keyboard USB not recognized by when you try to install from WinXP cd

Similar Questions

• Photoshop cs4 access denied when you try to install from disk in Windows 7 64 bit.

  Photoshop cs4 access denied when you try to install from disk in Windows 7 64 bit. I tried in

  safe mode and it starts to install, but get an error there as well.

  What should I do?

  So when you put the disk in it does not work properly? When the disc is inserted, you should have a window pop up with 2 options. 1. install and another to see what is on the disk. Choose to open the disc or explore. Navigate to the folder where is the photoshop CS4 .exe file (which runs the Setup program), right-click on the .exe file and choose Run as administrator and it should start. See if it will install. If this isn't the case, then read below.

  I don't know how long you got in the installation until so chances are, you will need to run the CS4 Cleanup utility. 2 levels to run but do not use 1 or 2 just type number 3.

  http://www.Adobe.com/support/contact/cs4clean.html

  You may need to run the utility windows install cleanup too

  http://support.Microsoft.com/kb/290301

  Before you try to reinstall the software make sure that adobe reader is not installed. If it is delete. It has caused problems in the past with vista and CS4 installs.

  You can also disable windows Defender and all antivirus software. You can keep UAC Windows 7.

  When installing CS4 to 90 percent, it stops almost and may take 5 to 10 minutes at the end. It's normal. What a pain huh...

  After the installation is complete, restart

  After restarting, go to the icon of CS4 64-bit or 32-bit (depends on 32-bit or 64-bit Windows 7) in the starting area, right-click on CS4 64-bit (if you have windows 7 64 bit), and then choose Properties, Compatibility tab, and then check run as administrator at the lower part. Hit apply, ok to finish.

  Now, run CS4 and run the update.

• I get an "information not found" error when you try to install Photoshop CC

  FATAL: Payload "Camera profiles Installer_8.6_AdobeCameraRawProfile8.0All 9.0.0.6 {5CD475F2-DDA0-4173-9FF5-206331209813} ' not found in Media_db information

  When I try to install it again, it starts at 42% installed, then past at 43% and then stops immediately with a message «Impossible Installation - learn more»  Follows the message above.

  Thanks... that did not work, but it lead me to what worked: https://forums.adobe.com/message/4834213#4834213#4834213

• I get an error message "the installation package could not be opened" when you try to install the downloads (for example java)

  It comes up with a box indicating:

  This installation package could not be opened.  Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package.

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Substitute:

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  If this is insufficient, the I would say to install the Windows Installer Cleanup utility and run that to remove the Java remains Setup files that can cause problems with your current installation.

  For more information, visit the below mentioned link:

  http://support.Microsoft.com/kb/290301

  ------------------------

  Click Start Orb, in the box, type search: Regedit.

  Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

  Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

• message "your purchase could not be completed" when you try to install Adobe Reader from the Windows store

  I try to install Adobe Reader Touch to my Surface installed Pro Windows 8.1 Microsoft Windows store.  I get the following message is displayed:

  "Your purchase could not be executed.

  Something has happened and it's impossible to make your purchase.  "Error code: 0 x 080070057.

  Only, this seems to be a problem with Adobe Reader Touch.  I was able to install applications from other vendors and Adobe (for example, Photoshop Express to the elements).  So it doesn't seem to be a problem with my Adobe account, or a problem with Windows Store system.

  Anyone have this problem?  All solutions?

  THX.

  Hi jjquinn75

  I recommend contacting Microsoft about this error message as it is returned by the windows store program.

  Furthermore, I you recommend to download the installer for Adobe reader offline using this link (Adobe - Adobe Acrobat Reader DC Distribution ) and then try to install on your device pro surface.

  Kind regards

  Rahul

• Error DF024 when you try to install from the manager on Windows 10.

  Hello

  I hope that someone on the forum can help me that I find all adobe links VERY useless. I recently updated my version of Windows 10 and erased all my programs and my C: drive to allow a good computer. Since then, Adobe Application Manager is not a CC 2015 applications install to my computer without this error:

  "-------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 1 Error (s)

  -Payload: Adobe Premiere Pro CC 2015 9.0.0.0 {38C72D42-0672-43B1-9E05-E7631684F9A1}.

  ERROR: DF024: cannot move the file in "C:\Program Files (x 86) \Common {38C72D42-0672-43B1-9E05-E7631684F9A1} \_77_6da23380d7fce ae57da591c4af577f49 ' to 'C:\Program Files\Adobe\Adobe first Pro CC 2015\AXE8SharedExpat.dll' error 32 the process cannot access the file because it is being used by another process... Try setting the correct permissions for the specified file/folder or parent, so that the admin has the right to modify. (171 Seq)

  -------------------------------------------------------------------------------------"

  This happens on all apps via the Manager. To work around this ive tried to install directly on the site, only to be converted in the handler for that he fails again. I ran all cleaners known to man only for her to not make any difference whatsoever, and ive even tried the solution that was supposed to have been a 'determination' to someone elses similar problem (this link https://forums.adobe.com/thread/1858062?q=Error+DF024) even when the lance in the account admin high on all machines W10 again does nothing and is defective. I tried to remove the Adobe folders manually in all possible positions, but again, this has no effect.

  I'm really at a loss as to what I can try but PLEEEASE HEELLPP!

  Thanks in advance!

  Disable anti-virus and firewall, if its on in selective startup mode and try to install.

  Beyond that, we will have to check with the Setup logs to find out what past exactly.

  Or you can also contact Technical Support Adobe once, they can access remotely your comp and check with the question.

  You can contact the Support from Adobe using link below:

  [Click the button still need help and select the Chat option]

  Contact the customer service

  Ask for technical assistance.

• Windows Installer service could not be accessed when you try to install Itunes

  I have a new Dell under Windows 7 Home Premium.  I'm unable to download Itunes.  I am trying to download the version for Windows 7 64-bit systems, but when I click to run the software I get the following error message:
  Install the windows service could not be accessed.  This can occur if you are running windows in safe mode or if windows install is not properly installed.  Contact your support team.
  
  I am not running windows in safe mode and I am logged on as administrator.  I tried to stop and start the windows setup program and rebooting the system, but I still cannot install the program.

  I installed other programs of the disc and download without problem.  However, I am also having a problem installing update the following windows: 2007 Microsoft Office Suite Service Pack 1 (SP1).  When I tried to download it I get the following message is displayed:
  Error code 8007066f Windows update has encountered an unknown error.

  This would be part of the same problem?

  Any help would be appreciated.

  Thank you.

  Try the steps detailed in this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/a077c5d9-6d6f-40e6-800F-60f393b5bd79

• "Could not read data" when you try to print from Android

  Hello. I have a printer HP Officejet 6700 Premium, which is connected via ePrint/HP connected to my Google account so that I can print from my Google devices (Cloud Print). While this works very well when printing from my laptop (29 Chrome on Ubuntu 13.04), it does not when printing my Nexus 10 (Android 4.3) or my Galaxy Nexus (CyanogenMod 10.1.3). I tried printing both outside and inside the network on which the printer is on, but whenever I get "could not read data" in the Cloud Print dialog box. It seems that Cloud Print knows that the printer exists, since it is on the list, but it cannot communicate with the printer. Any way to solve this problem? He's good enough additional features only on my previous printer, who died of old age.

  It seems to me that the question is in fact Cloud Print related. Here is the support page: https://support.google.com/cloudprint/?rd=1

  Remember that Google Cloud Print is still in beta phase. Good luck tomslominski.

• Server did not respond error when you try to install Service Pack 1 for Windows XP.

  I had to do a restore system with xp home edition. Trying to update from sp1 which has been downloaded to the thumb drive and sent to my office at the top of the page. starts to load, and then tells me that the server did not respond. I am connected

  You do not start with a service pack earlier and go to the top. You only download the latest service pack. The latest service pack for Windows XP Home Edition is Service Pack 3.

  Go to Windows Update and see if you can find it there.

  If this isn't the case, then you can manually download it here:

  http://www.Microsoft.com/download/en/details.aspx?ID=25129

  It is a CD image file that requires you to burn to a CD or use a virtual CD/DVD software like Virtual CloneDrive. This allows you to open the ISO file as if it was a real CD inserted into your DVD drive. All you have to do is double-click the ISO file, once you have installed this program. Run the configuration file.

  http://www.SlySoft.com/en/Virtual-CloneDrive.html

• ERROR "the system has not been modified" when you try to install a game.

  Hey guys, I am trying to install a game called Smite but a little while in the installation, I get an error that says that "the system has not been modified. To install this program at a later time, run the installation again' can someone tell me how to solve this problem? I am running Windows Vista 34 bit

  Hey Connor,

  I wish that you contact the support of game from here-

  www.hirezstudios.com/smitegame.

  Back to us for Windows issues, and we will be happy to help you.

• "A problem with this Windows Installer package. "A program required for this install to complete could not be run" when you try to install iTunes

  Original title: problems during the installation of products on vista with error message that indicates:
  I need help ASAP please! I tried to install the new Itunes software and my Vista laptop just will not let me... any ideas.

  I have download the new iTunesSetup and click it to start the installation process and the process begins. After 2 minutes, the following message appears:

  "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package.

  I already did:

  • "To manage my computer' on automatic rather than manual
  • Guests of controls too and still no change
  This has been going on for about a week or two now, and I really need help.
  Any ideas or help would be appreciated.
  Thank you

  Hi once again, fortunately today I bring better news! As a result of a serious lack of assistance from Apple themselves, have no idea of "The Tech Guys" in the world PC and extremely unnecessary hours at Microsoft, I've sorted it me. In other words, the main problem with mine was the Apple Software Updater. Even with "Revo" I was unable to remove it. I decided to download "Windows Installer Clean Up" from there where I could find (it was also free!). I used it and immediately found, I could choose the Apple Software Updater and remove it with very little hassle in all. I proceed to download the new iTunes, and I'm a very happy Bunny! Thanks for nothing, Microsoft and Apple! Hope this helps - Dan

• Error 0 x 80070422 - Firewall error when you try to install from Microsoft Store

  on windows 8, I can't activate windows error code 0 x 80070422 firewall comes up and will not install anything from the microsoft store, indicating the firewall must be enabled

  Hello, Adam M.

  Adam M thanks for your response. I could solve the problem. I had to discuss with your support, and he sent me links for that matter. The problem was that my Windows Update has been disabled after that I changed it in automatic mode, I could install Apps without any problem :)

  Best regards
  Martin Adm

• When you try to install call of duty 2 on windows 7 64 bit, I received "library not registered".

  original title: library not registered

  When you try to install call of duty 2 on windows 7 64 bit, I received "library not registered".

  ------

• "Not enough memory is available to process your order" when you try to install the drivers

  Recently, I have problems when you try to install the drivers for a USB mouse that I have. When I plug the mouse, it detects it and tries to install the software but it gives me an error saying he found the software but can't install it because "not enough memory is available to process your order."

  I spent a bit of time, search tries to find a solution to this problem, and I tried a lot of things without success.

  I tried the things:

  -Manually installed the drivers. While I can install them, Windows does not recognize the drivers as being installed and the mouse still not working.

  -The fix IRPStackSize. It was not in the registry, so I thought this might be the solution, but it does not solve my problem.

  -Troubleshooting and repair of Windows Update. I had a memory leak problem with Windows Update, so I thought fix which would cure the problem. I was able to d/l an update that corrects this problem, but it does not solve the driver problem.

  Anyone have any ideas on how to solve this problem? Thanks in advance.

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run the system file checker (SFC) and see if it helps.
  Reference:
  Use the System File Checker tool to repair missing or corrupted system files
  https://support.Microsoft.com/en-us/KB/929833

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Please keep us informed.

  Thank you

• Why do I get a message saying that I am not connected to the Internet when you try to install IOS 9.3?

  WWhy I get a message saying that I am not connected to the Internet when you try to install IOS 9.3?

  It is a known issue and Apple is working on a fix for 9.3. This article summarizes some of the problems with the current version.

  http://osxdaily.com/2016/03/25/Troubleshooting-iOS-9-3-update-problems/