JQuery working on some pages, but not all

Similar Questions

• Why the HDR toning work with some pictures, but not for others?  I have CS6.

  I have Photoshop CS6 and when I go to HDR toning, it is only highlighted for work with some photos, but not others, why?  Thank you.

  HDR toning does not work with CMYK images. Change the RGB color mode, and then you will be able to use HDR toning. It also works with the color to grayscale mode.

• How can I configure Firefox 8.0 to accept 3rd party cookies ONLY from some sites but NOT all other sites?

  I don't like to accumulate 3 cookies and would not simply check accept first-party Cookies 3rd box in preferences. BUT I have to accept 3rd party cookies to use the web page from my Bank, a separate site that manages some of their transactions (such as payment of invoices). This means that I have to accept 3rd party cookies, and then remove them by hand, OR should I check accept whenever I use the website of the Bank and then uncheck the box when I'm done.

  I don't think, but it's easy to do it every time you visit. Simply, you click the CM then stationary on Third Party Cookies and then click temporarily allow all. Then you do the same thing, but use the option to revoke to deny again.

  Note: It is not allow temporarily 'everything' (on each site) uses cookies, it allows only those of this site. But I think that if you let authorized if they are used by another site, they will be able too.

  Jack

• Form validation works on a page, but not the other...

  Hope someone can help with this.

  I have a page below with a load of contact forms that all work well:

  http://www.goodsafariguide.com/judges/judges.php

  I have corrected to re-create (it is true that for the most part by Save under...) same features here:

  http://www.goodsafariguide.com/AwardsSite/judges/

  They do not work when trampled in correctly, but there is a little problem with validation.

  Basically when you complete a form properly, the page reloads with accordion of the closed form. When you open it upwards, his watch the ugly error in the search at the top of the form.

  Any ideas what is causing to act like that, as opposed to the way it works in the first link?

  Thank you.

  Iain71 wrote:

  ....

  I have corrected to re-create (it is true that for the most part by Save under...) same features here:

  http://www.goodsafariguide.com/AwardsSite/judges/

  They do not work when trampled in correctly, but there is a little problem with validation.

  When you look at the source code, I emphasize that - unlike the first page - this a doesn´t contain all references to uninstall form validation libraries ("... / includes/tng/scripts/FormValidation.js"and"'... / includes/tng/scripts/FormValidation.js.php '), which means that the work of can´t of validation.

  See you soon,.

  Günter

• My filter (for ads) works for some shippers, but not for others

  I have several filters. One is "Advertising" for ads I want to read later, but need not be cluttering up my Inbox. It seems to work for a couple of the entries but ignores the rest. I checked the spelling, and they all seem to be correct. My settings are:
  Apply filter by operating manually,
  Apply the filter when getting new messages, filter before spam classification,
  correspondence to one of the following values
  Contains (followed by the name of the seller, such as honda, staples, cvs).
  Move messages and ads

  This is a support forum for Firefox. You will need to contact your
  e-mail assistance provider.

  The filters have all send your 'junk e-mail' folder, but the implementation
  a list of 'safe' for those that you want.

  Separate the issue;
  Shows details of the system;

  Plug-ins installed

  Adobe Shockwave for Director Netscape plug-in, version 12.1.2.152
  Adobe Shockwave for Director Netscape plug-in, version 12.0.3.133
  
  Having multiple versions of a program can cause problems.
  You must remove older programs. Then download the current full installer.

  Shockwave Director:
  Shockwave Standalone install / Uninstaller {web link}
  Shockwave Director Version 12.2.1.171 http://get.adobe.com/shockwave/

• Problem of print dialog box. Cannot change the selection of the printer. Box is stuck on Canon Fax series printer in the dialog for some programs, but not all programs.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • Adobe Reader; Mozilla Firefox will print for the Canon Fax (not my default printer) series.  I am trying to print on a printer HP 7300, which is my default printer.
  • I can print to the printer HP 7300 of Microsoft Word and Internet Explorer
  • I have very limited ability to print from Microsoft Outlook, but the number of copies is out of control
  • There is no error message
  • Problem started after a power surge
  • I did a restore of the system for the period before the problem started, but it has not set a problem.  I also ran the Windows Print diagnostic program but found no problem.  I ran McAfee virus scan and found no problem.
  Hello
   
  Your printer is connected to a network?
   
  I would like you to follow the steps mentioned below.
   
  Step 1:
   
  Restart the print spooler service, set the default printer.
   
  a. Click Start, type "Services.msc" in the search box
  b. in Services, right-click on print spooler and then click Properties.
  c. click the Dependencies tab. The first box list all system services that must work for the print spooler start.
  d. take note of each service, click OK, and then restart each print spooler service based.
   
  Step 2:
   
  Update your HP driver 7300 series printer and check if it helps.
   
  See also: http://windows.microsoft.com/en-US/windows7/Printing-to-the-correct-printer
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• How can I change the States on the part of a page, but not all?

  I cannot figure out how Word of this issue to make sense, but here goes...

  I have a page with 2 parts, graphics and Photos... I want the part Photos to have a "next page" and "previous page" button which does not interfere with the graphical part, in case I want to add a next/previous button to that too... but they are all on the same page... so what I have to do a new State for each combination of pages? (like the graphic page 2 and photos page 3 together, graphics page 2 and photos page 4 together, etc. etc.) because I could probably do this... Or y at - it an easier way?

  Thanks in advance!

  Your solution here is the custom, components, each of which can have its own States. Make graphics part a custom component, and the pictures part of a custom component. In this way, you can the buttons to the pictures component that changes its States, the graphic component leaving unaltered.

• Sharing layers to Pages, but not all States

  It is possible to share a layer to State 2 to other pages, without this layer goes to all States?

  Each page of your document contains layers and each layer has different States. Unfortunately there is no option to share with States, but only the layers. Thus, when you share a layer, you include all the States of this layer.

  (Note that when you select a State and click on the layers panel, you cannot see all of the other States of this layer. This does not mean that the layer is included in a State, but it's only a visibility option. "Look you different States of a layer).

  The thing is that the States are in addition to each page. I mean you can't share a layer with 2 States, to a page with only 1 State. If you do this, only the first State is shared. Even setting a page as masterpage is not going to include the States of this template to any third party, unless you have already added the States to the other pages as well.

  In any case, you are unable to share only 1 State of a layer to other pages, unless it is the first.

• H.26 Blu Ray. Only play on some players, but not all! Help

  I am a wedding videographer and tried to give a couple their latest video for weeks.

  I have created 8 different images of the final video but no luck.  I put the disc in my PS3 and it stutters and freezes and random points.

  I put the disc in another Sony stand-alone player and he did the same thing.  I then put the disc in a Sharp Blu - ray player, and he played without any problems.

  I even tried to use another brand of discs to see if that would fix it but still not.  I tried using dynamic links, then meida encoder for blu ray file and brining the file in again.  Still nothing seems to help.

  I have menus, the motion only I have is music.  They are all menus of stand alone, bound between them (no pop-up)

  The only thing I have not yet tried burning an mpeg instead of h.26 file.  Not sure if this will help.

  Anyone else have any suggestions on how to overcome this problem?  I've never had before.  I did many projects in encore and played very well on the PS3

  But it doesn't seem to matter how much I do versions, or changes I.

  Thank you

  It seems that the creation of the disc in mpeg2 blu ray has solved my problem.  This isn't the Ps3 very easily and quickly read more problems!

• Why the Smart Guides work on some objects, but not others?

  Hello world. I try to use benchmarks commented to help me align a small arc in a corner, so I can merge into a larger shape. Well, I got my bow on one of the anchor points and I drag the path to full fitness, but no hanging, no label 'path' or 'intersection' appears. I have all the options for Smart Guides is checked and I've got Snap to Point activated but still no luck. It's a precise alignment, a guessing game. Any idea? -Mike

  

  Hold down the Cmd key while dragging.

• I can't scroll through sites that I connect. something happened in mozilla firefox. It allows to work when I am connected to a Web page, but not now. all I can do is

  I can't scroll through sites that I connect. something happened in Firefox Mozilla. He used to work when I am connected to a Web page, but not now. all I can do is to manipulate the page through links on the page. No sidebar to scroll or the other. It works fine in Explorer, so I know it's a problem with Firefox, also can scroll etc on pages like MSN, Yahoo, etc., but does not not using Firefox, when I connect to one Web site other than the one which is also a search engine, what happened? can you help me?

  You get a pop-up window or dialog style without menu or the toolbar either? In this case:

  38 of Firefox has a little problem with this combination of circumstances:

  (1) turned off tabbed browsing
  (2) viewing a page in a private window
  (3) you click on a link encoded with target = "_blank", which launches the link in a new window

  The new window opens without menus, toolbar, scroll bars, etc.

  Work on this bug is in progress, but I don't know if the fix will be available in the coming weeks. These are the known workarounds so you can continue using windows browsing private - one of them will work around the bug:

  (1) use tabbed browsing (there is a checkbox in Options > general > "Open new windows in a new tab instead");

  (2) shift + click the links to open in a new window with standard features. or

  (3) change a bunch of hidden settings as explained below - it will not you make changes to the way you use Firefox, but sometimes you need to enlarge some small pop-up windows that have been sized for a window with no toolbar displayed.

  # 3, here are the steps:

  (A) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (B) in the search above the list box, type or paste feat and make a pause so that the list is filtered

  (C) for each preference that begins with dom.disable_window_open_feature. , if it is not 'true', double-click it to true.

  You may find that you prefer this anyway, given that sites can band is more these pop-up windows features.

  Who is relevant or do you have a different question?

• Menu Widget provided with Muse shows some but not all my submenu items.

  Menu Widget provided with Muse shows some but not all my submenu items.

  Here is the site on catalyst: http://cgfnewsite.businesscatalyst.com/index.html

  The problem is in the submenu of the media/articles.  It only shows two and there are many others.  If you go to the page you can see all the links. I have the page hierarchy properly set up in the title of the page articles with titles.  I've even shortened to see if it works.

  Under the videos link all sub links appear.

  Any help would be appreciated.  I code a little, but I'm not very good.  So please be technically.

  Thank you!

  Go to outline view, click with the right button on a page "invisible" and

  (1) make sure, that under 'menu options' the point 'include the page with hypertext links' is enabled.

  (2) choose the option 'Page Properties' and check 'Page Properties/Options', the "Export Page" element is turned on.

• Firefox manages not to display images much (but not all) on the Web sites that I visit, certain images are displayed and some are not even if they are in the same format.

  I recently changed my ISP because I had connectivity problems. Especially my router would be closed sporadically. As part of my attempt to identify issues, I ran some spyware that I was told that I could trust. Since then, I have a problem looking at many websites as much (but not all) images are missing, even on websites that I know very well, including my own. What is odd, is that on one site each page has an image jpg under the navigation bar and all these jpg appear except for one who does not even appear when I reload images. This problem also makes security of sensitive sites as my amateur full site look Bank that scares me. The problem does not occur on other web browsers.

  What spyware software do you run?

  Make sure that allow you pages to choose their colors and you have not enabled high contrast in the Windows accessibility settings.

  • http://KB.mozillazine.org/Website_colors_are_wrong
  • http://KB.mozillazine.org/Websites_look_wrong
  • Check the permissions for the domain in the active tab in "tools > Page Info > Permissions.
  • Check that the images are enabled: Tools > Options > content: [X] loading images automatically
  • Check exceptions in "tools > Options > content: Load Images > Exceptions.
  • See the tab "tools > Page Info > media ' for blocked images (scroll all the images with the cursor key).

  If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

  There are also extensions (Tools > Modules > Extensions) and security software (firewall, antivirus) that can block images.

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes
  • http://KB.mozillazine.org/Images_or_animations_do_not_load

• My navigation links on some pages and not on others. All bearings have a link page, in the master page.

  My navigation links on some pages and not on others. Only 2 of my 7 links work on the home page, 6 of the 7 work on another, and on other pages, they work. They are all together in the master and are linked to their corresponding page. No idea why?

  Layers. There is other content on top of your navigation. Even the transparent part of the other objects will block the mouse events to reach your NAV.

  At this point you probably just 'Layer 1' in the layers panel. Content on the layer 1 on the master page will always be behind the content on the layer 1 on the page to that master is applied.

  Create a 'layer 2' (which will be on top of the layer-1) and go to navigation. Now the navigation will be on top of the element on the layer 1 on your page and these elements will block are more mouse events to reach your NAV.

• First research of 2015 CC does not always work. For example, it will find all items that contain 'Toronto', but not all items that contain "Arnold".

  It's very mysterious. I did every step several times. I type in a single word that I know for sure watch upwards in multiple file names. Sometimes it gives me all the relevant results, sometimes it gives me no result at all. I double checked to make sure that I was looking for all the metadata. I checked, to be sure, I was typing in the correct spelling.  The only thing I changed in all cases is the word that I type in the search box. Here's what's worked and what didn't.

  Has worked:

  Toronto

  1996

  Claude

  Claes

  Proj

  Poster

  Strachan

  Pop

  Does not work:

  Arnold

  REPAR

  Adler

  Noona

  Opening

  Case No.

  Frank

  Œuvres for some files but not others:

  Wave

  I think that those who are not displayed is those where I've added something to the file name in the first, but why whatever? Is there a way around it?

  I'm on Mac OSX El Capitan v10.11.1 on a Mac Pro (end 2013) 3.7 GHz Quad - Core Intel Xeon E5 with 32 GB of RAM

  If you think this is a bug:

  Feature request/Bug Report Form