Keyboard of Machine virtual VMware in caps lock shift when physical keyboard has caps lock

Similar Questions

• The verification of license application that runs on a machine virtual vmware.

  Hello!

  I'm sorry for my bad English.

  There is an application with the license related to the material. A computer - a license.

  As a general rule, a check of the license is:

  

  1. the application scans materials.

  2. the application collects information about the material and preparing an application for license availability.

  3. the application sends a request to check the availability of the license.

  4. the license server receives the request and returns a response. The application receives a response from the license server and active features.

  However, if the program is on the virtual machine - collection of information about the hardware fails.

  

  I could not configuration information physical server as the default methods do not do.

  Call to the hypervisor allows to collect statistics, but it is not enough to generate demand for the presence of licenses.

  

  --------------------------------------------------------------------------------------------------------------------------------------------------------------

  There are therefore 2 questions:

  How within the virtual machine, you can get information about configuring physical server?

  How can I implement the license related to the equipment, check if the program is running on a virtual machine?

  
  

  Thank you!

  The guest operating system and hypervisor can communicate with each other through the VMware vSockets.

• Console machine virtual VMware black/white

  Hi all

  Can be started this thread in the wrong community/category.

  am using VMware Vsphere 4.0, but all of a sudden one of the virtual machine am not able to view anything, its totally black and white.

  but the rest of the virtual machine are able to see the connection.

  Here is the screenshot of the problem.

  

  Even I tried to take this VM RDP, even black and white screen.

  everything has these question earlier. waiting for your valuable suggestions.

  Concerning

  Riadh Gunnal

  http://www.tech2solution.com/Forum

  That might solve your problem riadh http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1005710

  Please, do not forget the points of call of the "useful" or "correct" answers

  Mauro Bonder - moderator

• A Boot Camp Partition, two Machines virtual VMware Fusion

  After the installation of the Boot Drive Partition *, I see now two versions of the Virtual Machine Boot Camp. Is this normal? Can I delete one with no impact on my Boot Camp? Should I remove VMware Fusion altogether and reinstall so that I can have a clean virtual machine only the partition boot camp?

  *It is on a separate post, but can be linked... Initially, I installed VMware Fusion, without first running training Camp and installed a Microsoft XP operating system on it. It stopped working and I had a lot of problems with Windows that I decided to do a new installation, but this time using Boot Camp. I can see two VMS, (actually 3*), but I want to remove the first virtual machine without Boot Camp. I tried the virtual machine under users/Documents/Virtual Machines, but the directory is empty. I deleted the directory, just in case. When I returned to VMware Fusion, it can still start the virtual machine. I looked through the finder and can't find it. If not, how can I remove this virtual computer and free up space for the Mac?  (No need to answer this question if it is not related to the top)

  Take a look at: duplicate entries on the Virtual Machine Library dialog box

• Is it possible to install ESX 3.5 in a Machine virtual VMWare 6.5.1?

  Hello

  I created an Image VMWare 6.5.1 and trying to install ESX 3.5 for testing purposes.

  However, after that ESX charge and I accept the EULA to start the installation, the installation fails.

  The error I get is attached.

  Is it possible to have the ESX installed on a VMWare image?

  Please advice.

  Rgds,

  Shirad

  Yes, it is possible. Take a look at http://communities.vmware.com/docs/DOC-9000

  Regarding your problem - create a SCSI drive with controller LSI, not IDE.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• How to download and use my Win 7 Pro prior in a Virtual Machine in VMWARE PLAYER?

  before 3 years, I bought a win 7 pro PC - recently, I fee install 8.1... How to download and use my prior Win 7 Pro in a Virtual Machine in VMWARE PLAYER?

  Unfortunately, you must have prepared a recovery disk in advance or use the one provided with your computer.

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

• VMware Horizon 3.3.0 - slow when it is launched from a machine virtual (WS2008 R2) - all solutions?

  Hi guys,.

  We have an installer of VMware Horizon which works fine when accessed from our laptops.

  However, for several reasons, we also this environment accessible from a Windows Server 2008 R2 computer that resides in a virtual machine on a hypervisor.

  But the problem is that it is very very slow at the launch like this (you can feel the delay in cursor of mouse or when you open a window on the machine of Vmware View published). I want to clarify that the connection to the client VM (WS2008R2) is made through RDP.

  The questions that I have since I'm not able to find out so far are:

  (1) is x 86-64 catches WS2008R2 supported as a client? A Client of Horizon install VMware on it different in any way on a Windows 7 computer?

  (2) is the fact that he is virtualized to the cause of the slowness? If so, why is that and can do something about it?

  Thank you very much, I really appreciate your help.

  Jay.

  OK, he solved it myself

  It seems to the "Control Panel > mouse Options > pointers > scheme ' the 'Windows - Aero system' has been selected. The second I put it to zero, the cursor of the mouse began to behave and he moves normally.

  Jay.

• Install Oracle Linux 7 as a virtual machine in VmWare

  Hi all

  has anyone any information on how to install Oracle Linux 7 as a virtual machine in VmWare?

  Thank you and best regards.

  Take a look at: Oracle Linux 7

• Machines virtual FT can be backed up using backup as (VCB, vmware data recovery) technology, which uses the snapshot feature.

  Friends,

  Machines virtual FT cannot be saved using VCB, VDR, because he can't stand not instant. So how can we backup VMs FT?

  Hello

  Please read this article: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1016619

  It is contains guides for VMS backup FT.

• Use a Parallels virtual machine in VMware Player

  Currently run a Windows XP in Parallels on the Mac. I would like to be able to run this virtual machine in VMware Player in Windows 8.1 65 bit.

  Is it possible, or I have to recreate a new VM XP in VMware Player.

  If it is important it is run on a Microsoft Surface Pro 3.

  I would like to use VMware vCenter Converter Standalone installed in the virtual machine running under Parallels essentially do a V2V and then run the resulting virtual machine under VMware Player.

• Deployment of virtual machine using VMware Orchestrator

  Hello

  Can you help me pls with deployment of virtual machine using VMware Orchestration?

  Thank you

  Rekha

  Hello, Rekha, welcome to vCO take a look at my blog to get an idea of how use vCO. Christophe & I (and a few guests) have posted some tutorials around doing things with Orchestrator. Particular interest to the subject of this thread would probably be this series into three parts:

  Create a vCO simple self-service VM Provisioning Portal - part 1

  Create a vCO simple self-service VM Provisioning Portal - part 2

  Create a Simple Self Service VM Provisioning Portal vCO - part 3

• How to activate the Internet connection on Windows Server 2003 is installed in the virtual machine in VMware Workstation 8?

  I have Windows Server 2003 is installed on a virtual machine in VMware Workstation 8. I need it to learn and practice the use of the Active Directory. I've also set up 3 Windows XP workstations connect to it, which means that they can communicate with Server 2003. What is lacking is the Internet connection on all of them. When I run ping 8.8.8.8 in one of these virtual machines, I get, 'Destination host unreachable.'

  I'm not sure, what if the problem comes from the settings in Windows or the settings of the virtual machine.

  Can someone help me?

  Thank you, guys. I was finally able to put in place. It was quite an ordeal to deal with IP addresses and virtual networks. Here's how I did (in the screenshots) in case someone else needs it.

  (I also confess that it is perhaps one of the ways to implement. Maybe there is an easier way to do it with DHCP...)

  1. in your computer where is installed VMware Workstation 8 begin the "Virtual Network Editor." It is located in the folder of installation of VMware Workstation. And implement the network following (VMnet2 in my case):

  

  2 then in VMware Workstation itself in the virtual machine when Windows Server 2003 is installed set up two network as connections:

  This one is for external access to the Internet:

  

  And this one for intranet communications AD:

  

  3. then in the machine virtual de Windows Server 2003 set up what follows for two network adapters:

  For Internet access:

  

  Then, you need allow this connection to share:

  

  And then for the ad access to workstations (ensure that the static IP address is in the range specified in the virtual network over VMnet2 network editor). I've also set up DNS to 127.0.0.1 because I installed on this Windows 2003 DNS server:

  

  4. from the Windows 2003 VM try ping 8.8.8.8. It should work now.

  5. go to each workstation, in my case, Windows XP, each in its own virtual machine and set up the network in the VMware Workstation as follows:

  

  6. then in the virtual machine, configure the network connection for Windows XP workstation. Don't forget to assign a new static IP address for each workstation, which not coinside with IP of the domain (this IP address must come from the range specified in the virtual network over VMnet2 network editor):

  

  7. try first ping the domain, in my case ping 192.168.237.128. And then Internet, ping 8.8.8.8. The two should work!

  Continue with steps [5-7].

• Cannot turn on the virtual machine in VMware workstation

  Hello

  I have windows 2008 stocked VM of windows 4.1.Inside ESX VM 2008 I installed VMware workstation and created the virtual machine in vmware workstation. When I have tride to power on the VM iam getting error below. Please help me.

  "Running vmware workstation in a virutal machine requires external thr virtual machine is configured to run the vmware esx host operation system.you may not power on a vierutal machine until the external virtual machine is reconfigured.

  Thank you

  Victor

  This is the VM vmx nested - you must add this line to the external virtual machine - one who runs in ESXi

• Cannot save the virtual machine in VMWare Server 2

  Hi all:

  I created a VM (12.1 OpenSuSE 32bits) in VMWare Workstation 7; then I copied it to a host VMWare Server 2.

  When I try to save the virtual machine via the web, the server fails (or at least interrupts the response from Web page), so I tried to save it via command line.

  After searching a bit I found this:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1006160

  The question is now that I can't find any vmware-cmd anywhere, and when I run vmware-vim-cmd I get the following error:

  vmh2: / data/vmachines/postgresql-box # vim - vmware - cmd solo/registervm /data/vmines/postgresql-box/postgresql-box.vmx
  Connection failed: vim.fault.NoPermission

  So I'm stuck... someone can help me?

  BTW: what is ESX, ESXi and what version of ESXi is included in VMWare Server 2?

  Thank you very much

  Luis

  I can't tell you exactly what are the causes of the problem. What I would try (a solution) is to create a new virtual machine in VMware Server with the same specifications as the original one, then copy the two files hard in the new virtual machine folder and edit the .vmx file for the new VM 'OpenSuSE - 12.1 - cl1 - 000001.vmdk' use as its virtual drive.

  André

• What is the proper way to remove a virtual machine in VMware Player?

  I created a machine virtual in VMware Player but not yet installed the operating system. I would like to delete the virtual machine and start from the beginning of the process. What is the proper way to remove a virtual machine in VMware player?

  Just curious, have you even looked in the help file in VMware Player?  It tells you how to remove a Virtual Machine.

  With the Virtual Machine off, right-click in the Virtual Machine library and select: remove VM disk