kb953691and all updates fail with Error 8007000 b code

Similar Questions

• all of the updates fail with Error 8007000 b code

  The computer of my mother (HP Pavilion running Windows Vista 32-bit Home, 3 GB of RAM) is no longer up-to-date windows. Every time she trieds to run the MS Updater it fails with the error code 8007000 b.  She has not been able to update in the last 3 months or more of what I can tell.  I tried everything to a restore point (no luck) to download Windows Fix - it. That did not help either.  Short of reinstalling Windows completely with a system restore, is there another way to solve this problem?

  Some additional data - she rolls Kaspersky Internet Security 2011 and I tried to turn off during the process of "update" to see if maybe that was the cause. It wasn't.

  Thank you

  Mark

  A KB was created for the 8007000 b error code that appears when installing Microsoft Updates or Windows Update. The KB includes an automated Microsoft Fix it 50140 that corrects the problem.

  Look at the following KB: http://support.microsoft.com/kb/956699>

  Suggest you download and save the fix it.

  Then close all open programs and browsers before running MS fix 50140.msi.

  UTC/GMT is 20:57 on Saturday, February 18, 2012

• Windows Update fails with error [error number: 0x800A0007]-which is not listed

  Windows update fails with error [error number: 0x800A0007]-which is not listed, so unable to update the system

  The other post:

  Thank you for your reply - but the problem persists - this is mopre complete info.
  The system starts well and runs - BUT I cannot now be updated because when I access "Windows Update" it always returns this error message.
  Also, none of the messages in your "appliesto" step 2 recommended link will be applied effectively.
  As far as I know - we have a standard system and I just ran again ONCE a full system virus etc check - all clean.
  Also your "Mr Fixit" was performed several times, but nothing changes.
  Because it enters the update process, and then always closes with this specific message (which as I said is NOT in your list of error messages), which SHOULD tell your software writers where is the problem.
  This is what is happening in the process of updating before it fails:
  Keep your computer up-to-date
  Check to see if you need updates for Windows, your programs, your hardware or your devices.

  Get updates of high priority (recommended)
  Select among the priority and optional updates for Windows and other programs

  ... and it does not matter if I say "express" or "custom" - headed then:

  Checking for updates for your computer...

  but fails after a few seconds with the same message as follows:

  [Error number: 0x800A0007]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  -However, it is the State of the system for more complete information for you:
   
  Name of the operating system Microsoft Windows XP Home Edition
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  MISCHU06BLUE system name
  System manufacturer Compaq Presario 061
  ED865AA - ABA SR1610NX NA540 system model
  System Type X 86-based PC
  Processor x 86 family 15 model 47 Stepping 2 AuthenticAMD ~ 1790 Mhz
  Version/Date BIOS Phoenix Technologies, LTD 3.33, 17/08/2005
  SMBIOS Version 2.4
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  MISCHU06BLUE\Compaq_Owner user name
  Time zone Pacific Daylight Time
  Total physical memory 1 024,00 MB
  Available physical memory 468,50 MB
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 1.51 GB
  Paging file C:\pagefile.sys

  Please get us some help to solve this problem.
  What else can I provide?

  I didn't ask if it was a new issue or a new problem, I asked if she was the same computer?

  [This applies to your recent 'me, too' answer to another thread.]

• Update fails with error code 48 9.

  Original title: code9C48

  I get this update failed with... 9 ethical c 48... any information would be greatly appreciated... Thank you

  Hi TeresaReynolds,

  ·         Update fails with error code 9 48?

  ·         Are you facing this problem with a particular update or all updates?

  ·         Remember to make changes to the computer, after which the issue started?

  Try the following steps:

  Step 1:

  Temporarily disable the antivirus on the computer running software and check if it helps:

  Disable the anti-virus software

  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Reset Windows components updates default and check to see if it helps:

  How to reset the Windows Update components?

  I hope this helps.

• Update fails with error code 652 "WindowsUpdate_00000652" "WindowsUpdate_dt000" Is there a solution?

  Update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB973688). UPDATE FAILS WITH ERROR 652, ENCOUNTERED AN UNKNOWN ERROR.

  Download size: 5.4 MB

  Update type: Important

  Jim,
  Take a look at this article and see if applies: Mike KB971187 - engineer Microsoft Support responses
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista premium sp2 updates fail with error 80070643 dt000

  Vista premium sp2 updates fail with error 80070643 dt000 I tried to fix the profile of .net framework 4 cliemnt but not resolved. It cannot update update software & MS updates almost obsolete year now. Ideas anyone please?

  Hi Ruth,

  Error code 80070643 is a generic error that basically indicate that an error has been detected by Windows Installer.

  Method 1:

  You can perform the steps described in the article.

  You receive error code 80070643 0 x or 0 x 643, code error when you use Windows Update or Microsoft Update web sites to install updates
  http://support.Microsoft.com/default.aspx/KB/958052

  If you have performed the steps in clean boot mentioned in this article, don't forget to put the computer to a normal startup by referring to the section "How to return a normal Windows startup mode" in this article once the diagnosis is complete

  Note: If you have already completed the steps in this article, you can go to the next method.

  Method 2:
  

  You may need to restart the Office Source Engine (OSE) service

  Windows Update error 80070643

  http://Windows.Microsoft.com/en-in/Windows-Vista/Windows-Update-error-80070643

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information helps. Response with status so that we can help you.

• System analysis tool update fails with error 0x800704c7

  After having the problem that Windows Update crashes on 'check updates', I followed the recommendations on http://windows.microsoft.com/en-ca/windows7/what-is-the-system-update-readiness-tool, installed the preparation tool system update, but unfortunately after several hours, it failed with error 0x800704c7. What can I do now?

  I'm on a Toshiba PC with Windows 7 professional service Pack 1 32-bit.

  If looking for updates to hang on a current installation,

  Be sure and go to uninstall a program and see which Microsoft Net framework you have installed.

  4.5.2 is more consistent to have installed,

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=42642

  Switch your windows update setting to never check the updates temporarily

  Restart the machine

  You can try and install the latest client update manually let your update settings to never check for updates until you install it.

  https://support.Microsoft.com/en-us/KB/3138612

  Then you download this from your download folder run from there.

  https://TechNet.Microsoft.com/library/security/MS16-039?f=255&MSPPError=-2147217396

  Download the x 86 for 32-bit or x 64 for 64-bit

  Install it and restart when prompted too after he did a search of stand-alone for updates that should not

  take too long, it took all of 5 seconds, '' If '' windows update settings are turned on forever check

  updates before running from the downloads folder.

  Once it installs and restarts

  You can reset your updates affecting everything you had before default =...

  Then check the updates manually.

  I think that the solution came from Softpedia and Joel_CS posted on this thread,

  http://News.Softpedia.com/news/Windows-Update-hanging-when-downloading-April-12-patches-502886.shtml

  You must scroll down for Joel SC post threads, it is the last answer on this page,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-hangs/dbd539c3-bfc6-42DF-a6ff-0e55ef7938eb?page=6

• Automatic update fails with error #16824

  I just deployed a new version of my app and AutoUpdate updates fail with the dreaded #16824 error.

  

  However, I have not upgraded my SDK between releases, nor I have changed anything in my other than the version numbers update.xml. And the build and deploy process is automated, so that should not have changed either. What could be going on here?

  Old update.xml:

  <?xml version='1.0' encoding='UTF-8'?> 
   <update xmlns='http://ns.adobe.com/air/framework/update/description/1.0'> 
     <version>2.1.22</version> 
     <url>http://ramp.leancoder.com/client/downloads/ramp.air</url> 
  </update>
  

  New update.xml:

  <?xml version='1.0' encoding='UTF-8'?> 
   <update xmlns='http://ns.adobe.com/air/framework/update/description/1.0'> 
     <version>2.1.26</version> 
     <url>http://ramp.leancoder.com/client/downloads/ramp.air</url> 
  </update>
  

  The two versions were built with:

  $bin/adt -version
  adt version "2.0.2.12610"
  

  This error, in this case, is the result of a self-signed certificate has expired.

  Generate a new certificate and using the "adt - migrate" command (description here) solved the problem.

• Windows Update fails with Error 0x80072F76 on Windows 2003 server number

  I try to run windows update on my windows 2003 server. The update fails with number 0x80072F76 Errow. The Windows Firewall/Internet service Connection Sharing (ICS) is stopped and the security settings on IE is set by default. IE version is 8. The Windows Update screen is also not displayed correctly.

  You talk about servers, you use WSUS?

  Forum specific support by WSUS:
  http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads

• Update fails with error 8007057

  Tried to update windows Vista with Vista Service pack 2.  Update failed with code 80070570

  0 X 80070570 - ERROR_FILE_CORRUPT
  The file or directory is corrupted and unreadable.

  Suggestion:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• Brother MFC-7820N update fails with error 80070490

  Original title: Brother MFC-7820N failed update

  Apparently, I have to use the construct in Windows 8 pilots for the Brother MFC-7820n (connected via a network). I can print fine, but cannot scan. None of the drivers of brother works for the installation of the scanner. After talking with brother, they said I should use Windows Update to get the latest drivers. I tried this several times, but the update fails with 80070490. Any ideas?

  Original title: Brother MFC-7820N failed update

  Apparently, I have to use the construct in Windows 8 pilots for the Brother MFC-7820n (connected via a network). I can print fine, but cannot scan. None of the drivers of brother works for the installation of the scanner. After talking with brother, they said I should use Windows Update to get the latest drivers. I tried this several times, but the update fails with 80070490. Any ideas?

  According to brother Tech Support, brother does not support scanning or PC to Fax printers MFC (connected Ethernet) network.  Here is a direct quote to support Brother on 24/11/12:

  «Currently we have everything planned out a complete set of MFL Pro Suite software (Control Center, send/receive PC - Fax, etc.).» Scan of the MFC
  on a network connection is not supported by the built-in support to
  Windows 8 operating system. "

• Windows update fails with error '... DllRegisterServer was not found... ».

  I have exactly the same problem as http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/unable-to-install-windows-updates-error-power/f69a884d-c11c-4e9f-badd-12bafb61d091?tab=AllReplies&tm=1345292404518. The steps gave me the same exact results, as they are described by Ann l. a. at WILL. If the problem persists and I don't know what else to do. HELP PLEASE!

  Original title: Windows update fails

  The problem is solved with these steps (recommended by a microsoft technician):

  1. Click Start, all programs, accessories.
  2. Right-click on command prompt , and then click run as administrator.
  3. In the command prompt, type the following commands and press ENTER after each one.

     CD %windir%\System32
     net stop wuauserv
     net stop bits
     net stop cryptsvc
     Ren C:\Windows\SoftwareDistribution SD2
     net start wuauserv
     net start bits
     net start cryptsvc
     

  Thanks for the interest if!

• KB2564958 and KB2567053 updates fail with error code 800b0100

  I get the error 800b0100 code.  Only security updates fail.  All other updates installed correctly.  I tried to update KB2564958 and KB2567053 for days.  I ran Hitman Pro, AVG, Malwarebytes and Spybot Search and Destroy to see if I had a bug that prevented the update with negative results.  I downloaded and ran patch KB941821 and it did not help.  Also tried Microsoft fixit.  I even ran a disk check that has been proposed in the Microsoft forums without success.

  http://support.Microsoft.com/kb/956702

• Photoshop CS6 v 13.1.2 update failed with error U44M1P7

  I have a cloud creative update notice for Photoshop CS6 on my Mac. My copy of CS6 version is 13.0.6. When I click on "Update" I get error failure of U44M1P7 to update once the process is complete to 100%. I tried to change the name of the 1.0 folder in AAMUpdater; It does not work. I tried to find the update for the new version (13.1.2) on the Adobe Update site and it seems nowhere to be found. Please, Adobe, tell us how to make this update!

  Hi WmHalvorsen,

  I'm sorry that you are having problems updating!

  You have a creative cloud subscription? V13.1.2 CS6 is an update with features specifically for members of cloud. Download links for perpetual versions of Photoshop are available here: Adobe - Photoshop: for Macintosh or here: applications download Creative Suite 6

  If you are a member of creative cloud trying to update the version of CS6 Cloud:

  Looks like you tried Solution 1 here Installation failed. Error U44M1P7 | Updates, but without success. Have you tried the Solutions 2 and 3?, for Solution 2, apply to the update via a direct download: updates all Adobe CC 2015: the direct download links for Mac OS | ProDesignTools. Read the instructions on the ProDesign page before clicking on the links.

  If this does not work, you may uninstall and reinstall Photoshop by Solution 3 in document U44M1P7.

  Finally, you can also refer to this discussion for more information on how a similar question was addressed: update to Photoshop CS6 13.1.2.

  I hope this helps.

  Best,

  Del

• (KB2378111, 12.0 MB, published 12/10/10) for Windows Vista security update failed with error 800b0100.

  Update of security (KB2378111, 12.0 MB, published 12/10/10) for Win Vista failed with the error 800b0100. Failure of several attempts, power, played external parser M.S., downloaded System Update Readiness Tool, saved the file on the desktop to install proxy server disabled by bike. Nothing has worked.

  Start a help tickethttp://support.microsoft.com/common/international.aspx?rdpath=1&gprid=9860>

  See the section "How to get help" of http://support.microsoft.com/kb/2378111

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Start a free Windows Update support incident email request:https://support.microsoft.com/oas/default.aspx?gprid=6527

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  OPTION has:

  • 1. open IE 32-bit (only) to https://consumersecuritysupport.microsoft.com/

    2. click on security updates aren't installed properly

    3. on the resulting page, click CONTINUE

    4. Select an appropriate country and language, and then click CONTINUE

    5. click on the option support by PHONE or email.

    OPTION B:

    Start an email from Windows Update support incident request for free

    https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx