Do 1 field equal to the value of the 2 fields.

Similar Questions

• How can I design square wave which has a positive and negative values equal to the other and separated from each other by controlled time or distance

  How can I design square wave which has a positive and negative values equal to the other and separated from each other by controlled time or distance, as indicated in the figure below. and enter this signal in a data acquisition.

  

  At the time wherever you go for the beautiful diadram, you could have done the vi

  Your DAQ would like a waveform (table of values and dt ak 1/sampling rate)

  If you set the sampling rate you know the length of the array, create a matrix of zeros and set the values of the two amplitudes...

  Because I don't want to connect other duties here are some photos

  And it does have a few drawbacks leaves to be desired in my solution, just think... rounding errors and what might happen if the tables are becoming more...

  

• Advanced search works only with verification of the equality of the sexes

  Hi all

  I don't know if this is something you can help me or if I'm missing something completely obvious.

  I have a 'advanced search form' which has a few options to check through for example age, city, nationality, etc. and I have two sets of records, one for the user who has the gender are stored in $SameGenderCheck

  And I have a SQL query for the search criteria for the search form.

  Here's the SQL statement:

  $query_search_res = "SELECT * FROM profiles LEFT JOIN profile_details ON profiles.profile_id = profile_details.profile_id WHERE (city = '$location') OR (ethnicity = '$ethnicity' OR nationality = '$nationality' OR marital_history = '$marital_history' OR height = '$height') AND (Age BETWEEN '$age_from' AND '$age_to') AND (gender != '$SameGenderCheck') AND (approved = 'Yes')";
  

  Thank you.

  > other search options are optional, so if they are entered, they will reduce more

  > down search results if they are not then simply use age and city.

  Okay, I think that it is actually the part that is causing problems for you. You want that all the criteria to NARROW your results.  You want to ethnicity, nationality, marital_history and the height to be optional criteria, so you have combined with the rest of the statement with a RC. But an OR condition will always expand results, not close. If you must change the first residence in one and. GOLD is used within the jurisdiction parens for these criteria are OK.

  $query_search_res = "SELECT * PROFILES LEFT JOIN profile_details ON profiles.profile_id = profile_details.profile_id WHERE (city ="$location") AND (ethnicity = nationality GOLD" $ethnicity"="$nationality"marital_history ="$marital_history"height GOLD GOLD ="$height") AND (age BETWEEN '$age_from' AND '$age_to') AND (sex!» (= «$SameGenderCheck») AND (approved = "Yes");

  But here's the problem; If the user has no entry for ethnic origin, nationality, the marital_history and the height of the criteria, no results will be returned. Regular SQL will not solve your problem. You can work around the problem by replacing the equality by the LIKE predicate operator and put a wildcard for users who do not have that criterion in their profile. But that works only for text fields, not digital, and I don't like.

  A better solution is to dynamically create the WHERE clause, remove the criteria of ethnicity, nationality, marital_history and the height of the WHERE clause if the user does not have these fields completed.

• Rows for which the final quantity is equal to the initial_quantity-1

  Hello
  
  I have a table with the following columns: account_id, country_code, initial amount, final amount, unit.
  For example:
  unit of measure final account_id country_code transitional amount
  EN 1 5 1 555
  EN 6 8 1 555
  EN 11 12 1 555
  
  I want lines that the final amount is equal to the initial_quantity-1.
  
  For this, I have the following query
  Select a.country_code,
  a.account_ID,
  a.initial_quantity,
  a.final_quantity,
  a.Unit,
  of tableX one
  inner join tableX b
  on a.final_quantity + 1 = b.initial_quantity and a.unit = b.unit
  where
  and a.country_code = b.country_code
  and a.account_id = b.account_id
  
  Run the query, the result is
  EN 1 5 1 555
  
  But I want it to appear also row:
  EN 6 8 1 555
  
  Because I want to eventually merge this in one line
  EN 1 8 1 555
  
  Any ideas?
  
  Thanks in advance.
  
  Kind regards

  Hi Frank,.

  I'm not sure that you can count on:

  ORDER BY initial_quantity

  Original quantity can be not necessarily increase or decrease. It can be both:

  initial final
  ------- -----
  1       5
  3       4
  6       2
  11     12
  

  Then LAG/LEAD will not work:

  INSERT INTO tablex (account_id, country_code, initial_quantity, final_quantity, unit)
         VALUES         (555,     'FR',           1,          5,           1);
  INSERT INTO tablex (account_id, country_code, initial_quantity, final_quantity, unit)
         VALUES         (555,     'FR',           6,          2,           1);
  INSERT INTO tablex (account_id, country_code, initial_quantity, final_quantity, unit)
         VALUES         (555,     'FR',           3,          4,           1);
  INSERT INTO tablex (account_id, country_code, initial_quantity, final_quantity, unit)
         VALUES         (555,     'FR',           11,          12,           1);
  INSERT INTO tablex (account_id, country_code, initial_quantity, final_quantity, unit)
         VALUES         (555,     'DE',           1,          2,            1);
  INSERT INTO tablex (account_id, country_code, initial_quantity, final_quantity, unit)
         VALUES         (555,     'DE',           3,          5,            1);
  INSERT INTO tablex (account_id, country_code, initial_quantity, final_quantity, unit)
         VALUES         (555,     'DE',           6,          8,            1);
  INSERT INTO tablex (account_id, country_code, initial_quantity, final_quantity, unit)
         VALUES         (555,     'DE',           11,          12,           1);
  COMMIT;
  
  SQL> select * from tablex
    2  /
  
  ACCOUNT_ID COUNTRY_CODE INITIAL_QUANTITY FINAL_QUANTITY       UNIT
  ---------- ------------ ---------------- -------------- ----------
         555 FR                          1              5          1
         555 FR                          6              2          1
         555 FR                          3              4          1
         555 FR                         11             12          1
         555 DE                          1              2          1
         555 DE                          3              5          1
         555 DE                          6              8          1
         555 DE                         11             12          1
  
  8 rows selected.
  
  SQL> WITH   got_grp_start AS
    2  (
    3   SELECT account_id, country_code, initial_quantity, final_quantity, unit
    4   , CASE
    5     WHEN  initial_quantity =
    6           LAG (final_quantity) OVER ( PARTITION BY  account_id
    7                      ,      country_code
    8           ,  unit
    9           ORDER BY initial_quantity
   10         ) + 1
   11     THEN  0
   12     ELSE  1
   13    END AS grp_start
   14   , CASE
   15     WHEN  final_quantity =
   16           LEAD (initial_quantity) OVER ( PARTITION BY  account_id
   17                         ,         country_code
   18              ,     unit
   19              ORDER BY    initial_quantity
   20            ) - 1
   21     THEN  0
   22     ELSE  1
   23    END AS grp_end
   24   FROM tablex
   25  -- WHERE ...  -- Any filtering goes here
   26  )
   27  SELECT account_id, country_code, initial_quantity, final_quantity, unit
   28  FROM got_grp_start
   29  WHERE grp_start = 0
   30  OR grp_end  = 0
   31  ;
  
  ACCOUNT_ID COUNTRY_CODE INITIAL_QUANTITY FINAL_QUANTITY       UNIT
  ---------- ------------ ---------------- -------------- ----------
         555 DE                          1              2          1
         555 DE                          3              5          1
         555 DE                          6              8          1
  
  SQL> 
  

  I think that hierarchical query may be a better approach:

  SELECT  DISTINCT *
    FROM  tablex
    START WITH ROWID IN (
                         SELECT  a.ROWID
                           FROM  tablex a,
                                 tablex b
                           WHERE b.account_id = a.account_id
                             AND b.country_code = a.country_code
                             AND b.unit = a.unit
                             AND b.initial_quantity = a.final_quantity + 1
                        )
    CONNECT BY NOCYCLE account_id = PRIOR account_id
                   AND country_code = PRIOR country_code
                   AND unit = PRIOR unit
                   AND initial_quantity = PRIOR final_quantity + 1
    ORDER BY account_id,
             country_code,
             unit,
             initial_quantity
  /
  
  ACCOUNT_ID COUNTRY_CODE INITIAL_QUANTITY FINAL_QUANTITY       UNIT
  ---------- ------------ ---------------- -------------- ----------
         555 DE                          1              2          1
         555 DE                          3              5          1
         555 DE                          6              8          1
         555 FR                          1              5          1
         555 FR                          3              4          1
         555 FR                          6              2          1
  
  6 rows selected.
  
  SQL> 
  

  SY.

• Are the Photos and videos uploaded (iCloud Photo Sharing) equal to the (ios iphoto reviewed)? If not, what is the new equal to that? If so, can I organize the layout as I wish? can I convert (iphoto ios log backup) to the file (iCloud Photo Sharing)?

  I always use the ios 7 because I like my reviews of iphoto, ios 8 and after don't support is not iphoto, I intend to upgrade to the latest version of ios. so my question is:

  Are the Photos and videos uploaded (iCloud Photo Sharing) equal to the (ios iphoto reviewed)?

  -If so, I can arrange the provision in the way I want? What happens if you want to convert my old (iphoto ios log backup) to import (iCloud Photo Sharing) that it is?

  -If not, what is the new equal to that with the possibility of transferring these journals?

  Thank you

  No they are not really the same thing and you can't convert one to the other. When / if you update, you will simply lose your logs. You cannot influence other available photos of the order appear in

• The limit of the device must be less than or equal to the limit of life cycle license in first cisco 2.2

  Hi all

  I have seen under error in the tool main 2.2 Cisco infrastructure

  The limit of the device must be less or equal to the limit of license of life cycle and also secondary device ISE inaccessible since premium.

  Could you please suggest how we can solve your problem.

  Thanks in advance...

  Kind regards

  Sachin

  Yes. Life cycle license are by smart device managed. See this page for a good overview:

  http://www.Cisco.com/c/en/us/support/docs/cloud-systems-management/Prime...

  .. as well as this page:

  http://www.Cisco.com/c/en/us/products/collateral/cloud-systems-Managemen...

  .. who States:

  Life cycle license: allows access to all the features of the life cycle, which includes the configuration of the devices, image management software, basic health and performance monitoring, fault management, troubleshooting and customer visibility on the network. The license of the life cycle is based on the number of managed devices. Life cycle of the licenses are available in sizes from package of 25, 50, 100, 500, 1000, 2500, 5000, 10,000 and 15 000 devices and can be combined as needed to reach a total number of device under license.

  A device is uniquely identified through the assigned IP address and system object ID (SysOid). Routers, switches, light/unified access points and network first Cisco (NAMs) analysis Modules are charged on the number of licenses. If a switch stack is managed via a single IP address, it counts as a single device. A single frame will, however, be counted as multiple devices if the chassis is configured with several IP addresses. For example, a switch with several service cards, such as a firewall and so forth, or a stackable switch with an IP address assigned to each switch who is involved in the stack is considered multiple devices within the first Cisco Infrastructure. Cisco Wireless LAN controllers (WLCs), autonomous and peripheral access points third are not counted against the number of licenses.

  When you have more devices that licenses, you will receive the error see you and prevented from adding additional devices to your inventory.

  We see it more often when it is light (i.e. not independent) APs are added to a wireless controller. PI will not prevent the new APs to be added, they are managed under their association with the WLC. However, if you try to add a new switch it would prevent you to do until the deficit of licenses has been sent.

• Need to obtain equal records the number of days of the month.

  Dear all

  My table and its data is given:

  Table name: Transaction_Master

  Trn_Num	Trn_Dte
  1	January 2, 2014
  2	January 3, 2014
  3	February 15, 2014
  4	December 29, 2013
  5	December 30, 2013
  and so on

  Now, I wish that my query must return equal records the number of days for each month of Trn_Dte. Be careful, I don't have Trn_Num column in my result. Its cities here only for explanation.

  It should, for example, records 31 to January 31 to December and 28 February.

  I tried following query but it passes loop and my db session gets hang.

  With T as

  (

  Select Distinct (Trn_Dte, 'Month') To_Char Trn_Mon, To_Number (To_Char (Last_Day (Trn_Dte), 'DD')) Tot_Day

  Of Transaction_Master

  Where Trn_Dte between parameter_1 and PARAMETRE_2

  )

  Select Distinct Trn_Mon, level

  T

  Connect by level < = Tot_Day

  Order By Trn_Mon, level

  Could you give me a solution for this case?

  Another solution for your exact needs. Try this and let me know in case of any problems. Because I changed the connection by the clause double itself.

  SELECT DISTINCT TRUNC (Trn_Dte, 'MY') + (lvl - 1)

  OF Transaction_Master aa (SELECT LEVEL lvl

  OF the double

  CONNECT BY LEVEL<= 31)="">

  WHERE Trn_Dte<= to_date('15-feb-2014','dd-mon-yyyy')="" ---="" add="">

  AND TO_CHAR(Trn_Dte,'MON') = TO_CHAR (TRUNC(Trn_Dte,'MON') + (lvl-1), 'MY');

• Images alerts equal to the size of the doc.

  HI forum,

  Baby script to script.

  I have a script which will alert you if the last frame size [RECTANGLE] is equal to the height and width of the document...

  I really need a help from you, to check, IF ALL of THE CHASSIS, IS EQUAL to WIDTH AND HEIGHT OF the DOCUMENT.  [not only the last item] and ALERT...

  var doc = app.documents [0];

  REC = doc.rectangles.lastItem ();

  rectHeight = Math.round (rec.geometricBounds [2] - rec.geometricBounds [0]);

  rectWidth = Math.round (rec.geometricBounds [3] - rec.geometricBounds [1]);

  If (rectHeight = Math.round (app.activeDocument.documentPreferences.pageHeight) & &)

  rectWidth is Math.round (app.activeDocument.documentPreferences.pageWidth))

  rec.itemLayer = doc.layers.itemByName (layerName);

  Alert ("FRAME SIZE IS CORRESPONDING to DOCU. SIZE');

  Thank you

  anthkini

  Hello

  Change this line:

  if( Math.round(scalW) == Math.round(app.activeDocument.documentPreferences.pageHeight) ) {
  

  Jarek

• less than or equal to the loop condition

  Hello
  
  What do you prefer, what's the most common one is more easily readable, less or equal in the loop condition?
  

  for (int i = 0; i < arr.lenght; i++){..}
  //or
  for (int i = 0; i <= arr.lenght - 1 ; i++){..}

  I know it's basic programming and nothing to do with Java, so if this forum is not for this, could you please suggest a general programming forum?
  I would really appreciate that I have a lot of General questions :)
  
  Thanks in advance,
  lemonboston

  lemonboston wrote:
  Hello

  What do you prefer

  Personal preferences, which is useless for you

  which is more common,

  From the years of reading code open source, the first

  one who is more easily readable, less or equal to the loop condition?

  Personal opinion, which is useless for you

  I would really appreciate that I have a lot of General questions :)

  If you don't want to think about yourself (which you should do instead of asking general questions), just lazily attack. The two examples reach exactly the same, but the first is less to type and read.

• If y of an object is equal to the implementation of an another mc

  Hey guys, looking for the correct way to fix this. Therefore, this under works. But rather than use the coordinate y of the wst, wsa and wsm, is it possible that it is equal to the mc's? Yes wsa1.y iswsablank3 (mc)

  function completed8(e:DisplayObject):void {}

  ATM

  If ((wsa1.y==wsablank3.y || wsa2.y==wsablank3.y || wsa3.wsablank3.y) & & (wst1.y == wstblank5.y | wst2.y == wstblank5.y | wst3.y == wstblank5.y | wst4.y = wstblank5.y | wst5.y == wstblank5.y) & & (wsm1.y == wsmblank1.y)) {}

  hints.A2.Visible = true;

  } else {}

  hints.A2.visible = false;

  }

  }

  The property is a numeric property.  An object is not a digital object, unless it is a variable number.  You can't compare the digits of numbers not if that's what yopu arise.

• Check box if the numeric field is equal to the value

  Newbie needs help!

  I am writing a script to check a box, but only after a numeric field adds up to "4".

  If you look at my attachment, "Student 1" has four check boxes (skills before the course, courses, etc.).  Each time that these boxes are checked/unchecked, the numeric field + or - 1 for the rawValue.  The script that I have problems with is on the box next to student 1...

  Here's the script of 'calculate' attached to this box:

  If (stu1_results.rawValue == 4) {}

  CheckBox_stu1.rawValue = true; Select the check box

  else {}

  CheckBox_stu1.rawValue is false; Clear the check box

  }

  Any advice would be great!

  Mike Schaefer

  (blinkyguy)

  There were two things wrong with your code. Logically, it was fine, but you have been mixing an entitled, declaration of the NTS and a comparison. In an if statement if you wantt o compare two values that you need two equal signs. If you want to assign a value to another, you need a single equal sign. Who was number one. The second is when you assign the value of the checkbox. The power values are 1/0 not true/false. So, you can either modify your code to assign a value of 1/0 instead of true/false or modfiy the box to the true/false as values instead of 1/0.

  The code should look like this:

  If (stu1_results.rawValue == 4) {}

  CheckBox_stu1.rawValue = 1;

  } else {}

  CheckBox_stu1.rawValue = 0;

  }

  Paul

• Pop-up alert if the value is not equal to the other element.

  Hello
  
  I need a pop-up alert if the value of P1_ITEM_A is not equal to with P1_ITEM_F
  
  
  I HAVE 6 point
  
  

  P1_ITEM_A
  
  P1_ITEM_B
  P1_ITEM_C
  P1_ITEM_D
  P1_ITEM_E
  P1_ITEM_F
  
  mY FORMULA IS
  
  P1_ITEM_A =13
  
  P1_ITEM_F =1*:P1_ITEM_B+2*:P1_ITEM_C:+3*:P1_ITEM_D+4*:P1_ITEM_E
  
  Ex : P1_ITEM_A =13
  
  1*2+2*2+3*1+4*1
  
  After Calculation value Comes into P1_ITEM_F =13

  I need a pop-up warning when, after calculation of value of P1_ITEM_A! = P1_ITEM_F like 13 = 15
  
  then see the me a pop up window with massage please enter cotrrect not.
  
  
  
  How can I do that.
  
  Published by: 805629 on March 9, 2011 04:15

  Add an onblur = "calcItems()"; at one point then or modify the 'onchange' to "onblur" event hook

• Select the value equal to the table

  I use Dreamweaver CS5 with PHP and a MySQL database.  I'm reading from a table (states []) in the database that list all States an entrepreneur might work to, that is, WA, ID, OR... my record of the insert is savaing my table with the abriviations of State with the coma in the meantime without space, which is fine with me.  My code for the insert recording is:

  If (isset($_POST['states'])) {}

  $_POST ['States'] = implode (',', $_POST ['states']);

  } else {}

  $_POST ['States'] = null;

  }

  To test what must be my result, I tried to hard-code the value for area WA selection that selects the WA (Washington) very well in the dynamic list/Menu. The checkbox allow multiple selections is selected for this list/menu.  When I try to hardcode several States like WA, ID, nothing is selected.  I also tried selecting WA ID and WAID.  What is the correct format of the select value equal to in order to select multiple items.

  Once the coding is figured out I was going to try to understand how to navigate in PHP and do select dynamically recording and echo (or otherwise print) in the right format for several States in the table would be selected.  However, if anyone out there has a sample, that would be great.

  Thank you in advance for your help!

  Darren

  First and perhaps that I read it wrong, but 'implode' in your example should not "explode" because you have the array, but you want to get the values out of it?

  Now I know that my next suggestion is not what you want to hear, but I used to think like you and store things in a table, a table in a loop and then try to check the loop if some values exist.  However, as time has taught me it is not necessarily the best way to store values you need for this type of proceeding.  Most of the time in cases like this, your username will seek entrepreneurs in a specific State.  So what I recommend is to create another table with 2 columns:

  contractor_id (a way to identify the contractor, it will be a primary key, which will connect a key for the "contractor_id" in your original table)

  contractor_state (this allows to link an id to a State)

  A single loop would be to query the status of the contractor, the contractor ID is filled and you can run a join to remove the door contractor while the ID condition is met.  The flip side is to get all the contractor IDs meet the criteria of the State.  You must perform a JOIN on the request to combine the original with this new table table if you want to remove the name of the contractor as well as the State didn't give one example.

  Perhaps a good article that you want to read is the first response of this StackOverflow question and the link in the response are talking about standardization and serialization of data:

  http://StackOverflow.com/questions/1790481/PHP-MySQL-storing-array-in-database

• SUMIF line is equal to the value of test and the line below is '-'

  Hello

  I have a spreadsheet numbers where a column has a list of names that are mixed with rehearsals and another column that has a value of profits to this name list.

  Now, I want to determine the total profits from each of the names so I can see the total profit by name.

  That part is easy, I just a SUMIF function that checks if the name corresponds to a specific name, and then adds the benefit altogether.

  The problem I have is that in the names column, sometimes I'll have a name and then the next rows are just '-' indicating that they are of the same name. The SUMIF function that I use does not takes into account these values because they obviously do not match the name of the interest.

  So my question is: is it possible to create a function that will check for a matching name and then if the next line '-', then add this value to the total as well. It has to work with several rows of '-' after the name.

  The screenshot below is an example of what I mean because I realize that it does not have much sense.

  

  So in this case, the total of Jess profit would be = 5 + 35 + 15 + 5 + 15 = 75

  and the benefit of Gill = 30 + 30 + 20 + 40 = 120

  I hope I did it is clear enough. Thank you in advance!

  Oscar

  Hi Oscar,.

  Although it is possible to do, it will be a little clumsy, involving additional columns. It would be much easier to stop using the "-" and use the actual names instead. Order the popup format to create a list that makes it easy to list the names.

  Quinn

• Assign a spacing equal to the fields in the horizontal field Manager

  Hello

  I add a number of vertical field managers to a horizontal field Manager. Each manager of vertical field has a text with an image under. The text varies in width images in each vertical field Manager seem to have a different amount of space between them. Is there a way to remedy this situation? Joined a raw image in the way that message on the screen. How can I get the same amount of space between each area of the rectangle?

  Thank you

  

  Here's some code that I received from one of the sessions at the last DevCon.  Should be useful.  Might help explain customer managers too.

  /*
   * EqualSpaceToolbar.java
   *
   * Research In Motion Limited proprietary and confidential
   * Copyright Research In Motion Limited, 2009-2009
   */
  
  import net.rim.device.api.ui.*;
  
  public class EqualSpaceToolbar extends Manager {
  
      private static final int SYSTEM_STYLE_SHIFT = 32;
  
      public EqualSpaceToolbar() {
          this( 0 );
      }
  
      public EqualSpaceToolbar( long style ) {
          super( USE_ALL_WIDTH | style );
      }
  
      protected void sublayout( int width, int height ) {
          int numFields = getFieldCount();
          int maxHeight = 0;
  
          // There may be a few remaining pixels after dividing up the space
          // we must split up the space between the first and last buttons
          int fieldWidth = width / numFields;
          int firstFieldExtra = 0;
          int lastFieldExtra = 0;
  
          int unUsedWidth = width - fieldWidth * numFields;
          if( unUsedWidth > 0 ) {
              firstFieldExtra = unUsedWidth / 2;
              lastFieldExtra = unUsedWidth - firstFieldExtra;
          }
  
          int prevRightMargin = 0;
  
          // Layout the child fields, and calculate the max height
          for( int i = 0; i < numFields; i++ ) {
  
              int nextLeftMargin = 0;
              if( i < numFields - 1 ) {
                  Field nextField = getField( i );
                  nextLeftMargin = nextField.getMarginLeft();
              }
  
              Field currentField = getField( i );
              int leftMargin = i == 0 ? currentField.getMarginLeft() : Math.max( prevRightMargin, currentField.getMarginLeft() ) / 2;
              int rightMargin = i < numFields - 1 ? Math.max( nextLeftMargin, currentField.getMarginRight() ) / 2 : currentField.getMarginRight();
              int currentVerticalMargins = currentField.getMarginTop() + currentField.getMarginBottom();
              int currentHorizontalMargins = leftMargin + rightMargin;
  
              int widthForButton = fieldWidth;
              if( i == 0 ) {
                  widthForButton = fieldWidth + firstFieldExtra;
              } else if( i == numFields -1 ) {
                  widthForButton = fieldWidth + lastFieldExtra;
              }
              layoutChild( currentField, widthForButton - currentHorizontalMargins, height - currentVerticalMargins );
              maxHeight = Math.max( maxHeight, currentField.getHeight() + currentVerticalMargins );
  
              prevRightMargin = rightMargin;
              nextLeftMargin = 0;
          }
  
          // Now position the fields, respecting the Vertical style bits
          int usedWidth = 0;
          int y;
          prevRightMargin = 0;
          for( int i = 0; i < numFields; i++ ) {
  
              Field currentField = getField( i );
              int marginTop = currentField.getMarginTop();
              int marginBottom = currentField.getMarginBottom();
              int marginLeft = Math.max( currentField.getMarginLeft(), prevRightMargin );
              int marginRight = currentField.getMarginRight();
  
              switch( (int)( ( currentField.getStyle() & FIELD_VALIGN_MASK ) >> SYSTEM_STYLE_SHIFT ) ) {
                  case (int)( FIELD_BOTTOM >> SYSTEM_STYLE_SHIFT ):
                      y = maxHeight - currentField.getHeight() - currentField.getMarginBottom();
                      break;
                  case (int)( FIELD_VCENTER >> SYSTEM_STYLE_SHIFT ):
                      y = marginTop + ( maxHeight - marginTop - currentField.getHeight() - marginBottom ) >> 1;
                      break;
                  default:
                      y = marginTop;
              }
              setPositionChild( currentField, usedWidth + marginLeft, y );
              usedWidth += currentField.getWidth() + marginLeft;
              prevRightMargin = marginRight;
          }
          setExtent( width, maxHeight );
      }
  
  }