Judgment of spooller Vista. Why? How to start?

Similar Questions

• When starting, I wonder to choose between XP or Vista? I have XP NOT Vista! How can I remove the reference from Vista?

  My system has been initially implemented as a Dual Boot XP / Vista. Vista has been deleted and I would like to delete the reference from Vista in the trunk. In the case where someone boots into existence no reference of Vista, the systems does not crash but goes in a loop in question, try to Boot. By answering the questions, the system takes you to the initial question, with "an earlier version of Windows or Vista? How can I eliminate this? It is not a problem, once you know you have to select "older version", but if you do not, the timer runs out and trying to boot Vista. Many people use this system and good day, they get caught up in this cycle.

  Best regards

  Mike Lynch

  Best regards

  Mike Lynch

  Your master boot record think you still have Vista.

  You can fix this since the XP Recovery Console.

  You can start RC since a genuine XP bootable installation CD or make you a CD bootable XP Recovery Console using these instructions:

  http://www.bleepingcomputer.com/forums/topic276527.html

  After booting into the Recovery Console, you should be in this folder:

  C:\WINDOWS

  Enter the following command and answer Yes to the warning:

  FIXMBR

  Enter the following command and answered in the affirmative:

  Fixboot

  Remove the Console CD recovery and type 'Quit' to restart your system.

  Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony.

• How can I fix acer 5720G running vista that won't start?

  My wife stop down as always. The next time I went to use my laptop, it would not initialize but went into a loop instead. I have no cd/dvd backup. In my view, that the backup is located on a partition. I can't access it. I tried a lot of things in the last 2 months without result. I installed ubuntu to access the hard drive to remove all the important files.
  What can I do?

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  And make sure you only set the CD/DVD drive to be 1st in the boot order to boot from the drive that you have just made

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact Acer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought it because you do not have a disc

  You should have a hidden in an Acer recovery partition

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  Acer is normally Alt + F10 at startup to start the recovery process

• my windows using vista family advocate premium start not anymore, how do I replace it?

  my windows using vista family advocate premium start not anymore, how do I replace it?

  What other security programs you have running? Many as MSE, Norton, McAfee, AVG, etc., will stop Windows Defender because they have the same functionality, and having two programs running at the same time and make security the same work can lead to conflicts. This is by design and must be accepted by the user.

• How to start VDS in Windows Vista Ultimate 64-bit?

  I have a problem, and it's been a while and still not solved...

  I have Windows Vista Ultimate 64-bit right now and I want to upgrade to Windows 7, but installation is NOT going through perhaps because of the virtual disk service.

  How to START the virtual disk service? Everytime I try through services, I get an error 3: the system cannot find the path specified.

  Please tell me HOW to start the virtual disk service. and please do NOT move this thread on the forum windows 7, I posted in the front Vista section and moved to the region of Win 7, where my problem has not been resolved. Please leave it in this section. Thank you.

  Ok. The file is in the right place. The registry is missing the path to
  the file. Wonder how that happens - sigh?
   
  Type Regedit in the search box of the start menu.
   
  Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\vds
   
  Right-click on an empty area in the right pane - choose new - extensible
  String value. Name ImagePath (F2 key renames it). Double-click
  ImagePath and assign
  %SystemRoot%\System32\vds.exe
   
  Now you can start the service?
  --
  ..
  --
  "Jouho" wrote in message news: b35bf627-5 c-4 c 17 72-91df-57439b0880bf...
  > Thanks for the reply!
  >
  > Here are 2 pictures of 2 orders that I put in the command prompt, which
  > that means?
  >
  > http://oi54.tinypic.com/330chll.jpg
  >
  > http://oi55.tinypic.com/x0ohhi.jpg
  >
  >
  >
  > Thank you
  >
   
   

• laptop HP 2000: how to start my laptop hp 2000 pc using CD ROM

  I NEED TO START MY LAPTOP HP 2000. BUT I DON'T KNOW HOW TO START USING CD ROM. CAN U GUYS HELP ME SOLVE THIS PROBLEM

  Hello

  To install Windows 7 64 bit on a disc with a guid partition table you need to do the following.

  Judgment of the laptop.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Bios Menu ( f10 ).

  Under the System Configuration tab, expand the Boot Options Menu.

  You must set the Secure Boot to disabled and legacy devices on " Enabled".

  When you're finished, press f10 and select this option to Save the changes.

  You will then need to enter a PIN of 4 numbers displayed on the screen to confirm the changes to the settings - enter the code and press ENTER.

  Insert the Windows 7 installation disc and the laptop shutdown .

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).

  Use the arrow keys to select the CDROM (uefi) option ( Note: you must choose the cdrom option that has the (uefi suffix ) and press ENTER - if you are prompted to "Press any key to continue...) "- make.

  Kind regards

  DP - K

• Wiping clean Vista for a new start...

  I'm not so smart when it comes to computers, and my computer is messed up, and all my computer savvy friends say I should just wipe my computer and reinstall everything just once again, so I tell myself until I do I ask around and get a guide step by step easy to reset vista and see if it was still an option. Here are some facts on my computer, it is as the age of 5 years or something and Vista was already installed and did not come with any disc or code or whatever it is, so I'm kind of scared that if I do this reset I lose Vista and not have a BONE or something like that which may not be the case, but for a noob like me, everything is possible. in any case it is the 32-bit of Windows Vista Home premium (and if you need more information just) help me understand if it's the right thing to do! Thank you.

  Hello

  There are several methods to reinstall Vista.

  Save all data before you do, because it will be lost.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I wiped my pc and my windows vista. How can I get a copy, reinstall.i have the product code?

  I wiped my pc and my windows vista. How can I get a copy, reinstall.i have the product code?

  Hello

  If Vista is preinstalled contact the Manufacter computer and ask them to send recovery discs; what they should do for a small fee.

  And ask them if you have a recovery partition on your hard drive to reinstall the operating system to how it was when new.

  If you have not deleted this partition (you tell how wipe you the hard drive!) you press F10 or F11, etc at startup to start the process of relocation.

  Ask the manufacturer for their combination of button to do this, if it is always an option for you.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  See you soon.

  PS You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista must be installed. The product key determines which Edition is installed.

  Builders recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

• Windows Vista will not complete start up

  Help

  me

  cant

  beginning

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• Every moment & then my Vista Original fails to start after an automatic update & shutdown.

  I had upgraded from XP to Vista Home Premium.  All updates are on. I also use Microsoft essential security such as anti-virus protection. Every moment & then my Vista Original fails to start after an automatic update & shutdown. I had to reinstall all my programs. Happen 3 - 4 times in less than a year. The disturbances windows also does not work

  Any Advisor. Should I upgrade to XP?

  Hello

  Make sure that you do not install hardware 3rd party via windows update drivers

  they are normally not up to date and can cause computer problems

  change the way you receive updates and check what you install ad if you don't not right-clicking on UAC prompt you to hide it:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  and if you're still stuck in a loop non-Boot read these methods on how to try to fix it:

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  ;

• Vista, why my cursor jumps around on the screen without reason?

  Vista, why my cursor jumps around on the screen without reason?

  You are using a laptop with a touchscreen?  Chances are good that you accidentally touch the touchpad while typing, and that moves the cursor.  Go to start / Control Panel / mouse and see if there are controls for adjusting the sensitivity of the touchpad or to disable the touchpad while typing.  Go to the web site of the manufacturer of your and download the latest device drivers, firmware, and software for touchpad you and your mouse (if you also have a mouse - you may have to go the manufacturer of the mouse for these drivers, if she did not come with the system).  New updates can offer options that did not exist before like the ones I mentioned.

  This happened to me also and I bought a separate mouse and disabled the touchpad and the problem disappeared - but he had me past for awhile until I finally figured it out by typing differently (with my hands up higher so the Palms do not touch and had no problem).  Even if this isn't the problem, update the drivers, firmware or software can solve the problem on its own.

  If none of the works above, we will need either to run a complete troubleshooting procedures (post back and I'll meet with them) or the touchpad or mouse is defective and must be replaced.  You can discuss these last with the computer manufacturer when you talk to them (if you talk to them).

  I hope this helps.  If you have any questions along the way, come back and I'll do my best to answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to start GMchallenge3

  Hello, I have a problem starting my reciently downloaded GMchallenge3 (chess program) program. I bought yesterday from the target in the form of a CD rom and installed it on my computer. He started a half an age of time. However, now it does not start when I click on it in the start menu, after that I have let the axess programme on my computer. Can someone tell me how to start to solve the problem? Thank you.

  It's Vista Security Forum, NOT the Forum Vista programs.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe

  O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• How to start my subscription abroad with the foreign language and writing unknown?

  How to start my subscription abroad with the foreign language and writing unknown?

  These can also be useful:

  FAQ: Is creative cloud available in my country?

  FAQ: Why my purchase showing the wrong currency?

  FAQ: How can I view Adobe web pages in another language?

  FAQ: How can I change the country associated with my Adobe ID?

  FAQ: How can I change the language that appears in my creative cloud app?

• How to start a community Homekit (home app)?

  Homekit needs love. How to start a community of support for her?

  Excellent idea. I forwarded your suggestion to the moderators of Apple. Be aware, it takes time to get the results.

• How to start a text.

  How to start a new text on iOS Apple Watch 3.

  Hello

  Instructions for sending a new text are available here:

  https://help.Apple.com/watch/#/apd92a90f882