I just added two keys in the physical expression of the diagram Builder to tuition assistance: for example: a.id = b.id and a.year = b.year.

  Seems that gives me the right numbers.

  Thanks for help

• documenting physical joins OBIEE

  Hello Forum,

  I was responsible for documenting all the objects of the SPR for a specific project.  Does anyone know how export, copy, query of metadata DB, or otherwise generate a list of all defined at the physical level joins?  It simply * MUST * be a way to do it other than each open physical diagram and copy and paste each join statement...

  This is a significant project and I am hoping to find a way to do what is most effective.

  Thanks in advance!

  Ben

  Check this box

  cool - bi.com

• How to hide a prompt for a user to obiee perticular 11.1.1.5.0

  Hello
  I work in obiee 11.1.1.5.0.I have a prompt that I need to hide it from a particular user. Can someone help me please in this?
  
  In my environment, I joined obiee oam. So all of my users come from OID. I need to hide the prompt for few users OID.
  
  
  Untouchables in waiting for a response.
  Farsatha.p.p faye

  Hello

  Refer to the below link.
  http://obiee10grevisited.blogspot.com/2012/03/using-guided-navigation-for-access-of.html

  Everything you need to create two article for both sets of users. A section with the guests to show users and another section with the guests changed to hide from the user.

  Hope this helped / replied

  Concerning
  Young

• Integration of OBIEE 11.1.1.5 with OAM

  Hello
  I joined OBIEE 11.1.1.5 with OID11g (as part of the integration of the OAM), all users OID translate into obiee. IM able to connect to, in the "analytical", but not able to access reports. Also I am not able to assign groups BI for users of the OID.
  Has anyone done this kind of a scenario facing? Can someone help me please?
  If someone did obiee 11.1.1.5 integration integration with oam 11 g, please provide me with the document that you have followed.
  
  Thanks in advance,
  Faye farsatha.
  
  Published by: 927873 on July 16, 2012 12:11 AM

  Hello

  Please try to access the Web analytics services using 'Analytics-ws' instead of just 'analytical' in the URL like below,

  http://:/analytics-ws/saw.dll? WSDL

  Do a test with link below it may help you...
  http://onlineappsdba.com/index.php/2011/12/05/integrate-OBIEE-11g-with-OAM-11g-for-single-sign-on-in-13-steps/
  http://fusionsecurity.blogspot.com/2012/06/integrating-OBIEE-11g-into-weblogics.html
  http://docs.Oracle.com/CD/E23943_01/bi.1111/e10543/SSO.htm#CEGJBAED

  Thank you
  Deva

• Safety of the unit operation of the OBIEE EBS R12

  Hi all
  
  Previously, I joined OBIEE 10.1.3.4.1 with EBS 11.5.10 and I created 3 blocks of initialization EBS Single Sign on integration, get EBS security context, the responsibility of EBS group and 2 reference static variables ORA_EBS_OLTP_DSN, ORA_EBS_OLTP_USER and finally configured pools connections on the side of repository. I put the execute connect on request to call the function "app_initialize" of the EBS.
  
  Now I am trying to set up integration with EBS R12 and have founded business unit security. To do this, I created an additional initialization block to fill the OU_ORG variable. Is this block extra enough to set the security of operating in R12 unit. As I am being able to connect EBS R12 in the responses, but the session does not appear to be initialized and does not appear the data in reports. I have the metalink document follwoed to define integration for EBS 11.5.10. Is it the same for R12 or all other measures must be made?
  
  THX!
  RK

  R12 is different in terms of security of the org.
  You must call mo_global.init('S') or similar.

  Kind regards
  Gareth
  Blog: http://garethroberts.blogspot.com
  Web: http://www.virtuate.com

• To view the zero in a pivot for two dimensions and a measure view

  How show zero instead of null for the measure, the measure is seen in two-dimensional row and one in a column.
  Thanks in advance

  Hi santhoshbon,

  Are you sure that you get a record with a NULL value or are you just can't get a record at all? There is a great misunderstanding about the lack of data compared to data with a NULL value.

  If you really a NULL value which crosses, then all you have to do is use the IFNULL(MY_MEASURE,0) and you will represent at least a 0 instead of NULL.

  If you have no trace in your fact table for this combination of your dimensions, while you do kind of thing of data densification. Here are a few options:

  (1) query use Nico logical substitute to the densification of the data: http://gerardnico.com/wiki/dat/obiee/logical_sql/obiee_sql_densification
  (2) outerjoin bypass to implement John Minkjan in the report: Outer Join work-around
  (3) implement a real outer join to the RPD: joins OBIEE
  (4) to add missing dimensional data points, use the combine with a similar request.

  My guess is that you do not get a NULL value. I'm guessing that you have data scattered and you will need to use one of the methods above to work around this problem.

  Good luck and if you found this post useful, please reward points!

  Best regards

  -Joe

• Controlling the path of the join in OBIEE

  I have a dimension table that is the "hub" of our physical data model.

  This dimension is joined to 4 different fact tables.

  I have a query/chart from a previous version of project (everything worked very well) referenced only 2 of these fact tables.

  Now that 2 more tables of facts were brought in the image for our next version, the query that worked great now is to join all the tables facts 4 (through the central dimension) even if

  I need still to join the tables of 2 original facts.  I'm not selecting or filtering of all 2 new fact tables or their associated dimensions (except the central dimension - who share all the facts)

  in this query.  Yet, all the facts 4 tables are called.  Not sure why obiee works this way.

  I need to OBIEE do not invoke a join with a fact table, if no facts from the fact table is used in the query.  The join is affecting counties in the output and charges are incorrect.

  Looks like you have mapped them physically.

  Go to the sources of logical sources IE 2nd logical table.

• Join physical OBIEE 11 g condition

  Team

  How to create a physical join complex which has a substr function in OBIEE 11 g RPD.

  Here's the scenario... A custom Dimension table has monthwid (201407,201408..) and the customer number. The fact table has created date (20140712, 20140715...) and the customer number. We need to create a join of physics as

  Dimension table. Customer number = fact table. Table.monthwid number AND Customer Dimension = substr (date of facttable.created, 1, 6).

  When I tried it, get the nqserror generic 27002. Is it more to create a join in the above scenario.

  Thank you very much

  Concerning

  Bottom

  Hi there,

  I just see that the syntax is off. There "substring (... of... of...)" as follows:

  Cast ("01 - Sample App Data (ORCL)" ".." ") "" "BISAMPLE '." " ZZZZ-SRORDERS ".» (GUID' as varchar (10))

  =

  Substring (cast ("01 - Sample App Data (ORCL)" ".." ")) "" "BISAMPLE '." " ZZZZ-SCORDERS ".» ((GUID' as varchar (10)) 0-6)

• Outer join of OBIEE 10 G

  Hi, I'm new to OBIEE 10 G.

  
  

  I have a DimA (dimension), memoirs (fact). I traced the foreign key relationship between DimA and briefs on DimA.A = FactA.A MDB, the relationship is internal and greyed out, so I can't change it to outer join.

  So in the report answers, it only shows data for the inner join of the two tables. What I want is to show all items in DimA and associated items FactA or 0 for those not related.

  I posted a similar question here before https://forums.oracle.com/thread/2596618

  But I can't always change the relationship (still dimmed) even though I opened a deposit in offline mode.

  And what I think is is an option in responses to dynamically control the join (internal or external). For example, sometimes I want to show only paired DimA and FactA, sometimes all the DimA and related FactA or 0, so that I do not change the repository MDB every time if the requirement is changed.

  What is the best practice in this case?

  Thank you.

  Try opening the SPR OFFLINE, or to open in mode online and starting then other CASES it would be gray.

  If you have trouble sending the RPD to sveerava at gm

• Join subquery OBIEE

  Hi all

  I am able to join the 2 reports using "Filter is based on the results of the analysis another" based on e_id and m_timestamp to build the following query report

  Select a.e_id, count (distinct a.m_timestamp) of

  RAW_DATA has)

  SELECT count (*), e_id, m_timestamp of raw_data

  Group of e_id, m_timestamp

  After having count (*) > b 1).

  where a.eq_id = b.e_id and a.m_timestamp = b.m_timestamp

  A.e_id group

  But I want to eliminate the join and generate a report based on this (to improve performance)

  Select b.e_id, count (*) from

  (

  SELECT count (*), e_id, m_timestamp of raw_data

  Group of e_id, m_timestamp

  After having count (*) > b 1).

  B.e_id group

  Which gives the same result but with joins removed - can someone help how to implement this in OBIEE 11 g?

  Try something like

  Select e_id, count (distinct m_timestamp) of

  RAW_DATA

  view count (1) > 1

  E_id group

  If brand aid

  ~ http://cool-bi.com

• Join report external style - OBIEE 10 g

  Hi all
  
  I have a requirement to generate a report for products and sales. I have two dimensions and different elements of fact data.
  Some products may not be sold in a month, but still I want to display in the report with a value of 0. I tried this by creating an outer join left in SPR, since we use another dimension in the de facto calculation (computed column) so also comes to the Group of left outer join and this mess with the results.
  
  If you are looking for the best approach to give the results through answers. Here's the data and expected outcomes
  
  Data
  Product | Month | Sale | The margin of
  --------------------------------------------
  Refrigerator | Can | 100. 20%
  Coolers | Can | 50. 4%
  Laptop computer | Jun | 300. 15%
  
  Now am filtering of the report for the month of may, my results should be similar to
  
  Product | Sale | The margin of
  --------------------------------------------
  Refrigerator | 100. 20%
  Coolers | 50. 4%
  Laptop computer | 0 | 0%
  
  Can anyone provide a solution for this?
  
  Thank you
  Ugser

  A possible solution is based on the fact that OBIEE combines (= reach external) different measures of two fact tables by their common dimensions. What you have to do is:
  Physical layer:
  -create a new dummy facts table in the physical layer (for example by using a view such as Select 1 of the double ;)
  -join all the tables required to the fact dummiy table with a foreign key dimension complex. Make sure that the value is always true, for example 1 = 1.
  MDB:
  -create a new table makes sense given the dummy and join all tables of logical dimension using complex joins. Set levels on the tab content of LTS tie up your other fact.
  Presentation layer:
  -expose the dummy column
  Answers:
  -Slide the dummy in your report. You might want to hide because for a user normal is confusing and meaningless as it will always show 1.
  -Filtering should work correctly now.

  The dummy column will result in OBIEE create a Cartesian join, i.e. all the attributes of the dimension combinations used in the report will be created. The result of the second (in your case sales) will be added. In your example, it will create a record for each month for each product. Sales and margin will only added to combinations of these months and product when there is data in sale.
  I hope this helps.

  See you soon,.
  Peter

• more than one condition of joining 2 tables of obiee

  Hello
  
  I use obiee 11g.
  
  There are 2 tables tableA and tableB where the join condition is (tableA.col1 = tableB.col1) or (tableA.col1 is null and tableB.col1 is null)
  where can I do this type of join.
  I tried to put in the physical layer-> f (x), but in error as only columns CIHI a d opertaors are allowed.
  
  Thank you

  Hello

  Maybe you should go for case function.
  As it indicates that your condition.

  Kind regards
  Lacouture.

• OBIEE - outer joins

  Hello
  
  I have create a join foreign key between the table dimension and in the physical layer. Is it possible to create an outer join on the columns, the option (driving and type) in properties is gray and is by default 'indoor '. How you can activate this option?
  
  Thank you

  Hello

  You create outer joins in the business layer, but the OBIEE outer joins are not like SQL outer join. They can lead to strange errors.

  Its better to do these things in ETL.

  Thank you
  Sandeep

• Joins in OBIEE

  Hello
  
  If we have a table A and B with the common name column and a table stores the name value to upper case and B table stores the values of the names in lowercase. So how we can join these two tables. In physics, we can convert the column with the name in lowercase (B.name) UPPER and join this straight path in the physical layer using foreign key join: B.SID = UPPER (B.Name). Am I wrong?
  
  Thank you
  XYZ

  Yes you are right.
  for example
  I have the emp table and also a table name as emp8
  emp8 as tiny ename.
  the example query will be like this
  Select e8.ename, e.empno in emp e, e8 emp8 where e.ename = upper (e8.ename)