Lab view fpga: device driver for virtex 5

Similar Questions

• Does anyone has found a device driver for the Tablet the Pan TC970?

  Original title: - that someone has found a device driver for the Tablet the Pan TC970?  Thank you

  Someone has found a device driver for the Tablet the Pan TC970 and do I need a

  to transfer the data from my laptop to Tablet?  Thank you

  Hi Youbetya,

  Are which driver you referring?

  I suggest you to see the following link to transfer the data from the Pan TC970 Tablet laptop.
  http://lepantab.com/index.php?option=com_content&view=article&ID=70&Itemid=85

• I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  Hello

  I suggest to refer to this link, scroll down to error code 41 and follow the steps and check if that helps:

  http://support.Microsoft.com/kb/310123

  It will be useful.

• Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Original title: the answer useful?

  Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Where can I find a device driver for a HP Deskjet 3630?

  * Original title: HP Deskjet 3630

  where can I find a device driver for a HP Deskjet 3630

  This link may redirect you

• Windows 7 can not find a device driver for my Bluetooth compatible iPhone 3G

  Windows 7 can not find a device driver for my Bluetooth compatible iPhone 3G

  Click Start > devices and printers > add a device, make sure that Bluetooth is turned on. For additional help, see the following link:
  http://www.Apple.com/support/iPhone/ http://www.activewin.com http://adacosta.spaces.live.com Andre Da Costa

• I need a device driver for this printer by Ricoh mp161l

  I need a device driver for this printer by Ricoh

  The hardware manufacturer is the only scource of drivers for their hardware

• External hard drive not a letter from reader: I already installed device driver for the same thing and it's showing in disk management.

  External hard drive not a letter from reader: I already installed device driver for the same thing and it's showing in disk management. But when I checked in system information, it is also displayed device but sectors and the tracs where showing the value 0.

  Hello Sharan,

  These links may help:

  http://TechNet.Microsoft.com/en-us/library/cc750198.aspx

  http://TechNet.Microsoft.com/en-us/library/cc977219.aspx

• Do not install the device driver for iPhone on Windows 7, computer does not recognize iPhone is plugged

  I have Windows 7 and all of a sudden my iPhone 3 G will not sync with my laptop.  The computer has stopped recognizing the phone being connected at all, and yet he is recognized in iTunes.  When I plug in the phone it gives me the message... device driver failed to install.  I know it of a compatibility problem and have searched through the forums and was on the phone with the support of Apple for FOUR hours and nothing has worked.  They even sent a new phone, and it still does not work.  HOW can I find the driver that needs to be updated?  I checked in the device under the universal Bus Port Manager and it indicates that the Apple driver is up-to-date.  He sometimes let me to sync my contacts and calendar errors... but without music, photos, ringtones, etc.  Help, please... I lost tons of time on it!

  Hi regsiler,

  I suggest to open the Device Manager and in the view tab, click Show devices. Remove all instances of the device, and then restart.

  The phone begins to change when it is connected to the computer?

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Equium - Windows cannot load the device driver for USB dongle

  I've been using a dongle for about a month without problems, but now it is said (in Device Manager) "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  -what it means and how can I solve this problem?

  Hi Ozcat,

  What USB dongle is that exactly?
  What cell phone do you have?
  What operating system is installed?
  Have you already tried to reinstall the driver for USB dongle?

• Satellite Pro 6000: Base system device driver for XP

  Hello

  I want to install the:
  M - systems diskonchip 2000

  and the:

  Base system device

  On my Satellite Pro 6000 (XP).

  Does anyone know what I need to install drivers?

  Hello JR

  Did you install chipset driver?

  On this page of European driver for Toshiba-> * Archives *!

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• HP PAVILION A1007W: NEED DEVICE DRIVER FOR THE CONTROLLER ETHERNET FOR HP PAVILION A1007W DESKTOP / WINDOWS OPERATING SYSTEM 7

  Hi all!

  I have a HP PAVILLION a1007W desktop, which took the windows xp operating system.  I installed the windows 7 Home premium operating system and have found that I can't get online.

  Device Manager tells me that the driver for the multimedia audio controller is missing as well as the driver of ethernet controller.  The driver needed is:

  PCI VEN_1039 & DEV_0900 & SUBSYS_2AO4103C.

  I HAVE LOOKED EVERYWHERE AND CAN NOT FIND THE NECESSARY DRIVER.  Of course, the PC doesn't help if I can't get online.

  Any help will be greatly appreciated!

  Thank you, Pat

  Hello:

  I try the XP driver and try to install manually if auto installation does not work.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-29695-1 & CC = US & DLC = in & LC = on & os = 228 & Product = 501309 & sw_lang =

• Could not load the device driver for DVD/CD-RW - Satellite 1110

  I have a Satellite 1110 and something has gone wrong with my DVD/CDRW and it will not read any CD. It is reported as a CARPET * A UJDA730 DVD/CDRW but the device status is shown as:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I tried to uninstall and reinstall the device, but the error just return. I can't find a driver to make it on the web site of the manufacturer or Toshiba. I don't want to use the product recovery CD because it means I'm losing all software and data on the hard drive.

  Can someone advise how to recover from this situation?

  Thank you

  Hello

  First of all you n t a driver for the CD/DVD drive. The drive uses the standard Windows OS driver and it s not necessary to install additional.
  I suppose that there could be something wrong with the registry entry.

  Please check this forum announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843

  The user has used the statement that has been proposed on the site of Microsoft.
  This should help.

  Please post again if this method is successful.

• Windows XP cannot load the device driver for the CD burner. The driver may be corrupted or missing. (code39)

  I have a HP Pavilion running on XP.

  Device Manager displays the following material: A: HP CD Writer CD16b

  B: pioneer DVD - RomDVD - 116.

  Both have the dreaded yellow symbol showing that they are not working (they do not show in Windows Explorer)

  By clicking on the two points of product

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (code39).

  I created the 'properties' of each machine that pilots should be:

  For a. imapi.sys, redbook.sys c:\windows\system32\storprop.dll, pfc.sys and similarly for B machine.

  I copied imapi.sys, redbook.sys, and storprop.sys from another XP computer (which works well), deleted these drivers and pasted in the replacements.

  Does not cure the problem.

  Now the pilot 'pfc.sys' cannot find anywhere else. Click on the driver generates (v 2.1.0.165 Inc. - Padus ASPI Shell)

  I'm out of my depth now. No idea what is ASPi Shell.

  Help, please

  The problem is most likely the pfc.sys.

  What I would say, is to follow the steps under "Windows XP" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

  Following steps should remove pfc.sys which may have been left to the wire after that uninstall of software associated with the readers.

  Here is some info on the pfc.sys:

  http://www.Neuber.com/TaskManager/process/PFC.sys.html

• Error installation software device driver for removable devices in Windows Vista x 64

  I have Windows Vista x 64 installed on my PC and nVidia Forceware motherboard and graphic cards.

  When I plug in any removable drive into my USB 2.0 port, Windows starts the installation of the device driver software and then sees it as an unknown device. The dialog where he asks me if I want to 'locate and install driver software', 'Ask Me later' or 'don't show this message for this device.

  I select the recommended option: "locate and install driver software.

  I click 'Continue' when Windows asks me permission to continue.

  Then, when the execution of the installer of the software in the bottom right of my screen, the installation of driver software for device, it shows "unidentified device failed.

  Then another window pops up saying this:

  "Found New Hardware - device unknown".

  Windows encountered a problem installing the software driver for your device

  Windows found driver software for your device but encountered an error trying to install it.

  Kodak

  An error occurred during the installation of the device:

  The driver for this device is missing a necessary entry. Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor.

  If you know the manufacturer of your device, you can visit their website and check the support section for driver software. »

  That's what he does when I'm trying to connect my Kodak Easyshare M550 digital camera. I would go ahead and contact Kodak, but the problem seems to extend to ANY removable device on my computer.

  For example, I have a Lexar Flashdrive. When I plug it into my USB 2.0 port, it Windows says the following:

  "Windows needs to install driver software for your USB Flash Drive", etc...

  'Install the device driver software', 'USB Flash Drive search Windows Update'...

  Then a window opens asking me to "insert the disk that came with your USB key. Problem is that no driver disk not supplied with the hardware that Windows Vista is supposed to come with the drivers. I know this because the camera and usb flash drive worked very well until I reinstalled Windows Vista on my new hard drive (new installation, because my old hard drive crashed) and I've NEVER had to install device drivers for Windows to recognize it as a removable drive and operate automatically.

  Also, I installed Daemon Tools Lite and I had to manually "Update" the device driver to point to the "Windows\INF" folder in my hard drive, after copying the cdrom files needed for the specific subfolders for windows to let the program assign a drive letter for the drive virtual it creates.

  I think that perhaps not all device drivers have been installed when I installed Windows Vista, this time. If that's the problem, I don't know how that could happen, nor how to fix it, but I really prefer to find a way to solve this problem without reinstalling Windows Vista again. I don't mind not manually install the drivers as long as someone can show me what files to copy and where to find them on the Windows Vista disk that I bought at Microsoft. I KNOW that Windows HAS come with these drivers.

  If anyone knows how I can fix this, please tell me, because it's ridiculous to not be able to use any removable device readers (except for the use of all Flash drives). Thanks in advance.

  I know it can be frustrating to solve problems.

  (A) was this post or hibernation sleep?

  Microsofts troubleshooting KB

  http://support.Microsoft.com/kb/928631

  (B) the bios settings

  First of all you do not state if you tried to see if there was a setting in bios disabled USB ports during the startup. Or how the bios was set to install devices automatically. If you check your manual site or the motherboard manufacturer

  It will tell you which key to press. And where your USB ports are on or off. Some systems do not have to turn on or off.

  Plug n play OS on conscious

  could help Vista automatically recognize your USB

  (C) what version where do you use? SP1? or gold?

  (D) USB hubs may cause problems just be hubs. Power connected?

  (E) and of course if it is a case check connection in the right port. Return panel slide? plugged into port back?

  Hope something here helps

  Keith