K132 universal connector.

Similar Questions

• Satellite Pro L20 - replacing the screen

  Hello

  I have a Toshiba Satellite Pro L20 and it has a cracked screen.

  Can I put any brand screen inside? Or should it be a special type?

  It's a 15-inch screen, so as long as I don't have the same size, it should go all right in I guess.

  Any help would be good.

  Hello

  I'm no technician but and I don't know if all the screens have a universal connector. So if possible try to visualize for laptop L20 to ensure the connector will be the right one.
  On eBay you can find many parts for Toshiba laptop, so check it out. With a little luck, you can find cheap display there.

• Typical range of 5 GHz?

  Hello

  I have a question about the typical range for the GH 5 band.

  I have a router dual-band of EA3500 and a WES610N dual-band universal connector of media spaced 30 feet apart - the router is on the second floor, the media connector is on the first floor.

  All the floors are wood frame (no framing of concrete or metal).

  I know that I have no problems with the 5 GHz signal, however, it seems that the Media connector uses the 2.4 GHz band.

  Any suggestions?

  Thank you

  Bill

  I agree with with 5 GHz band Saber-toothed. In order to use the 5 GHz range, I recommend placing the WES610n 15 feet to 20 feet away from the router. You can use for the channel width of 40 Mhz and 149 for the channel on your router wireless. This wireless configuration works for me.

  For the WES610N, simply use static IP for it and manually enter settings wireless on the configuration of the gateway to entertainment page. 5 GHz is ideal for heavy network like video streaming, online games and download.

  I hope this info helps

• Connection to the 4G hotspot for cell phone WUMC710?

  I'm trying to connect my WRT1900ACS router to my Verizon 4 G hotspot on my cell phone for internet connectivity.

  I bought a pious WUMC710 universal connector of media, he could hang on to my hotspot and I could plug it into the internet port on my router to provide internet connectivity to the router.

  Buy the right device?

  I can't find hotspot from my phone from the configuration of the WUMC710 screens (I tried both entering my info hotspot or scanning of a signal).  He sees my router wireless signal, but not the hotspot of the phone signal.

  Can I connect my PC (and other devices) to hotspot from my phone, so I know it works.

  Thank you!

  Hotspot of your phone may be not broadcast a frequency of 5 GHz network. This could be a reason why it was not detected because the WUMC710 repeat that network frequency of 5 GHz. For the WAP300N, it can run some programs that support 2.4 and 5 GHz bands. However, the ideal configuration for our routers is hooked up to a modem for a more reliable and stable connection. It may be preferable to have an Internet subscription for your desired configuration to work effectively.

• Where can I get a Power Mac Quicksilver monitor connector?

  I withdrew my Power Mac G4 (Quicksilver?) in 2010 in favour or an IMac 27 ".  Now after having sitting in storage for years, I plug it into my IMac as an external hard drive to wipe and move.  I did not set the monitor and cable connection for some reason any.  Any ideas where I can get a cable RGB for this G4?  I can't find one online.

  Thank you.

  Gina

  Unfortunately say 27 "iMac don't tell me much about the model and its capabilities unless I have spend five minutes of research on iMac models.  Ideally, all you need to do is to put the computer in target disk Mode and attach it to a compatible computer, this way to get access to the drive, no monitor required.

  How to use FireWire disk mode target - http://support.apple.com/kb/HT1661 - includes a description of the hardware and software configurations.

  Most of the other ways I know attaching require the Quicksilver be started on the drive in which case it won't let you erase the drive.

  Another way is to remove the drive completely then buy one of these things in setting $30 naked reader with connector IDA / ATA and use it as an external drive.  I have a NewerTechnology universal drive adapter that performs the 3.5 "and 2.5" SATA and SATA drives.

• Universal adapter for Satellite C850/02D

  I do not know much about electronics. I wonder if the I bought the universal adapter is compatible with my laptop

  My Toshiba adapter has input 100-240 V ~1.5A. Output 19V - 3. 95A.

  Only 1 connector of the universal adapter pack I bought inserts in my computer. When I insert this into the adapter power cord, it shows the output voltage of 15.0.

  Thanks for any help

  Hello

  The value of the voltage V is very important.
  You cannot use a 15V AC adapter if your original adapter 19V.

  A ampere value may be a little different, but not too low.

  However, the use of non-original parts is always a bit risky, and in my opinion, you can buy a compatible adapter and original for your laptop model. Usually the original adapter should provide a part number that you could use to google for some online resellers providing this part

• Rear connector of the SCXI-1520 module as input?

  Good morning,
  
  Regarding connectors on the SCXI-1520, is it possible to use the rear connector as a 68-pin input (instead of an output)? 
  
  I have the following hardware and wanted to know if it's feasible to pipe a signal from an SC-2345 to a PC through the path below.
  
  NI SC-2345 (Signal Cond. Block)  --> NI SCXI 1520 (Universal Strain/Bridge) via 68-pin cable   -->  NI SCXI 1600 (USB Digitizer Card) --> PC
  
  Thanks
     
  

  Hello hma1,

  Unfortunately, you will not be able to do.  The only "entry" would be taken in chassis cascading signals.

• vWorkspace 8.6.1 connector self-configuring config.xml

  We have just upgraded to the server vWorkspace v8.6.1. When we used 8.0.1, we had connectors 8.0.1 windows that would automatically get "'vworkspace.somedomain/config.xml ' and automatically configure the VDI settings clients." I've updated the client to v8.6.309.4062 and this time I'm just introduced to enter 'Web site or e-mail address' in the text box. Here, at the University, we loved this feature because it that VDI has been automatically configured and students do not have to enter the URL. Who feature has been removed from this version?

  Hello

  I believe it has been deleted, but several alternatives have been introduced.

  I know that the reg key to set the path always exists HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Provision Networks\Provision - Client\AutoConnectURL IT and still works with this version of vWorkspace.

  This is a string value that contains the path to your broker (if you use the new connector management functionality) or to your file config.xml if you use the old style.

  With the new direction of connector, the intention was to make it easier for new users. Everything they need to do is go to a (properly configured) Web site and it will install the connector for them and configure it automatically.

  If you don't want to use this option, you can either 1, use the URL of automatic connection mentioned above. 2, teach them the URL to download the config 3, create a DNS entry to use the E-mail address configuration option.

  Thank you, Andrew.

• Copy of the hard drive. Where can I get an "edge" 44 HARD drive to a connector 44 flat plug adapter round pins?

  Hello. Anyone know how to copy the contents of a hard drive of 80 GB MK8026GAX Toshiba HDD2191 d ZK01 T to a computer? This record came from a laptop Dell Insipiron PP12L defective 6000. The HARD drive has a 44 pins connector flat male edge. I can't find any adapter that will connect this edge connector 44 flat pins at all normally used 2.5 "or 3.5" round connector pins. I have a new technology USB 3.0 Universal Drive Adapter kit, but it requires 44 pin round connector.

  If you know an adapter that can connect edge connector 44 pine flat female to connector 44-pin round, please let me know.

  My approach to copy HDD content is incorrect. Maybe you have a suggestion for a way to copy the contents of the HARD drive above?

  Thank you in advance,

  AdamWie

  Hi Osprey4,

  Thank you for your response. I found an adapter that transforms the connector 44 flat pins female connector 44 round pins. The only thing to do now is to get 44 male connector 44 round pins round pin connector cable or adapter, but this should be easy. Thank you for helping me to solve my problem of HARD drive.

  Kind regards

  Adam

• The upgrade GPU and PSU for Optiplex 9020, baffled by connector 8 pins. !!!

  Hi, I have a game related question if you want.

  I recently acquired a brand new 9020, was surprised by the performance and was eagerly expected put in my old Redeon HD 5770. However, I was faced with the question of the connectors on the motherbioard is unfamiliar and non-standard. My old SPU 650w had a 4 pins of connector 8 pin, just like your stupid mothers, but they don't reach. The expected 20 "-24"-pin connectors were nowhere to be seen, so I couldn't use these either. " I just talk about an oversight and that my diet Huntkey Titan 650 has simply need an extension lead to join the mother socket, or I'm screwed? The PC was bought for me by my University, and I didn't have the choice of the plug.

  Best

  Fulmar

  Dell isn't the only one to do that.  HP also does.  Its likely a response to the power supplies being exchanged with units of counterfeits.

  The adapter looks interesting.

  http://www.moddiy.com/products/Dell-OptiPlex-3020-PSU-main-power-24%252dPin-to-8%252dPin-adapter-cable-%2830cm%29.html

  Dell OptiPlex 3020 main PSU to power 24 pin to 8 pin adapter cable.

  Suitable for Dell OptiPlex 3020 / 7020 / 9020 / T1700

  Seems to be using the gray PWR, 3 son of black earth, Green power supply wire, 2-wire 12V of the axis to 24 and 1 wire to a molex power connection 12v.

  This means I can hack me a plant power supply using the power cable original and some tubing and solder.

  

  

  

• is the AC adapter for example 463958-001 for compaq cq60 equipped with an output connector dual voltage?

  is the AC adapter for example 463958-001 for compaq cq60 equipped with an output connector dual voltage? So I can't use the universal ac connectors?

  Your laptop will accept universal power adaptors, you just want just to make sure it's a 65-W AC adapter.

  The specifications of your laptop can be found here: http://goo.gl/b0r0r

• Universal SE Clipboard and iPhone

  Universal Clipboard will work between a MBP of the retina and an iPhone SE?

  Hello curly1,.

  Thank you for using communities of Apple Support. It is my understanding that you want to use the universal Clipboard between your MacBook Pro and the iPhone OS. This is a great feature. I'm happy to help you.
  

  Universal Clipboard

  Universal Clipboard works with these devices and operating systems:

  iOS 10	macOS Sierra
  iPhone 5 or newer iPad Pro iPad (4th generation) iPad Air or newer Mini iPad 2 or newer iPod touch (6th generation) or newer	MacBook (early 2015 or newer) MacBook Pro (2012 or newer) MacBook Air (2012 or newer) Mac mini (2012 or newer) iMac (2012 or newer) Mac Pro (end 2013)

  Requirements for continuity on Mac, iPhone, iPad, iPod touch and Apple Watch

  Have an amazing day!

• Universal Clipboard

  I'm doomed if I can find step by step instructions to use this feature, if Im turning to you guys!

  Can someone help me? Thank you

  http://www.IMore.com/how-use-universal-Clipboard-MacOS-Sierra

• iCloud: 2 universe for 2 users on 1 mac (sierra)

  My husband and I share a PowerMac. We each have our own iPhone and iPad. We each have a distinct Apple ID, account and storage iCloud plans.  We want that our a PowerMac to support our two Apple ID iCloud/two distinct worlds. In this way, certain content on our mac, accessed by 1 Apple ID user and reader iCloud is related to and can be synchronized with user 1 Apple mobile devices. And content accessed with 2 Apple ID user and reader iCloud is related to and can be synchronized with user 2 Apple mobile devices. Basically, I don't want some of his stuff on my devices, and he doesn't want that some of my stuff on their devices. I mean, by substance, music, books, photos, videos, e-mails, messages, same brand-pages and playlists. We would like to share some information on the mac, like contacts, passwords (keychain?), calendar, a few photos, files and business-related content. Most of the music library (which he doesn't) is saved on separate disk.

  When I tried to sync my iPad with our mac, iCloud account seemed to be at the top of the hierarchy on the mac. I was asked to sign to her iCloud account and sign in mine. But when I signed on my iCloud account, I saw the message that I am already connected to my iCloud account. This caused his e-mail on the mac to disappear as well as everything else under his iCloud account.  Family sharing with the iCloud parameter does not provide the solution because it also requires a primary account (the Organizer). We want to separate but equal iCloud universe on mac.  Any suggestions?

  As far as I know, what you're describing or thinking of doing is a nightmare, and I don't think it's possible, i.e. some of your data on its account and vice versa.

• How to configure universal Clipboard

  Members of the Community dear apple:

  I've recently updated to ios10 and mac os x Sierra and I want to know how to execute the function universal Clipboard on my mac and iphone

  Thank you

  Hello!

  I found a good article for this: macOS Sierra: copy and paste between devices

  Thank you!