kindly guide me on my problem with the 64 bit on 32-bit OS

Similar Questions

• Problems with the 64-bit on Pavilion a6620f Vista Factory restore

  I had a hard drive failure and restoration on a new hard drive. The original HD is a 500 GB Seagate Barracuda 7200.11 model ST 3500620AS. The new HD is a 500 GB Seagate Barracuda 7200 model ST 3500641AS - RK. I bought a set of restore for this HP computer disks.

  First problem was that disk 1 does not start from the internal CD/DVD drive. My Seagate drive boots fine on the same drive! I used an external USB CD/DVD drive and restore disks worked well on that. I went through the process of factory restore and in the end, I get an error message "installing Windows could not configure Windows to run on this computer hardware." I tried to change the BIOS setting from ACHI and IDE to SATA RAID with no luck. I tried to unplug the USB CD drive before the first reboot. That no longer works.  I unplugged the internal CD drive and tried different combinations with no luck. Need help I have run out of things to try! Does anyone have any ideas/thoughts?

  Hello:

  I don't know how you can get your recovery discs to work.

  Looks like you have tried everything.

  I had problems with mine too and got the same error on a HP Elite 8200 desktop computer business

  It was the first time I've ever had a problem with recovery disks.  It's very frustrating.

  I have a workaround if all goes well, you can use to get Vista on your PC...

  If you can read your 25-character product key MS, you can make your own Windows Vista installation disc. You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them (just before going forward with the actual facility) and they seem to work perfectly.

  Apparently, when you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-VI...

  After you have successfully installed vista, you can download the drivers you need your PC support and driver page.

  Paul

• I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

  I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

  Have you tried:

  Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Problems with the Guide of TV Media Centre in the United Kingdom for the new year?

  Since midnight January 1, no data are available for any channel in the guide, even though it says that it has successfully downloaded the latest announcements of guide. Does anyone else have this problem?

  I tried a new analysis for the services and set up the guide even once.
  P

  Hello PGreenhill,

  Please see the thread below because there was a problem with the program guide in the United Kingdom and Ireland. It must be corrected. If not, let us know.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/the-electronic-program-guide-EPG-for-Windows-Media/923cf081-0607-497d-889c-6424e8299213

  Check also that all your Windows updates are up-to-date.

  Thank you

  Marilyn

• HPL2208w of the problems with the new laptop.

  Hello

  I have a 22-inch HPL2208w monitor, which seems to play on my new laptop Dell upward. The laptop has only a HDMI port, so I connect the monitor's vga cable to the Dell via an adapter.

  The display shows for a few minutes and requires only the range (I guess resolution) be changed to 1680 x 1650. For some reason I can't change the setting of the laptop to that. When I do not change the resolution (only if the monitor is unique and not dual output) the warning message remains on the screen and the screen is not at its best (wise clarity).

  Series Dell Win 7 64 bit, but the monitor was working on my previous Dell with the same version of Windows (with a VGA connection).

  Kind regards

  HA9005

  Hello HA9005,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having problems with the resolution on the HP L2208w 22 '' monitor and a Dell laptop. Unfortunately, as the monitor don't has no options that you can change in what concerns the resolution (it is passed by the laptop), I suggest that you try the Dell Forums for an answer.

  I know maybe it's not the answer you are looking for, but at least you know where to look for the answer now. Thanks for posting on the HP Forums. Have a great day!

• NO - problem with the service

  I am from INDIA.

  I bought an iPhone 6 s new mobile Hong Kong a licensed salesperson (mobile fortress).

  When I bring to the India and put on my country sim (vodafone) to my laptop, everything works, but the network does not connect.

  "In settings > about I see vodafone, but when I see the carrier" is not connected, I tried many solutions online.

  I tried:

  1. all parameters (network... so on) and the software is up to date.

  2 tried selecting the network, but to the carrier, it does not show the available network.

  3. I tried the complete reset of the phone 2-3 times.

  4. I tried to change the apple ID.

  I tried many things, my phone works, but could not solve the network. Cannot make calls or find networks in my I phone.

  Someone can help me. When I went to ask local sales assistance, that's the problem with the change in the country, and they said that it will be free of charge on 18000INR.

  Please someone help me.

  Thanks in advance.

  Hi a.a,.

  Welcome to the communities of Apple Support! I'm sorry to hear that you experience these symptoms with your new iPhone 6 s. I'm a bit ambiguous on your specific configuration or what you see, but you can check that the phone is not locked on the original support (if the phone was sold to any kind of discounts or subsidized rate, it is most likely locked carrier). You can find the information described in the following article useful:

  How to unlock your iPhone for use with another carrier - Apple Support

  You may also be aware that different iPhone models are sold in different regions and countries and can support only specific carriers in these regions, as shown here:

  iPhone - country view with LTE - Apple networks support

  Concerning

• problem with the SM Bus controller driver

  Dear Sir...

  My machine is Hp Pavilion 1150ee g6

  product no.: LX309EA #ABV

  I have windows 7 professional service pack 1

  I am from Egypt

  I'have a problem the appliance cannot read usb flash memory and after I cheked my device manager, I found a problem with the driver for Sm Bus controller (kindlly see attached picture)

  

  so I tried to download the driver from the site sp52791

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = ar & CC = emea_middle_east & DLC = ar & sw_lang...

  But when I installed it I found a wrong message

  kindly I need your support to solve this problem

  Thank you very much for your cooperation

  Nader

  Hello:

  Try the driver directly from Intel...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & ProdId = 816 & DwnldID = 20775 & Keyword = Chipset + Installation + Utility & lang = eng

• Satellite Pro A120: I have problems with the installation of the graphics driver for W2k

  I installed windows 2000 on an A120, the system is fully packed and service updated before I even start to install the necessary drivers, I am unable to restart the system. I once, install as recommended drivers that I have problems with the graphics driver because it will not be installed because it requires a reboot and then I can't install new programs that require a restart that the driver has not been installed correctly.

  The laptop is a Pro A120, age of 1 week and came with XP home, because of this toshiba will not offer me support I changed the o/s even though they obviously support 2000 on this laptop, because they provide the drivers.

  Any ideas would be greatly appreciated.

  Hello

  Did you use and install the drivers from the Toshiba driver page right?
  The drivers of Toshiba W2k for Satellite Pro A120 have been published and are ready!

  But please pay attention to the Toshiba drivers.
  There are two different sets of Satellite Pro A120, with different drivers W2k!
  After choosing the good laptop and download the drivers please follow the proper installation order that is indicated in the document "installation instructions"! Check it!

  I think that if you follow this guide line everything works and runs correctly. Good luck

• Starting problem with the gray screen on iMac

  Hello everyone

  I'm a bit puzzled with a problem I'm having with my iMac 27 "a model late 2009, bought in early 2010, I had built at the time with 8 GB ram, 2 TB HD and fastest i7 Quad core processor available at the time.

  I'm running El Capitan, and all wise OS is perfectly up to date.

  The other week, after a systematic restart, I have a gray screen and little else.  Another reboot and everything was "normal", so I did not concern me unduly.

  Today, after that the Mac had been idle for a time during a call, the screen fell asleep as usual (I do not SLEEP the computer itself), but during his return and touch the SPACEBAR and key "ESC", the screen remains black.

  So I made a forced shutdown and restart.

  I get the screen gray and normal startup (no other sounds) chime followed by the apple logo and the startup progress bar.  He gets to halfway through the long, and then instead of bring to the top of the login page, it's just going to a gray screen Uni.

  So I restarted in safe mode, OK and ran disk utility a couple of times - at the first crossing, he noted, there a problem with the map of partition which can cause problems starting, but on the second passes and the following, everything has been noted to be OK - and the SMART status of disk has been verified.

  After a reboot - the same question as above - of carillon, gray screen with the apple logo, progress bar and then just a gray screen.  I did another secure boot and re-run of disk utility, rebooted into recovery mode and run disk utility.  And again, no problems reported.

  Another reboot and the issue was always there.

  So this time I rebooted into recovery again mode and downloaded a new installation of El Capitan.

  Unfortunately, there is no set - it is always start on a gray screen after the startup chime, the apple logo and progress bar.

  I have also removed all my account account startup items and disconnected all USB devices.

  I'm a bit lost for what to do next to be honest!

  Is there anything else I can do software wise, at home, or is it time for the repair material re shop perhaps?

  Thank you very much for your words of wisdom and support

  Kind regards

  John... :-)

  John here again: :-)

  Just a quick update which may help to determine what the problem is: I restarted in safe mode, after the reinstallation of the operating system was unable to initialize properly - grey screen again.

  However, as I have a home network, I found that I can not connect on the network with my MacBook Pro to the iMac, see all my files user on the iMac and even copy them across to the MacBook Pro with no problems.

  Everything on the iMac is saved via Time Machine on a Western Digital Firewire HD 3to.

  I also have uncompressed manual 'straight' copies of my music, movies, documents folders, etc, for an old time Capsule, currently acting as a bridge to my ethernet network wireless, and provide additional backup for those critical files - my music for example is ripped 350 odd CD, all legally purchased in ALAC on iTunes on the iMac - which represents a couple of months of work... lol... no way I want to lose that!

  So I'm a bit of a loss.  Disk utility reported no problem with the drive... I can boot into safe mode and recovery, but normal mode 'mode '... I always get the chime, the screen with apple logo and progress of the gray bar, then goes to just a gray screen instead of the login page.

  Help!

  My beloved Einstein had a hiccup!

  All comments appreciated and thanks again - hope this extra info helps

  Kind regards

  John... :-)

• Problem with the numbers in the rows of cut and paste

  Hey,.

  I'm new to MAC and now have problems with the help of figures, I brought my windows Excel worksheets. On windows, I could cut a line and paste anywhere on this page and by practice that Excel would fill the void rank where I cut the content. but here on MAC it does not work, why?

  anyway I tried to live with it by cutting a line and for the collage, I used Insert > copied lines for paste swath and add a line for her. but last night I updated the numbers and now by the practice precedes the Windrow is stuck this time with a resized form, the line is resized to a big line.

  Why is this happening? If it can't be fixed, I can go back to a previous version of a number? This update of hate.

  Numbers is excellent NO then you should consider to guide your expectations.

  Cut number refers only to the content NOT the line, or cells.  Select when a row, and then use the cut command that you cut the contents of the cells.

  If you try to move a line from one place to another, you should try this method (which can work for you)...

  Select the line, then click and hold on the header line (up to the line "lift" on the table), the operation slide the line to the destination.

  

  Now drag the line:

  

  Now drop the line where you want to:

  

• Smart Safari search bar, problem with the option 'include suggestions for Safari '.

  Hi all

  I am facing a problem with the search bar Safari Smart of yesterday (January 26, 2016).

  The search bar doesn't work anymore, I can't type, or search or write an http address either. I can only navigate by selecting a bookmark.

  Go to preferences I have all the people with reduced mobility and the disappearance of the problem.

  Then try to isolate the problem, I've found it comes to the "include suggestions of Safari" option in the smart search options.

  Anyone had a similar problem, or have any suggestions on how to get it back to life?

  I must say yesterday, everything working, I have not installed anything new on my Mac.

  Thank you very much!

  Kind regards

  S. Luca

  Try the following steps:

  A possible solution to the problem of address bar: disable the Safari Suggestions

• ThinkPad X 230 Windows 7-64: problems with the screen after updates

  Hi all

  I have a problem with the Thinkpad X 230. After a recent update of Windows 7 (64-bit), the screen resolution is set to 800 x 600 and brightness to the minimum. FN + F8/F9 does not work. The brightness is uncontrolled. I had to restore the system before the update.

  How to solve the problem, do anyone know?

  Thank you!

  Isosik

  Hi Isosik,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the display resolution on your ThinkPad X 230.

  If you have updated the drivers from Windows update, sometimes this kind of problem occurs with windows generic drivers for cause of driver incompatibility, suggest always update drivers only via the ThinkVantage System Update utility. Update only the application of Microsoft Windows Update.

  You can also manually download the drivers from the Lenovo support site.

  Lenovo support site.

  I hope this helps.

  Best regards

  Agnes Kumar

• Equium L10: Problem with the main battery and battery RTC

  Hello

  I have the Toshiba Equium L10 and it is about 14 months old and I have problems with the battery and how much time it takes after a full charge. I also have problems with the RTC battery and an ERROR 0271: check date and time settings message when I turn on the laptop.

  Regarding the battery, I can fully charge it upward in about 3 hours, but when I start to use it, apparently in the last few hours around one and a half or so and then it needs to be recharged. I can have down for about 40 minutes and then turn it off and come back later or in a day or two. How long should I expect from a fully charged battery?

  About the batttery RTC, it really becomes a pain and I only started to get the message of the ERROR 0271 start-up, in recent weeks. I can charge the battery pack and then leave for a few days, but when I turn it on, I get the message ERROR 0271 on the date and time incorrect. Surely after a full charge, the RTC battery should last longer than a few days?

  The manual says that if the RTC battery is exhausted or becomes weak, you must charge the battery of the CCF for 24 hours, in a different part of this manual indicates between 24 and 48 hours, but how can load you for long when the sections concerning the charging battery pack status after charging the battery you unplug the power adapter because leaving connected will shorten the life expectancy of the Battery Pack. So, how we can charge the battery of the CCF for 24 to 48 hours if we shouldn't leave the AC adapter plugged in once the battery is charged - which is nearly three hours. Suggestions about these problems would be appreciated.

  Besides we all know that it is easy to change the CMOS/RTC battery in your desktop base unit, but is it easy to change in a Toshiba Equium L10?

  Concerning

  Brave0

  Hi Brave0,

  The normal recommendation for the CMOS (RTC) battery is to leave the laptop connected to the power supply at least 12 hours when the main battery is fully charged. The charging circuit is going to hijack the current to the load automatically RTC battery and no current will be forwarded to your main battery.

  Recommendation do not leave the power adapter is plugged in the main battery is fully charged is really only applicable to older laptops that used no batteries Li - ion and therefore they had to be completely discharged before recharging to avoid any effect 'memory' of the battery.

  With modern Li-ion batteries, it is quite safe to leave the battery when fully charged and still power the laptop from the AC adapter. The charging circuit will pass all the battery charge if it is fully charged.

  Kind regards

• I HAVE COMPAQ MINI 110 HAVE A PROBLEM WITH THE PASSWORD OF PIOS. SYSTEM HAULT CODE IS; CNU9243TDY

  I HAVE COMPAQ MINI 110 HAVE A PROBLEM WITH THE PASSWORD OF PIOS.

  SYSTEM HAULT CODE IS; CNU9243TDY

  ways to help

  Hello

  Try to enter: e9lo7vfati (3rd character is a lowercase L)

  Kind regards

  DP - K

• HP Envy 17-2100ed: problem with the installation of a driver on my laptop

  Dear readers,

  I have some time for problems with the installation of the drivers on the HP site. Whenever I chose a driver, such as for the Cyberlink Youcam software, the download process will be blocked at 28.9 MB, a total of 154 MB. I also tried to install the software for my HP printer, but once the same question.

  Can someone help me? Thanks in advance!

  Kind regards

  Amir

  Hello @Amirkalloe,

  Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your problems, with the help of the community!

  I came across your post about the problem of driver and he wanted to help!

  Problems installing drivers, or by downloading the drivers?  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  Let me know how it goes.  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!