Keys - cannot find sigtool.csk file of code signing

Similar Questions

• Window 7 unsuccessful backup, error message "the system cannot find the specific file" error code: 0 x 80070002.

  I tried to back up my desktop using Windows 7 upwards, but he is not successful, he stopped, message error "the system cannot find the specific file" error code: 0 x 80070002.  He said no specific file that causes the problem.

  Also, my Seagate FreeAgent, I back upwards of C: from my old PC that runs under Windows XP, which causes conflicts of the OS?  Enjoy diagnose and advise!

  Hello

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  I suggest you follow the steps in the link below and check off the question:

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7:

  http://support.Microsoft.com/kb/979281

  I hope that the information above helps you.

• Unable to save the family settings, error: the system cannot find the specified file 80070002 error code.

  Original title: Family Safety filter configuration problem.

  Hello.

  I got family safety works very well before a reinstall of Windows 7 Professional.  After I install windows essentials, I connect to my microsoft account, now I'm trying to set up the filter, monitored accounts are already checked, the only option is to save.

  When I click Save I get this

  The system cannot find the specified file 80070002 error code.

  I've tried everything.  Uninstall, reinstall Windows Essentials 2012.  First of all, I did a partial install with just the film and the family.  Uninstalled.  Re-installed full.  Always the same question.  I even tried to install Windows Essentials 2011.  No change.

  Help, please.  I appreciate it.

  Thank you

  GISIGER

  Hi Greg,.

  Thanks for the reply.

  Run the System File Checker tool.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833

  Also reset Windows update components and check if this solves the problem.

  Refer to this link:

  http://support.Microsoft.com/kb/971058

   

  Important: Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.

  Keep us informed on the status of the issue.

• The MCSTRM service failed to start due to the following error: the system cannot find the specified file

  My computer starts rather suddenly gel with many applications.  Today it froze again once I finished a long email and was about to send.  I lost him of course.  My Event Viewer was the topic.  Event 7000, Service Control manager Eventlog.

  What can I do?  I have Vista SP2 64-bit.

  I'll add that the kernel_driver of Type 1 mcstrm following 1 State arrested Win32_exit_code 2 <0X2>Wait_hint Checkpoint 0 x 0 0 x 0

  Please... any help to fix... my computer keeps freezing. and I will need to get a new laptop or an Ipad, if the problem persists.

  Thank you

  Candy C:\Users\David> net helpmsg 2

  The system cannot find the specified file.

  Is that error on this post code, IE something deleted, probably your antivirus or you.

  For problems to explore, which has nothing to do with this post, try this (which covers almost any problem).

  Explorer

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

   

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

  You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

  If the problem affects Panel press the Windows key + R and type wercon (or type it at a command prompt).

   

  Close the browser and start a command prompt

  • Close Windows Explorer
  • Start - All Programs - Accessories - right on command prompt and choose run as administrator.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete then Task Manager.
  • Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.

  Then to restart the Explorer after trying all of the following

  • Press Ctrl + Alt + Delete and choose Task Manager
  • In the Task Manager, click the file menu and then click new task (run) and enter explorer

   

  If you cannot start the Explorer at all

  • Press Ctrl + Alt + Delete and choose Task Manager
  • Under the processes tab, click Show processes from all users to elevate to administrator
  • In the Task Manager, click the file menu and then click new task (run) and type cmd
  • Other things you can try typing
    

    Explorer
    Explorer c:\
    Explorer/e, c:\
    wercon
    control
    Iexplore
    Rstrui

  If you cannot start a folder window you can use the Browse button in the new task dialog. Don't forget that you must right click and choose Open rather than double-clicking.

   

  Reregister the shell registry entries

  It is important that each order is accepted. If the command fails it means the file is damaged and must be repaired.

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  regsvr32 /i shell32
  regsvr32 /i urlmon.dll
  regsvr32 RPCRT4.dll
  regsvr32 PROPSYS.dll
  regsvr32 MSCTF.dll
  regsvr32 cscui.dll
  regsvr32 rsaenh.dll
  regsvr32 timedate.cpl
  regsvr32 ATL DLL
  regsvr32 OLEACC.dll
  regsvr32 actxprxy.dll
  regsvr32 USERENV.dll
  regsvr32 msshsq.dll
  regsvr32 NaturalLanguage6.dll
  regsvr32 thumbcache.dll
  regsvr32 WINTRUST.dll
  regsvr32 MMDevAPI.DLL
  regsvr32 audioses.dll
  regsvr32 audioeng.dll
  regsvr32 ExplorerFrame.dll

  
  regsvr32 msi.dll
  regsvr32 FirewallAPI.dll
  regsvr32 netshell.dll
  regsvr32 pnidui.dll
  regsvr32 QUtil.dll
  regsvr32 c:\windows\system32\wpdshserviceobj.dll
  regsvr32 WINHTTP.dll
  regsvr32 C:\windows\system32\qagent.dll
  regsvr32 C:\windows\system32\portabledeviceapi.dll
  regsvr32 wbemprox.dll
  regsvr32 wbemsvc.dll
  regsvr32 fastprox.dll
  regsvr32 imapi2.dll
  regsvr32 wshext.dll
  regsvr32 gameux.dll
  regsvr32 msxml6.dll
  regsvr32 vbscript.dll
  regsvr32 jscript.dll
  regsvr32 wshext.dll
  regsvr32 wshom.ocx
  regsvr32 wshcon.dll
  regsvr32 scrrun.dll
   

  Delete the folder and the settings of the Menu

  This will remove the settings are saved for each file that you visit. Also the order of the start menu and pinned list settings.

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StartPage" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder" /f

  Delete the thumbnail and icon Caches

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  attrib - r s h '% userprofile%\AppData\Local\*.db '.

  attrib - r s h '% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db '.

  del "% userprofile%\AppData\Local\*.db".

  del "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db".

  Disable thumbnails and previews

  Damaged documents and particularly corrupt pictures or videos, can cause Explorer crash all trying to generate a thumbnail or an overview. This miniature and previews active option off.

  If you can start the Explorer, previews is Union on the command - folder and Search Options - framework of tasks use classic Windows foldersbar.

  Thumbnails are organized on the command bar - folder and Search Options - view tab - and check under Advanced settings - always show icons, never thumbnails and uncheck Show icon file in the pictures.

  If you cannot start the Explorer close Explorer as above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000001 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000000 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000000 f

  Turn around after testing the Explorer.

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000000 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000001 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000001 f

   

  A boot is a way to explore

  It can be caused by a shell extension.

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

  The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.

  • Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
  • Close Windows Explorer
  • Start Autoruns by right-clicking and choose run as administrator
  • Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
  • Go to the Explorer tab and uncheck everything to the left.
  • Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
  • Press Ctrl + Alt + Delete and choose Task Manager.  Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
  • Click the file menu and then click new task (run) and enter explorer

  If this can help, reactivate ½ at a time to identify those who. If this does not help, restart AutoRuns and go to the all tab and uncheck everything that it and restart. If this can help, reactivate ½ at a time to identify those who.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see problems explore

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  Recycle Bin
   
  If the problem is the trash bin remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   

  RD C:\$RECYCLE. BIN/s/q

   
  then repeat for each drive to change the drive letter, for example
   

  d:\$recycle Rd. BIN/s/q

   

  e:\$recycle Rd. BIN/s/q

   
   
  If the Office does not start
   
  This will create a new empty by user and common desktop computer. This will allow to test if a file on your desktop to start the Explorer.
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   

  MD "% userprofile%\DesktopTest".

   

  Add reg "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% USERPROFILE%\DesktopTest" /f

   

  MD "% public%\desktopTest".

   

  Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" v "Common Desktop" REG_EXPAND_SZ /d "% Public%\DesktopTest" t f

   
  To restore default after having tested if begins to explore.
   

  Set ExpFix1 = % user

   

  Set ExpFix2 = % profile

   

  reg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f

   

  Set ExpFix1 = % Pub

   

  Set ExpFix2 = % lic

   
  reg add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/f
   
  You will need to disconnect then.
   
   

  New entry missing folder

   

  If the above does not help.

   

  Download NewFolder.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121.

   

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the NewFolder.reg.
    

• Tried to reinstall Windows7 and received error: "Windows cannot find"C:\Program File (x 86) Nova Logic\ Joint Operations Typhoon Rising\Jointops.exe".

  I am running Windows7 Home Premium and something happened to my computer not allowing me to run some of my programs, we get an error code, for example: "Windows cannot find"C:\Program File (x 86) Nova Logic\ Joint Operations Typhoon Rising\Jointops.exe". Make sure you typed the name correctly and then try again. "After several attempts to reinstall these programs with no solution, I tried to reinstall my OS.  After that I introduced my key code a message came up saying I had to rebuy a keycode to activate Windows 7. a black screen came and another message says that my version of Windows was not authentic and my OS was not fixed or reinstalled. What can I do to fix this problem without buying a new key code and spend a lot of money that I don't have? I'd appreciate any help you could give me!

  I have to reinstall my operating system using the custom installation available on my drive; However, I lost everything and had to reprogram all my files, folders and programs; but at least it didn't cost me another $109.00 for a new code. Thanks anyway

• The engine InstallShield (iKernel.exe) could not be installed. The system cannot find the specified file.

  I am running XP Pro and I am trying to install a program, and I get this error code: motor InstallShield (iKernel.exe) could not be installed.  The system cannot find the specified file.  How can I solve this problem?  Thank you.

  Hello

  · What program are you trying to install?

  You can check the link and try the steps listed: error Ikernel.exe when you install programs by using InstallShield: http://support.microsoft.com/kb/810608

• Ho can solve the error, "the system cannot find the specified file. (0 x 80070002) » ?

  There can someone offer advice, IN PLAIN ENGLISH, SPEAK NO TECHsolve the error "the system cannot find the specified file. (0 x 80070002) "I get when I try to back up my computer using an external hard drive. I tried to update the software of the external hard drive, cleaning the registry, send emails to tech support and the curse / gnashing of teeth. Windows is supposed to make it easy to save with a single click, but it seems to be impossible! I looked for solutions on the net, but if I knew what the heck was a hex code, I wouldn't need to ask this question. Help please!

  Hello

  This is a forum for microsoft at the link specifically for backup questions below

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• "The system cannot find the specified file" error when you try to install a hotfix/cab package using the DISM tool Package Manager

  I'm testing the integrity of the addon ".cab" packages and patches by installing using the Package Manager (pkgmgr.exe), or alternatively, the Deployment Image Servicing and Management Tool (DISM.exe) for Windows 7.  To do this, I am aware that I have to call a tool through the command line.

  In the Package Manager, I use the syntax

  Command prompt > pkgmgr.exe /ip /m:C:\Test\test.cab

  Otherwise, I might add the path in quotes:

  "Command prompt > pkgmgr.exe /ip /m:"C:\Test\test.cab.

  The error returned in pkgmgr is:

  Operation failed with 0 x 80070002.  The system cannot find the specified file.

  My first impression was that my syntax is incorrect, although I can't have room for error.  The path points to "test.cab" which is a renamed windows addon that contains the necessary file "svcpack" and the file "entries_XX.ini".  I used several different ".cab" file, that which some I know to be genuine, hopefully exclude the possibility of a corrupted or incompatible file.  I also tried this procedure on different computers and received the same error code, so I doubt that the tool pkgmgr istelf is corrupt.

  Finally, I tried an alternative Windows 7/8 DISM tool to try to achieve essentially the same task by using the following syntax in a command prompt:

  "Commnand prompt > DISM.exe / Online /PackagePath:"C:\Test\test.cab Add-Package ".

  This produces a similar error:

  An error occurred trying to open it - C:\Test\test.cab error: 0 x 80070002
  Error: 2
  The system cannot find the specified file.
  The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

  I'm really not sure why I produce these errors.  Any idea is appreciated.

  Hello

  Thanks for posting your question on the Microsoft Forum.

  I suggest you to ask your question in the TechNet forums.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking&filter=AllTypes&sort=lastpostdesc

  TechNet is watched by other computing professionals who would be more likely to help you.

  I hope this helps.

  _________________

  Thank you best regards &,.

  Isha Soni

• Windows 7 Task Scheduler error: the system cannot find the specified file.

  Here is information when you try to change the properties of a task in the Task Scheduler:

  FX: {c7b8fb06-bfe1-4c2e-9217-7a69a95bbac4}

  The system cannot find the specified file. (Exception from HRESULT: 0 x 80070002)

  Type of exception: System.IO.FileNotFoundException

  at Microsoft.Windows.ManagementUI.CombinedControls.INetwork.GetName)

  to Microsoft.Windows.ManagementUI.CombinedControls.UINetwork.GetUINetwork (network INetwork)

  at Microsoft.Windows.ManagementUI.CombinedControls.NetworkListManager.GetNetworkList)

  at Microsoft.Windows.ManagementUI.CombinedControls.ControlTaskConditions.PopulateNetworkComboBox)

  at Microsoft.Windows.ManagementUI.CombinedControls.ControlTaskConditions.InitializeConditions)

  at Microsoft.Windows.ManagementUI.CombinedControls.EditTaskDialog.InitializeView)

  at Microsoft.Windows.ManagementUI.CombinedControls.EditTaskDialog.Initialize (file UITaskFolder, String taskName, String title, UserChoice userAction, BaseResultsControl inOwnerView, String inXmlText)

  at Microsoft.Windows.ManagementUI.CombinedControls.BaseResultsControl.EditTask (UITaskFolder file, String TaskName)

  to System.Windows.Forms.MenuItem.OnClick (ByVal e As EventArgs)

  at System.Windows.Forms.Command.Invoke)

  at System.Windows.Forms.Control.WmCommand (Message & m)

  at System.Windows.Forms.Control.WndProc (Message & m)

  at System.Windows.Forms.ListView.WndProc (Message & m)

  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)

  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• Backup of Windows 7 - the system cannot find the specified path, error Code 0 x 80070003

  I have serious problems back up my own machine to a share on our FILE SERVER as \\FILE-SERVER\Backup\

  I have already backed up another PC using exactly the same settings I used on my PC successfully.  So I guess it's nothing to do with the FILE SERVER or the backup settings.  There must be something to do with what I'm trying to backup of my machine.

  First, some background.  This exercise was started when Windows Server 2008 r2 o/s fell one of our servers.  I tried to reinstall the operating system several times, without success.  In the end, I caught another drive and rebuilt the o/s on the server.  Then I got in trouble by promoting to a domain on the network controller.  In the end, I've renamed server FILE Server for FILE SERVERS.

  We share regularly four records on what is now the FILE SERVER:

  \\FILE-SERVER\Backup - a folder where the backups of all other devices are written, so that they will be saved with the server

  \\FILE-SERVER\Company - contains all of the data of our company

  \\FILE-SERVER\GEM - this is for our own database application

  \\FILE-SERVER\Install - contains all the installation files for the software we use

  These are all inmates on a RAID 1 array that is separate from the system drive that covered.

  On my laptop, I had made these "Available offline" shared folders, while I still had everything that is available to me when I was away from the office.  They were of course shared under \\FILESERVER\... not \\FILE-SERVER\... Before the server down, I had backup works fine on my machine.

  After having got the server up and going again, I started going there from the WIndows 7 Client PC backups again.  I started with a desktop computer, which of course have not all offline files.  This turned out to be relatively simple.

  Then, I started with my machine.  Initially I did not 'Available offline' folders shared meanings.  I created my backup using exactly the same settings that had worked OK on the desktop.  But when I ran the backup I got:

  The system cannot find the specified path, error Code 0 x 80070003

  I tried all sorts of things to make it work:

  • with or without an image of the system.
  • reducing the backup in a single folder.
  • do it again 'available offline files

  Nothing makes no difference.  In the end, I looked in the Sync Center to look at the offline files folder.  Under mapped network drives I discovered that I still had the files and folders in \\FILESERVER.  In their Menu Popup 'Always available offline' is grayed out.  So I deleted the Copies offline.  This delete the files in the folders but not files.

  Since I could find no way to delete the old mapped network drives.  I decided that I had painted myself into a corner.  So I bit the bullet and re-installed my laptop too.  This will get rid of the unwanted old mapped network drives - BUT NOT the ERROR!

  HELP - I'm running out of ideas!

  I have a WORD Document that all the settings that I used on the server and Clients, as well as the reasoning behind these settings, documents, but I can't find a way to download.

  Hi Brian,.

  These problems occur because the folders or libraries that you are trying to back up or restore include a reparse point.
  Analytical points are similar to shortcuts Windows or Unix symbolic links. A point of analysis can be used to point to a file that is moved temporarily to a different drive. For example, a reparse point would a folder such as C:\DVD to point to drive E, the real DVD player.

  Perform the steps from the link below and see if the backup works.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors  

  If you work with Windows Server 2008 and the mapped drives, I would recommend that you post the question in the TechNet forums.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  I hope that using information provided!

• Error: The system cannot find the specified file. (0 x 80070002)) While performing a regular system backup

  Original title: Backup has encountered a problem

  I just tried my regular backup process and I received the following message:

  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\AppData\Local\Microsoft\Outlook file. Error: (the system cannot find the specified file. (0 x 80070002))

  This is not the first time that I received - in the past, I have simply ignored.

  I had "worried" and thought I should come to the 'experts' to get advice.

  Any ideas?

  Thank you very much

  Hi Barbra Wagner,

  This problem may occur if you back up a library that contains custom folders that are located under your user profile.

  Could you please let us know about where are you trying to save?

  I suggest you check the steps in the section: resolution of scenario 1 of the following article and check.

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7

  http://support.Microsoft.com/kb/979281/en-us

  Please answer us on the State of the question to help you further.

• Error: The system cannot find the specified file (0 x 80070002), when you perform the backup of Windows.

  Original title: missing for InputPersonalization file

  I used the Windows 7 backup utility for several years and recently it has begun to generate the following error:

  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\AppData\Local\Microsoft\InputPersonalization file. Error: (the system cannot find the specified file. (0 x 80070002)

  I checked with Windows Explorer and confirmed that this file does not exist in this way. Instead, the file exists in the path under my local account.

  How can I stop this error? In addition to a clean backup, I like to keep the overall system as clean as possible.

  Hi Jeff,

  Thanks for joining us.

  Please visit the following link to resolve this problem:

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7
  http://support.Microsoft.com/kb/979281/en-AU

  Scenario 1 is similar to the issue that you are facing. However, you can also try the steps outlined in the other scenarios and see if the problem is resolved.

  Please, try the steps and get back to us with the State of the question.

• Windows 7 backup (the system cannot find the specified file. (0 x 80070002))

  Windows 7 Professional 64 bit
  I'm NOT under a system dual boot, OR trying to save to an external drive.
   
  I get the following error message after you run backup.
  Backup has encountered a problem during backup of the file C:\Windows\System32\config\systemprofile\Audio Interviews Etc. error: (the system cannot find the specified file. (0 x 80070002))
  The Audio Interviews etc folder does NOT exist on my HD.  I know because I deleted it.
  It would seem that the backup uses a master list to determine which files should be saved and where are these files.
  I ran regedit looking for some Audio Interviews and did not get a hit.
  I also ran sfc/scannow and without errors, etc. were found.  "... Windows resource protection did not find any breach of integrity... »
  Where is this list and can remove Audio Interviews Etc. She?
  Create a folder called Audio Interviews etc in the folder systemprofile seems a kludgy way to deal with this issue.
  Suggestions/answers would be appreciated.
  TIA

  Hello

  I see that you have found an error after performing a backup. I'll help you with this problem.

  As you already mentioned that you deleted the file, I would like to display hidden files and folders and check once more to confirm that the file is not present in the computer.

  Make sure the show the hidden files and folders option is turned on. To do this, follow these steps:

  Windows 7:

  1. start Windows Explorer. To do this, click Start, type userinit.exe in the Search box and press ENTER.

  2. click on organize, and then click folder and Search Options.

  3. click on the view tab.

  4. click on the next option to DISPLAY FILES AND FOLDERS HIDDEN - click Apply - OK.

  We can also refer to this article and check if that helps.

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7: http://support.microsoft.com/kb/979281?wa=wsignin1.0

  I hope this helps.

• Backup has encountered a problem in file C:\Users\Laura\Saved backup sets. Error: (the system cannot find the specified file. (0 x 80070002))

  How can I stop this error after completing a back-up?

  Hello

  Thanks for posting the request in the Microsoft community forums.
  I understand that you are facing a problem when saving the file. I will definitely help you with this.
  Please answer the following questions.

  1. where exactly you are trying to save the file?
  2. what anti-virus software is installed on the computer?
  3. don't you make changes on the computer before the show?

  This problem can occur for the following reasons:

  · The computer stops responding.

  · The copy operation stops.

  To resolve the error "Backup has encountered a problem during backup of the file C:\Users\Laura\Saved games. Error: (the system cannot find the specified file. (0 x 80070002)) "on the computer, you can try the following steps:

  See the steps in the link and check:

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7
  http://support.Microsoft.com/kb/979281

  Hope this information helps you. If the problem persists, feel free to let us know. It is our pleasure to be of service.

• C:\Windows\System32\config\systemprofile\Podcasts. Error: (the system cannot find the specified file. (0 x 80070002))

  I have a simple backup save plugged to the computer all the time and every time schedule of running back u when you are finished, I get the same number of podcast which refers to it as it is not found, how to fix it?  If the simple save does not find it it far from rermove it simple backup? so it won't pick up eventually

  Hello

  Thanks for choosing Microsoft Community to post your question.

  According to the description above, it seems that the backup fails, you get an error: the system cannot find the specified file. 0 x 80070002. I'll be happy to help you.

  This error message occurs on different scenarios, see the following link. There are suggestions based on the scenario.

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7

  http://support.Microsoft.com/kb/979281

  I hope that the above steps will help us solve your problem. If you have additional problems, please reply to this post and we will be happy to help you further.