K5 Lenovo VIBE Plus 3 GB OTA update fails

Hi all

I followed all the posts on this issue for the past two days. First of all Lenovo Assistant smart giving a screen empty, so I can't check the updates through my pc. I tried to download the update in mobile and then used 'Bad' backup file ' / data/data/com.lenovo.ota '. I extract a zip file (named random) this backup who was about 60 MB and then had India.ota.zip and System.zip. Then stick the two of them in the memory of the phone and started to blink.

India.OTA.zip worked normally and my laptop restarted after that. But when flashing with System.zip, I have this error

«MEM: / dev/block/bootdevice/by-name/aboot:...» "contained unexpected."

E: error in /data/media/System.zip (Status 7)

Concerning

It helped me, even though my background was not as easy as mentioned. First thing was to Flash my mobile to S042, then following the above steps.

The point is if someone gets 101 State or error Status 7 this is because some features of the OTA update does not match the system. So, you need Flash mobile at least once. The process is very simple and takes only 15 minutes.

Tags: Lenovo Phones

Similar Questions

  • A6020a46 / 3GB Snapdragon 616-indian OTA update failed (unroot)

    Hey guys, today I check an update for my lenovo Vibe K5 more A6020a46 3 GB variant, I download the update of its 56 MB in size, then restarted to tbrough update flash Recovery but by updating suddenly device rebooted to normal with update failed message, I thought that some problems in school so I factory reset my device and then download and tried , but facing the same error.  I try to manually download the fiemware stock and update complete pc, with the help of lenovo support, choose the model and code hw to custom firmware they provide and who are 1.6 GB in size, but then I start download after loading MEM and xmls he show any failed download is peripheral fyn detected in downloader, but don't start not flash?  Help me please.

    Hey guys got solution for problem of OTA update no matter what version you are and get you the update issue it works for all OTA on Vibe K5 / K5 more.

    Steps: -.
    1. download Lenovo Assistant
    2 connect your device with pc as usb debugging must be on with unlocking OEM is also on
    3 Lenovo Wizard detect your device and the last OTA to your device as well. good download it.
    4. after the download finish it will try to flash your device with the latest OTA but unfortunately it failed with the error. (relax_)
    5. open C:/ProgramFiles/LenovoMobileAssistant/folder on your computer now, go to the plugins folder there u got
    Update.zip, copy it and paste it somewere now extract it.
    6. you got several zip with find country_name.zip 'India.ota.zip' files and 'System.zip' copy this two in your SD camera card.
    7 reboot to recovery and first flash India.ota.zip using inventories, it will automatically restart.
    8. new reboot to recovery and now System.zip flash finally it starts to blink.

    Note:-it will work only and only if you have not installed the CWM/TWRP/Phiz recovery on your device. as TWRP flashed so I can't but after restoring the firmware stock S042 I resolved the number using this way.

    Oh yes m on A6020a46_S056 and the heating problem is resolved almost not at all same heat during a heavy games, did not notice another change log.

  • Reference Dell come 8 7840. OTA update fails

    Android Version 5.0.2

    All, I have 8 came.  The update downloads, looks like it's install, but it still fails.  No real reason is given.  I just geth OTA update has failed.

    Any ideas why this happens?

    One thing that I would advise checking storage. I have this tablet, experienced similar problems. I would recommend clear up about 25% of the space and try again. Frankly, the android update think he needs more space than there really. You will have the space remaining after the update, but it must be clear beforehand.

  • Software Lenovo Vibe X 3 BUG in update (317 mb)

    Hi Lenovo I use Vibe X 3 for 25 days, and it's mobile exllent until I started to date of 27/02/2016 317 MB, this update has a bug in the display of the color Balance settings there no setting applied in balance of display color mods and sound audio on stereo speakers is also please change out a fix for Dolby and display bug as soon as POSSIBLE.


  • Yoga 10 (b8000) OTA update fail (default tone for calls)

    Hello

    My tablet of Yoga is updated to 4.4.2.

    Today I opened the settings to see if there is some updating to do, and under the first line of the menu it is this frase (translation Italian fom):

    system update

    set the default ringtone for calls

    If I tap on that voice, said the next screen:

    unknown error. Server might not be available

    could you help me?

    What is the type of default ringtone for calls?

    Solved by myself: it was enough to enable developer mode

  • Update of Marshmallow for Lenovo Vibe P1

    Hello guys,.

    Am from the India. I recently bought "Lenovo Vibe P1" Smartphone. It comes with Android 5.1 Lollypop, what will be the next update to the marshmallow? I see that Lenovo Vibe P1 is expected for the marshmallow.

    Any update on that?


  • Lenovo vibe z can be updated in 4.4?

    Hello

    Lenovo vibe z can refresh in 4.4 android

    Yes, currently we test 4.4, you'll soon

  • Atmosphere X 3 MarshMalllow over the OTA update

    Hello

    To date(25-aug-2016), I'm never received no update Marshmallow for my Vibe X 3 on OTA. Even manually checked for update. But it says that the system has the latest update. An idea that I will get this update? Or do I have to update my firmware to get this update... Is stiil the update is available on the OTA?

    There are a few bugs in the update of the marshmallow... Maybe they froze OTA... I see x 3 last Marshmallow updated developer preview assumes that Lenovo working on it... Please do not upgrade to Marshmallow... Lollipop is very good on vibe x 3 as if now

  • Lenovo Vibe Z2 Pro stuck at splash screen

    Hello

    I have the Vibe Z2 Pro and have the version of LINE of 271. Today, I got the OTA update message and tried to install the S277 update. But I wasn't able to do. So I phone reset and now phone is not booting. It stucks at Lenovo screen logo and nothing happens. I did the factory also resent by presseing low volume + powere but no help.

    Please help me to restore the phone. As in samsung phones, there are mode of odin. Is something like this for lenovo. ??

    Earlier, I rooted my phone and installed TWRP recovery. Then S277 update I removed the roots and tried to install the udate, but it failed. Please help me.

    Kind regards

    Mandar

    Hi guys,.

    I have soved that problem using Qualcomm Flash image program loader (QIFL). Its pretty simple. I had the original ROM and follow-up instruction as per

    http://www.androidbrick.com/ultimate-Qualcomm-Snapdragon-unbrick-guide-Snapdragons-are-unbrickable-q...

    This guide is the base LINE for K920

    I got my phone revives and then updated to the latest version of the LINE-S277. No problems atall.

    Hope it helps you too.

    Kind regards

    Mandar

  • Lenovo Vibe Z K910L change to the runtime of the ART

    My Lenovo Vibe Z runs on official 4.4 Android I got the week update via OTA last. I activated the option developer and changed my duration of Dalvik to ART. The phone has required a restart and everything by restarting, it got stuck at the start-up screen. What should I do to restore my phone?

    Hold the power button to turn off the phone, then hold the power and volume button to enter engineering mode, then choose recovery plant

  • Lenovo Vibe X 2 battery issue

    Dear team, I brought my Lenovo Vibe X 2 before a month. The phone is seen battery issue, he is stuck at a certain level of load and then it does not show the status of drainage. After some time, it displays the message 'Sim Card' unplugged and have turned off. When I put the charger, it will show the '0' of the battery level. Please guide me if the battery needs to be calibrated, also guide me how to calibrate the battery if needed. I saw a user who has the same problem with the same phone, the community replaced his phone soon. If my phone had to be replaced? Please help and guide as soon as possible. Thanks and regards, Mitesh. XXXXXXXX

    Moderator Note: phone removed for the protection of the Member.

    Hi Mitesh,

    Try to clear the phone to 0 and then keep it off. Then plug the AC to load 100 and start the phone. Lets see if this helps to calibrate the battery. If the problem persists then try to run a factory reset. Check also if there is no OTA update.

  • Turbo problems p 1 Lenovo vibe

    I am facing a lot of problems with Lenovo vibe p1 turbo for the last month and half, but still no support received from company 1) during the call, I had frequent breakdown of votes

    (2) frequent network drops

    (3) crash of the Dialer

    (4) many contacts were contacts but can see dialer

    (5) no support of the volte

    (6) the camera quality

    I tried formatting phone twice

    Phone reset but nothing solved my problems

    Contacted the service center they also saying flash software

    Hope Lenovo will solve these problems

    Please support those all these problems

    Hi Josepgreg,

    What version of software is on your phone? (Settings > about phone > the device information > Build number)
    If your phone has an available update, install it.

    Point 1,2,3:
    Generally, the 'network falls' and "telephone-outs" are caused by the SIM, not the phone itself.
    You can try to change the SIM card to your phone service provider.

    Point 4:
    What is common in the contacts, which are not shown? (same source as SIM or Google, etc.)

    Point 5:
    Not a problem, it is not supported right now. (In November, will be just the update which allows VoLTE).

    Point 6:
    Camera phone, it's not the best on the market, it is a mid-range phone.
    You can try another camera since the Google game application, some of them can improve the quality of the images.

  • P1 of Lenovo Vibe (3G does not work, to the connection but very very slow)

    No idea how her figure-out and resolve the cause first Lenovo Vibe P1 3G connection failure / slow connection problem?

    I have 3G plan but not able to use it. WiFi works well, but 3G does not work after update to Marshalmallow.

    I found solutions to the question:
    -If you have problems with network i.e., 3 G/Wi-fi you just need to reset the network settings to (settings > Backup & reset > reset network settings)
    -If you have any problem with other things you have to factory reset your phone after the upgrade Marshalmallow.

  • Lenovo Vibe turned Z90 - 7 International ROMA, Marshmallow 6.0?

    Hi, I recently bought a Shot Z90-7 Vibe. It's a Chinese phone I think and the ROM on it is the Chinese version, I think. I read a little on the installation of a ROM. international ideally I want Marshmallow if possible. The phone works well as it is, but currently it has android 5.0.2 on it and didn't invite an update of the system...

    How is the easiest way to update to a newer version of android and ensure that I am prompted to upgrade to the latest version available? I saw a tutorial, but it's not clear to a novice like me. He mentions something about installing a root not or a version of root... I don't know what this means.

    Here is the tutorial I found.

    https://androidioslovers.WordPress.com/2015/11/13/how-to-root-Lenovo-vibe-shoot-tutorial-download/

    Can someone help make it clearer for me?

    Update: I managed to Flash with the S118 rom, but the instructions then tell me to change the name of the other (S208) zip file and put it on the SD card, etc. I can't get this to work once I am in recovery on the phone mode. It just says: error when I click on Yes to update.

    I noticed massive problems with google services to play. Crashing and slow down just when downloading apps. Unusable. Also now I can't enter this mode where you have FLIGHT + and connect the usb cable. It is supposed to vibrate once and enter a download mode or something. Mine of vibrates twice and starts just the phone. WHAT THE HELL?

  • Lenovo Vibe Shot network problems

    Recently I bought Lenovo Vibe Shot (Z90a40) in India. It is updated latest Android 5.1.1. He continues to lose constanlty network. I use 2 SIM cards, which is GSM (sim 1) and the other is 3G (sim 2). The two network signals are weak and often phones loses network completely. I'm not having similar problem when I put those sims to other phones (2 Zenphone and motorcycle G2). With these phones, the network is always full and I always get a 3G signal. But kick Vibe guard switching between GSM and 3G and intermittanly loses signal. I do not use the coverage or keep any screen.

    The setting I use for sim are:

    SIM 1: GSM only

    SIM 2: Auto WCDMA/GSM.

    I don't have a LTE network at my place.

    Can someone help me please?

    I gave my phone to the local service center. He has not found the reason for the problem though. He said he will replace the motherboard and see if the problem is resolved. Now, I don't know what's next.

Maybe you are looking for

  • Funky problem continuously with a specific application

    This problem could be related to how this app was designed, but I thought someone here might know a hardware fix. Streaming of any application to airports is easy-peasy, but this particular application of the Apple TV streaming is a real struggle - b

  • NoScript 2.1.0.2 causes double hearder more loss of page navigation arrows

    Noscript 2.1.0.2 installation caused a page header double (blue lines with minimize/maximize/output double, X) with a Firefox button and the loss of the page navigation arrows. Disabling Noscript corrects the situation. XP service pack 3 and Forefox

  • Best way to install?

    Asked me to look at an Airport Express which I have no experience on. It is connected to a router ADSL from Sky and they want to use the Airport Express to extend their wireless. I guess you make an ethernet to the router at the most convenient airpo

  • Photosmart C7250 partial reset

    A partial complete after trying to clear an error message... now not print and invite you to memory card.  What file can I download to a memory card to solve the problem. I did it by mistake and I think that is to have a reload of the firmware... whe

  • "This copy of Windows is not genuine" after installing windows skin (transcript)

    So this weekend I spent a few hours to 'customize' my PC. I installed a skin (which I assume is the source of my problem), some tools to change the ORB start and a few other minor aesthetics, I also changed the sounds, but you can do this through the