K1 Tablet freezes when turned on

When I turn on my tablet or freezes at startup screen Lenovo swirling circles or he keeps just reading. It is not detected via USB when connected to the computer.

Is there a way to fix this?

That would be classified as software or hardware warranty? I found that the software warranty is only 90 days? but could not find anything on a guarantee on the hardware?

If I can't get it repaired it is garbage?

http://forums.Lenovo.com/T5/IdeaPad-IdeaTab-Slate-tablets/K1-stock-ROM-120109-bootloader-fix/TD-p/71...

Tags: Lenovo Tablets

Similar Questions

  • Multicamera freezes when turned on

    In first Pro CC 2015.2 (9.2.0), I have three files (ProRes 422) .mov and I used the front of Muli-cam feature with 2 ProRes files, but now I have 3 in my multi-cam (with two active audio tracks).  When I take the sequence and it nests in the multi-cam sequence, activate multicam on the nested sequence, and then change the program to a multi-cam monitor monitor, the program freezes completely and doesn't let me do anything.  I have to force-close and re - start to recover first, but whenever I try to use multi-cam, it freezes completely.  I tried to clear my cache, restart the program by restarting the computer around and even taking on the audio.  None of this helped, and I couldn't find anything else online that had a similar problem.  I suspect that it is perhaps too video (ProRes) for my Mac to manage and I'm going to try to convert to mp4 with a lower data rate, during the night and then try again, but I was wondering if it was another question and if someone else has this problem.

    I use a Mac Pro 2013 with these specs:

    Mac Pro (end 2013)

    Processor: 3.5 GHz 6-Core Intel Xeon E5

    Memory: 64 GB 1866 MHz DDR3 ECC

    Graphics card: AMD over-pants D700 6144 MB

    Oh, I fixed it...   In case someone else has a similar problem, I was creating a stereo submix track and sending my master audio track in my initial (nested) sequence and first was not very happy I did that.  So instead, I deleted the audio submix track and everything works now.  It didn't really matter because the nesting sequence actually creates its own submix.   So it's good.

  • freezes when turned on

    The tungsten e2 freezes goes to the tab preferences with place, date and time. It then freezes on this screen. Soft reset does not help. Any thoughts on how to solve this problem?

    Hard reset to clear the machine and start from scratch.  I hope you have done regular HotSyncs as recommended so that your data can be restored.

    To perform a hard reset: (Palm Knowledgebase article #887)

    By now the power down button, press on and release the Reset button on the back and continue to press the Power button. When the gray Palm logo is displayed, you can release the Power button.

    You should now see the warning in 5 languages page. Press the direction upward on the 5-way keypad to perform the task. The Palm restarts several times as it re - install the original programs and erases all data from your previous.

    WyreNut

  • 6 iPhone with iOS 9.2 does not and freezing when I try to turn on + WiFi freezes

    6 iPhone with iOS 9.2 does not and freezing when I try to turn on + WiFi freezes cannot allow him. (When I get to start the Iphone by pluging it to Itunes)

    I've done a new install and reset the network settings.

    But always the same questions

    Thanks a lot for your help

    I have the same questions and more from Friday December 11 when I've upgraded to iOS 9.2.

    Device: iPhone 5 s

    Problems:

    -Screen freezes randomly reboot * required (sometimes restart by the camera itself)

    -Sometimes device reacts very slowly on the command (or even then restarts)

    -For the most part within the first hour when used, sometimes immediately (after restart)

    -Cannot slide or apps to react when I touch

    -AssitiveTouch on, keep available however to move and opening, but no order accepted when the screen is in gel

    Resolution of problems so far:

    -Reset all settings (no result)

    -Backup on iTunes (11 dec)

    -Erase content and settings and restore the backup to iCloud (10 Dec *) (no result)

    -Erase content and settings and restore the backup of iTunes (11 dec) (no result)

    -Tried with the new iPhone camera 6 and restore backup icloud (unsuccessfully; restore hangs at "1 minute remaining")

    -Tried with the new iPhone camera 6 and restore backup of iTunes (no result: same freezing questions reappear)

    Conclusion date: is not a hardware problem (device), but one software: combination of the configuration (such as backup) and the new iOS 9.2.

    By the way: I guess that not possible to restore 9.1 on the device.

    The new iPhone 6 initially contained iOS 9.1, but then did not 'see' backups, because they were made from a 9.2 iOS device.

    So I had to first install the iPhone 6 as a new iPhone, upgrade to iOS 9.2 and then I was able to reset and restore the backup (with no good result, as described above).

    *) restarts: hold Home-button on/off-button simultaneously for 10 seconds

    backup *) in the form of clouds 10 Dec worked without problem on iOS 9.1.

    I will continue to investigate on removing the apps installed a year or two, see if that generates the result.

  • PC freezes when other electrical appliances are turned on (lights, refrigerator, etc.).

    Original title: my pc freezes when I put lamps on .or even sigh fridge light. Please help

    my pc freezes when I put lamps sigh on .or same fridge lights. or plug the speaker. Help, please

    It sounds like you need to get a power line conditioner, or perhaps should move from power supply cable from the PC to a different circuit (a non-shared with lights fridge or store). You may move the PC.

  • Satellite Pro A300 freezes when on the internet

    Satellite Pro A300 freezes when on the internet & the only way to turn it off is to take out the battery. Bought new Dec 2010 & is under warranty - suggestions?

    Hello

    have you tried to update drivers Lan (wlan)? What browser do you use? I guess, the Internet explorer, try firefox or opera. Also, your computer may be infected with the virus, or blocked by the firewall. Have you installed software before it starts? Is this ok when you bought it? I ask you too, because you do not have a lot of information.
    It is especially the driver, software problem.

  • Sansa freezes when the memory card is inserted

    I have a 8 GB sansa, the other day I bought a 32 GB Micro SD card but my rocket freezes when I put the memory card if it is already turned on. If it is off, I put the card & turn it on, I can't go past the screen of welcome without it freezing. Any suggestions?

    Where did you got the MicroSD card to? If it is on ebay, you are sure that it is really a 32 GB card? How much did you pay for this? If you have paid for a really cheap price, almost-too-good-to-be-true, then you probably have a fake. Many people have been scammed lately because of this.

    Too good-to-be-true is nothing less than $80 (like around $40). I paid $40 for my 16 gb, so if you find a 32 GB for this amount, it is definitely a scam.

  • my lap top keeps freezing when I'm with her

    my lap top freezes when I'm using facebook.

    my lap top jumps from one page to another, when I'm with her or crashes

    I have lost confidence in the top of the tower because he does not follow instructions

    Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

    -

    Microsoft has suggestions and offerings to

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

    -

    Moderator Forum Keith has a few suggestions along this line to

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

    -

    If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

    -

    You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

    -

    Finally if all else fails, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

    `

    When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.

    -

    I hope this helps. Good luck.

  • The mouse freezes when I type

    My mouse hair computers when I type, I would like to know how to disable what I can return to the game without using an external mouse. I know that's not a mistake.

    IM using a Compaq Presario CQ57
    Synaptics Touchpad on PS/2 Port V7.5
    Will you please tell me how to turn off with precision, so I can type and move my mouse at the same time.
    The above can help you.
    See you soon,.
    Jerry
  • laptop freezes when performing automatic maintenance

    My sony vaio SVE15137CGW (Windows 8) started to freeze when the automatic Maintenance starts (after staying idle for a few minutes). A black clock appears on the task bar, so I know that the service is running. I can market to stop the gel which is a real nuisance.

    What could cause this problem and how can I solve this problem? How can I disable the automatic maintenance until I solved the problem? I followed the instructions on the Web page below, but the interview turned on even once after a reboot:

    Hello

    Automatic maintenance facilitates efficiency slowed and allows the activity to execute in a timely and prioritized way. So, the event that is configured to run will begin when the previously described (defined by default at 02:00 every day).

    the default configuration from the active automatic maintenance should do no harm at all. However, personal computers are not always lit, and nor are they heavily loaded by processes or data. Therefore, it is recommended to disable the automatic maintenance in personal computers to avoid the processing overhead.

    After the automatic maintenance turned off, you can manually optimize your PC by manually initializing the command CHKDSK of disk defragmentation, etc..

    You can check the link to find out how to disable the automatic Maintenance using Task Scheduler tasks:

    Refer to the suggestion which is marked as an answer:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/Windows-81-freezes-when-automatic-maintenance/fece2a5a-855C-4430-9521-a7ec666d61ff

    If you do not find the same performance after you disable the automatic Maintenance, reactivate tasks.

    Check out the link for more details:

    http://msdn.Microsoft.com/en-us/library/Windows/desktop/jj835985 (v = vs. 85) .aspx

    Please let us know if the problem still persists.

  • Timeline freezes when I try to drag media

    Hello, I started just recently having a problem with a project where the timeline will freeze when I try to drag the media tray or Windows Explorer. I can always zoom in and out with the wheel on the timeline, but the media itself and all the buttons are not able to be selected. This does not happen with my other projects. I've only worked with this project for about 3 hours before the problem started happening.

    I just want you to know I had a discussion with the support staff and they gave a quick and the response of the effect. turn off the markers in the timeline so far was the fix. don't know why it is an issue all of a sudden, as this can be problematic if people use markers intensively, because I only really use them as a substitute for the 'work area bar' to specify my encode times.

    Hope this helps

  • Illustrator keeps freezing when I open a new document. I just got this program.

    Everytime I open Illustrator it keep freezing when I try to open a document. I downloaded it today and did a reboot.

    I fixed it!

    Anyone else having this problem, try and turn off the performance of your GPU.

  • Why TB does not freeze when I click on account settings? (Goes from bad to worse!)

    A few days ago, I posted a question about migration backup emails in TB. I got help, but not a definitive answer to my problems. Unfortunately, my wife and I seem to have created an additional problem which must be resolved before we return to the issue of migration of file. Now, TB freezes when I try to check the settings of an account. This may be due to our attempt to copy an old e-mail folder (file .sbd), in my current profile. That's how it happened:

    We copied a saved .sbd folder to
    C:\Users\FF\AppData\Roaming\Thunderbird\Profiles\pnp8j2nf.default\Mail\Local records
    We have not seen any change in TB.

    Then, in TB, we created a folder under local folders, giving it the same name as the .sbd that we had copied. The content become so visible in TB.

    When I tried to check the settings of an account, TB has frozen. Restart TB did not help. Then we tried to go back to our previous steps by deleting the folder newly created in TB and .sbd file in local folders. I restarted TB and PC, but TB still freezes when we try to check the account settings.

    Think that we could have corrupted profile, we also renamed the 8 character profiles .default under C:\Users\FrankF\AppData\Local\Thunderbird\Profiles and C:\Users\FrankF\AppData\Roaming\Thunderbird\Profiles, hoping TB would generate a new profile, but now the TB does not start without the profile.

    We wonder if we should remove profiles.ini or remove its contents to force TB to create a new profile. Any advice on which are originally the gel and how to fix? Thanks in advance.

    Apparent victory! I copied my saved files (trrevilc.default) to

    C:\Users\FF\AppData\Roaming\Thunderbird\Profiles and edited profiles.ini, changing -
    

    [Agroalimentaire1]
    Name =TB difficulty
    IsRelative = 1
    Path = Profiles /kdtnv197. Fix TB
    Default = 1

    TO

    [Agroalimentaire1]
    Name =PlanetXP
    IsRelative = 1
    Path = Profiles /trrevilc.default
    Default = 1

    and Voila! my darlings old emails and accounts reappeared... even though I have an e-mail account w a problem.

    I'm still wondering (after I backup C:\Users\FF) the best way to remove the other profiles. Suggestions would be appreciated. Thanks again.

  • Firefox crashes when loading websites, freezes when I try to download any file and completely freezes when I try to access the Options menu. Help!

    As he says, I had a difficult time with Firefox lately, and I think that it's corrupted. I tweaked the settings according to the suggestions on this forum and others like him, but they made the problem worse. I've updated to the latest version of the browser that has not helped, and I finally tried the "Reset Firefox" button, which was worse than anything. I lost my custom settings and Add-ons for nothing, the problem persists.

    More frustrating is that it completely crashes whenever I click on tools > Options, so I'm not able to make changes to this new configuration. If I export my favorites safely, I will try to uninstall the browser and re - install an older version of it, but of course it now freezes when I try to export the bookmarks file.

    Thus, apart from trashing it and starting over... any suggestions?

    For the record, it's Firefox 28.0 (do not know what version it was the beginning of the sentence), and the window "On Firefox" said that it is up-to-date. I am running Windows XP.

    Thanks for any help or enlightenment, you might be able to provide.

    Hello

    Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

    Note: You can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:

        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    More information on the resettlement of Firefox can be found here.

    WARNING: Uninstaller or the use of Firefox and not run a third remover as part of this process, because who could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. These can be recovered, unless they have been backed up on an external device!

    Please report back to see if this helped you!

    Thank you.

  • Why my game Center freezes when I go by parameters or directly by clicking on the center of games? Can I know which method is the best to use to solve this problem? Also, I use an iPhone 6 s, iOS 9.3.1

    Why my game Center freezes when I go by parameters or directly by clicking on the center of games? Can I know which method is the best to use to solve this problem? Also, I use an iPhone 6 s, iOS 9.3.1

    Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the call logo comes back again?

    You won't lose data, but it can cure a few glitches.

    If this does not work, the initial Setup would be the next step:

    Use iTunes to restore your device to factory settings - Support Apple iOS

Maybe you are looking for