Keyboard does not recognize long typing

Similar Questions

• Satellite M40X-189 - keyboard does not work - long beep consisten

  Hello world

  Thanks in advance for any help provided.
  I have a laptop Toshiba Satellite M40X-189.

  The problem is that the keyboard does not work, and it beeps long consistent. I have to press the keyboard for him to stop, when I get loaded in Windows, the touchpad is ok but I can't type anything with the keyboard. I checked the connection on the keyboard and it went ok.

  Is it possible that the computer tells me that the keyboard is down and replacing it will fix both problems?

  I don't want to spend money on a new keyboard for the same thing happen after installation.

  Anyone who can help me with this problem?

  Thanks again for any help provided.

  In my opinion it looks like a defective keyboard, and I think that a new keyboard to solve this problem.
  External keyboard works on your laptop?

  So in your case I would swap the keyboard.
  In addition, you can contact the nearest ASP and ask for help. Technicians can swap the keyboard for you and order a new one.

  Good luck!

• @ Key keyboard does not when you connect on PC

  When I try to connect to a Windows 7 PC with password home@2015 the keyboard does not recognize the @ key and I have to use shift2 instead.

  Once I'm connected to the PC the @ key works only fine no problem at all.  It is only when you connect what happens.

  I checked keyboard settings and they are correct and the same as any other PC that all work properly.

  I don't know what else to check if anyone can help please.

  All sorted now.  This is the registry which has been set at US UK No.  This was changed and notation in a work properly.

• Pavilion HPE h8 1103nl does not recognize the keyboard & mouse

  After 10 days of installation, copy and all that kind of stuff that comes with a new PC, everything worked, and finally, I put everything in place, put the wires out of sight and all. Of course, I had to sign a few things, and somewhere in the process of electricity is out. Well, the PC was off anyway (at least I thought it was. I also changed the USB port to which the keyboard and mouse were attached. When I turned on the computer, I had a "keyboard" error, could not start (because electricity had come off the coast), but as the PC does not recognize the keyboard or the mouse, I was unable to give a or something.

  Keyboard and wireless mouse tried again, also under the old, but that didn't work.  Tried to reconnect, but in vain.

  Now what can I do?

  Hi HardBeatZ

  Thans for your answer!

  I found the solution, after trying and try... but could not find my ad more (duhhh), so thanks for the answer!

  Apparently I did ' t hold the button "connect" quite a long time to make a new connection... :-(

  Everything works fine now... Thanks again!

  Mijni

• Apple TV does not recognize the Apple wireless keyboard

  My Apple TV (4th generation) does not recognize the wireless Apple keyboard I want to make a pairing.  All my other devices (Mac, iPhone and iPad) recognize the keyboard.  This should be done automatically on the Apple TV, but it's not.  The Apple TV has acknowledged the Apple TV remote and paired with her.  Any help would be appreciated.

  Thank you

  Ken Templin

  I paired a non-Apple clone keyboard and it was somewhat capricious. You go to the remote controls and devices-> Bluetooth, enable matching on the keyboard, and it should appear in 'other devices '. You select and enter the number to validate. It requires no tvOS 9.2.

• PC does not recognize the cards inserted media or devices connected to the usb any longer.

  Recently, I noticed that XP Pro does not recognize storage devices of media inserted in the usb slots.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  The following articles might help you solve this problem.

  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

• Vista does not recognize external hard drive (LONG!)

  I bought a Terrabite Cavalry USB Mass Storage 1 unit some time around January 2009. We used it to back up my computers portable wife and daughters without any problems (it was Windows XP a Windows Vista). Shortly after, we have tried to back up my desktop computer, also running Windows Vista, but my computer does not recognize the drive into any USB port. After this attempt, we get is more willing to work on any computer. We contacted the cavalry and they replaced the drive, but we lost a lot of data since most of the files saved on my wife and daughter desktops have been deleted to clean up their hard drives.
  When I received the spare drive I backed up my computer with no problems.
   
  We moved from NC to PA in August of last year and had packed the new car. Recently, we unpacked and used to transfer ALL the photos of my wife, numbering several hundred, again with no problems. In addition, she has saved his computer using the Vista utility. Today, I made the horrible mistake of trying to back up my computer using the same player. I had completely forgotten the previous question. Yet once, my computer did not recognize the drive, any USB port used or on the tabs 'computer '. When the drive is plugged in and turned on, it will be not even allow us to display the elements on the tab 'computer '.
   
  And now, just as before, the player no longer works on my wife's computer either. THIS IS AN ESSENTIAL QUESTION! If we cannot access the drive over 500 photos of our family, covering more than 5 years are lost forever!
   
  Although I've read similar questions on this site (especially in regards to Windows XP) I can't find the one that is exactly the same problem as this.
  There is nothing wrong with my computer. Each USB port works fine. I tried other USB devices with no problems of any kind.
   
  On both computers, if you connect the external drive and the power up it starts with a light blue on the front as it is supposed to. He then became red and Windows makes the normal audio alert, as it does with any USB device plugged. On the bar, the new icon 'Remove hardware safely', says but clicking on that alone causes the computer to get ung place intil the drive is unplugged. The same is tru if we try to access the tab "Computer" in the Start Menu. The computer attempts to load the itms 'Computer' but never the completion of the task. THE TWO COMPUTER DO EXACTLY THE SAME THING! My wife uses a Dell with Vista Home Premium and I use an EMachine with Vista Home Basic. And this issue seems to happen only after using his computer to mine, not the other way around because I had done a backup on thise drive when I got last year and she just did a new now on his own.
  I wrote to the Cavalry, but received no response. They said the last time that they aren't able to recover lost data, and it is said that all over their site.
  The external drive is a cavalry model # CAXP3701PA.
  Someone please help! Pictures of our last five years (including photos of my wife of his precious Golden Retriever from puppy to now) are lost if we cannot solve this problem. It seems that the player works well, but something corrupting of the software driver. We tried again to my wife's computer o and it begins with "Download driver software for device" but then what I described before using it.
  Any suggestions would be greatly appreciated.

  Hello

  Put the disc in a real store of the computer (not the leeks and the glances at a Best Buy or other stores)
  and they can remove the drive from the case and put it in another computer to back up data
  to other media. Of course this cancels any warranty and may not work if the drive has probably
  in fact failed. Data can often be recovered since a failed drive while it's expensive.

  (The drive could be put in either your PC as a 2nd drive).

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7 does not recognize any keyboard, except the v1.0 of MS natural ergonomic Keyboard 4000 defective

  I have a very strange problem.

  I have a desktop computer Windows 7 64-bit edition, all of a sudden about a third of the keys on my Microsoft Keyboard stops working.

  So, I bought a new generic keyboard.

  The problem

  1. If I plug the natural ergonomics MS Keyboard 4000 v1.0-it recognizes the keyboard, BUT it does not recognize one of the buttons on the left and right of the keyboard.

  2. If I plug any USB keyboard or a Bluetooth keyboard on it - it does not recognize.

  However, the Bureau will recognize any wired (USB) or mouse wireless (bluetooth) connected.

  It baffles me that the bureau will recognize a usb or bluetooth mouse mouse - but that it will not recognize the bluetooth keyboard or a usb keyboard.

  I tried many things

  1. connect the USB and Bluetooth keyboards in my laptop and check that they work properly. -They are.

  2. I tried using different USB ports on the desktop. He has not made a difference.

  3. my computer allows you to access its bios using F8 - I checked that my material was grateful the Generic USB keyboard before loading Windows. (I could select F8 and bring up the desktop in mode of Bios Configuration).

  4. I tried to start Windows in safe mode. That did not help at all.

  Any help would be greatly appreciated.

  Hello Pauliw,

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause in order to solve the problem permanently.

  You can try the steps in the following Microsoft article and see if it works for you.

  Troubleshoot keyboard

  Note: There is place for Windows 7 also.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  If the problem persists, try to remove all of the ghosts of your computer devices and then try to use the device. You can see the steps below.

  1. Click Start

  2. In the Search box, type command prompt .

  3. In the list right click on command prompt and select run as administrator.

  4. At a command prompt, type the following command and press ENTER:
     Set devmgr_show_nonpresent_devices = 1

  5. IN the following line from the command prompt, type the following command and press ENTER:
     Start devmgmt.msc.

  6. When the Device Manager opens, click on view

  7. Now, click Show hidden devices.

  8. Remove all the entries that exist for the keyboard and the USB category.

  9. Close Device Manager , and then restart your computer.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• After you have installed Windows 10, I can no longer create a PDF of my program Pagemaker 7.0.1. Purchased Acrobat DC, but not joy. Apparently, Acrobat PDF maker does not recognize the .pmd extension. I get errors and various suggestions, but nothing work

  After you have installed Windows 10, I can no longer create a PDF of my program Pagemaker 7.0.1. Purchased Acrobat DC, but still no joy. Apparently, Acrobat PDF maker does not recognize the .pmd extension. I get errors and various suggestions, but nothing works. WHAT?

  Print to Adobe PDF? Why the * & ^ * & ^ V_ $ didn't pay a lot more money to Adobe for an Adobe program that does not work with another Adobe program? Oh, right--they want to move me up (buy) the new Adobe graphics programs. I'll keep sweating this point and will no doubt wind up forking over a thousand$ $$ or so for 'new' stuff I don't need.

• Firefox does not recognize my keyboard

  My main advice was walked across my little puppy and now I can't type anything in Firefox. The keyboard works with other programs, however. I've uninstalled and reinstalled twice reset Firefox and disabled add-ons, all sorts of things that the internet has proposed. Help, please! I love Firefox and don't want to have to switch browsers.

  Some have reported that one or more times by pressing F9 + Windows has worked to solve problems with the keyboard does not.

  Windows remembers the setting by application keyboard layout and you have probably changed the keyboard by accident via a keyboard shortcut.

  • http://Windows.Microsoft.com/en-us/Windows7/the-language-bar-overview The language bar (overview)

• iMac restart and does not recognize usb-keyboard... freezes black screen with white bar tape

  Does anyone know this problem?... reboot does not work, usb keyboard does not work and the screen freezes...

  

  What version of Mac OS X is installed on the computer?

• I recently had a new hard drive installed in my 2008 iMac. I'm trying to re - install office and the computer does not recognize my password. I tried all the passwords I can think of and nothing works and it wont let me continue

  I recently had a new hard drive installed in my 2008 iMac desktop computer, because right now I can't afford a new computer.   I am now under OS X El Capitan 10.11.4 and my password no longer works so that I can reinstall office microsoft for Mac.  I'm trying to change my password, but you must enter the old password and it does not recognize the password.  I tried every password I use and nothing works.  How can I change or get a new password?

  Reset the password.

  OS X 10.7 Lion, Mountain Lion, Yosemite 10.9 10.8, Yosemite 10.10 and 10.11 El Capitan

  Shut down the computer.

  Start the computer, and then press on and hold the command key and the R key to boot from the recovery partition.

  When you see the Apple logo, release the keys.

  Wait until the OS X Utilities window appears.

  Move the mouse pointer to the bar menu at the top of the screen, click on "Utilities" and select "Terminal".

  in the menu dropdown.

  Terminal window is displayed.

  TypeRegeditdans resetpassword and press enter on the keyboard.

  Reset Password Utility window will open.

  Leaving the Terminal.

  Select Macintosh HD, if not already.

  Select the user account in the menu popup box under "Select user account.

  Enter a new password.

  Re-enter the new password for the user.

  Enter a hint.

  Click on the Save"" button.

  Click  in the menu bar, and then select restart.

  Open a session.

  When Keychain dialog box appears, select "create new keychain".

• Keyboard does not work on my T650-1MC Satellite

  Keyboard does not work no more at all. Instead of this, continuously + is typed in a text field (or insert permanently, if NUMLOCK is turned off). A USB keyboard works very well (keys CAPSLOCK on the USB keyboard allows to activate the light on the laptop keyboard), but the continuous + s persist.

  ALT + tab does not work, and clicking on stacked items on the system tray or. Windows just appear and disappear again.

  The touchpad works always intended to lead the mouse around, but the "tap to click on ' and 'slide your finger on the edge of the mouse wheel' functions no longer work.
  Thx for any help

  This model of laptop is not known to me, but after reading your ad I think the keyboard is defective and must be replaced. I mean what else you can do about it.

  Try to get the new keyboard and replace it. After that it all will again be OK.

• G780 keyboard does not work, but ONLY if the Elan Touchpad driver is installed.

  I have a bad surprise today--unlike other manufacturers, which offers one year free tech support, Lenovo does not. $179 for a contract or $89 to cover an isolated incident. Thank you, guys. :-/

  Here's my problem.

  G780, bought last October. Upgrade to Win7 Home Premium Win8 Pro.

  A few days ago the integrated keyboard has stopped working. It works in the BIOS, but when you start in Windows, Windows does not recognize it.

  There is a PS/2 keyboard driver and device keyboard HID that appear in Win8 Device Manager. I guess these are the drivers for the built-in keyboard. If I plug in a USB keyboard, it appears in the device as an additional device keyboard HID Manager.

  By trial and error, I discovered that the keyboard still works fine when the Elan touchpad driver is not installed. The problem with THAT: I can not disable the touchpad unless the driver is installed, and if the touchpad is not disabled, it will screw me up because I accidentally brush my hand against the touchpad while typing.

  I also noticed that sometimes the touchpad in the system tray icon with a WARNING icon overlaid on top of it (you know, the little yellow triangle with exclamation point). I can't understand why, and I can't understand what has changed on my computer that caused the keyboard to stop functioning properly.

  I tried uninstalling the Elan touchpad driver, download the latest driver from support G780 web page and put it back. No luck.

  I make do with a USB keyboard at the moment, but I really need this problem is resolved.

  Thanks in advance.

  So I had uninstalled the drivers of momentum earlier... yesterday I tried to reinstall those supplied with the computer.

  At least the keyboard worked now, but the drivers have not been properly disable the touchpad when I plugged the mouse.

  Then I hit Fn - F6, not really thinking that he would do anything, but it fixed the problem.

  I would have but the pilot would have overridden some setting I put with Fn - F6, but... maybe not.

  Problem solved.

• Why am I suddenly "USB not recognized, one of the devices USB has malfunctioned and Windows does not recognize"

  Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...

  I'll try not to waffle too guys, so here's...

  Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).

  But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."

  After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(

  A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
  The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
  Tried a system restore
  Tried to reinstall itunes

  When I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.

  Thank you comrades, cordially, Freddy frustrated. :)

  Another said I should go to Device Manager, uninstall all the USBs and restart.

  Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.

  I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).

  Is the charge of the iPhone when it is connected to the USB port (I don't think)?  This happened to me recently, but a reboot fixed it.  I guess that that happened to you.

  I guess that you don't see the error messages in Device Manager or you must declare them.

  You can uninstall all USB devices that do not exist as follows:

  • Open a command prompt window (start > run > cmd > OK)
  • Enter the following command and press enter

  Set devmgr_show_nonpresent_devices = 1

  • Start the Device Manager by typing the following in the same command prompt window

  devmgmt.msc

  • In Device Manager, click the view menu and select "Show hidden devices".
  • You should see a category just after "Non-Plug and Play drivers" named "other devices."  Chances are that there will be a big exclamation yellow mark beside it.  When you expand the "other devices" you should see several non identified "USB devices."  Uninstall all this.
  • Reboot (with the iPhone NOT connected).