KB2686509 install fails. Error "KB2686509 - failed due to the upgrade of Windows 98 to Windows XP".

Similar Questions

• My 80071aa7 error will be fixed by the upgrade to windows 7?

  I was not able to get any microsoft vista updates from my HP Pavilion laptop for over a year.
  The error is '80071aa7' which tries to update, do not and then try to update on every restart, and fails again and again.

  I want to upgrade to Windows 7 soon brings me to my question:

  The upgrade to windows 7 will fix the problem or I have to get it fixed before the update.

  Note: I found a solution for vista on RunonFriday.com blog, but it is a long process which seems to be the solution above my head.  Me would rather not attack is if Windows 7 will fix it anyway.

  Any thoughts?

  Hi lsawyer

  
  You try to use the steps below and check if these help. Also upgrade to Windows 7 should help you solve the problem-

   

  Method 1:
  You try to install the updates in a clean boot state to determine whether all non-Microsoft services interfere. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

  http://support.Microsoft.com/kb/929135

  If the problem is resolved check which service non-Microsoft is the source of the problem; referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

  Method 2:

  You can try to reset the Windows Update components and check if that helps. Follow the link given below to do the same.
  http://support.Microsoft.com/kb/971058

  Method 3:
  You can also follow the steps in the Microsoft article below and check if these help -.

  http://support.Microsoft.com/kb/949358

   

  I hope this helps.

• 0x8007002C error code - 0x4000D allocated (failure) the upgrade of windows 8 for windows 8.1. PC keeps trying the upgrade.

  Hello

  After hours of download and installation procedures, I met this "0x8007002C error Code - 0x4000D.
  This means that my upgrade of windows 8 for windows 8.1 failed. And not only that, now, I can't seem to stop my PC from acting on its own and to try the upgrade again and again. After running for some time, my PC is forced to restart. That's how the upgrade normal 8.0 to 8.1 takes place, only that my upgrade fails, takes hours to return to windows 8, allows me to work for a little while before doing the same thing all over again!
  I can handle Windows 8 a another couple of weeks, but like this, I'm not sure. So please help me.

  I've been running WinUp have failed upgrade from 10014 was available 2 or 3 weeks ago.  I was on the fast ring until yesterday when I saw that MSFT had issued some 10014 isos.  I have the .iso image file but I don't know any way (tell me if there are) run the file image .iso without formatting (that is the ideal situation, but I want to save my settings).

  I just wanted to say that whenever I see people have a hard time to install something, I always disable the AV, which for me is the default one built into Windows Defender) in Windows built 10. So I was failing to install on the black screen with a circle around the high proportion of progress of the installation of two weeks to get up to 70%) and disable the AV did not make a difference.

  I n ' t frankly found the explanation for this error using Google or Bing AV or otherwise. Often, I tried a bunch of forum threads Windows 10 outside but could not get a definitive explanation. I wonder why the world MSFT would not only list explicitly what are the problems without hiding it behind a series of meaningless numbers.  I hit the event viewer, and it did not help at all - as is often the case.

  Update Windows 10 Techinical Preview.

  We have restored the previous version of windows on this computer.

  0X8007002C - 0 x 30018

  I hoped when the .iso image file was released that MSFT could have improved their code for installation with Winup (fast or slow ring) to help the large percentage of people who have failed to install, but appears not to be the case.  I don't know if they have improved the code or not.

  Thank you

  I've updated to windows 8.1. Thanks to no support from Microsoft. Had to go like 50 websites and try 10 methods until I was finally able to download an iso of windows 8.1 that works with my OEM supplied windows 8.

  Try searching for the Installation of windows by using the ISO. You can download the ISO Downloader windows since Ms. If you have a windows OEM (dell / hp etc.) with built-in win8, you will have to perhaps select the iso right and install it. Once installed, go to the activation and windows with automatically activated with your authentic win8 key.

  I don't know why MS makes it so difficult to get the iso standard. Try this method. You will be saved of all evil.

• Error - missing operating system after the upgrade to Windows XP Professional from Windows XP Home Edition.

  Original title: lack of an operating system.

  I have a Dell which had windows xp home installed on it I upgraded a while back to pro, the problem is the operating system that you are completely crushed and all I have is a cd to upgrade so it won't let me install because it said that missing operating systems... so what can I do that won't cost me a thing!

  Hi mistyblu976,

  This problem may occur if one or more of the following conditions are met:

  (a) basic input/output system (BIOS) does not detect the hard drive.

  (b) the hard disk is damaged.

  (c) sector 0 of the physical disk has an incorrect or malformed master boot (MBR) record.

  You can follow this link & check if it helps.

  "Operating system not found" or the "Missing operating system" error message when you start your Windows XP-based computer

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I tried to install an update for CS6, but every time he tells me that the installation failed due to the error um44m2p7 help please!

  I tried to install an update for CS6, but every time he tells me that the installation failed due to the error um44m2p7 help please!

  Refer

  Do not install updates | Failure to update or U44M errors

• Create an instance of the component with CLSID {0002DF01-0000-0000-C000-000000000046} COM IClassFactory failed due to the following error: 80004005.

  I have IE 9 installed on my machine. When I try to create objects of IE using SHDocVw. Its version is 6.1.7601.17514. When I run my windows service it runs fine but when I create an installer and then run, it displays the error message: creating an instance of the component with CLSID {0002DF01-0000-0000-C000-000000000046} COM IClassFactory failed due to the following error: 80004005.

  IE = new SHDocVw.InternetExplorer ();
  IE = new SHDocVw.InternetExplorer (true);

  I tried the two lines.

  Please give me a solution.

  Hi Patrick,

  The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the MSDN forums.

  Please post your question in the MSDN Forums.

  You can follow this link to ask your question:

  http://msdn.Microsoft.com/en-us/library/aa752084%28V=vs.85%29.aspx

  I hope this helps. If you have problems of Windows in the future, let us know and we would be happy to help you.

• How to repair the CLSID {830690FC-BF2F-47A6-AC2D-330BCB402664} failed due to the following error: 80040154.

  How I need to solve this problem? I didn't install on my desktop, no problem, but I install in my laptop this pop up when I run the software

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.Runtime.InteropServices.COMException (0 x 80040154): recovery of the class factory COM for component with CLSID {830690FC-BF2F-47A6-AC2D-330BCB402664} failed due to the following error: 80040154.
  at R2D2CtrlPanel.CSkypeMediator.ConnectToSkype)
  to R2D2CtrlPanel.CSkypeMediator... ctor()
  to R2D2CtrlPanel.R2D2Panel... ctor (img CImages, CRequiredVerifier & parent)
  at R2D2CtrlPanel.CRequiredVerifier.Timer_runOnce_Tick (Object sender, EventArgs e)
  to System.Windows.Forms.Timer.OnTick (ByVal e As EventArgs)
  at System.Windows.Forms.Timer.TimerNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.
  mscorlib
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5456 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
  ----------------------------------------
  R2D2CtrlPanel
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  CodeBase: file:///C:/Program%20Files%20(x86) R2D2CtrlPanel.exe
  ----------------------------------------
  Microsoft.VisualBasic
  Assembly version: 8.0.0.0
  Win32 Version: 8.0.50727.5420 (Win7SP1.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
  ----------------------------------------
  System
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5456 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5460 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5462 (Win7SP1GDR.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  System.Runtime.Remoting
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.5420 (Win7SP1.050727 - 5400)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
  ----------------------------------------
  Interop.SKYPE4COMLib
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  CodeBase: file:///C:/Program%20Files%20(x86) /Interop.SKYPE4COMLib.DLL
  ----------------------------------------

  JIT debugging *.
  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.

  For example:

  
     
  

  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.

  Thank you

  Hello

  -When exactly you receive this error message?

  -What is the software you are trying to start?

  -Did you do changes on the computer before this problem?

  If the issue is with Visual Basic, it is better suited for the IT audience Pro on MSDN. Please ask your question in the MSDN Support Forum. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en-IE/vsexpressvb/threads

  Hope this information helps.

• Group Policy infrastructure failed due to the error below. The specified domain does not exist or could not be contacted.

  using several Windows 2003 domain in an attempt to push the msi using Group Policy is following on xp sp3 machine error

  Group Policy infrastructure failed due to the error below.
  The specified domain does not exist or could not be contacted.

  Note: Due to the GP Core failure, no other component processes Group Policy policy.  Consequently, status information for the other components are not available.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows Forums. Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Recovery of the class factory COM for component with CLSID {3CE74DE4-53D3-4D74-8B83-431B3828BA53} failed due to the following error: 80040154

  When I run pdf reader applications, I get this error:

  Recovery of the class factory COM for component with CLSID {3CE74DE4-53D3-4D74-8B83-431B3828BA53} failed due to the following error: 80040154

  Hello

  1. you remember to make changes to the computer before this problem?

  2 are you able to open files from other Adobe programs?

  Follow these methods.

  Method 1: The problem is that by default, when the PDF program is used as a COM object, then it cannot be activated by the following accounts:

  (a) a Director

  (b) system

  (c) interactive

  How to solve this problem is to change the DCOM settings for the Application'S object.

  Configure DCOM

  a. click Start, type run in the start search field.

  b. type DCOMCNFG , and then press OK. (This will load the "Component Services")

  c. navigate to Component Services, click computers, my computer, DCOM Config application PDF.

  d. right-click and select Properties.

  e. Select the Security tab.

  f. in "Launch and activate permissions" select personalise and press change.

  g. press the Add button to select the "Network Service" account

  f. click on the OK button, and then test your application, it should work fine now.

  Method 2: If this does not help, you can uninstall and reinstall Adobe reader software and check.
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  You can download the latest version of Adobe reader from the following link.
  http://get.Adobe.com/reader/

• FDPSTP failed due to the ORA-20100: error: failure FND_FILE. Cannot create the f

  Hi all
  
  It seems that I added a thread after another today. I have problems using FND_FILE in the simultaneous program (R12 on W2K2). I tried to google for a solution, but nothing has worked for me. Here is the error message:
  
  Error ORACLE 20100 in FDPSTP
  
  Cause: FDPSTP failed due to the ORA-20100: error: failure FND_FILE. Failed to create the file, o2053488.tmp in the c:\temp directory.
  You can find more information in the applications log.
  ORA-06512: at the 'APPS '. FND_FILE', line 417
  ORA-065
  
  $APPLTMP is set to j:\oracle\VIS\inst\apps\VIS_eviasl\appltmp
  $APPLPTMP is set to j:\temp
  UTL_FILE_DIR is defined as:
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  UTL_FILE_DIR string j:\temp, j:\oracle\VIS\db\tech
  _st\11.1.0\plsql\temp, j:\orac
  le\VIS\db\tech_st\11.1.0\appsu
  til\outbound\VIS_eviasl
  
  but I still get the message that he seeks in c:\temp.
  
  Concerning
  Piotr

  Cause: FDPSTP failed due to the ORA-20100: error: failure FND_FILE. Failed to create the file, o2053488.tmp in the c:\temp directory.
  You can find more information in the applications log.
  ORA-06512: at the 'APPS '. FND_FILE', line 417

  Please see old threads that deal with the same subject - http://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-20100&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001

  Thank you
  Hussein

• «Configuration manager Enterprise failed due to the ff...» 11 g/windows 7

  I get this error message when you use DBCA to create a database. Help, please! Study on mine for OCA.
  
  Error message: "the business manager configuration failed due to the following error: listener has not elapsed or database service is not registered with it.» Start the listener and register the service of database and rerun the wizard of Configuration EM. »
  
  I did the following:
  (1) earphone Checked properties service and that the path to the executable file was
  
  DriveLetter:\app\product\11.1.0\db_2\bin\oracle.exeoca11g
  
  I have change the path above for what is indicated below:
  
  DriveLetter:\app\product\11.1.0\db_2\bin\tnslsnr
  
  I've updated: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OracleOCA11gTNSListener
  image file to reflect the change.
  
  I received the suggestion above of a blog. Not sure if it's good or bad, but it seems logical. However, it did not solve my problem
  
  
  (2) I executed the script of the emca in db_home/bin as suggests the warning message in the DBCA Wizard. Restart my PC. Still no luck.
  
  
  (3) I have open DBCA to verify the database (via del) is created, and yes it is.
  I open 'EM and tried to log into the tool as the user Sys/sysdba. I have the username and/or password are invalid error message. URL: https (strike-through) localhost://158/em/console/logon/logon
  I can connect to SQl more as another user sys/sysdba but in EM.

  The command that you use is

  >
  $ cp /media/sf_TEMP/*.zip/home/oracle/media
  >

  As noted above, if you have any experience with Unix, it is a steep learning curve

  HTH
  Srini

• fdmload failed due to the ORA-00942 on passage with custom liability

  Hello
  
  I created a top custom applications R12
  
  When I go to personal responsibility
  
  It gives an error
  
  fdmload failed due to the ORA-00942: table or view doesnot exist
  
  Thus a long sql code is given
  
  in the message mentioned tables are fnd_menu_entries_tl and fnd_menu_entries
  
  APPS Version: 12.1.2
  DB 11.2.0.1

  Hello

  full error message

  APP-FND-01564 error 942 in fdmload
  cause: failed to fdmload EU to ora-00942 table or view doesnot exist

  I also gave access to tables

  Please see (RSOB responsibility: FDMLOAD fails Due to ORA-00942 [337896.1 ID]).

  Thank you
  Hussein

• Pavilion g6 2213 its drivers needed for Windows 7 when you run the upgrade to Windows 8.1 failed (lots!)

  Hello

  After the upgrade to Windows 8.1 the OEM of Windows 8 my machine on the ground to stop. I looked at some common problems, but there are just to many to test when my machine is so slow. Right click takes about 10 minutes to display the menu to give you an idea.

  To make things worse, I tried to do a reset of the HP recovery but it kept also, failing a lesson well learned to create additional recovery CD!

  In any case, I have a copy of Windows 7 but HP does not support this OS on this system, I searched this forum but can't find anything particular about my model number and drivers Windows 7.

  A point in the right direction for Windows 7 drivers for this system would be a great help or advice for me to use the machine on the 8.1

  See you soon

  Hello:

  Your model is pretty easy to install W7 x 64 on.

  If you let me know which model of laptop wireless card is came with, I'll post the link to this driver too.

  I don't think the drivers wireless since the page g7z-2100 driver will work.

  Here are links to most of the drivers you need:

  First of all, download and install the AMD chipset driver and restart.  To install the smbus and usb3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  You can then use all the other W7 x 64 drivers and software the g7z-2100 on the link below (except maybe the wireless).

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5275619

• Failed to open the store in windows 8

  Help. I can't open the store, it keeps going back to start the screen whenever I click on it. Goes the same for "Set the PC", he returned to the home screen again. Nothing happened. The computer is offline and I reset the time zone also but nothing has changed. It has something to do with the first installation? Because I just bought the computer a few days ago and it comes with the Windows 8 SL.

  And I can not download Skype also, it keeps directing the computer to the windows store while I can't open the store.

  • Sometimes, after the upgrade to Windows 8.1, the App Store may not start.
  • He could still show the number of updates available on the live tile.
  • From the app can show a ring of progress, but it can not finish loading.
  • To resolve this problem, run the following in a command window (CMD) to reregister the App Store:

  PowerShell - ExecutionPolicy Unrestricted Add-AppxPackage - registry DisableDevelopmentMode-$Env:SystemRoot\WinStore\AppxManifest.XML

  • If you get the error 0x8007064A after you run, that means that the registry key 'HKEY_CURRENT_USER\Software\Classes\Local Settings\Software\Microsoft\Windows\CurrentVersion\AppModel\Repository\packages' has noSYSTEM as owner.
  • Change the owner to the SYSTEM as explained here and try again.
  • To solve three other applications system such as laptop settings, run the following:

  PowerShell - ExecutionPolicy Unrestricted Add-AppxPackage - registry DisableDevelopmentMode-$Env:SystemRoot\camera\AppxManifest.xml

  PowerShell - ExecutionPolicy Unrestricted Add-AppxPackage - registry DisableDevelopmentMode-$Env:SystemRoot\FileManager\AppxManifest.xml

  PowerShell - ExecutionPolicy Unrestricted Add-AppxPackage - registry DisableDevelopmentMode-$Env:SystemRoot\ImmersiveControlPanel\AppxManifest.xml

• HDR and Panorama fail after the upgrade to Windows 10

  After the upgrade to Windows 10, trying to merge pictures gives the message "unknown error occurred".  After the first attempt, I've updated my driver graphic card, and HDR worked.  But the next time, the error message reappears, and this has been consistent - if the graphics card is engaged or disabled!  My graphics card is NVIDIA GeForce GT 750 M.

  The problem turned out to be unrelated to Windows 10.  For reasons I can't understand, it is limited to one set of photos taken on a single morning. So, no problems with Windows 10.