Label 'for' attribute does not not as expected inside the af: region

Similar Questions

• My Thuderbird for mac does not delete messages from the server and can not find the setting in tools to do.

  According to the forum users, you go to tools-> account settings and there should be a box to "leave the message on the server" that I can uncheck, however, I don't see that my Thunderbird program for mac.

  You use the POP or IMAP protocol by e-mail? I guess that IMAP because you do not see the option.

• Does not work from inside the DMZ after configuring the ACL.

  Hello

  According to the concept of ASA, trafuc of the Interior (100 s) DMZ (50 Sec) is allowed by default. When I try to write an acl (host to host block) on the Interface inside, no other traffic runs to and from the Interface on the inside.

  Everything is blocked. Previously no ACL has been mapped to the inside Interface.

  Kindly help me to solve this problem and also provide the document concerning the behavior of the firewall before and after configuring the ACL.

  Poster of the acl that you entered. Remember, there is an explicit deny a whole at the end of the acl. So if you want only to prevent access to a dmz machine, then it must be written correctly. Leave what you want enable dmz, deny the rest of the demilitarized zone, and then leave all the rest.

• For each does not properly in the XSLT file to two loops on a single node

  Hi all
  
  I'm transforming 2 inputs to a single target using XSLT. Both of the target entry of the same pattern and have the child element.
  In the XSLT, I gave this condition.
  "< xsl: for each select="$Variable1.payload/ns1:BookStore/ns1:Books ">
  < xsl: for-each select = "/ ns1:BookStore / ns1:Books" >
  "< xsl: if test="$Variable1.payload/ns1:BookStore/ns1:Books/ns3:BookId = ns3:Books / ns3:BookId ">
  
  My second for each does not work and in the target, I'm getting double elements. Help, please. Here are two xml source and xml desired target.
  1 XML source:
  
  < bookStore >
  < book >
  Name1 < name > < / name >
  author1 < author > < / author >
  < ID > 1 < / BookId >
  < quantity > 2 < / quantity >
  < price > < price / >
  < status > < / status >
  < book >
  < book >
  name2 < name > < / name >
  Author2 < author > < / author >
  < ID > 2 < / BookId >
  < quantity > 2 < / quantity >
  < price > < price / >
  < status > < / status >
  < book >
  < book >
  < name > NAME3 < / name >
  author of 3 < author > < / author >
  < ID > 3 < / BookId >
  < quantity > 2 < / quantity >
  < price > < price / >
  < status > < / status >
  < book >
  < / book >
  
  XML source 2:
  
  < bookStore >
  < book >
  < name > < / name >
  < author > < / author >
  < quantity > < / quantity >
  < ID > 1 < / BookId >
  < price > 100 < / price >
  < status > < / status >
  < book >
  < book >
  < name > < / name >
  < author > < / author >
  < quantity > < / quantity >
  < ID > 2 < / BookId >
  < price > 200 < / price >
  < status > NA < / status >
  < book >
  < book >
  < name > < / name >
  < author > < / author >
  < quantity > < / quantity >
  < ID > 3 < / BookId >
  < price > 300 < / price >
  < status > < / status >
  < book >
  < / book >
  
  Desired target XML:
  
  < bookStore >
  < book >
  Name1 < name > < / name >
  author1 < author > < / author >
  < ID > 1 < / BookId >
  < quantity > 2 < / quantity >
  < price > 100 < / price >
  < status > < / status >
  < book >
  < book >
  name2 < name > < / name >
  Author2 < author > < / author >
  < ID > 2 < / BookId >
  < quantity > 2 < / quantity >
  < price > 200 < / price >
  < status > NA < / status >
  < book >
  < book >
  < name > NAME3 < / name >
  author of 3 < author > < / author >
  < ID > 3 < / BookId >
  < quantity > 2 < / quantity >
  < price > 300 < / price >
  < status > < / status >
  < book >
  < / book >
  
  Thank you

  Hello

  It will not work like that... To do something like the following... Only one for each...

  
    
    
      ns1:Name
      ns1:Author
      ns1:BookId
      $Variable1.payload/ns1:BookStore/ns1:Books[ns1:BookId = $bookId]/Quantity
      $Variable1.payload/ns1:BookStore/ns1:Books[ns1:BookId = $bookId]/Price
      $Variable1.payload/ns1:BookStore/ns1:Books[ns1:BookId = $bookId]/Status
    
  
  

  I don't have to check the syntax, but you get the idea...

  I hope this helps...

  See you soon,.
  Vlad

• Firefox for Mac does not recognize a valid SSL certificate

  Firefox for Mac does not recognize the SSL certificate that is valid for this site, I got: https://www.georgeglazer.com. It gives a warning "not reliable." However, the Firefox for Windows does not give a warning. This happens even if I clear the cache and it happens in the Mavericks and OS of Yosemite. The certificate is up-to-date and with Comodo. Firefox for Mac is now the only browser producing these errors (v. 39, put updated) - Internet Explorer, Safari and Chrome are not. Our hosting provider has said it's probably a browser issue, perhaps having to do with intermediate certificates in Firefox being obsolete. I really hope you'll solve the problem, as it's annoying for us when we're going to do right by our customers and pay for the SSL certificate. I have attached a picture of the warning and the other from what you see on a PC: a pop-up that says it is a verified SSL certificate and gives details about the issuer, the period of validity, etc.

  COMODO should you sent a link to download the file 'bundle' containing the intermediate certificates. Who needs to go in the same directory as the certificate of your site. If you are using a control panel, your host can probably help with this process. And if you bought through them, shame on them for not taking care of this for you already!

• the update of firefox 28 for mac does not, the bar just rotates, I can't get the update

  the update of firefox 28 for mac does not, the bar just rotates, I can't get the update. Thank you

  Hello

  Try to get the full version here:

  • All versions

  Then just install it.

• I'm having a problem where Firefox keeps asking for my password to Amazon, even if I tell Firefox NOT to remember this password. In Firefox options, Amazon is clearly recognized as a site for which does not save passwords.

  I'm having a problem where Firefox keeps asking for my password to Amazon, even if I tell Firefox NOT to remember this password. In Firefox options, Amazon is clearly recognized as a site for which does not save passwords.

  Do not remove the navigation, search and download history on Firefox to clear the "Site preferences".

  Compensation of the "Site Preferences" clears all exceptions for cookies, images, windows pop up, installation of software and passwords.

• How can I download the drivers for a processor that crashed and does not have access to the internet

  How can I download the drivers for a processor that crashed and does not have access to the internet.  The drivers seem to be the problem.

  How can I download the drivers for a processor that crashed and does not have access to the internet.  The drivers seem to be the problem.

  First of all, please note that you mean a computer, not a cpu.  "CPU" means "Central processing unit". In modern personal computers, the CPU is a relatively small chip, an integrated circuit. It is located on the motherboard inside the computer case. It is not the case itself, nor is it the total computer, which includes the case and what it contains.

  Download drivers on another computer and put them on CD or thumb. Bring them to the computer in question, and then copy them there.

• Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. » __

  Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. »

  UM. I have no idea what that means, I never had that in my 20s I was using a computer.  Please help, someone!

  You can get the Chkdsk to run in the General Windows interface by following these instructions?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking. Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive. If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  Your command prompt Mode works without failure or a boot?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  It works if you test with another user, you will need to create one to test with?

  System Restore and the System File Checker is able to fix anything?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  Have you tested malware?  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntispyware
  http://SUPERAntiSpyware.com/

• Software Bloggie Touch does not work because of the DEP - I can't turn off DEP for this program

  Original title: software Bloggie Touch does not work because of the DEP

  I downloaded the Bloggie Touch (Sony) software, but the function of prevention of execution of data in Windows Vista prevents me from using it. Any suggestions? I contacted Sony and they had me re-download the software on their site, but it did nothing. I tried to reset the DEP to allow the Bloggie software, but he says that the processer wouldn't let me do that. Message: I can not turn off DEP for this program.

  Any help would be appreciated.

  Hello
  the only other thing you can do is to do a Bing search for how to turn off dep.
  There are several options (not recommended by the way)
  b Eddie

• My Windows Update does not seem to recognize the need for updates

  My Windows Update does not seem to recognize the need for updates to the programs... This has happened for a long time. It will only recognize the updates of Microsoft Security Essentials, but when he checks the updates it points only to the basics of security. I don't know there are updates that Microsoft Updates jumps...

  msft777jf,

  Check the 2nd Tuesday of each month - later in the day. (after 10:00 Pacific time)

  06/06 / 1107:38: 16 pm

• Adding images dynamically - tutorial for examples does not work

  I am using the SDK Gold and work through the tutorials. I want to add dynamically images of C++. The tutorial that I use is here:

  https://developer.BlackBerry.com/cascades/documentation/dev/integrating_cpp_qml/ (under the heading "Injecting C++ objects in QML").

  I have copy and paste the main.cpp, TestApp.hpp and TestApp.cpp into a new project. He compiled and ran on my device, but when I click on the button 'Add the container' seg application vulnerabilities and ends.

  I understand that this is caused by a NULL pointer, so I added:

  This-> mRootContainer = new bb::cascades::Container();

  for the Builder. Now it does not segfault when I press the button 'Add the container', but again, it does not actually add the container (it adds nothing visible).

  How can I use the concepts described in this tutorial to add an image at run time?

  I managed to understand. The example provided in the tutorial defnitely badly, which is very annoying and frustrating for those of us learning to code for BB10. Not only that, but the "barrier to entry" is hard enough, and if Blackberry to their ecosystem to flourish, documentation and tutorials must be accurate and easy to follow.

  The constructor should be something like:

  TestApp::TestApp(bb::cascades::Application *app) : QObject(app)
  {
    QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
    qml->setContextProperty("injection", this);
    Page *appPage = qml->createRootObject();
    mRootContainer = appPage->findChild("rootContainer");
    app->setScene(appPage);
  }
  

• Help, please. 13 elements Photoshop for Windows 10: Photo Editor does not open even if the Organizer open OK. What should I do?

  Help, please. 13 elements Photoshop for Windows 10: Photo Editor does not open even if the Organizer open OK. What should I do?

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• I have CS5 which does not seem to handle the FIRST for Sony RX100M3. Don't CS6?

  I use a 10.9.5 OSX computer

  I use photoshop CS5, which does not seem to handle the FIRST for Sony RX100M3. Don't CS6?

  Although photoshop cs5 will not open files Sony RX100M3 camera raw, you can use the adobe dng converter to convert them to dng best, which photoshop cs5 should then open.

  Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 9.1.1

  Camera Raw: How to use Adobe DNG Converter - YouTube

  Regarding photoshop cs6, Yes, it will open these files with the 9.1.1 update to the camera raw plugin, but I would consider the plan of creative photography of cloud

  instead of buy photoshop cs6, since adobe very probably won't be updated photoshop cs6 more including the new cameras camera raw plugin.

  http://www.Adobe.com/creativecloud/photography.html?promoid=KTMBM

• I got a notification of update for adobe CC but it does not work and now the Office does not

  I got a notification of update for adobe CC but it does not work and now the Office does not

  I actually just finished with support on a cat and it was corrected. Thank you.