Ss15 Touchpad stop working, do not show in the devices

Similar Questions

• Ethernet adapter is not showing in the Device Manager

  

  I have a vastro 460 with i3 with intel and Windows 7 32 bit. try to install the driver for the network card, but does not. Ping works but do not show in the Device Manager.

  Any help will be much appreciated

  Hi EMH.

  You will need to install the Chipset Drivers first and later network adapter drivers. The IP address that you have ping is the local host and works, even when there is no network card detected.

  Please download and install the NIC in the network section and the section Chipset Chipset drivers from the following link, by drilling in the serial number:
  http://Dell.to/QjjZDA

  Please let me know if you need more assistance.

• Apple dvd player will not eject a disc, does not show in the devices

  I'm on El Capitan, the player has played other discs, this disc does not appear

  There is no manual of the dvd drive eject

  drive does not appear in the devices

  Get help with the SuperDrive slot on your Mac - Apple Support loading

  How the disk by force ejecting

  Mac Mini

  How to eject a defective DVD?

• Why Internet explorer does not work well, stop working, do not dowlown and the printer too

  When I use the Microsoft Office word 2003 stop working. I can't use the printer because it says I don't have enough right. Internet explorer stop working when I want to use. When I said work stoppage, because stop (the word screen "not responding") and for seconds, I have to wait this back and start to work so slow.  I also have a lot of problems with the dates.

  Please can you check my computer and advise me how I can solve these problems.
  Thanks for your help
  Alicia of Bazo

  Hello AliciaD'Bazo,.

  Thank you for your message.  How long these problems last?  If all of these symptoms have occurred recently, you can perform a System Restore to a point when your computer was functioning as designed.

  If a system restore does not resolve the problem, I think that you would be better served download and run the malicious software removal tool.

  After you run the tool, you will find that your computer is or is not infected with a virus or a virus.  At the same it is, please post on the forum Vista Security steps to return your PC to a usable state.

  Another way to ensure that your computer is 100% clean is to perform a new installation.  Don't forget that a new installation will delete all your data and the current settings.  You would need to save everything that is important before you perform a clean installation.

  We can't wait to hear back on your part.

  See you soon

• Realtek NIC does not show in the Device Manager - until a hardware scan is done

  A few months ago, I purchased a dv6 3240us and not downgraded to XP Pro win7 no problem, everything has been installed - everything I tried worked fine without any problem at all. I do not use this computer on the Internet - but I got the opportunity to connect the NETWORK card to a piece of equipment, I was working on that. When I went to change the IP address of the laptop - no local NIC (supposed to be Realtek) present in the Device Manager.  I installed the driver when I went down to XP without error.  I can only see the wireless adapter and it also shows on the system tray. When I right click on network adapters in Manager devices and do a scan for the hardware - the Realtek card is? and now everything works fine until I stop, then I have to go the process again. I watched the Realtek driver and he says its all working properly - any suggestions?

  Hello:

  I'm not familiar with the BIOS settings too consumer laptop, but see if there is a setting for a LAN Power Save Mode - maybe in the configuration menu of the device.

  On HP Business laptops, there is such a context, and the default value is enabled. What is this setting is to remove the wired NETWORK card at least that the PC is plugged in and connected to a LAN cable. This saves battery power.

  They also have a LAN/WLAN definition switch that disables the NETWORK adapter when the other is in use. For example, if I plug a wire to my Wired NETWORK card, my wireless NETWORK card is automatically disabled.

  If you have such a LAN Power Save setting, turn it off, and your NETWORK card must always be visible in Device Manager.

  Paul

• my dvd drive has stopped working. says windows cannot load the device driver, can be corrupted or missing code 39. When I search for updates, it says I have the most up to date. Help!

  drive is Matshita DVD-RAM UJ-850 s a SATA drive

  I use windows Vista

  Driver provider Microsoft

  Day 21/06/2006

  Version 6.0.6002.18005

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• stream HP: touch pad work usually also do not show in the device

  Ive tried troubleshooting devices it finds several film and a cpl that the system could not find the driver, don't know what to do next?

  SOLVED! Need to go to the Update Center feature and update pci2 contoller, although new Thank YOU MICROSOFT! HP NO. HELP AT ALL!

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment

• Re: Realtek 8191SE card will not show up in Device Manager

  Part number Satllite L450D-128: PSLY5E-01301LEN, Win7 Ultimate 64-bit.

  Hello

  I can't use my wireless internet connection. The connection to the LAN works fine when connected via a cable.
  I have read all related topics to make sure that I'm not repeating a problem already solved, but I can't figure out the problem.

  The connection in the status bar indicator displays no network available.

  The wireless light on the front of the laptop does not illuminate.

  FN + F8 does nothing (even after delivered to zero cards flash with package etc.) 8191SE map does not show in the Device Manager and tried to add manually without success.

  I installed the last card wireless driver specific to the 8191SE yet once but nothing.

  I also removed the card and re-sitting there but still nothing shows in the dev Manager.

  I've also updated my BIOS and made sure the wireless is turned on.

  Any help would be greatly appreciated.

  Thank you!!

  Do the last ultimate test: install original recovery image that you got with the functionality of your laptop and check.
  If the material is OK that should be listed in Device Manager after installing the driver on the right.

• iCloud for windows has stopped working - no data showing. Everyone knows this? Found a fix?

  iCloud for windows has stopped working - no data showing. Everyone knows this? Found a fix?

  I've recently upgraded to a Windows 10 laptop and have had problems with iCloud.  I can't access the photos at all - old hard drive Windows 7 accesses as before, except all my original photos (not Photostream - in folders) seem to have been deleted but it is now downloading Photostream when I activated my new laptop, but only back until June 2015.  However, other data seems OK - contacts, calendar, notes, etc.

• Omen of HP 15: Wifi stop working. Win10 shows only a single network and it connects to the WiFi

  Hi guys,.
  Since a few days my wifi stopped working.
  If I click the Wifi icon it shows only a SINGLE NETWORK (two maximum), but not mine!

  

  And I live in a building of 20 + networks, as you can see on the WiFi Analyzer (I'm the only red to the right)
  
  
  
  If I reactive / disable Wifi with fn + f12, it goes back in plane and Wifi mode mode and sees it eventually all networks:
  
  
  
  My Wifi is on top. If it is registered, Windows connects to it and then she abandons the connection; If it is not registered, and I try to connect, it says "you are not able to connect to this network.
  Is fun is that after a few seconds, each network disappears and alone is shown (probably the one next door... I don't know).
  
  I already tried to RESET the laptop MATERIAL by keeping the power button for 10-15 seconds with the laptop is turned off.
  I tried to follow these instructions (http://support.hp.com/us-en/document/c04649175) updated drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [10 default Windows], 18.32.0 [last drivers]) without success. Whenever I have install a new driver, I uninstalled the earlier software Wireless + restart.
  
  I tried to uncheked "allow this computer to turn off this device to save power" on my settings of Wifi hardware without success.
  
  HP network support said that I did not choose a Wifi (really? The problem is that I do not see my Wifi on the list!).

  This is unrelated to a new 10 Windows upgrade since I installed it months ago and this is the first time I have this problem :/ It has always worked
  
  I tried different settings too:
  I changed the channel, I put 802.11 g on my router, APSD off on the router.
  I put "Magic off packet, QoS ad hoc off, U-APSD off, fat wide channel, differential flow mode HT off" on the creation of the map without success. Nothing chaned.
  
  The hardware test detects any failure.
  
  Important note: If I close the router, it shows my network connection with full power and he connects to it. Then I come back in my room (probably 3/4 meters away), it MAINTAINS the connection for 30 / 40 min and he drops the connection and I cannot reconnect to it more. It has always worked perfectly in my room during these months (I bought it in March 2015), so the distance is not a problem, I'm 6 / 7 m away from the router.
  In this case, it shows my network (connected) and the nearby... and the other 20 networks +?
  
  The only way I have is USB tethering with my Nexus 5.
  
  Linux: I tried the WiFi on Freya elementary (Ubuntu linux OS base) and it displays 20 + networks available on the list. He has not the connection problem with my Wifi, but sometimes it stops working, Web pages stop loading and I have to restart Wifi to reconnect to the it (usually after 30/40 min of use it).
  
  -------------------------------------------------------------------------------------

  What is the problem? My Wifi card is broken? Should I call Italian support or if you have any suggestions?

  WAWood,
  I took a risk.
  I did a factory restore with recovery HP (I have a drive dedicated for her)... and it worked!
  I had to switch from Win8.1 to 10, but the Wifi problem is solved!
  
  I'm still guessing that was the problem...

  Now, I'm under Intel drivers 18.30.0.9 worm and all the networks work.
  
  In the next few days I'm checking the linux problem (reset deleted primary partition).

• Satellite L500D PSLT6A - FN keys and touchpad stopped working

  I have a Satellite L500D, model PSLT6A-015003, windows 7 (32 bit) notebook and the keys FN and the touchpad stopped working.

  I downloaded from download of Toshiba, the touch pad and the FN key downloads page, but nothing works.

  Can someone tell me please how to get this working again, even if it's only the touchpad.

  Flash cards are controlled by the utility of Flash cards and this utility is part of the Toshiba value added package. If this package is installed on your machine it remove the system, restart your computer and install the latest version of the Toshiba download page.

  Please also follow option:
  Open the settings of flash cards and set the option to allow the mouse to make the maps and test if it works.

  Please check the touch pad properties. Check if the touchpad is properly listed and enabled in the device (mouse and other pointing devices) Manager.

  Second thing you must check is the control panel > mouse > device (last tab) settings. Make sure that the Synaptics touchpad is listed here and it is not disabled.
  As last step make sure touchpad is not disabled with the combination of FN keys (if possible).

• TouchPad gestures works do not [Aspire V5]

  So I hope someone who works at Acer reads this. Or someone who is technically advanced.

  So, I first noticed the issue with sensitivity. The mouse is very sensitive. Then I noticed that the gestures do not work either. I can't scroll with the mouse. I went in deep and tried to understand the problem (but no solution).

  So I performed these steps:

  1. Changed the speed of the pointer for the fastest (I didn't like the speed of the slow pointer). The pointer was still quite slow.
  2. Has decided to modify the specific drivers for TouchPad. I go to the tab MOMENTUM under the mouse settings. I look and see that the 'Options' button is greyed out. I also noticed it says "Standard PS/2 Mouse.
  3. I decide to find the software to change the settings and it located in C:\Program Files\Elantech. I open ETDAniConf.exe and decide to do a test. I uncheck the click right left click and some other parameters of scroll. Nothing helps.
  4. Then I decided to uninstall it and install the drivers. Did. Nothing has changed. Modification of the wiretap, the scrolling options button does nothing. The mouse settings still shows as 'Standard PS/2 Mouse' even if the tab says MOMENTUM.
  5. I decided to make a big step and just reinstall Windows 8 altogether using Recovery of Acer. Reinstalled, still faced with the same problem. Always known as "Standard PS/2" mouse
  6. I try another way to try to solve the problem. I'm trying to find the similar driver more up-to-date. I find on that was much more recent (version 2013 rather than 08.2012). To install it, restart computer. Always without success. Always known as "Standard PS/2 Mouse.
  7. I decided to go the final round before asking the question here. I downloaded a copy of Windows 8 Pro from the Microsoft Web site and transferred the ISO in the bootable flash drive. I split the hard drive in a clean score (60 GB) and installed fresh Windows 8 Pro on it, without all the Acer drivers. Of couse I was missing the network drivers, so I had to go to my desktop to download the drivers online. I decided to first download the TouchPad drivers. Downloaded, copied to a Flash drive down them on the Acer laptop. Restarted the computer. Always face the question.

  So here I am at the moment. I had the laptop for a good discount of my work (as a bonus working there). It's a time discount. As you have noticed, I mentioned he was grateful as "Standard PS/2 Mouse. It's huge index that tells me that the drivers are really bugs. The problem here is that the TouchPad drivers are not recognized as if it were a touch pad, but as a mouse. A mouse that can just right click, left click.

  If someone is facing this problem or knows how to fix it, please help me.

  So I worked with a Microsoft Technical Support, and apparently the problem is on the side of the Acer. The automatically installed recovery partition the Elantech Drivers for the TouchPad and downloads Web site showed that the pilots Elantech. After some research, we found the Synaptics drivers on their official website and everything started working normally. Please, please, please, please fix this issue. I am frightened by the number of customers who will have to deal with this issue.

• Compatible Snaptics Ps/2 Port touchpad stop working, gives error Code 24

  Last Thursday my Snaptics Ps/2 Port Compatible TouchPad stop working. Code 24 arrives. What is the 24 code and how can I solve this problem?

  Hi linda3398,

  Please see the following about the Code 24:

  Code 24

  This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  Cause

  The unit is installed incorrectly. The problem may be a hardware failure or a new driver might be needed.

  Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

  You may need to update your drivers for the touchpad.

  I hope this helps!

• My touchpad stop working, how re - activate it?

  I had it hooked up to a TV to live stream on the TV screen, in the process of my touchpad stop working and I had to use the mouse to another system.

  Hi Jvergith,
   
  1. have you tried to update your touchpad drivers to see if that fixes the problem?
  2. What is the brand and model of your laptop?

  Remove the touchpad drivers in Device Manager and reinstall.

  To reinstall the drivers for the touchpad by uninstalling current drivers
   
  Sometimes, there may be driver errors that prevent the touchpad from working.
   
  a. Click Start; on the start menu, search type devmgmt.msc and press ENTER.
  b. If you receive a quick click, consent to continue.
  c. expand mice and other pointing devices.
  d. right-click on the component of touchpad and click on uninstall.
  e. once the uninstall is complete, restart the computer.
  f. download the latest drivers for the touchpad of your computer manufacturer website and install it.
   
  Try to follow the link provided to update a hardware driver that is not working properly and check the question below.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.