Kit camera Apple question

Similar Questions

• iPod touch recognized as a digital camera, apple says it's a windows problem

  iPod touch is recognized as a problem digital camera.the says it's a windows problem...

  Hi cuteshey,

  Welcome on the site of Microsoft Windows Vista Community.

   

  Solution 1: Update the drivers

   

  (1) the Device Manager open, either by right clicking on computer and then click on manage, and finally on Device Manager, or by typing devmgmt.msc in the box then find (or run) on the bottom of the start menu and press ENTER.

  (2) find the ipod, he (should) be listed under digital cameras, right click it and choose "update driver software".

  (3) select "Browse my computer for driver software".

  (4) for the location (you must have already installed itunes) use C:\Program Files\Common Apple Mobile Device Support\Drivers (replace C: for what is the letter of your system drive), and then click Next, windows will find the driver here and continue to update the driver
  (5) after the update is complete, click Finish to close the dialog box, then disconnect the ipod and plug it in again.

  Solution 2: This seems to be a known issue with the iPhone and iPod touch from Apple, I would suggest also allows you to check the link that contains the iPhone and iPod touch: Disabling digital camera notification in Windows Vista

  http://support.apple.com/kb/TS1500.

  Juice to ensure that it is not not a Windows problem check the Apple Support Article: iPhone and iPod touch: disable the notification of digital camera on Mac OS X

  http://support.Apple.com/kb/TS1501

  Announcement: Camera, video and photos: answers to frequently asked Questions

  http://discussions.Apple.com/Ann.jspa?annID=779

  Solution 3: If the issue is not resolved, it is recommended to contact Apple for iPod Touch http://www.apple.com/support/ipodtouch to have the best support or you can reach the Dell Forums: http://discussions.apple.com and check for extra support and check if they have new updates on this issue and if they can help fix the same.

  Let me know if that does or does not work. Good luck!

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft Answers Feedback Forum and tell us what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Forgot my Apple question ID and they lock my Apple ID, what to do?

  Forgot my Apple ID question, please help and now they block my account

  Hello. Check these links https://support.apple.com/en-us/HT204106

  If you have forgotten your Apple - Apple Support ID

  If you forgot your Apple ID - Apple Support password

  https://iforgot.Apple.com/appleid

• Compositions for the 3D camera zoom question

  Hello.

  So, I have a question about compositing with 3D in after. I tried to import a drawn to the radius of photoshop 3d object with size 1920 x 1080 with the 3D plugin after and what I want is to turn while the camera's zoom in as in a dolly (from far almost) movement reached a point where the camera switches the object in 3D rotation, which disappears at this point. Streight pretty basic forward camera movement. So what is happening is that while the camera moves forward and to get closer to the object, the objects are pxelate wrong and when the unit is super close, it seems terribly pxelated. I guessed that after that effects condition as image objects instead of the real 3D object then, that sucks semi and so tried to make a larger composition 3D in photoshop then import it to legacy so that when the zoom of dolly-camera movement happens this isn't Pixelize. I made a model of 6000 X 4000 in photoshop and tried to import to after effects and what has happened is that it took about 8 minutes to import the composition (literally) in legacy and when I tried the camera movemenet this has worked, the pixelation-no I mean, but then after effects takes forever to make a change/ram preview or anything at all moving from one image to another takes like 30 seconds or more, even at a quarter of resolution. So obviously I can't work like this at all, especially as it's just a 3D composition which I want to have a lot in the same project. I have a pretty good machine, Quad core i7 2, 3 GB with 8 GB of ram, so there is nothing I can do to improve it. So given this information on what I want to do, can you give any advise how to solve this, if possible? Thank you!

  J

  The only objects that you can move the camera in and no pixelation are vector objects such as Illustrator, shape layers or hidden file strong. In all other cases, when the unit is at the same distance from the layer as the zoom value (object in the center of the model and z = 0, the 1000 camera zoom value, camera centered in the model and z =-1000) the layer is 100% wide and you see pixel for pixel. If you move the camera over nearly half the effective scale scale becomes 200%. It does not take much to end up with a mess.

  Most of the time, if I'm so close, I hide chunks with motion blur.

  With regard to the acceleration of work with large layers I'd watch a downward revision to the resolution of the window of your model (set to 1/4) or learn more about the use of proxies. Get the movement the way you want to look at, light motion blur and make a test.

  If you have really large files you can do the trick of the crop and scale and then stack them in a 3D space and cut between them. Here's the trick. Start with an image that is 10 X the size of your model, duplicate and it reduce by 50%, that duplicate and resize it down 50%. Now crop the original image to 25% of the original size, the second at 50% of the original size of the cultures.  You can do this with the size of the canvas. Leave the last full-size.

  This gives you three images that you can intensify in AE but install away from the camera. The last of them became the wide shot, and as you move in you cut to the next, then the next close of cultures. This keeps the size of the images on 2 X the size of the model, saves a lot of rendering time and makes your publication much easier to manage. The trick is to use the scale property on the first two copies (zoom full width and environment) so that the size of the image corresponds to the next layer below. The broader picture is 400% across (even less), the second 200% scale, and the third left at 100%. You won't have pixilation problems, you will have a more manageable composition and your render time will be reduced.

  I hope these suggestions help.

• Z3 Camera 2 Questions

  1. How can I change the resolution of the camera?

  2. How can I set up a folder customized for the pictures to be taken? I tried to rename the default foler 100ANDRO but when I take a picture it recreates this file!

  1 replace the manual scene, you will be able to change the resolution.

  2. you can't change where the images are stored (only internal or microSD).

• Camera raw question

  I just started to work with the PS, and I wanted to work with a few images I shot in raw.  I downloaded the camera raw 9.2 more the dng converter.  After you have converted all the files, I made the source folder and the destination folder were the same.  The only thing I changed was the name of a file with an extension of dang.  After the batch, I received a message from "successful conversion", and I assumed everything was ok.  I have then rectified to find the files and nothing.  They are not found.  I tried the HD and nothing.  If I open the dang converter again, he wants to convert the original and new files, that I converted.  The files should be somewhere, but when I open the bridge to join the files, I just see the NEF files.  PS will not recognize that so I'm stuck.  What I am doing wrong?  Help, please...  Thank you

  Hi so

  Greetings!

  What version of Photoshop are you using?

  Use the bearing once again the destination DNG Converter as a new folder on your desktop (do not rename the files)

  Then try to open the DNG file in Photoshop

  ~ Assani

• Adobe Bridge / Camera RAW Question

  Hello. Can someone tell me what is the small icon of gray circle with two arrows in there? This icon appears on the RAW image photos after opening a RAW file in Camera RAW using Adobe Bridge. When you hover over it says nothing, when you click on it, it does nothing. I'm assuming that its indicator that the RAW file has been open but side ever since that I can't understand what it represents. Can someone give an idea on that? In addition, after how is opening and editing a RAW file that the changes appear in the preview deck? Is there a way to return the preview to its original state image? Any help would be appreciated. Thanks in advance.

  

  It's called a Badge has parameters.  Check out this link.   http://help.Adobe.com/en_US/bridge/3.0/WS4A4148AC-85AE-4761-9FF0-C88A9A4440D8.html

• Apple Support questions to verify the identity

  can someone tell me when you know your password and do not know security issues and do not have access to the e-mail of recovery that call you Apple for support including apple questions ask you to verify your identity any idea please

  You will need temporary support PIN and an element of personal information associated with your Apple ID.

  (138932)

• facing the front camera is installed on the iPhone 6

  Hello! Please check this. I am aware that there are similar issues with a solution here, but I'm here for a slightly different reason.

  Now I can´t find the email to talk to an official apple which is what I need. I need a to confirm that the movement of the front facing camera is a known problem due to poor/low quality glue and goes without having the phone in a drop of water or any form of damage. This happened to me, I have never dropped my iPhone, but through the daily use (usually, no extreme movement or whatever it is) the device is passed so that the gray "half moon" covers half of the hole for the camera. So naturally I talked to the place where I bought it, it was sent to repair (ish, they never repair, they send you just a new) where we discovered that the iPhone was slightly bent. I was shocked, that I never did anything that could cause such damage, but realized that somehow he had to me. Accordingly, any warranty has been deleted, then they won´t looking at the camera because the phone is folded. I explained that the issue of the camera is well known and he did not as a result of the bending. They do not believe me, and that's why I need a Apple to write me an email saying that the problem is known and that it does not come as a result of the bending. It is the only way that I can return the guarantee for the cameras of sake. The email will be shown the guy from the store that takes care of this. I read higher than (some) iPhones suffers from a bad glue and a half moon appears, but can't find the source. Thanks for any help!

  Sincerely

  Oscar

  While it is true that there are those who knew their glass/screen covering part of their front facing camera, this question can also be reproduced with force by bending from your iPhone. I would have meant you for nothing to happen, of course, but as it is now, there is no way to verify what happened before the others, as the only documentation they have of this is an afterthought. The issue of bending to the iPhone, whose screen is fixed to, and the movement of the screen of his normal place which covered now your camera, are present.

  That aside, however, if you already had Apple inspect this device as it looks like you have, you will need to pursue any other opportunities on this through the same avenue. Contact Apple for support and service - Apple Support

  Wish I had better news for you

• Email/invoice for Apple Music composition, do not know if this is legitimate or a scam

  Randomly, I received two emails today stating that I will be charged £19.99 for a membership of Apple's music that I didn't sign for, I've never even heard of Apple's music.

  I will insert a screenshot of the email below:

  Initial points that made me a thing, it was not an official email apple was the "Apple TM Inv." on the line. When I click on this email address who sent me it shows as: [email protected]

  ALL my bills have never came 'Apple' and the email address: [email protected]

  And also, I do not know someone called Mark, nor do I know anyone who owns an ipod / I don't have an ipod I

  I followed the guide on how to see/Manage my subscriptions, instead of clicking on the link in the email, and it doesn't have a subscription on my account.

  

  I'm sure it's a scam, this look like my recent bills but not the same thing. However, I would like to be sure so that money does not come from my account. Any help is appreciated

  Also, I apologize if this is in the wrong category, none of them seemed to fit my problem in the slightest

  < image edited by host to remove personal information >

  It is a phishing e-mail, you can transfer it to Apple: [email protected] and then delete him.

  Phishing and similar e-mail: Phishing and other suspicious emails

  The phishing emails: identifying fraudulent "phishing" email - Apple Support

  ITunes real e-mails: identification of legitimate on the iTunes Store - Apple Support emails

  (I asked the hosts to remove your first image it contains your account - ID is not a good idea to post personal information on a public forum).

• Support for the new Sony camera RAW files

  I have a new DSLR Sony ILÇE - 6300 Raw image in iPhoto editing is not supported, as the application overview will not load the Raw files.

  Adobe has just updated aps of new cameras, Apple needs to update the app as well?

  The list of supported devices is currently here: Digital camera RAW formats supported by OS X El Capitan - Apple Support

  If your device isn't on the list, you will need to wait for an update.

  You can try the free Adobe DNG converter (Adobe - Adobe Camera Raw and DNG Converter: for Macintosh). If convet you format the photos to DNG, they will always be the FIRST.  Apple photo applications can usually treat the DNG files, if they are not in a compressed format.

• All of the questions

  I'm a longtime Firefox user (version a little older) on XP, up to a few days when I upgraded to Windows 7 (x 64) and new Mozilla. And with this switch came together questions I have not a quite experience earlier.

  • "Firefox is already running but is not responding" occurs quite often;
  • Videos (YouTube) does not at all, or terribly slow.
  • Load basic html websites or not at all; loading videos on every time;
  • Gmail does not (except basic HTML);
  • Navigation search engine lies be Yahoo instead of Google.
  • Mozilla resets restart the computer completely, losing my history, cookies etc. ;

  I can't say what causes these problems, but in general, this isn't even Mozilla ol ' I loved and is more difficult to use. In my opinion, noone ever necessary simplified things, especially if used for what they once were.

  Best regards

  I found the solution. It's called Google Chrome.
  I like Mozilla, but it doesn't like me.
  Good bye.

• Supported the new cameras RAW formats after the update?

  Our trusted list of RAW formats supported by the opening has not been updated for some time: http://www.apple.com/aperture/specs/raw.html

  None of the devices in Digital Camera RAW Compatibility Update 6.17 for El Capitan are on the list of compatibility to Aperture.

  I am pleased to say, that my new Panasonic LUMIX DMC-FZ300 RAW format works well in opening 3.6 on MacOS X 10.11.3 El Capitan nevertheless.

  I would like to hear if other cameras for the latest Digital Camera RAW Compatibility updates also work well in opening 3.6, despite being not shown is not in the list of the opening, but work as part of the El Capitan: Digital camera RAW formats supported by OS X El Capitan - Apple Support

  Supported by Digital Camera RAW Compatibility Update 6.18

  Canon EOS M10

  Canon PowerShot G5 X

  Canon PowerShot G9 X

  Leica SL (Typ 601)

  Olympus OM - D E - M10 Mark II

  Sony Alpha ILÇE-7s II

  Sony Cyber-shot DSC-RX1R II

  Supported by Digital Camera RAW Compatibility Update 6.17

  DxO and ONE

  Panasonic LUMIX DMC-FZ300 / DMC-FZ330

  Pentax K-3 II

  Pentax K - S2

  RAW format fine adjustment of the agreement - the faults of camera Apple for this device--are experiencing abnormally high values for 'Boost' and 'Hue Boost', but the colors and contrast are still very quiet.

  

• Why the new Apple TV is so bad!

  I've recently upgraded to an Apple TV 4. However, the software has changed and it is now much worse. Can you explain why:

  (1) I can't add a favorite television show;

  (2) I can't score TV episodes as supervised or unsupervised;

  (3) scroll down several television series shows lasts too long. No option to see the series individually;

  (4) if I watch a movie of my wish list, it remains on the wish list. I manually delete which is annoying.

  These are questions which worked perfectly on the Apple TV 2 and 3. Why would you do something worse?

  Don't forget Apple aren't here. Only users. It is all explained when registering on the forum. Apple questions must be sent to them.

• Embedded Python import questions (numpy, scipy, h5py) in release mode

  Background:

  I'm working on a scientific application that uses numpy/scipy (Python modules) in the backend for the calculation and h5py for data collection.  My application consists of a layer of UI in QML/C++ calling an embedded digital computations Python interpreter.

  I have compiled successfully cross - the following libraries:

  BLAS, LAPACK, HDF5, Python3.2, numpy, scipy and h5py

  The application under app/native directory structure is as follows:

  + assets

  + qm

  + usr

  + include

  + lib

  + pkgconfig

  + python3.2<- numpy/scipy/h5py="" exists="" within="" the="">

  libblas.so

  libgfortran.so.3

  libhdf5_hl.so.8

  libhdf5.so.8

  liblapack.so

  libpython3.2m.so

  libpython3.2m.so.1.0

  libpython3.so

  So far, I am able to run my application in debug mode and was able to import various Python modules (including plug-ins) without any problem.

  Problem:

  As I approach of realization, I started testing in release mode and noticed the following:

  (1) loading external libraries that are formatted in the works of the file bar (ie: I'm able to call BLAS/LAPACK Fortran libraries HDF5 routines).

  (2) run the Python interpreter works integrated (in the main thread or in a separate thread)

  So, I am able to confirm that the external libraries and the Python interpreter running in release mode, as well.

  Problems occur when I tried importing Python modules:

  (3) import builtin Python modules/packages works without problem

  (4) import of modules/packages with relative path fails.  Example, if I run the command:

  Import numpy

  This works in debug mode but not in release mode.  After further review, it seems that when importing packages, any import with relative path statement will fail.  In release mode, the example above does not have:

  Of. import scimath as emath

  However, the following statement works:

  from .scimath import *.

  I have two questions:

  (1) no assumption whether it is a problem of Python, is a matter of output mode?  I'm leaning toward release mode because the same application runs in debug mode.  I also looked at the python source code and could not see nothing esoteric files IO operations.

  2) based on the observation, it seems that relative paths are handled differently between the Debug and Release modes.  Could someone tell me please to some documentation explaining the differences?  And if there is no such thing as these documents, may provide a brief summary?

  Thank you

  Josh

  Ok.  I think just, I solved my problem.  I will list the observations of first and then another solution that could be useful to someone in a similar situation.

  Bottom Line Solution (if you don't want to read more):

  Apparently, I have compiled my LAPACK library with extended precision of point floating (128 bits) that are not supported on the Cortex A9.  I recompiled LAPACK with double precision.  Running and the import of the application in release mode now works.

  Interesting observations:

  At first, I thought that the dynamic library release mode handles loading differently than the debug mode, because during development, I never came across questions.  As a result, I decided to directly link all libraries that numpy using in my application (even if the application does not use them).  Compile and link all are perfect, but of course, during execution, the numpy failed to load module.

  So I decided to run it in debug as a validation test mode.  Surprisingly, the application will fail at the binding stage!  It gives symbols not try to call the extended precision of the XBLAS library routines (which, as mentioned previously, does not work on the Cortex A9).  At this point, I'm completely flabbergasted that I've been running the application using LAPACK in debug mode without ever seeing this message for almost a year.

  I wondered how is this possible?  I also use the linear algebra of scipy module, calling LAPACK/BLAS routines without problems during development.  In debug mode, I never see this failed or any message indicating that there are unresolved symbols in my the LAPACK library.  In addition, I cross check all calculations against MATLAB/Octave and they are correct.

  Conclusions:

  Here are my conclusions, and if a BlackBerry person can confirm, I'll be very grateful:

  (1) in the mode of publication, the dynamic linker will check each symbol in a shared runtime library.  If no symbol is not resolved regardless of whether your application is used or not, the library of loading will fail.  This does not work in debug mode.

  2) there is a potential bug (not sure) in the linker which also behaves differently between the debug mode and release mode.  In debug mode, the linker cannot link a shared library if no symbol cannot be resolved despite the executable not referencing them.  In release mode, the linker will not FAIL.

  If the two above are met, then I would make a suggestion to change behaviors such as build step and run step behaviors are aligned between them.  Please let me know if it's intentional or if I should file a bug report.

  Thank you
  Josh

  PS: Btw, I also built a Fortran cross compiler in case you're wondering how I managed to compile the BLAS and LAPACK for BlackBerry.