Label each point on the diagram of dispersion

Similar Questions

• How can I add a response at the end of each point of the issue in a list of questions and send back to the sender?

  I have emails that require some points to address such as "Please fix leak in the bathroom sink' and then the next line will be another application and so on. I would like to answer each question at the end of each line with a response (preferably in a different color to stand out police) such as "Yes - will fix" or "that cannot be done" or "you'll have to fix that yourself." So, I want to send this reply to the original sender.

  It is probably easiest to copy and paste the initial list of questions in your answer, first of all and then add your comments.

  If you have the problem that the list numbers change when you try to add your comment about a new line, try to make your line breaks using shift + enter instead of the entry.

• Point set Label above point on the form?

  My apologies if this has been listed here. I could not find with the research I've done.
  
  In my data entry form, I want to put the labels of items entrable top of the fields. I looked at the label (optionally with help) model, but it looks like that just the label itself handles. I don't see a way to get to the #BODY # of the region (region without buttons or title) do it either.
  
  Are we stuck with having always our labels in column to the left of the items in a form?
  
  I hope not and knowing a minimum necessary?
  
  Thank you
  
  Stew

  For the element, set Begin on the new line = YES and start the new field = Yes

  Then to the label set "Horizonal/Vertical Alignment" 'at the top'.

  (It's in v4.0.1.)

• How to configure subdomains pointing to the folder of your site

  I am trying to determine if it is possible to implement a series of subdomains such as each points to the content in a folder in your site with the URL of the pages showing the sub-domain without the name of the subfolder.

  The case in question... If I have a Web site to say with subfolders mysite.com.au, dir01 and dir02 which contain each pages I have to show in what concerns subdomains. I created sub02 and subdomains sub01.

  Is it possible to have my work site of BC as I can reference a page, let's say page01, in the subfolder to be displayed with the name of subdomain as sub01.mysite.com.au/page01 rather than see it as mysite.com.au/dir01/page01

  I know I can do the homepage for the subdomain to a page in the folder, but it still shows the subfolder in the url - I want the pages in the subfolder to be associated with the subdomain and show/use url based on the subdomain without reference to the subfolder.

  Is it possible and if yes what is a simple process or complex to implement?

  Hi Ricardo,

  In addition you don't no need to do it at all, especially with the liquid to get what you say... This isn't what Greg asks however. He doesn't want the subfolders.

  Hi Greg, because it's not true accommodation separated, you can't configure it in British Colombia as your request, such that a page will always sit in a folder. The only way to achieve this is to make sure that all of your pages to sit in a root and named differently.

• Label/Reward Points Forum OBI SE1 forums message

  Hi Justin,
  
  could we have it please message Forums label/Reward Points for the [OBI SE1 | http://forums.oracle.com/forums/forum.jspa?forumID=404] forum?
  
  Thank you & see you soon,.
  C.

  Fact.

• Is it possible to create a tag that lists the individual labels [keywords] for each position? The current {tag_blogtaglist} creates an endless list of tags.

  Is it possible to create a tag that lists the individual labels [keywords] for each position? The current {tag_blogtaglist} creates an endless list of tags.

  If you can get hands on with the ID of blog post that you can list the tags assigned to this post particularly blog using module_data. It would be only possible with the new BC. Active following rendering engine. Here are some resources to point you in the right direction: how to activate the BC. Next - http://docs.businesscatalyst.com/developers/liquid/introduction-to-liquid#enable how to use module_data - odule_data http://docs.businesscatalyst.com/developers/liquid/consuming-apis-in-the-front-end-using-m install app BC API discovered to get you started on the syntax - http://docs.businesscatalyst.com/developers/apps/bc-api-discovery module data that lists the tags assigned to a blog post looks like this: {module_data = 'blogposts' version = "v3" field resource = subresource 'tag' = "tags" resourceId = collection "303870" = "myData"} resourceId is the blog ID to render tags for. Hope this helps, Mihai

• Point to the bar chart data label

  Hello

  I need to display the value (which appears as a ToolTip to move the mouse) on the top of each chart, so that users can display numbers without the mouse hovering over each bar. I can't find the option. Do any one help please?

  Thank you

  Open the properties of the graph-> title and labels - >-> Display Options for the data markers-> Show-> Show data labels always

  Mark nicely so useful/full

  Thank you

  AJ

• Change the color of the point to a point on the page label

  I have several page elements that have labels. My customer wants to change the default color of some of the labels of page elements be of different colours on the page so that they stand out. Can I do this? I can change the color of the data in the actual cell, but I can't change the color of the label.
  
  Example:
  
  ARTICLES: < given here >
  
  I fill the < data here > with a column in a table. I can change that, but what they want to change me is the color of the type in the label ELEMENTS:
  
  Could someone tell me please the process for this if possible.
  
  Thank you
  Patti

  Patti,

  You can do this by adding some CSS where you have the point label.

  Change the desired page element, goto label box, add the CSS label. For example,.

  Item:
  

  I hope this helps.

  -Chris

• Trace the path creates just a point at each point?

  Hello, recently I have upgraded to the latest version of Photoshop and it worked fine until that for any reason any my trace the path does not create a path of stoke?

  It creates just in points with regardless of the size of brush I selected (as shown below)

  It worked great for awhile til all of a sudden he did this.

  Help, please!

  

  The left and here is the front and next to him (two points) is the after.

  IM think I owe him a few hidden command or something so really appreciate som help with this so I could get back to the thing, I was working on the far right

  Thanks for reading.

  Check in the Bush Panel and make sure that the spacing is checked, in the field of brush tip shape.

• How to annotate the diagram?

  I need to annotate the following table with the values in the column of the brand.  I would like to a symbol appear for each date in this column.  The values in the column of the brand are calculated simply by subtracting a constant from a date in the Date column.

  

  Here's what it looks like if I try to include the column of the brand:

  

  Any ideas how to make this work?

  HI ' space,.

  The chart you are using is a graph of the category. Cards draw one or more sets of values in a list of categories.

  Your chart uses data listed in column A of the table (column heading) as labels for categories, spaced along the x-axis of the chart.

  The values in column B (not a column header) are plotted against the y-axis.

  When you add a second set of values to the table (in column (C), and then include this series in the chart, this series is added to the graph and the scale of the axis is automatically adjusted to account for these values (more on that below).

  You will notice that the four values in this column are placed on the card directly above the values in the same row in column B. Each value in the same row is attached to the same category, and each category in the list in column A is assigned to a post also spaced on the x (x-axis).

  Given that the values in column C are derived by "subtracting some constant of a date in the Date column' these values are also dates. If you want to note these dates on the x axis, the x axis should be a value axis, rather than a category axis.

  Digit has two types of graphics plot values against values - the scatterplot and the bubble chart. The appropriate choice for this task is the dispersion diagram.

  Category graphics take the line header and the column header labels.

  Values for scatter graphs cannot be placed in the column header or header lines. So the first place, needing a change is the Table.

  Click on any cell in column B (Delta) and press option + left arrow to insert a new column (non-en-tete) to the left of column B. Label the Date column and copy the dates in column A in this new column B. Note that these must be Date values and actual time, which can be formatted to display as those of the current column.

  Columns B and C now contains the first set of pairs x - y for the new diagram. Column D (Mark) will contain the values of x for the second series. Add a new column (E) to the right of column D to hold the values of y associated with brand x values in column D. These values will determine to what extent above the x axis each mark will appear. With the current range of value y (43-104), you can consider placing these brands with a value of 38 next to each date in the column of the brand.

  The result would be similar to this:

  

  Kind regards

  Barry

• Using ListView with ArrayDataModel displays only the first element in each QVariantMap within the matrix

  I have this QML who have a ListView with datasource to a full ArrayDataModel from the CPP file for creationcompleted, I loop in the table to add the hour together to appear as a label on the page, what works. However, when I want to view these items in the list, it will display only the first element of the QVariantMap within the table, no error on the log of the device. Also, triggered more does not work, but when I click it, it will have a blue border surrounding it, but the onTriggered does not fire.

  Here is an excerpt of the CPP on the table fill

  This-> eventsModel = new ArrayDataModel();

  QVariantMap event;

  event ['EventName'] = "Event1";

  event ["EventHour"] = "00";

  event ["EventMinute"] = "01";

  event ["EventSecond"] = '02 ";

  QML-> setContextProperty ("eventsModel", it-> eventsModel);

  Here's the QML

  {Of container

  ID: eventListContainer

  {To ListView

  ID: eventList

  dataModel: eventsModel

  Use a ListItemComponent to customize the appearance of the list view

  listItemComponents:]

  {ListItemComponent}

  type: 'point '.

  {StandardListItem}

  Title: 'Event' + ListItemData.EventName;

  Description: "time:" + ListItemData.EventHour + ":" + ListItemData.EventMinute + ":" + ListItemData.EventSecond; "»

  }

  }

  ]

  onTriggered: {}

  var selectedEvent = dataModel.data (row);

  var eventDetailPage = eventDetailDefinition.createObject ();

  eventDetailPage.txtEventName.text = selectedEvent ['EventName'];

  eventDetailPage.pickEventTime.value = picker.dateFromTime(selectedEvent["EventHour"]+":"+selectedEvent["EventMinute"]+":"+selectedEvent["EventSecond"]);

  eventDetailPage.open ();

  }

  }

  Any help would be appreciated.

  Thank you.

  ListView determines ItemType of the element by calling the function itemType of the dataModel. By default, an ArrayDataModel returns an empty string for this call (see https://developer.blackberry.com/cascades/reference/bb__cascades__arraydatamodel.html).

  This leaves you with a few options:

  (1) If you have no header and all the elements are the same, you can make

  ListItemComponent {
       type: ""
       ...
  

  (2) If you have headers or different elements, you can extend ArrayDataModel and implement your own function of itemType

  (3) you can define a function of ItemType on your ListView in QML. Documentation:

  ListView called DataModel::itemType() for each item in order to know the type. QML, this can be overridden by declaring the itemType function (data, row) on the ListView element. ListView then call this function instead of the function DataModel.

  Here's how to create a list in QML which creates a header for all items on the high level and aStandardListItem for each item below the top level:

• Need a Script to the space of images on a total gap, then tag each image with the percentage of the total image space

  By editing the other scripts, I found here and other sites (including the labels size rorohiko), I worked on a script that will each image with the dimensions of the label and calculate the percentage of the spread of everything (including the text, white space).

  Now, I was invited to a script that tagged the images with the percentage of total image on a gap space. This script is so space images on a total gap, then tag each image with the percentage of the total image space. For example if there is an image that is 10 x 10 inches and four pictures that are images of 2.5x2.5, 10 x 10 would be tagged with 50% and the 2.5x2.5 would be tagged with 12.5%.

  This is the script that does the percentage of total circulation. Can some clever person get to do what I need?

  Suze

  (Sorry, I don't know how to post the script here with line numbers!)

  //

  This script adds printing of information labels to each graphic image. The labels are on a separate layer

  named "PercentageLabels" so that all these added labels can be removed again by simply removing

  the layer.

  //

  If you move or resize items, simply re-run the script to update the labels.

  //

  Before (re) start the script, you can define a paragraph style "SizeLabelStyle".

  This style will apply to all content on labels.

  //

  Before (re) start the script, you can set a style of object 'SizeLabelObjectStyle '.

  This style of object apply to all executives of the label - so if you want a specific background

  fill out or frame, do it through this object style.

  //

  You can change the units of the size label. I put in inches. Change the line below that has

  kUnitToUse - you can use:

  MeasurementUnits.CENTIMETERS

  MeasurementUnits.CICERO

  MeasurementUnits.INCHES

  MeasurementUnits.MILLIMETERS

  MeasurementUnits.PICAS

  MeasurementUnits.PIXELS

  MeasurementUnits.POINTS

  //

  By default the script will not attempt to label the "nested" images If you also want to label

  nested images (for example inline images, anchored frames, pasted images in the images,...) to change the line

  below to read:

  kLabelNestedItems = 1

  //

  If you want a specific image to stay without a label, you can use the Script label palette for

  assign a script called 'ignore' for this frame. The script will then not label this framework to the

  the title of the script is removed again.

  //

  Change the lines with kDontLabelImageFrames, kDontLabelTextFrames, kDontLabelOtherFrames

  below if you want to restrict labelling to only certain types of images: replace the '0'

  in "1" to enable these options.

  //

  Change the line with kShowImageFileName if you also want to display the names of the image in the

  size for the picture frames.

  //

  Small frames are not labelled - the cutoff point is currently a less than 0.1 inch high framework

  or 0.1 inch wide. You can change the cutoff point by adjusting the lines with kDontLabelBelowWidth

  or kDontLabelBelowHeight below.

  //

  var Girard;

  var gScriptFile;

  var gCaches;

  // ****************

  That's cheating spread automatically calculated

  var doc = app.activeDocument;

  doc.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.inches;

  doc.viewPreferences.verticalMeasurementUnits = MeasurementUnits.inches;

  PageWidth = doc.documentPreferences.pageWidth var;

  stucture var pagewidth = * 2;

  var spreadheight = doc.documentPreferences.pageHeight;

  var spreadsquinch = stucture * spreadheight;

  Alert ("the total measure of square inch of spread is:" + spreadsquinch);

  //******************

  VR;

  {

  If (app.activeScript instanceof file)

  {

  var gScriptFile = app.activeScript;

  }

  }

  catch (Girard)

  {

  }

  If (typeof (kLogLevel) is "undefined")

  {

  const kLogLevel = 5;

  const kMaxLogNestLevel = 5;

  const kLogToMessageBox = 0;

  const kLogToConsole = 0;

  const kLogToFile = 0;

  const kLogFileName = "PercentageLabels.log";

  const kIgnoreFrameLabel = "ignore."

  const kSizeLabelLayerName = "PercentageLabels";

  const kLabelNestedItems = 0;

  const kDontLabelImageFrames = 0;

  const kDontLabelTextFrames = 1;

  const kDontLabelOtherFrames = 0;

  const kUnitToUse = MeasurementUnits.INCHES;

  const kShowImageFileName = 0; This set to 1 to precede the name of the image file in the tag

  Below all of the measures are expressed in kUnitToUse (e.g. inches if MeasurementUnits.INCHES is used)

  const kRoundToDecimals = 2;

  The separator to use between objects - for example MyImage.jpg - 7.22 x 9,34

  const kSeparatorBetweenNameAndSize = "-";

  const kSeparatorBetweenHeightAndWidth = "H x"; "

  const kSeparatorAfterWidth = "W";

  const kDontLabelBelowWidth = 0.1; In kUnitToUse

  const kDontLabelBelowHeight = 0.1; In kUnitToUse

  const kLabelStyleName = "SizeLabelStyle";

  const kLabelObjectStyleName = "SizeLabelObjectStyle";

  const kLabelHeight = 0.6; In kUnitToUse

  const kLabelWidth = 2.5; Expressed in kUnitToUse (e.g., inches).

  }

  var gRunState =

  {

  logToMessageBox: kLogToMessageBox,

  logToConsole: kLogToConsole,.

  logToFile: kLogToFile,.

  functionNestLevel: 0,

  logFunctionEntry: true,

  logFunctionExit: true,

  logLevel: kLogLevel,.

  logFileName: kLogFileName

  };

  Main();

  // ****************

  function ConvertToFrame (thePageItem)

  {

  / * / / / LogEntry ("ConvertToFrame");

  var retVal = thePageItem.getElements () [0];

  / * / / / LogExit ("ConvertToFrame");

  Return retVal;

  }

  // ****************

  function CollectionToArray (theCollection)

  {

  / * / / / LogEntry ("CollectionToArray");

  var retVal = theCollection.everyItem () .getElements () .slice (0);

  / * / / / LogExit ("CollectionToArray");

  Return retVal;

  }

  // ****************

  function GetImageFile (pageItem)

  {

  / * / / / LogEntry ("GetImageFile");

  var imageFile = null;

  do

  {

  Try

  {

  pageItem = ConvertToFrame (pageItem);

  If (!) (("allGraphics" in pageItem))

  {

  break;

  }

  var allGraphics = pageItem.allGraphics.slice (0);

  If (allGraphics.length == 0)

  {

  break;

  }

  var chart = allGraphics [0];

  var graphic.itemLink = link;

  imageFile = new File (link.filePath);

  }

  catch (Girard)

  {

  }

  }

  While (false);

  / * / / / LogExit ("GetImageFile");

  return imageFile.

  }

  // ****************

  function GetImageName (pageItem)

  {

  / * / / / LogEntry ("GetImageName");

  var imageName = "";

  do

  {

  var imageFile = GetImageFile (pageItem);

  If (imageFile is nothing)

  {

  break;

  }

  imageName = imageFile.displayName;

  }

  While (false);

  / * / / / LogExit ("GetImageName");

  return imageName;

  }

  // ****************

  function GetOuterPageItem (pageItem)

  {

  / * / / / LogEntry ("GetOuterPageItem");

  var retVal = null;

  do

  {

  Try

  {

  retVal = pageItem.parent;

  If (retVal instanceof spread | retVal instanceof Page)

  {

  retVal = pageItem;

  break;

  }

  If (retVal instanceof character)

  {

  retVal = GetOuterPageItem(retVal.parentTextFrames[0]);

  break;

  }

  }

  catch (Girard)

  {

  retVal = null;

  }

  }

  While (false);

  / * / / / LogExit ("GetOuterPageItem");

  Return retVal;

  }

  // ****************

  function LogMessage (message, collapseLines)

  {

  If (gRunState.logToConsole)

  {

  $.writeln (message);

  }

  If (gRunState.logToFile)

  {

  var logFile = new file (gScriptFile.parent + "/" + gRunState.logFileName);

  var now = new Date();

  logFile.open ("a");

  logFile.write (now.toString () + ":"+ message + "\n" ');

  logFile.close ();

  }

  If (gRunState.logToMessageBox)

  {

  Alert (message);

  }

  }

  // ****************

  LogEntry (message) function

  {

  If (gRunState.logFunctionEntry)

  {

  If (gRunState.functionNestLevel < kMaxLogNestLevel) {}

  for (var idx = 0; idx < gRunState.functionNestLevel; idx ++)

  {

  message = "" + message;

  }

  Filled (message + "<", true);

  }

  }

  gRunState.functionNestLevel ++;

  }

  // ****************

  function LogError (message)

  {

  If (gRunState.logLevel > = 1).

  {

  LogMessage ("* ERROR *:" + message, false);

  }

  }

  // ****************

  function LogExit (message)

  {

  -gRunState.functionNestLevel;

  If (gRunState.functionNestLevel < 0)

  {

  LogError ("LogExit: unbalanced nesting of function");

  }

  If (gRunState.logFunctionExit)

  {

  If (gRunState.functionNestLevel < kMaxLogNestLevel) {}

  for (var idx = 0; idx < gRunState.functionNestLevel; idx ++)

  {

  message = "" + message;

  }

  Filled (message + ">", true);

  }

  }

  }

  // ****************

  function LogNote (message)

  {

  If (gRunState.logLevel > = 3)

  {

  LogMessage ("Note:" + message, false);

  }

  }

  // ****************

  function LogWarning (message)

  {

  If (gRunState.logLevel > = 2)

  {

  LogMessage ("WARNING:" + message, false);

  }

  }

  // ****************

  function Main()

  {

  / * / / / LogEntry ("Main");

  var savedUserInteractionLevel = app.scriptPreferences.userInteractionLevel;

  app.scriptPreferences.userInteractionLevel = UserInteractionLevels.NEVER_INTERACT;

  do

  {

  Try

  {

  activeDocument var = app.activeDocument;

  If (!.) (activeDocument instanceof Document))

  {

  LogError ("hand: activeDocument isn't a Document");

  break;

  }

  var savedHorizontalMeasurementUnits = activeDocument.viewPreferences.horizontalMeasurementUnits;

  activeDocument.viewPreferences.horizontalMeasurementUnits = kUnitToUse;

  var savedVerticalMeasurementUnits = activeDocument.viewPreferences.verticalMeasurementUnits;

  activeDocument.viewPreferences.verticalMeasurementUnits = kUnitToUse;

  var savedRulerOrigin = activeDocument.viewPreferences.rulerOrigin;

  activeDocument.viewPreferences.rulerOrigin = RulerOrigin.PAGE_ORIGIN;

  do

  {

  Try

  {

  ProcessFrames (activeDocument);

  }

  catch (Girard)

  {

  Alert ("the script encountered a situation that we don't know how to handle. "He received the error, says '" + Parker + "' in Main()"); "."

  }

  }

  While (false);

  activeDocument.viewPreferences.rulerOrigin = savedRulerOrigin;

  activeDocument.viewPreferences.horizontalMeasurementUnits = savedHorizontalMeasurementUnits;

  activeDocument.viewPreferences.verticalMeasurementUnits = savedVerticalMeasurementUnits;

  }

  catch (Girard)

  {

  Alert ("the script encountered a situation that we don't know how to handle. "He received the error, says '" + Parker + "' in Main()"); "."

  LogError ("Hand throw" + Girard);

  }

  }

  While (false);

  app.scriptPreferences.userInteractionLevel = savedUserInteractionLevel;

  / * / / / LogExit ("Main");

  }

  // ****************

  function ProcessFrames (doc)

  {

  / * / / / LogEntry ("ProcessFrames");

  var err;

  do

  {

  If (!.) (doc instanceof Document))

  {

  LogError ("ProcessFrames: doc should be a Document");

  break;

  }

  Try

  {

  var existingLayer = doc.layers.itemByName (kSizeLabelLayerName);

  existingLayer.id;

  existingLayer.remove ();

  }

  catch (err)

  {

  }

  If (kLabelNestedItems)

  {

  var pageItems = doc.allPageItems.slice (0);

  }

  on the other

  {

  var pageItems = CollectionToArray (doc.pageItems);

  }

  var frameReferences = [];

  for (var pageItemIdx = 0; pageItemIdx < pageItems.length; pageItemIdx ++)

  {

  do

  {

  var pageItem = pageItems [pageItemIdx];

  If (pageItem.itemLayer.name is kSizeLabelLayerName)

  {

  break;

  }

  var pageItem = ConvertToFrame (pageItem);

  If (instanceof TextFrame pageItem)

  {

  If (kDontLabelTextFrames)

  {

  break;

  }

  }

  ElseIf (pageItem graphic instanceof)

  {

  If (kDontLabelImageFrames)

  {

  break;

  }

  }

  on the other

  {

  If (kDontLabelOtherFrames)

  {

  break;

  }

  }

  If (pageItem.label.toLowerCase () is kIgnoreFrameLabel)

  {

  break;

  }

  var width = pageItem.geometricBounds [3] - pageItem.geometricBounds [1];

  var height = pageItem.geometricBounds [2] - pageItem.geometricBounds [0];

  If (width < kDontLabelBelowWidth)

  {

  break;

  }

  If (height, kDontLabelBelowHeight)

  {

  break;

  }

  frameReferences.push (pageItem);

  }

  While (false);

  }

  var sizeLabelLayer = doc.layers.add ({name: kSizeLabelLayerName});

  for (var pageItemIdx = 0; pageItemIdx < frameReferences.length; pageItemIdx ++)

  {

  Try

  {

  var pageItem = frameReferences [pageItemIdx];

  var width = pageItem.geometricBounds [3] - pageItem.geometricBounds [1];

  var height = pageItem.geometricBounds [2] - pageItem.geometricBounds [0];

  var labelItem = doc.textFrames.add (null, LocationOptions.BEFORE, GetOuterPageItem (pageItem));

  labelItem.itemLayer = sizeLabelLayer;

  var boxsquinch = width * height

  var boxpercent = (boxsquinch / spreadsquinch) * 100

  var roundpercent = Math.round (boxpercent)

  var labelText = "";

  If (kShowImageFileName)

  {

  var imageName = GetImageName (pageItem);

  If (imageName! = "")

  {

  labelText += imageName + kSeparatorBetweenNameAndSize;

  }

  }

  labelText += RoundString (height, kRoundToDecimals) + kSeparatorBetweenHeightAndWidth + RoundString(width, kRoundToDecimals) + kSeparatorAfterWidth + ' \r\n'+ roundpercent + '% ';

  labelItem.contents = labelText;

  xPos = pageItem.geometricBounds var [1];

  yPos = pageItem.geometricBounds var [0] + kLabelHeight;

  labelItem.geometricBounds is [Posy, xPos, yPos + kLabelHeight, xPos + kLabelWidth];.

  Try

  {

  labelItem.parentStory.characters.everyItem () .appliedCharacterStyle = doc.characterStyles.item (0);

  }

  catch (err)

  {

  }

  Try

  {

  labelItem.parentStory.paragraphs.everyItem () .appliedParagraphStyle = kLabelStyleName;

  }

  catch (err)

  {

  }

  Try

  {

  labelItem.appliedObjectStyle = doc.objectStyles.itemByName (kLabelObjectStyleName);

  }

  catch (err)

  {

  }

  }

  catch (err)

  {

  }

  }

  }

  While (false);

  / * / / / LogExit ("ProcessFrames");

  }

  // ****************

  function RoundString (numVal, decimal)

  {

  / * / / / LogEntry ("Round");

  var retVal = Math.round (numVal * Math.pow(10,decimals)) + "";

  retVal = retVal.substring(0,retVal.length-decimals) + "." + retVal.substring(retVal.length-decimals);

  / * / / / LogExit ("Round");

  Return retVal;

  }

  What do you mean?

  var myDoc = app.activeDocument;
  var mySpreads = myDoc.spreads;
  var myRectangles = myDoc.rectangles;
  var myImages = 0;
  for (var i = 0; i < mySpreads.length; i++) {
      var mySpreadWidth = 0;
      var mySpreadHeight = myDoc.documentPreferences.pageHeight;
      for (var j = 0; j < mySpreads[i].pages.length; j++) {
          mySpreadWidth += myDoc.documentPreferences.pageWidth;
          }
      var mySpreadArea = mySpreadWidth * mySpreadHeight;
      var myImages = mySpreads[i].rectangles;
      var myTotalImageArea = 0;
      var myIndividualImageArea = [];
      for (var j = 0; j < myImages.length; j++) {
          var myImageGeometricBounds = myImages[j].geometricBounds;
          var myImageWidth = myImageGeometricBounds[3] - myImageGeometricBounds[1];
          var myImageHeight = myImageGeometricBounds[2] - myImageGeometricBounds[0];
          myIndividualImageArea[j] = (myImageWidth * myImageHeight);
          myTotalImageArea += myIndividualImageArea[j];
          }
      for (var j = 0; j < myIndividualImageArea.length; j++) {
          alert("Image percentage of total images on spread " + (i + 1) + " = " + (myIndividualImageArea[j] * 100) /myTotalImageArea);
          }
     alert("Total image percentage on spread " + (i + 1) + " = " + myTotalImageArea);
     }
  

• Go to the site to point to the chronology of edge on a menu off the edge

  Is it possible to navigate to a point on the timeline of a menu that is located outside the entertainment on board?

  I have an updated file in place, which has about six screens on it.  Each screen represents a different browser tab.  The actual file has left and right buttons which create a scrollbar on the right to the left or towards opposite.  It works very well.  Each transition is marked with a tag, for example 'Slide01', 'Slide02' etc, and I use | SYM. Play ("Slide01"). wisely.

  What I have to do is to create a menu on a web page that takes a user directly to the exact point of the animation.  For example, the second navigation option would lead to the second screen of the edge file.

  Any help would be greatly appreciated.

  Hi, Samuel-

  You can access the object Edge animate using the AdobeEdge.getComposition API (compId) JavaScript of your external page.  From there, you can call play() on a label and play from that point.  So if you had an external menu, you can map each element menu external to a label and jump to the correct location.

  Hope that helps,

  -Elaine

• Graph waveform repeats with each iteration of the loop

  Hi guys,.

  I got some great responses from you many already, so I hope you can help me once more!

  I try now to simply take a voltage that is measured by a sensor, I tied to AI1, and I built a graph of very simple waveform using a DAQ assistant. I have the setup terminal to CSR, the acquisition value continuous sample mode and read samples and rate game to a control on the Panel before which I can control myself. All this is a while loop that is needed to collect data over time.

  However, the problem I have is that for each loop of the loop, it seems, to reset the graph, so my x-axis never increases over time, ideally I want it to do is to show results through from 0 to 100 on the x-axis to say, and then, when it comes to 101, he will start again on the extreme left of the graphic to the right to a crossing another 100 points given) (there's a term for this, but I forgot, sorry!). To be honest, this kind of logic like everything in the loop will be restarted, but after trying to chart the loop it does not work, so I'm fresh out of ideas.

  I think I might have to do is to manually build segments of data acquisition (DAQ mx) and have only certain parts of them in the loop, although I can't be sure. I tried various examples and online on the database of NOR (including tension-int acq & graphic clk which works well in the examples, but not at my request) but no luck for now

  If anyone can think of what could be the problem, then please let me know. FYI the sensor is optical fiber if it makes a difference. I have attached the file VI that I did does not really...

  See you soon!

  Ritchie

  Since you use a chart there is no way to fix it. If you choose to go to a XY chart you could solve this problem. See the example below.

  

• Draw a line connecting two points in the WPF chart

  I'm trying to understand the best way to draw a line between two existing points on my graph in WPF.  At first, I thought I had it works fine; I just added another parcel to my graph then given exactly two points for rendering.  But I quickly noticed that the app has become surprisingly slow and CPU was quite high (adding other plots does not affect the use of the CPU as long as they have a complete set of points (?)).  He wants me if I looked at using the DataToScreen method on the chart but I can't know what the parameters are.  The second parameter is simply an IList that tells me a lot.  This seems to be the method I want to use for the coordinates of a point on the graph screen.

  No one knows what the second parameter is supposed to be for the DataToScreen method?  Everything I tried throws an Exception of Argument.

  Thank you
  Dan

  DataToScreenwill return a screen coordinate in the plot area of a chart of the value of the raw data horizontal and vertical in the given list. The parameter value is a IList for compatibility with other methods of graphical query such as FindNearestValue , return IList values containing raw data.

  A concrete example, say you had a graphical configuration with a wide horizontal axis ranging from 0 to 100 and a vertical axis double precision ranging from 10 to 20:

  
          
              
              
          
      

  To get the screen coordinates of the value at the center of the two axes, you can call:

  graph.DataToScreen(plot, new object[] { 50, 15.0 })

  Note that the raw data values corresponding to the type of axes (horizontal AxisInt32 returns the integer 50 and vertical AxisDouble Gets the value 15.0 ).

  You also mentioned a performance issue where "adding other plots does not affect the CPU so that they have a complete set of points". I did a simple test app that adds an array of two points of a chart on each key (for example graph.Data.Add(new[] { new Point(x1, y1), new Point(x2, y2) }); ), but could not reproduce the problem you saw. Could you share the code, you use to draw the connection line?