Keep adding values to the PDF-field

Similar Questions

• Get the field to remain Virgin until the user enters the value in the previous field used in the calculation

  I work on a PDF form and am stuck on one of my calculations. There are two fields 'desired Start Date", which is a date entered by the user. The "desired end" date is one year from date entered by the user. I figured out - however, before the user enters a date, I want this field remains empty. Currently, it fills with 01/00/000. How can I get this field to calculate not unless a date is entered by the user? So far, I tried this but can not get the blank to stay:

  If the field 'Desired Start Date' is empty, leave 'to' field blank

  var myStartDate = new Date (this.getField("Desired_Effective_Date").value);

  If (((myStartDate == 0) & & (getField("myStartDate").valueAsString = "")) {event.value = "";})

  If the field "Desired Start Date" is an effective date, use the date to calculate one year after the date of entry.

  }

  else {this.getField("to").value = util.printd ("mm/dd/yyyy", new Date (myStartDate.getFullYear () + 1, myStartDate.getMonth (), myStartDate.getDate ()))}

  Try the following than the calculation script custom field "to".

  Get the value of the date field beginning

  var sStartDate = getField("Desired_Effective_Date").valueAsString;

  If the start date field is not empty...

  If {(sStartDate)

  Converts a date in a date object string

  Kai = util.scand ("mm/dd/yyyy", sStartDate);

  Add a year

  oDate.setFullYear (oDate.getFullYear () + 1);

  Set this field to the calculated date value

  Event.Value = util.printd ("mm/dd/yyyy", anyway);

  } else {}

  This field blank because the input field is empty

  Event.Value = "";

  }

  You may need to change the date format "mm/dd/yyyy", I used to match the formats of date fields.

• How to assign the value to the text field dynamically

  Hello

  I created a form that accepts input from the front desk.  As soon as I select ACCOUNT_CODE using LOV, I would like to define a DISPLAY only field INSTALMENT_AMOUNT with values that is available in another table based on the value of the ACCOUNT_CODE field.

  I already have the query to retrieve the details.  However, I wanted to know how to proceed.

  I created 'point page' INSTALMENT_AMOUNT in the form.  On this point in relation to a created "computation".  But the value is been showed that when I open an existing record for editing.  Not during new save when I try to create.  I would like to fill the value, when I create a new record and after selection of the ACCOUNT_CODE value.

  

  Thank you

  -Anand

  anand_gp wrote:

  I created a form that accepts input from the front desk.  As soon as I select the ACCOUNT_CODE using LOV, I would like to define a DISPLAY only field INSTALMENT_AMOUNT with values that is available in another table based on the value of the ACCOUNT_CODE field.

  I already have the query to retrieve the details.  However, I wanted to know how to proceed.

  I created 'point page' INSTALMENT_AMOUNT in the form.  On this point in relation to a created "computation".  But the value is been showed that when I open an existing record for editing.  Not during new save when I try to create.  I would like to fill the value, when I create a new record and after selection of the ACCOUNT_CODE value.

  

  Events in response to actions of the user in the browser at run time are implemented using dynamic measurements.

  In this case, use a dynamic action change in the P270_ACCOUNT_CODE article, with action set the value by specifying P270_ACCOUNT_CODE in the elements of the Page to send and your source of SQL as the SQL statement.

• Initial value of the checkbox field is not affected.

  Hello
  
  I have a custom form with 2 fields, which is a check box which is below the values
  Value when checked: 1
  Value when disabled: 0
  Mapping of other values box: checked
  
  and the other is a text field. Please insert text fields field data into the table db that are checked.
  
  Iof displayed the Web file number is 10.
  
  
  I use the code in the trigger of the COMMIT BUTTON to save data in the table below. that is, I'm insertion of the value of the text field in table for the check box that is checked
  
  GO_BLOCK ("CHANNELS");
  premier_enregistrement;
  LOOP
  IF: CHANNELS. CHECK = 1 THEN
  INSERT into...
  WHEN THE OUTPUT: SYSTEM. LAST_RECORD = "TRUE";
  NEXT_RECORD;
  END LOOP;
  COMMIT;
  END;
  
  
  The problem is the value of the checkbox is always null and records are not get inserted into the table. Y at - it elsewhere, that we have to specify the initial value of the box. Not sure why the value of the checkbox becomes void even if the ix checked checkbox.
  
  Thank you
  Didi.

  What you have listed for the property of the initial value of your box?

  Craig...

• How to restrict user access to must enter a value in the mandatory fields

  Greetings!
  
  I had a personal information form. I want to restrict the user to enter values in all areas of mandatory for example fields (username, date of birth, etc.)
  How to limit the search user must enter a value in the mandatory fields

  Create dynamic actions for each of the fields, or you can create javascript.
  for example create dynamic action 1 with event as tune-up losing select the item and the condition as NULL and action as alert and type the message you want to display in the text section.

  Thank you
  Mehabub

• Do 1 field equal to the value of the 2 fields.

  How to make 1 field equal to the value of 2 text fields.

  I've got text field 1 and I need to match the value in the address 1 field and the address field 2.  Essentially, I need what is in the address 1 field and 2 combine into a single field, the text field 1.

  Any suggestions?

  Thank you

  When in a field and trying to reference it, to use the «event.value "to access the value property of the field.» The value of the subject field is not updated until that leaves him the ground. I would use:

  event... value = this.getField("FL052").value + this.getField("FL053").value;

  For the calculation script customized.

• Web page open based on the value of the text field

  I want to open a web page that is based on the value of a text field.  How to bind the value of a text field to a command which will open the web page?

  For example, the value of the text field is: 8 t - EXT

  and the web page I want to open when you press a button is: http://hqms/doc.asp?dn=8T-EXT

  As you can see that the 8 t - EXT is something that a person enters the form and is what is needed to open the web page.  The other text in the link of the webpage is always the same.

  Thank you

  Hello

  In the click event of the button, place the following JavaScript code:

  if (TextField1.rawValue !== null) {
       var vURL = "http://hqms/doc.asp?dn=" + TextField1.rawValue;
       app.launchURL(vURL, true);
  }
  else {
       app.alert("Dear user, please put a code in the text field. Thank you!");
  }
  

  You need to change the object references based on your shape.

  Niall

• Get the value of the title field

  My question is simple. Here's my scenario.
  
  I have a check for profile, with an editable title field and a list of options. The user selects a value in the option list and entered a title. When he submits the form, the title of the content check-in must be derived from the value of the option list + the value of the field title. The derivative title must be the concatenation of the value of the option list, and the value of the field title.
  
  My question is how to get the value of the field title using the script of the OIDC? I have a rule with the field of dDocTitle and its derivative field, I have an idoc script that displays the value of the option list in the spin-off title field. I only need to concatenate the value of the editable field title entered by the user.
  
  Thank you. I use UCM 10 g.

  This can be done with rules and profiles of the school boards and derived values.

  If the user enters a title in the field of dDocTitle (this is mandatory) and if you have another field of metadata with a menu drop-down (as conceptual dDocType) you can use the Configuration Manager (rules and profiles) take the value of dDocTitle and dDocType and when checked (it not shown to the user after logging) she'll concatenate.

  in the custom box (you may need to do this because of the wrong inserts quotes with our variables) make sure that it looks like this
  <$dprDerivedValue=dDocTitle &="" ddoctype$="">

  Notes that may be of interest
  How can define you a value derived in a rule using Idoc Script to call a service? (Doc ID 833953.1)
  Who wins: rule or a set of default metadata about a file? (Doc ID 798653.1)

• Can I directly change the value of the dist_id field in the database?

  When I tried a url created by gblinkapp, Adobe Digital Editions gave me an E_LIC_NO_DISTRIBUTION_RIGHTS error.

  I'm looking on the database:

  • I have 2 records in the table Distributor , first integrated and mine.
    
  • In the distributionrights and distusednonce tables, the value of the dist_id field (which is the primary key of table Distributor ) is always the "built-in" ID

  I guess that ACS3 to ACS4 migration was made prior to the addition of our real Distributor...

  Your quick start guide explains clearly that "the integrated distributor" cannot be used to distribute the books.

  If can I update the dist_id directly in the tables distributionrights and distusedonce with the dist_id of our distributor without future problems in ACS4 value?

  If this is not the case, how can I change the distributor of my books safe?

  Thank you

  You do not want to delete the record for the integrated Distributor, because that will cause problems and given what you have described the probably won't solve the problem.

  The most common cause of E_LIC_NO_DISTRIBUTION_RIGHTS is because you try to make a loan (URL with action = enterloan instead of action = enterorder), when you have not created a right distribution of type "ready".  In the administration console, if you have already created a right distribution of type buy, then in the inventory tab, with the Distributor, then the resource selected, you just need to click on the icon "+" next to the distribution rights and to create a new right 'ready' type distribution  If your problem is that you did not create the distribution rights for the Distributor, and then you can drag the resource on the distribution server to create a first 'buy' distribution right.

  Alternatively, you can also use DistribTool.jar to create the appropriate distribution right.  Documentation for this tool is in the documentation of source sample.

  However the DistribTool and AdminConsole end up doing the same thing, which is to use the ManageDistributionRights admin web service endpoint to create a new right of distribution.  If these tools are not to your liking, you're probably better choose a writing tool in your preferred language to make calls to services web admin, so that you can make it work as you want it to work instead of the DistribTool way or AdminConsole works.

• cfformitem type = &amp; quot; script &amp; quot; : how to set the value of the hidden field?

  I have a simple test form that contains a cftree and some fields of seizure/hidden. Whenever a tree node is selected, I want to change the values of the fields of entry/hidden to some node is selected. Pretty simple, but I can not understand how to change the values of the hidden fields.
  
  Load the form, select "ItemA" and click on submit. Do not change the values of the hidden form fields. They are always "not defined". What is the correct syntax to change the value of the hidden field?
  
  
  

  The correct syntax is

  myForm.theID = 'theID = "+ valueString;

  Ken

• Remove or disable the duplication of value for the PDF form field

  Hello

  How can I remove or disable replication of field value in a PDF form? Say, if you enter the address on a single page, it is duplicated at the address on another page. For some reason whoever created this form, made a mistake of linking to the wrong field. Say so a management office address is bound to the address of the owner.

  We have acrobat 8 and the latest version X.

  Thank you

  Make sure that the fields do not have the same name.

• Validate the value of the text field

  Hello.

  I found this code:

  the value of power reactive

  var a = this.getField ("Name1");

  var two = this.getField ("Name2");

  var 3 = this.getField ("Name3");

  This feature assembles two field values into one with "and" as a separator.

  function concatFields (field1, field2, fieldDest) {}

  make sure that all variables are present

  If (Field1 & & Field2 & & fieldDest) {}

  var fieldVals = new Array();

  If (field1.value! = "& & field1.value! = null) {}

  fieldVals.push (field1.value);

  }

  If (field2.value! = "& & field2.value! = null) {}

  fieldVals.push (field2.value);

  }

  fieldDestResult = fieldVals.join ('and');

  fill the fieldDest only if it is empty

  if(fieldDestResult.value!=''|| fieldDestResult.value!=null) {}

  fieldDest.value = fieldDestResult;

  //}

  }

  }

  concatFields (one, two, three);

  These values to combine text two fields into one (text field nr.3) and put 'and' between the values. It works OK. But what happens if the two values are equal? Then, I need that one value is fill in field Nr. 3. Then. If the field 'Name1' and 'Name2' values are different, the two are combined in "Name3",... If the values are equal, the only one of them will be send to "Name3" on the ground.

  How can I do?

  Thanks for the reply.

  There is no coma have been a period should be. Be the soul of the last four lines:

  var Text1 = this.getField("Name1").valueAsString;

  var Text2 = this.getField("Name2").valueAsString;

  if(Text1 == text2) Text2 = "";

  Fill-in = Event.Value (Text1, Text2, "", "and");

  Additional code can be added to remove the distinction uppercase / lowercase and trim leading or white end space.

• SQL that are based on the values of the corresponding fields.

  Hi my name is Hawk.

  I'm new to the Forum, and I wanted to just introduce myself and say hi.

  I have a daunting task to summarize values and filling in a spreadsheet with columns. I have 600 lines to go, and I was wondering if

  someone knows a way in sql to sum (a body of numbers) based on the existence of a value being the same on another field of varchar2.

  For example, here is an example of the data table that I have.

  CREATE TABLE EXAMPLE

  ("FIRSTNAME", VARCHAR2 (20 BYTE),

  VARCHAR2 (20 BYTE) "LASTNAME."

  NUMBER OF "SUMVALUE."

  NUMBER OF "ROW_ID".

  );

  Insert into SAMPLE (FIRSTNAME, LASTNAME, SUMVALUE, ROW_ID) values ('Charlie', 'chocolate factory', 100, 1);

  Insert into SAMPLE values (FIRSTNAME, LASTNAME, SUMVALUE, ROW_ID) ('Johnny', 'Desire', 200, 2);

  Insert into SAMPLE (FIRSTNAME, LASTNAME, SUMVALUE, ROW_ID) values ('P', 'Frankenstein', 300, 3);

  Insert into SAMPLE (FIRSTNAME, LASTNAME, SUMVALUE, ROW_ID) values ("Charlie", "chocolate factory", 400, 4);

  Insert into SAMPLE (FIRSTNAME, LASTNAME, SUMVALUE, ROW_ID) values ("Charlie", "chocolate factory", 500, 5);

  and Yes, I have 600 lines having to ask and things to the top score on manually, it's just bs data...

  So what I do is the following.

  Write some sql that will total the number field (sumvalue) based on data with firstname = lastname = chocolate factory and Charlie.

  It seems so simple, but still I can not understand how do.

  Is that what I'm trying to make sense?  Also, I hope this is the right place to post this. I looked on this before I posted to make sure.

  Hawk.

  Hi, Hawk,

  Here's one way:

  SELECT SUM (sumvalue) AS total_sumvalue

  SAMPLE

  WHERE firstname = 'Charlie '.

  AND lastname = 'chocolate factory '.

  ;

  Welcome to the forum!

  There are those who use the forum for years and have not yet learned to post CREATES instructions TABLE and INSERT for their sample data, as you did.  Keep up the good work!

  You should also post the exact results you want from the data provided.  For example

  TOTAL_SUMVALUE

  --------------

  1000

  (this is what produces the query I posted).  As you can see, without that David and I came with 2 different interpretations of what you want and maybe aren't exactly what you need.

• How to filter records in a main query of RDF based on the values of the calculated fields

  Hello

  I'm working on a report of RDF, where I have my main request which has four fields.

  (1) the unique id for the field

  (2) numerical value 1

  (3) numeric value 2

  (4) numeric value 3

  I added a CF_Total of calculated field.

  The main query returns all the records, but I want to only show that these fields for which the CF_Total has a particular value.

  Can anyone help me about how to proceed.

  Concerning

  Hawker

  Hello Hawker,

  This is an example, how you can filter based on the formula column. I don't know exactly where you would use. And other related issues.

  Give the idea and example how you can start.

  Thank you

  Hamid

• Make a mandatory or optional field according to the value in the other field

  Hello
  
  I added a new location of the merchant class just under the name of merchant in the fresh details in iexpense page. I want to make this field option or required depending on the value selected in the field Type of expense.
  
  If Type of expense is like mileage so merchant should be mandatory otherwise in option.
  
  I found controller associated with this page is DetailsPageGlueCO and here is the code that I am trying to extend DetailsPageGlueCO.
  
  package oracle.apps.ap.oie.entry.lines.webui;
  Import oracle.apps.ap.oie.entry.lines.webui.DetailsPageGlueCO;
  Oracle.apps.fnd.framework.webui import. *;
  Import oracle.apps.fnd.framework.webui.beans.OAWebBean;
  Import oracle.apps.fnd.framework.OAException;
  
  SerializableAttribute public class XXDetailsPageGlueCO extends DetailsPageGlueCO
  {
  ' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)
  {
  
  super.processFormRequest (pageContext, webBean);
  
  Try
  {
  String ExpReportType = pageContext.getParameter ("ExpTypeChoice"); take the value of the list of ExpTypeChoice
  
  If (ExpReportType.toLowerCase () .indexOf ("mileage")! =-1) / / check if the value selected in the list ExpTypeChoice is of type mileage
  {
  Code to intercept the value in ExpTypeChoice list, and then newly added fact XXMerchantLocation required field?
  
  
  
  }
  } catch (System.Exception e)
  {
  throw new OAException ("you must enter merchant location");
  }
  }
  }
  
  Pls. suggest a piece of code in the section / / Code to intercept the value in ExpTypeChoice list, and then fact newly added XXMerchantLocation required field?
  
  Published by: yannick bigot on January 2, 2012 06:42

  Bigot,

  To make a required field on the selection, you must join a SPEL with the bean and make true or false based on your requirement.

  See article PPR of the developer's Guide.

  Kind regards
  GYAN
  www.gyanoracleapps.blogspot.com