JVM error 104 on the torch please help.
Hi all
I developed an application for the 9500 series touch screen devices, I tested it on these devices and all is well with the Simulator and the real device.
But when I load it the torch I get the JVM error 104 and I used throughout the app try/catch blocks, but I can catch the source of the error.
I then tried to add the application on a device 9300 and everything works again. For some reason any app just does not the torch.
The application starts fine, but when I select anything within the app it "breaks".
Can someone please help with this problem. If there is anything that I can provide please let me know.
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Thread [BTM__Bussiness_Trip_Manager_ (244) id = 165632000] .ropInternal (suspended (exception IllegalArgumentException)) GraphicsInternal (Graphics) (int, int, int, int, int, Bitmap, int, int, boolean) online: 1403 (Graphics) GraphicsInternal .tileRop (int, int, int, int, int, Bitmap, int, int) line: 1492 BitmapBackground.draw (Graphics, XYRect) line: 211 (int, Graphics, int, int, int) ChoiceBox.draw line: 534 MyChoiceField (ChoiceField) .paint (Graphics) line: 1977 MyChoiceField.paint (Graphics) line: 55 MyChoiceField (field) .paintSelf (boolean Graphics (, int, int) line: 4600 ManageDestinationsPage line .paintChild (graphic design, field) $5 (Manager): 2505 ManageDestinationsPage$ 5 (Manager) .subpaint (Graphics) line: 3175 ManageDestinationsPage$ 5 (Manager) .subpaint0 (Graphics) line: 3150 ManageDestinationsPage$ 5 (Manager) .paint (Graphics) line: 2487 ManageDestinationsPage line .paintSelf (graphics, boolean, int, int) $5 (field): 4600 ManageDestinationsPage line .paintSelf (graphics, boolean, int, int) $5 (Manager): 2510 HorizontalFieldManager (Manager) .paintChild (graphic design, field) line : 2505 HorizontalFieldManager.subpaint (Graphics) line: 320 HorizontalFieldManager (Manager) .subpaint0 (Graphics) line: 3150 HorizontalFieldManager (Manager) .paint (Graphics) line: 2487 HorizontalFieldManager (field) (graphs, boolean, int, int) .paintSelf line: 4600 HorizontalFieldManager (Manager) .paintSelf (graphics, boolean, int, int) line: 2510 ManageDestinationsPage line .paintChild (graphic design, field) $4 (Manager): 2505 ManageDestinationsPage$ 4 (Manager) .subpaint (Graphics) line: 3175 ManageDestinationsPage$ 4 (Manager) .subpaint0 (Graphics) line: 3150 ManageDestinationsPage$ 4 (Manager) .paint (Graphics) line : 2487 ManageDestinationsPage$ 4 (field) .paintSelf (boolean, int, int Graphics) line: 4600 ManageDestinationsPage line .paintSelf (graphics, boolean, int, int) $4 (Manager): 2510 VerticalFieldManager (Manager) .paintChild (graphic design, field) line: 2505 VerticalFieldManager.subpaint (Graphics) line: VerticalFieldManager (Manager) .subpaint0 (Graphics) line 575: 3150 VerticalFieldManager (Manager) .paint (Graphics) line: 2487 VerticalFieldManager (field) (graphs, boolean, int, int) .paintSelf line: 4600 VerticalFieldManager (Manager) .paintSelf (graphics, boolean, int, int) line : 2510 TitleStatusManager (Manager) .paintChild (graphic design, field) line: 2505 TitleStatusManager (Manager) .subpaint (Graphics) line: 3175 TitleStatusManager (Manager) .subpaint0 (Graphics) line: 3150 TitleStatusManager (Manager) .paint (Graphics) line: 2487 TitleStatusManager (field) (graphs, boolean, int, int) .paintSelf line: 4600 TitleStatusManager (Manager) .paintSelf (graphics, boolean, int, int) line: 2510 ScreenDelegateManager (Manager) .paintChild (graphic design, field) line: 2505 ScreenDelegateManager (Manager) .subpaint (Graphics) line: 3175 ScreenDelegateManager (Manager) .subpaint0 (Graphics) line : 3150 ScreenDelegateManager (Manager) .paint (Graphics) line: 2487 ScreenDelegateManager (field) (graphs, boolean, int, int) .paintSelf line: 4600 ScreenDelegateManager (Manager) .paintSelf (graphics, boolean, int, int) line: 2510 ManageDestinationsPage (Manager) .paintChild (graphic design, field) line: 2505 ManageDestinationsPage (Screen) .paint (Graphics) line: 4515 ManageDestinationsPage (field) (graphs, boolean, int, int) .paintSelf line: 4600 ManageDestinationsPage (Manager) .paintSelf (graphics, boolean, int, int) line: 2510 ManageDestinationsPage (Screen) .doPaint0 (line): line UiEngineImpl.paintToBackingStores () 1891 : 922 UiEngineImpl.doPainting () line: 734 UiEngineImpl.processMessage (Object Message, boolean) line: 4236 AppStartUp (app) .doProcessNextMessage (Message) line: 2412 AppStartUp (app) .processNextMessage (Message) line: 1639 AppStartUp (app) .enterEventDispatcher (line): 1452 AppStartUp.main (String []) line: 17
Sorry guys,
I luckely fell appon a thread which solved my problem.
Thanks in any case.
Tags: BlackBerry Developers
Similar Questions
-
Received the wrong error set up the message, please help
I received an error message during the download of PS - 6. Can message says, Misconfigured, help me please download my free trial for Photoshop CS-6.
Thank you
Patti C.
You will need to provide information on the system. As a first step, run the Creative Suite cleanup tool and try again.
Mylenium
-
Am increasing the drive C for XP VM, get error while doing below it please help me.
Am increasing the drive C for XP VM, get error while doing below it please help me.
In this case, the reason is the virtual IDE drive. Increasing the disks IDE is not possible the vSphere client.
Take a look at KB VMware: conversion of a virtual IDE disk to a virtual SCSI disk to see if this is an option for you.
André
-
I need to reactivate Photoshop CS4 because I have a new hard drive in a reminder for my 2.5 yr old iMac last operating system running. When you open the program, I was told to contact Adobe support and give them an error code: 150:30. Please help with permission. ?
You can repair it yourself. I have a screenshot guide. You use app the Mac Terminal and a python (.py) script that comes with the recovery of the license for the Mac package.
Don't forget to leave a space after typing sudo python and note that your password will not display any points. Simply enter it blind.
Start 11 Message and take your time. It does not work. Layout error 150:30 opening Photoshop cs4 on Macbook Pro
Gene
-
My 9800 (ATT) Simulator now starts in an error "JVM error 104 Eception: ClassCastException.
I used to be able to continue through the mistakes and join the current device, but then he could not connect to the network. Now I can't continue even through mistakes (I'm left with a blank screen of white).
Installation / uninstall did not set.
My other simulators still works fine (9700, 9670, 8530).
Theories? Solutions? Workaround solutions?
Running the clean.bat file located in the Simulator installation directory. Him back to its default state.
-
JVM error 104 Eception: ClassCastException
Hi all
When I run an application on the Simulator, between start-up Simulator displays an error like below...
JVM error 104
Eception: ClassCastException
Why it is so?
Thank you and best regards.
Hi Peter,.
Sorry for the late reply. I just saw your message and tried to run my application after you have cleaned the Simulator. It worked fine for the moment. Actually seeing the (especially this line ReliableTransmissionHelper.
stack trace (ReliableTransmissionListener, String, TransmissionService) line: 105 ), I could not think that cleaning the simulator could be the solution...Thank you very much.
-
JVM error 104 - compiled with 4.2 running on 5.0, 6.0
I have a JVM error 104 during execution of the 5.0 and 6.0 applications that I have compiled under 4.2.
4.2 code works well on all simulators, until and including 4.7
When I compile the code under 5.0, it works fine on the Simulator 5.0 and 6.0.
When I compile the code under 6.0, it works well on Simulator of 6.0.
When I run the code 4.2 in the 6.0 sim, it shows "Eception exception: java.lang.Error.
When I run the code 4.2 on a 6.0 device, it shows "Eception exception: java.lang.NullPointer Exception.
Does anyone know how to track down the error that is in the 4.2 code, so I can run in 5.0 and 6.0? It's really complicated because I do not think I can debug code in the Simulator 6.0 4.2? Does anyone have good ideas?
How resources (RRC/HR) are integrated with an application has changed in version 4.1 or 4.2. I don't remember that from the top of my head, but you can tell by the different .java files that are automatically generated when you build a project with resources.
Support to the 'old way' to store resources was abandoned recently (to reduce the app startup time), which explains the behavior you're seeing.
-
my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?
Have you tried to connect your iPhone to iTunes or the wall charger and let your iPhone for 5-10 minutes to charge its battery?
-
ON PAPER MESSAGEDU MY C510 SAME HP IF THERE IS ENOUGH PAPER IN THE TRAY, PLEASE HELP.
ON PAPER MESSAGEDU MY C510 SAME HP IF THERE IS ENOUGH PAPER IN THE TRAY, PLEASE HELP.
We recommend that you reset your C510 HP first. You can perform the reset by following the steps below:
1. press the "Power button" to activate the product.
2. with the product, unplug the power cord from the back of the product.
3. disconnect the power cord from the wall outlet.
4. wait at least 15 seconds.
5. plug the power cord into the wall jack.
6. reconnect the power cord to the back of the product.
7. If the product does not light by itself, press the Power button to turn it on.
Once done, print a self-test report by following the next steps:
1 load plain white paper in the input tray.
2. from the home screen on the control panel of the product, click "Menu" on the upper left side. A list of menu options screens. 3. click on "Settings" and then click on 'tools '. The maintenance of the printer menu displays.
4. in the maintenance of the printer menu, click "Printer Status Report". The product prints the report.
If the report is printed correctly, try again to print your original document.
If the problem persists, you may need to check the status of documents in the status bar. To do this, follow these steps:
1. remove the stack of paper from the status bar.
2. check that the obstacles within the status bar. A flashlight to view the mechanism inside the status bar to make sure that nothing is blocking the paper to engage with the rollers. Even small pieces of paper can cause paper feeding problems. (Important: If any obstruction is detected in the paper path, you need to refer to "Cleaning the rollers" segment at http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c02248120-20%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken)
3. to review the status of the paper and then replace any paper torn, dusty, curled, wrinkled, or bent.
4. ensure that all the papers in the stack are the same size and type. Never charge which coexist types of paper in the tray. The product can only process one type of paper at a time.
5. press on the stack of paper on a flat surface to align the edges.
6. make sure that the paper stack does not contain less than 10 and not more than 25 sheets paper.
(Note: the limitation of the number of documents applies only during the phase of solving problems.) Once the problem is resolved, you can load the tray to its original capacity).
Once you have checked the status of documents, reload the tray in the following way:
1. lift output in open position and open the door of the feeder.
2. slide the width guide to its outermost position paper.
3. Insert the stack of paper into the paper tray with the short edge forward and the print down side.
4. adjust the paper width guide so that it rests against the stack of paper.
5. lower the output tray, and then close the tray door. Once this is done, print again an automatic test report by following the above steps. If this too does not resolve the issue, refer to some more solutions at HP support center link below: http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c02248120-20%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken
GuruAid.com
-
When trying to download pictures fron sd card I get an error code: 0 x 80010108 please help
When I try to download pictures from an sd card I get error code: 0 x 80010108 please help
Using Windows Live Photo Gallery?
Others have reported success with this error code by installing this: http://www.microsoft.com/download/en/details.aspx?id=26829
-
Windows 95 CD-CD-ROM-game Need for DCC Speed-No. pieces found - can not install the game - please help.
------------------
-
put an item into the basket, made an empty recycle bin, need return the item, please help, I did nothing since the drain, so the machine is in the same condition as when I emptied
If you have xp, you can do system restore
-
Lightroom has ceased to function and be cut during use, update wouldn't download through app cc, direct download, moved his record saying is corrupted, im losing the battle please help
reset your preferences -: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
If this fails, uninstall and reinstall
-
Iendupwithsentaceslikethis - I have reset the mac, but it is always the case please help!
Latest version CC
Richard
Solved the problem - I just changed a Chinese document. I copied the milling guide in a new document.
-
I bought a single image, and after downloading my image always has the watermark please help.
Please follow the following steps
Maybe you are looking for
-
Re: Satellite A500-14F (PSAM3E) Windows 7 drivers
Hi allI have a Satellite A500-14F (PSAM3E) and I would like to install Windows 7, but I saw on the site of drivers in the European Union for Portege. By any chance does anyone know where when Win7 drivers for all other portable eligible will be publi
-
5 gmail app is not supported Exchange
Hi motorcycle healthcare team Today my gmail application got upated to Gmail 5 in my e bike, thanks for the update, but it has no mail Exchange supports, which is the characteristic highlighted in this update, as mentioned in the playstore. So why it
-
Pavillion 1118tx g6: wifi drivers
I want to download drivers for the wifi connection, but there are a lot of drivers on hp page.which driver should I download so wifi gets working? product name: pavillion g6 1118-Texas. Help, please.
-
How to reinstall Windows 7 Starter free...
I got Windows 7 Starter pre-loaded in my hp netbook when I bought it, as I remember I have gave me a product key I can find now is no more. I accidentally uninstalled the Windows 7 starter pack and now don't know how to get it back. As I can not open
-
Ask to install or assign the certificate on the 2013 Lync Server default
Hi, I'm in the middle of installing Lync Server 2013 and is stuck on the process "Request, install or assign the certificate on the Lync Server default 2013". Whenever I get this error... > Assign the certificate Game-CSCertificate-Type by default,