Yoga 10 (b8000) OTA update fail (default tone for calls)

Similar Questions

• Reference Dell come 8 7840. OTA update fails

  Android Version 5.0.2

  All, I have 8 came.  The update downloads, looks like it's install, but it still fails.  No real reason is given.  I just geth OTA update has failed.

  Any ideas why this happens?

  One thing that I would advise checking storage. I have this tablet, experienced similar problems. I would recommend clear up about 25% of the space and try again. Frankly, the android update think he needs more space than there really. You will have the space remaining after the update, but it must be clear beforehand.

• A6020a46 / 3GB Snapdragon 616-indian OTA update failed (unroot)

  Hey guys, today I check an update for my lenovo Vibe K5 more A6020a46 3 GB variant, I download the update of its 56 MB in size, then restarted to tbrough update flash Recovery but by updating suddenly device rebooted to normal with update failed message, I thought that some problems in school so I factory reset my device and then download and tried , but facing the same error.  I try to manually download the fiemware stock and update complete pc, with the help of lenovo support, choose the model and code hw to custom firmware they provide and who are 1.6 GB in size, but then I start download after loading MEM and xmls he show any failed download is peripheral fyn detected in downloader, but don't start not flash?  Help me please.

  Hey guys got solution for problem of OTA update no matter what version you are and get you the update issue it works for all OTA on Vibe K5 / K5 more.

  Steps: -.
  1. download Lenovo Assistant
  2 connect your device with pc as usb debugging must be on with unlocking OEM is also on
  3 Lenovo Wizard detect your device and the last OTA to your device as well. good download it.
  4. after the download finish it will try to flash your device with the latest OTA but unfortunately it failed with the error. (relax_)
  5. open C:/ProgramFiles/LenovoMobileAssistant/folder on your computer now, go to the plugins folder there u got
  Update.zip, copy it and paste it somewere now extract it.
  6. you got several zip with find country_name.zip 'India.ota.zip' files and 'System.zip' copy this two in your SD camera card.
  7 reboot to recovery and first flash India.ota.zip using inventories, it will automatically restart.
  8. new reboot to recovery and now System.zip flash finally it starts to blink.

  Note:-it will work only and only if you have not installed the CWM/TWRP/Phiz recovery on your device. as TWRP flashed so I can't but after restoring the firmware stock S042 I resolved the number using this way.

  Oh yes m on A6020a46_S056 and the heating problem is resolved almost not at all same heat during a heavy games, did not notice another change log.

• K5 Lenovo VIBE Plus 3 GB OTA update fails

  Hi all

  I followed all the posts on this issue for the past two days. First of all Lenovo Assistant smart giving a screen empty, so I can't check the updates through my pc. I tried to download the update in mobile and then used 'Bad' backup file ' / data/data/com.lenovo.ota '. I extract a zip file (named random) this backup who was about 60 MB and then had India.ota.zip and System.zip. Then stick the two of them in the memory of the phone and started to blink.

  India.OTA.zip worked normally and my laptop restarted after that. But when flashing with System.zip, I have this error

  «MEM: / dev/block/bootdevice/by-name/aboot:...» "contained unexpected."

  E: error in /data/media/System.zip (Status 7)

  Concerning

  It helped me, even though my background was not as easy as mentioned. First thing was to Flash my mobile to S042, then following the above steps.

  The point is if someone gets 101 State or error Status 7 this is because some features of the OTA update does not match the system. So, you need Flash mobile at least once. The process is very simple and takes only 15 minutes.

• Windows Update fails to check for updates on Windows 7 Ultimate 64 bit.

  Windows update fails with error code "c80003fa" or full "0xc80003fa". The search for answers from Microsoft and google provided a few resources, but nothing about the 64 bit version of Windows 7.

  The 'Automatic update' service is also absent from the services.msc

  This I think if applies also to Windows Live Messenger not me open a session because of an error "8e5e03fa."

  I can provide WindowsUpdate.log on request.

  Thank you

  ... I have not an antiviral program installed. Nor I have ever not to mention that the default windows Defender. Who now can not upload...

  Windows Defender is NOT an antivirus application.

  You see the effects of the hijackware infection give.

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• updates failed every night for Hewlett Packard Imaging printing HP Photosmart 6520 series NULL

  Since I have my printer photosmart 6520 02/12/2012 every night he's trying to update Hewlett Packard photosmart HP 6520 series print NULL Imaging... .and it fails every time.  I have a desktop HP P 7 1010 and since I got a new printer, I have an exclaimation point on my computer and it says the problems and when you do it it's is not drivers and it shows NO FIXED.  When you close the session at night, he tries to update the NULL characters again and it fails every time.  I spoke with people from your service many times for more than an hour and they can't solve the problem.  Help, please

  I did some research on the problem of another user, and looks like it's just a ghost update.  Basically, an update 'ghost' is an update that was for the device, but unit has newer drivers which causes the update failing to keep.  The only thing you can do is to hide the update, or ignore it.  Windows will continue to try to push it, but your printer does not need it.  If she didn't need the update, it would install right.  You can find the thread where I helped another user below.  I hope this helps.

  I can't update HP Imaging Null Point HP Desktop 3520 on computer laptop operating system Windows 7 error 80070490

• Tablet Lenovo Yoga 3. How to change default storage for ext SD map

  Hi team,

  I brought a new Tablet from Lenovo Yoga 3 (2 GB ram, 16 GB of internal storage)

  I inserted my memory card and its full display available.

  I couldn't find an option to set the default storage.

  Help, please.

  Thanks in advance

  Reach:

  Settings / storage

  At the top you should have 'writing on the disk by default'. Simply select SD card.

  By default, Apps will always be installed on internal memory. Those data can be moved, go on:

  Settings / applications

  Select 'manage applications '. Go to the SD card tab. Everything that can be moved will be listed here. You must select each App (one at a time). On the next screen, there is a box that says "move to SD card". Press on & wait.

  Other issues such as the media (music, videos) - depending on the application being used, you can record directly to SD card or use a file manager and manually move (cut / paste or ' move to ')

• Important update fails several times for Service Enhancement Pack - gives "WindowsUpdate_00000783" "WindowsUpdate_dt000" with 783 an unknown error.

  Service Pack1, kept getting this error, should upgrade to service pack 2 (for Vista) - still getting this error. Somewhere, I found referance that this update has to do with some features of Internet Explorer. Could be as this box appears on occasion:
  'ie.xplore.exe '.
  "Assert in LSP.
  "g_socket_data. Lookup (s) is 0 "
  'capture\lsp\nolsp\wsp_patches.cpp:1313 '.
  My choices are to quit, retry, or ignore
  I click on cancel or ignore (depending on my level of frustration) and should do so several times before the box disappears. Then, everything continues as usual.

  I don't see any other negative effect of this failure of the update or the pop up box (they can not yet be linked).

  Hello old dad,
  Thank you for writing to Microsoft Vista answers Forum.

  Try the following steps:
  1. first of all, I would like to ask allows you to create a system manually, Restore Point so that in this case, a problem occurs when performing these steps, you can always perform a system restore.
  2. you are trying to perform the optimization of the Internet.
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;936213
  3. If you have Internet Explorer 8, try to uninstall Internet Explorer 8, and then try to run the update.
  4. you can also try the following article below for General windows update issues.
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;822798
  5. try to disable security software during execution of the update of Windows.
  Let us know if it helps.

  Thank you and best regards,
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 643 - updates Fail - OVER and OVER

  For months, since the upgrade to Windows 7 Pro - night updates fails (error 643) for the security of Silverlight Silverlight (KB2416427) (KB978464) and Social Connector (KB2289116). Please tell me how to fix!

  Hello

  ·        Have you installed Sliverlight on the system?

  I suggest you to run some Surinamese check check the article mentioned below.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821/en-us

  I suggest you follow the steps mentioned below.

  Method 1:

  Step 1:

  I suggest to uninstall the updates you mentioned in the post (if installed) Windows updates and download updates from the links below and save it to the desktop.

  Description of the update for Microsoft Silverlight: 28 September 2010

  http://support.Microsoft.com/kb/2416427

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

  Update of security for Microsoft Silverlight (KB978464)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=7e3f6c16-1339-49bc-A60C-ddc6c3a54850&displaylang=en

  Update for Outlook Social Connector (KB2289116), 64-bit edition

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=029d7644-5f50-4ae0-A8D2-0acd605e2980

  Step 2:

  I suggest you perform a clean boot. To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 to start the computer in normal startup.

  Step 3:

  Install the updates on the system.

  Method 2:

  Reset windows update components and check. Follow the steps mentioned in the article below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to pass a message to update failed

  For some time, Firefox was unable to update in the background and gave messages to update failed (specific) every time the updates came. I solved this by downloading the full installation file and do a manual update.

  This time, I also had a message that failed (apparently incorrect) update, after a manual update, then again after a reboot, then again after an uninstall and reinstall, even if the troubleshooting information page shows that I am under v22.0 (see details below).

  It sounds like an obscure registry problem, but if the message is correct, how to fix it. If this is not the case, turn off?

  The browser is Firefox v22 (updated to v21) and I am running Windows 7 Professional.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

• Software update failed

  We have a server terminal server (RDS) on Windows Server 2008 R2 SP1. There are about 20 + users and almost everyone uses Firefox as their default browser. Version 18.0.2. When I run updates of FF, I do once logged as administrator when nobody else is logged on. However, for some reason, a couple users receive the message failed update of generic software when you start Firefox. If you click ok, FF starts anyway, and when you check the version, it actually tells 18.0.2 but prompts the user to restart to apply the update, which fails again. How can I erase this update check or instances of Firefox to realize that it IS up to date? This is the first time I saw this question, we use Firefox on this server for years. Help, please. I already read this article, nothing helped:

  https://support.Mozilla.org/en-us/KB/update-failed-error-message-when-updating

  Hello kfishasi, version 19.0 is the latest update of firefox, it came out yesterday, 19 February 2013, try to Update Firefox to the latest version as an administrator when nobody else is logged and check again.

  Thank you

• The TOSHIBA for Bluetooth ACPI driver update failed

  Hi all

  I have a P870 running on Windows 7 & until recently BT worked fine, now it doesn't.

  When I tried to download the latest version of the driver it says that I have the latest version of the driver.
  He also says that the device is functioning properly.

  It does not recognize my S4 where before he did.
  I now can not get it to pair because he does not see.

  When I did the last update of MS that I noticed the results put BT update failed, as shown below.

  Any ideas on a fix would be appreciated.

  The TOSHIBA for Bluetooth ACPI driver update
  Installation date: 08/08/2015-09:37
  Installation status: failed
  Error details: Code 80246005
  Update type: recommended

  This driver has been provided by TOSHIBA for the support of Bluetooth ACPI

  More information:
  http://sysdev.Microsoft.com/support/default.aspx

  Help and Support:
  http://support.Microsoft.com/select/?target=hub

  BT is activated using the function keys?

  What is the status of the Bluetooth technology in Device Manager?
  You see errors, some yellow exclamation?

  What you can do is use provided by the windows system restore and backup option and return to the point of time at the beginning, before the update have been installed...
  No doubt this has problem of BT

• Windows 7 Build 7600, Windows Update failed: Error Code 80096004

  Whenever I try to update my Windows 7 Home Edition Build 7600 through Windows Update, I get most of my updates reported as failures, and you try to update results once again updates failed fault and fault again, as in they are always fail. This computer is only a few weeks and I was never able to update windows properly and I always "error (s) found: Code 80096004.»

  I'm under Alienware BIOS A09 if this is any help, and windows is genuine through the OEM. I got non-genuine errors in previous windows that were due to windows update failures, and yesterday I restored my computer to factory default which has removed all errors except windows update errors. So, to get these updates correctly will mitigate hope-other problems I have.

  I used to receive the codes of error such as 80096003 and another who was something similar (do not remember exactly the code) to 8001b 010. Cutting windows firewall has removed these errors happen in windows update, or so I think.

  Anyway, the real culprit right now, I believe is the "error (s) found: Code 80096004.» How can I fix this error in my Windows Update so that I can continue to update? Whenever Windows Update tries to download updates, the process of "Download" will always result in a constant 0% and never pass and will always fail. I have about 30 updates, I need to download/update and catch him. Most are updated critical or very important.

  Thanks in advance.

  Hello
   
  
  Method 1.
  Reregister DLL files that are associated with Cryptographic Services
  To register .dll files that are associated with Cryptographic Services, follow these steps:
  a. Click Start, type cmd in the search box and right-click on cmd.exe, and then click Run as administrator.
  b. at the command prompt, type the following commands and press ENTER after each command:
  regsvr32 /u softpub.dll
  regsvr32 /u wintrust.dll
  regsvr32 /u initpki.dll
  regsvr32 /u dssenh.dll
  regsvr32 /u rsaenh.dll
  regsvr32 /u gpkcsp.dll
  regsvr32 /u sccbase.dll
  regsvr32 /u slbcsp.dll
  regsvr32 /u mssip32.dll
  regsvr32 /u cryptdlg.dll
  output c.
  Access the article mentioned below for more information:
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
   
   
  Method 2.
  Also visit this link and run Fixit to reset the Windows Update components:
  http://support.Microsoft.com/kb/971058
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• automatic updates fail to install.says 6 updates pending installation but when I click on install after installing it says cannot install updates gives 643 and 646 error codes

  need help for the automatic update of work again.has has not worked since October 16. gives error 643 and said 646.IRV 6 updates waiting to be loaded, but when I install and it does its thing, sometimes failed to install updates and gives these errors.clicked on the start menu where it says shuts down your computer and install updates but auto update still does not work

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows Update fails with Error 0x80072F76 on Windows 2003 server number

  I try to run windows update on my windows 2003 server. The update fails with number 0x80072F76 Errow. The Windows Firewall/Internet service Connection Sharing (ICS) is stopped and the security settings on IE is set by default. IE version is 8. The Windows Update screen is also not displayed correctly.

  You talk about servers, you use WSUS?

  Forum specific support by WSUS:
  http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads