JTable to use a different TableUI than BasicTableUI the value

Similar Questions

• text messages sent with an email address from a touch ipod duplicated on a second ipod touch using a different email address, but the two ipods are controlled by a parent with the same apple ID and password.

  Text messages sent with an email address from a touch ipod duplicated on a second ipod touch using a different email address, but the two ipods are controlled by a parent with the same apple ID and password.  This has happened recently.  My two girls have used their respective ipods and texting, without their messages of duplication for each of the other ipods for more than a year.  Somehow recently, both addresses seem to be synced with them or something, so that both see each and other messages.  I've recently updated two ipods, iTunes on my computer--not the cloud and added music for two ipods, but has not changed anything by email email settings or message I know.  Help, please!

  Welcome to the Apple community.

  I can't fully follow how you have everything set up, but a glance at the settings > messages > send & receive

• I have a chase bank credit card that I have good ranking and what number do I call to talk to I tunes because he says, use a different card, it's the map I was buy everything what I tunes. Is it because I have challenged their load m

  I have a chase bank credit card that I have good ranking and what number do I call to talk to I tunes because he says, use a different card, it's the map I was buy everything what I tunes. Is it because I thought them charge me twi

  Can I have it please the number on I tunes support whether please or have them call me at * Leonardo B *.

  < personal information under the direction of the host >

• Redirect to different pages based on the value of linked report table

  Hello
  
  I wanted to navigate to different pages of a report link based on a value from the table on which the report is based. I was able to link to a particular page without any problem.
  
  But I wanted to link to different pages depending on the value in the table. Please let me how can know I do this?
  
  Thank you

  Kaminey wrote:
  I use Apex 4.2 and my report is a classic.

  If I click on empID in a classic report, now it redirects to page 1. Now what I want to do, if I click empID, if his role as MANAGER he should redirect to page 2 and fill out the form on the page with the details of the employee. The role of the employee is ANALYST should redirect to page 3 and fill in the form on the page with its details

  This approach makes maximum use of the APEX has standard and minimizes the extra programming.

  1. If it is not already included as a displayed value, include the role column giving the value of MANAGER/ANALYST as a hidden column in the report.

  2. create the link in the column on the EmpID column, with the target of the link on the same page as the report and ask the role column value (for example #ROLE #).

  3. on the page of the report, create a On Load: front branch to page 2, with an request = Expression 1 condition with 1 Expression defined for the MANAGER.

  4. on the report page, create a On Load: front branch to page 3, with a Request = Expression 1 Expression 1 ANALYSTvalue condition.

• ASA 5520: SSL VPN by using a different IP address that the ASA public IP address

  Hi guys,.

  I'm trying to configure an SSL VPN on a Cisco ASA5520.

  Unfortunately port 443 interface OUTSIDE of the SAA is already used by Microsoft Outlook Web Access and I can not change the configuration of Outlook. This configuration already in place allows me to use the public IP address of the ASA as IP Cisco VPN for the Web page.

  I don't not want to use a different port so to keep life easy for users.

  I have a few available public IPs that I can use so I wanted to use one of them instead of the OUTSIDE of the ASA interface. Any idea how I could do?

  Thank you

  Dario

  Unfortunately you can not use any other public ip address, except the ASA outside IP interface to complete the SSL VPN.

  The only options that you have is to change the Outlook to use another port or the SSL VPN to use a different port.

• Apex 5 schedule: different color based on the value of data field

  Dear Experts,

  I need to have a different color for each record on the calendar based on the value of the data field (eg. category).

  How can I achieve this?

  Thank you!

  See: -.

  You don't have to wait for APEX 5 integration FullCalendar ~ Blog of Doug Gault...

• Redirect to 3 different pages based on the value of the Auto complete field.

  Hi friends,
  
  I use a "Auto complete field" in a page for research (Apex version 4.0). But I need to get the values of the 3 tables and when you click on the redirection of the value to one of the 3 pages based on the value.
  
  For example, I have 3 tables. 1 customer 2 Sites 3.Employees. When I enter "c" in the search field, I need to get values of 3 tables in this area "AutoComplete". That is to say, if I have a customer with the name "cusotmer1", "customer2" and the location with the names of "cisc1", "cisc2" and employees with the name "cid1", "cid2"; When I enter "c" in the FQDN of the auto all 6 values must be given in the "AutoComplete" box and clicking on "customer1" / "customer2" need to redirect to the 'customer' page When you click on 'cisc1' / 'cisc2' redirect to 'site' when clicking on "cid1" / "cid2" redirect to the page of the employees. Is there a way to do this. Help, please.
  
  
  Kind regards
  NAV

  Net asset value,
  Here is a sample page that uses the code I proposed works fine for me with FF and IE (8.0).

  http://Apex.Oracle.com/pls/Apex/f?p=18:3

  Note: I've added a warning message before being submitted

  This page works by your side?

• HP Deskjet 3520: Printer uses a different color than the original

  Although I have a lot of little black ink low on color my impressions are coming in red now in yellow instead of black and Red

  Hi @Deborahdebster

  Welcome to the Forums of HP's Support.   I understand that when you print using your printer Deskjet 3520, a problem of print quality with regard to the colors.

  I've included the document to solve the problems of quality Print to the HP Deskjet 3520 and HP Deskjet Ink Advantage e-all-in-one 3520 Printer series . There the steps you want to fix the problem of print quality.

• We can use a different accommodation than Adobe?

  Some time ago, I read somewhere, we can use another server hosting to distribuite rights with enterprise edition, but on my recent research, as I can't find anything considered that. I have a bad memory?
  Simple-we looking for a cheap solution to distribute single items as a single folios in our future application, rather a single question. This can multiply x 25 for us the cost if we have to pay for each unique download instead for the GB of traffic.

  Or Adobe may provide, like many other competitors, also a GB of traffic?

  All the items/forms should be hosted by Adobe at the use of DPS. There is no alternative to the hosting option, and prices are per download of folio, not per GB.

  Neil

• I want to erase the search results for certain searches. When I search for some keywords I get old SERPs that I know are not up-to-date. If I use a different machine, I get the current results. I can't find how to clear it.

  I am tracking my own Web site position in search rankings. For a short period, he appeared on page 1 for certain keywords. It is now on page 2 or 3, (as seen by me and other users when you use another computer or a browser), but when I search on my computer I see the old pages of results showing the top of page 1. How can I erase these old pages of results?

  If you press Ctrl and F5 at the same time, that changes? I think that Google (I guess that's what you're referring to the) changes in search results is inspired by a little if you are connected and preferences, etc.. Try to connect on google if you are connected.

• Audition 3 seeing pricing different sample than that the device presents

  Hello

  I just installed Adobe Audition 3 and 3.01 patch, on a brand new system running under Windows 7 64-bit. The motherboard is an Asus Sabertooth X 58 using Realtek High Definition Audio. Device drivers show that for line input audio sampling rate is set to 24 bit 192K. I wanted to put up the sound card would test the performance and audio quality.

  The problem is when I raise Audition 3 and hit record, I get the message 'we don't support recording when your file does not match your hardware sampling rate. Current hardware sample rate is 44100 Hz." Clearly, this isn't the case since the line properties - Advanced tab displays "2 channels, 24-bit, 192000 Hz (Studio quality).

  According to the installation of the audio of the hearing, it shows only one choice for Audio Driver: Audition 3.0 Windows Sound. It also displays the sample rate: 44100 Hz, clock Source: internal buffer size: 2048 samples with no way to change these values.

  If I click the button on the Control Panel, I get:

  DirectSound input ports:

  Device name: line (Audio device high definition)
  Audio channels: 2
  Bits per sample: 16

  Anyone know how I can change these settings to get the hearing agree with device settings?

  Thank you

  Dale

  DaleChamberlain wrote:

  Anyone know how I can change these settings to get the hearing agree with device settings?

  I'm afraid that life is nowhere near as simple as that. The main issue here is that hearing, in common with most of the audio software, uses a system of driver called ASIO to speak with the audio device - it will cancel much of the operating system and significantly reduces the latency of the system. There are several problems with ASIO if - the first being that it supports only one device per system (or sometimes multiple devices identical if the manufacturer can make look like a single device) and with software designed to use this driver, then to use any other driver (like a native Windows) you must use a converter like ASIO4ALL step. This convert the ASIO WDM Stream and allow you to use multiple devices sound - but with an increase in latency.

  That's the second problem that will really you stuff well - and it's quite reasonable, ASIO is limited by its inventors to run only three sampling frequencies; 44.1 k, k k 48 and 96. So there is no way you can run that you think that may be a higher quality setting. All of the above parameters even 48 k make your audio device much more difficult work and what for? All that happens is to increase the potential bandwidth to well beyond the range of human hearing - to no purpose at all. You do not have sources that can produce useful at these frequencies output, and you certainly do not have the means to reproduce. This all is well documented and explained before, so I'm not all that again. In a Word, Nyquist points out that any device digital sampling has a bandwidth limited to a maximum of half of the sampling frequency, for 48 k which gives us a frequency upward to 24kHz response - comfortably more high that any adult can hear from far away. Whatever it is you enjoy and save out of it using the same 96 k nothing but noise is as far as humans are concerned, and unpercievable of noise to that.

  What says the line properties tab is so, if you have a no ASIO driver designed to support all the possible, possible rates. You don't have an ASIO driver is available, because it is a built-in audio device, and anyway you have already pointed out that it uses the Windows driver for the hearing (a lighter version of ASIO4ALL, actually), so a conversion is already underway. Call Realtek as "High Definition Audio" does not exist - all audio devices built of this nature exist to universally of poor quality and improve it that you would need an external device - which are numerous, usually with ASIO drivers dedicated. But none of them works with ASIO beyond 96 k, everything simply because the standard does not support higher rates.

  If you download and use ASIO4ALL (it's free), then you will get a control panel extra that will show you exactly what your audio device is able to do as much as hearing or any software ASIO is concerned, it is a useful diagnostic tool anyway, so it is better to do. Simply select this option during installation, instead of hearing Windows driver.

  I'm sorry to be the bearer of what appears to be bad news, but in fact, it is not. You won't see any difference in quality at all the clocked at something beyond 48 k sampling frequency; everything you do needlessly wastes the resources of your computer. Waste you the resources processing and disk space available by treatment at ridiculously high sampling rate, and there are zero returns.

• Some sites no longer works: Firefox 35 send url using a different strategy to encode the url of ff 34

  Hi *.
  I updated firefox to 34 to 35 and a site of mine (http://www.dolomiti.it) don't work propely anymore.
  If you are looking for a place we'll tell Merano for a given date, missing the date da.
  Debugging showed that the url

  http://www.Dolomiti.it/index.php?ID=4004 & user_ajaxsearch_pi1 [idZona] = & user_ajaxsearch_pi1 [idLocalita] = 207 & user_ajaxsearch_pi1 [type] = 2 & user_ajaxsearch_pi1 = 0 [idTema] user_ajaxsearch_pi1 [tipoStr] = - 1 & user_ajaxsearch_pi1 [star] = 0 & L = 0 & posit_booking [of] = 20/01/2015 & posit_booking [to] 21/01/2015 = & posit_booking [detail] = [{% 22Indice % 22:221% 22% 22Tipo % 22:221% 22% 22Persone % 22 [{: % 2218,18% 22, % 22Camere % 22: 221% 22}] & [nodate] posit_booking = 0

  will be sent to the web server coded as:

  http://www.dolomiti.it/index.php?id=4004 & user_ajaxsearch_pi1% 5BidZona % 5 d = & user_ajaxsearch_pi1% 5BidLocalita % 5 d = 207 & user_ajaxsearch_pi1% 5Btipo % 5 d = 2 & user_ajaxsearch_pi1% 5BidTema % 5 d = 0 & user_ajaxsearch_pi1% 5BtipoStr % 5 d =-1 & user_ajaxsearch_pi1% 5Bstelle % 5 d = 0 & L = 0 & posit_booking % 5Bfrom % 5 d = 20 - 01 - 2015 & posit_booking % 5Bto % 5 d = 21 - 01 - 2015 & posit_booking % 5Bdetail % 5 d = %5 B {% 22Indice % 22:221% 22% 22Tipo % 22:221% 22, % 22Persone % 22: % 2218,18% 22, % 22Camere % 22: 221% 22} 5% D & posit_booking % 5Bnodate %5 D = 0

  I looked in the Web server log, and I found that the url sent to the Web server in ff34 has been:

  http://www.Dolomiti.it/index.php?ID=4004 & user_ajaxsearch_pi1 [idZona] = & user_ajaxsearch_pi1 [idLocalita] = 207 & user_ajaxsearch_pi1 [type] = 2 & user_ajaxsearch_pi1 = 0 [idTema] user_ajaxsearch_pi1 [tipoStr] = - 1 & user_ajaxsearch_pi1 [star] = 0 & L = 0 & posit_booking [of] = 20/01/2015 & posit_booking [to] 21/01/2015 = & posit_booking [detail] = [{% 22Indice % 22:221% 22% 22Tipo % 22:221% 22% 22Persone % 22 [{: % 2218,18% 22, % 22Camere % 22: 221% 22}] & [nodate] posit_booking = 0

  Here's the query in the apache log:

  188.XX.XX.xx - [15/gen / 2015:09:37:55 + 0100] "GET index.php? id = 4004 & user_ajaxsearch_pi1 [idZona] = & user_ajaxsearch_pi1 [idLocalita] = 207 & user_ajaxsearch_pi1 [type] = 2 & user_ajaxsearch_pi1 [idTema] = 0 & user_ajaxsearch_pi1 [tipoStr] = - 1 & user_ajaxsearch_pi1 [star] = 0 & L = 0 & posit_booking [of] = 16/01/2015 posit_booking [to] posit_booking [detail] = [{% 22Indice % 22 & = 17/01/2015. «[{: 221% 22% 22Tipo % 22:221% 22% 22% 22Persone: % 2218,18% 22, % 22Camere % 22:221% 22}] & posit_booking [nodate] = 0 HTTP/1.1 "301 600"http://www.dolomiti.it/"" Mozilla/5.0 (Windows NT 6.3;" WOW64; (RV:34.0) gecko/20100101 Firefox/34.0.

  188.XX.XX.xx--[15/Gen/2015:09:42:06 + 0100] "GET index.php? id = 4004 & user_ajaxsearch_pi1% 5BidZona %5D = & user_ajaxsearch_pi1% 5BidLocalita %5 D = 207 & user_ajaxsearch_pi1% 5Btipo %5 D = 2 & user_ajaxsearch_pi1% 5BidTema %5 D = 0 & user_ajaxsearch_pi1% 5BtipoStr %5 D =-1 & user_ajaxsearch_pi1% 5Bstelle %5 D = 0 & L = 0 & posit_booking % 5Bfrom %5 D = 16-01 - 2015 & posit_booking % 5Bto %5 D = 17-01 - 2015 & posit_booking % 5Bdetail %5D = b 5% {%. «{22Indice % 22: 221% 22% 22Tipo % 22:221% 22% 22% 22Persone: % 2218,18% 22, % 22Camere % 22:221% 22} 5% D & posit_booking % 5Bnodate %5 D = 0 HTTP/1.1 "301 465"http://www.dolomiti.it/"" Mozilla/5.0 (Windows NT 6.3;" WOW64; (RV:35.0) gecko/20100101 Firefox/35.0 "

  Is this a bug?

  Thanks in advance,

  D.

  rifaccio said

  Fixed to 36.0

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=1121826

• using a Case statement to display the values of column even as table headers

  I have a database that has been set up kind of tricky, in that some tables are made up of columns that are field names and one link to another table that contain the data for these field... also names there ID displays as many lines instead of as a row of data. I would like to write a query to extract that information and display it as one line for each ID.

  example: table 1

  ID, name, itemresponse and itemcode, Description

  Dee Jones Childrens Hospital 123 SITE location

  123 dee Jones, Date of appointment next NEXTAPPT 22/04/2014

  123 dee Jones was on bedrest NOSHOW reason do not show

  I would like to have the display of data as a record on this same patient, instead of as 3 separate registers (with the Description column in table 1

  Table 2

  ID, name, place, Date of the next meeting, show no reason

  123 dee Jones Childrens Hospital 22/04/2014 was the bed rest

  I have included the code I worked on below my question, for me to get the desired results should I use the Case statement and it's the right way to do it below?

  (SELECT
  PAT.ID "PATIENT ID."
  PAT. FIRST | » '|| PAT. "PATIENT FIRST NAME."
  PAT. "PATIENT DOB," DATE_OF_BIRTH
  DS. Date 'Date of inpatients ',.
  Dai. ITEM_CODE "Item Code",
  Dai. DESCRIPTION "Description."
  Siad. ITEM_RESPONSE,
  

  Max (CASE WHEN dai. ITEM_CODE IS "SITE" THEN DAI. Decription
  ANOTHER NULL
  END) AS "name of the hospital."
  
  Max (CASE WHEN DAI.) ITEM_CODE IS 'NEXTAPPT' THEN DAI. ITEM_Description
  ANOTHER NULL
  END) AS 'next Appt Date. "
  
  Max (CASE WHEN DAI.) ITEM_CODE IS "LASTDATE" THEN DAI. Description
  ANOTHER NULL
  END) AS 'last visit Date.
  
  Max (CASE WHEN DAI.) ITEM_CODE IS 'NOSHOW' THEN DAI. Description
  ANOTHER NULL
  END) THAT "the reason has not shown".
  
  Of
  (PAT.ID "IDENTIFYING PATIENT",
  PAT. FIRST | » '|| PAT. "PATIENT FIRST NAME."
  PAT. "PATIENT DOB," DATE_OF_BIRTH
  DS. Date 'Date of inpatients ',.
  Dai. ITEM_CODE "Item Code",
  Dai. DESCRIPTION "Description."
  Siad. ITEM_RESPONSE

  Of
  
  dm_sessions Ds,
  dm_session_assessments dsa,
  DAS dm_admin_sections,
  dm_session_assessment_items Siad,
  Dai dm_admin_items,
  Po Patient_Orders,
  Inventory inv,
  Patients_Table PAT
  dm_admin_categories CAD
  
  where dsa.session_Id = ds.session_Id
  and PAT.ID = ds. Patient_ID
  and dsa.excluded_assessment =' no
  and dac.category_code = 'OPEN'

  and dsa.section_id = das.section_id
  and das.category_id = dac.category_id
  and das.section_code = 'northwest'
  and dai.section_id = das.section_id
  and dsai.item_id = dai.item_id
  and dsai.session_assessment_Id = dsa.session_assessment_Id
  and dsai.excluded =' no
  - and Dai.ITEM_ID = Dsai.ITEM_ID
  and Dai.ITEM_CODE IN ('SITE', 'NEXTAPPT', 'LASTDATE', 'NOSHOW')
  and po.patient_ID = ds.patient_ID
  and in. NDC_NO = inv. NDC_NO
  and inv. TDRUG_ABBREV = in. DRUG_ABBREV
  
  PAT.ID GROUP, PAT. FIRST | » '|| PAT. LAST, PAT. DATE_OF_BIRTH, ds. Date, dai. ITEM_CODE, dai. DESCRIPTION, Siad. ITEM_RESPONSE))

  Hello

  DATE is not a very good name for a column.  Use something like EVENT_DATE, that will not be confused with a keyword from Oracle, instead.

  I don't see something like this column in the CREATE TABLE statement.  He will always be the same value on all lines?

  Here's a way to get the results you requested:

  SELECT id

  first name | ' ' || LastName AS name

  Date of birth

  MAX (CASE WHEN item_code = "NEXTAPPT", THEN item_response END) AS next_appointment,

  MAX (CASE WHEN item_code = "LASTDATE" THEN item_response END) AS last_visit_date,

  MAX (CASE WHEN item_code = "SITE" THEN item_response END) AS location

  FROM mytable1

  GROUP BY id, firstname, lastname, dob

  ;

  Of course, I can't test it very well until you post INSERT statements for the sample data.

  I guess that 2 or more lines of the entry have the same id, then they will necessarily be first name last name, the name and date of birth, too.  No doubt they are standardized in your actual tables.

• Search for users using java API IOM 11 with the value of null field

  Hello
  
  I find user using java api findUsers (HashMap hash), but I need get all users where a custom field is equal to null
  
  Example:
  
  HashMap userHash = new HashMap();
  userHash.put ("USR_UDF_CUSTOM", "NULL");
  userData tcResultSet = userOps.findUsers (userHash);
  
  Someone help me?

  Do not use this search functionality. The user that:

  UserManager usermgr = Platform.getService (UserManager.class);
  Criteria of SearchCriteria = new SearchCriteria ("Custom Label", null, SearchCriteria.Operator.EQUAL); Suppose USR_UDF_CUSTOM label is personalized
  List of users of = usermgr.search (null, null, criteria);
  for (user: user) {}
  perform the action here
  }

  -Kevin

• Using OnChange or OnBlur for changes the value of a hidden field

  I have a need to update the value of a hidden field with the value from a menu of the list. I studied the OnBlur and OnChange JavaScript functions but can't find anything suitable. Here's the deal:
  
  If a user selects California on a list of State menu, I need to immediately update the value of a field hidden with the "California". (Both fields are on the same page) All this must occur BEFORE the user submits the page. Each time they choose the State from the menu to list the value of the hidden field must change.
  
  Can anyone offer any suggestions?
  
  Thank you!
  

  Well Yes, that did the trick for the hidden field. Thank you very much.

  I'll be able to also store this value in a session variable? (see previous post)