labels and stars

Similar Questions

• Label and legend chart Question

  I must be missing something because I can't the small white boarder to disappear from the gauge label and the legend.  I tried each property node option - except apparently the right pair.  Can someone help get rid of the white border around 'PERCENT', which corresponds to the label and the 'EFFICIENCY', which represents the legend?

  Here is the updated control with transparent background.

  

• Under the version release candidate of Win7, I was able to run Civilization 4 and Star Fleet Command 3

  Under the version release candidate of Win7, I was able to run Civilization 4 and Star Fleet Command 3.  Now, after installing Win7 Ultimate licensed version, I can't play either of these games.  I followed all the recommendations posted on this site and others but have not been able to solve the problems.  CIV 4 does not work due to the cd when cd is in the drive and just SFC3 locks the computer.  I really like Win7, but think to give up and reinstall Windows XP, which would be a major undertaking at this stage.

  Help, please.

  Thank you
  JGBrown

  Here are my system specs:
  Windows 7 Ultimate (x 64) (build 7600)
  Board: Gigabyte Technology Co., Ltd., EP43-UD3L
  The bus clock: 266 megahertz
  BIOS: Award Software International, Inc. F3 25/02/2009

  Intel Core 2 Quad Q6600 2.40 gigahertz
  cache of 64 kilobytes main memory
  cached secondary memory 4096 kilobytes
  64-bit ready
  Multi-core (4 total)
  Not hyper-thread
  Usable 8192 MB of memory installed
  4 hard drives
  4500.91 GB drive hard usable capacity
  1763.18 gigabytes of free disk space

  NVIDIA GeForce 9800 GT [graphics card]
  Westinghouse L2410NM [Monitor] (24.0 "live, June 2007)

  Hello Squidoutofguam.

  Games don't work under Linux at all accepts by emulation, and to be honest with the applications as big and complicated as the games will not have much success.  They are written for Windows.

  More details without some its going to be hard to solve the problems.  Obviously something is not configured properly with your machine, or there may be hardware problems at work here.  I had no problem with SimCity 4 or Civ 4 (even if I use a crack no CD for Civ 4) on my machine (64-bit).

  The first thing I would do would be to get the latest drivers for your video from the nVidia Web site card.  The second thing I would do would be to close all background applications, and finally then I would probably run a test on your RAM, (just search Windows Memory Diagnostic in the Start Menu).  I have also try to create a new user account and try the games under this one.

  If you could be more specific with what games works, by Microsoft do you mean the built-in Windows games, or titles such as Age of Empires, Halo or Gears of War?  And how they work not, error messages, crash dumps etc.  This would help. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• What programs are getting extract comments and keywords and put them in the labels and captions in Picasa?

  What free programs I would like to extract comments and key words and put them into computer-based labels and legends Picasa? Is this possible with MSVB 2008 or 2010 Express? I'm not a real programmer, but I can hack a bit (in the old sense of the 1980s the word hack). I tried searching internet but no combination of the words comment, tag, keyword, and legend get something usable. Too common words, everything matches. BTW, I use XP, cannot afford to Windows Vista SE (that's my name for 7)

  What I want to do is to add tags and comments to the photos that I am scanning. It is a long-term project to archive all the family of the peaks. Some dating back to 1900 photo of great great grandparents. The key here is long-term. I thought that the properties/summary/comments (and keywords) would be likely to be on board for many years (legacy stuff). Jac I can't find any program that uses or leans on them today! And I just saw a pic of the Win7 properties and guess what? No summary! Picassa is quite widely used but who knows. Nothing is stable for a long time. Can not even get to diskettes and CDs and cassettes now become more difficult to find. And DVDs are on the side too. How can I put the photos on the long term and accessible storage?

  My plan is to use Picassa and .jpg. I'll put a copy of Picassa on every DVD that I use (in data mode). I'll do a mode DVD video slide show as a backup. The disks are pretty cheap even for me. I will not use double layer, but too unreliable. And I intend to check them every few years for readability. I have a few CD that can be read even with 12 years older data recovery programs.

  So if anyone has any comments, suggestions or additions, let it go. I think that it is indeed an important subject, keeping old data accessible.

  Hello

  You can post the issue here for more information:

  https://groups.Google.com/a/googleproductforums.com/Forum/#! categories/picasa/picasa-for-windows

• PasswordEditField with no label and no initial value

  I have a custom password field (PasswordEditField extension) and I wonder what would be the correct values to pass to the first two arguments of the constructor to get no labels and no initial value, but still be able to set the style bit.  Should they be "null" or just an empty string ("").  For example:

  public final class PasswordField extends PasswordEditField {
  
      private static final int MAX_CHARS = 255;
  
      public PasswordField(long style) {
          super(null, null, MAX_CHARS, style);
          // ...or...
          super("", "", MAX_CHARS, style);
      }
  
  }
  

  The two seem to work the same, I was wondering which is more appropriate.  Don't see anything in the documentation to pass null.

  empty string

• field label and text field editing in vertical field Manager

  Hi, am new to the blackberry development. Developing an application in which I placed the field label and modify the field in the Manger of two vertical field and place them in a horizontal field Manager, but when run the present I don't see the label text field I see am doin BB 4.7, following is my code

  LabelField name = new LabelField ("first name :")
  {
  public void paint (Graphics g)
  {
  Super.Paint (g);
  g.setColor (Color.BLACK);
  Do police = this.getFont (.derive(Font.DROP_SHADOW_RIGHT_EFFECT |)) Font.ENGRAVED_EFFECT, h);
  this.setFont (do);
  }
  };
   
  FirstName = new EditField ("Name", "", 25, EditField.FILTER_DEFAULT |) FIELD_RIGHT) {}
  {} public void paint (Graphics g)
  getManager () .invalidate ();
  Do police = this.getFont () .derive (Font.DROP_SHADOW_RIGHT_EFFECT |) Font.ENGRAVED_EFFECT, h);
  this.setFont (do);
  g.drawRect (6, 0, (int) (Display.getWidth()/1.8), getHeight());
  Super.Paint (g);
  }
  };
  HorizontalFieldManager hrMgr = new HorizontalFieldManager();
  final VerticalFieldManager vfMgr2 = new VerticalFieldManager();
  VerticalFieldManager vfMgr1 = new VerticalFieldManager()
  {
  protected void sublayout (int width, int height)
  {
  int w = (int) (Display.getWidth () - vfMgr2.getPreferredWidth () - 20);
  Field field;
  int fieldCount;
  int x = 0;
  int y = 0;

  fieldCount = getFieldCount();
  int d = (int) ((Display.getWidth()/4.5));
  for (int i = 0; i)< fieldcount;="">
  {
  field = getField (i);
  setPositionChild (field, x, y);
  layoutChild (field, w, height);
  y += field.getContentHeight ();
  }
  setExtent (d, a);
  }
  };
  vfMgr1.add (Name);
  vfMgr2.add (FirstName);
  hrMgr.add (vfMgr1);
  hrMgr.add (vfMgr2);
  Add (hrMgr);

  The same a s job well if put a choice field of object instead of text edit field is I see the field and choice of subject field in a single line, but is not in the case of text editing field, please help me on this point, Thanhs beforehand.

  Thanks for your valuable reply Mr.simon,

  But I have reached my goal by adjusting the width of vertical field nursery and got a solution... These are the changes I made in my sublayout...

  protected void sublayout (int width, int height)
  {
                  int w = (int) (Display.getWidth()/1.3);
  Field field;
  int fieldCount;
  int x = 10;
  int y = 0;

  fieldCount = getFieldCount();
                int d = (int) ((Display.getWidth () / 3));
  for (int i = 0; i)< fieldcount;="">
  {
  field = getField (i);
  setPositionChild (field, x, y);
  layoutChild (field, w, height);
  y += field.getContentHeight ();
  }
  setExtent (d, a);
  }
  };

• Alignment of label and SimpleTextField

  Hi all

  Is there a built-in method to align all labels and values as the ObjectList control done automatically on 4.6? In other words, the label is left justified, but the field is right justified.  I find that given the difference between the field and its entry - while poor design of a full application size, it gives a much more aerodynamic look on a small screen.

  This is the default alignment:

  First Label: FirstFieldSecond Label: SecondFieldThird Label: ThirdField
  

  This is the alignment that I'd like to see

  First Label:               FirstField
  Second Label:             SecondField
  Third Label:               ThirdField
  

  The label is left-aligned, while the field is right-aligned and right-justified.

  I tried a simple solution by a LabelField (FIELD_LEFT) and a SimpleTextField (FIELD_RIGHT) to a HorizontalFieldManager, but the two fields are always to the left without the space between the two. My other thought is to extend FieldManager to explicitly place the fields - giving etiquette, the minimum size and maximum width SimpleTextField possible - but I still need to justify the text in this area which I was not able to make the right successfully.

  Alternatively and perhaps better to give a consistent experience across devices with larger screens, would be the alignment as

             First Label: FirstField          Second Label: SecondField           Third Label: ThirdField
  

  It's the label fields are right justified in the field wider label. and value fields are justified to the left in the same field.

  Ideas/suggestions? I'd appreciate also your comments on whether it's worth the practice - is acceptable default alignment for you?  Your users seems acceptable/usable without any major problems?  As to the incompatibility between the alignment of text and labels, vs objectlistfields fields (this is what bothers me the most..)?

  Thank you

  Marc

  Take a look at the UserListScreen in the example below.

  How to-backup and restore of small amounts of data using SyncItem
  Article number: DB-00092

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800625/How_To _...

  Out of the box, she will achieve the results that match your third example.  For ages in the right-aligned sample, add the "LabelField.USE_ALL_WIDTH". Style DrawStyle.RIGHT"age LabelFields.  This is the alignment you want (your second example).

• The data including labels and descriptions added to a photo in the photo library remains with photo

  original title: data including labels and descriptions added to a photo in the photo library remains with the picture even if I switch to a new computer without photo gallery

  I have some family photos and historical photos for my family genealogy. I am tagging these and adding descriptions such as when and where they were taken and that the opportunity was, etc. This information will always be with digital photography when I send to someone or see it on another computer?

  I have some family photos and historical photos for my family genealogy. I am tagging these and adding descriptions such as when and where they were taken and that the opportunity was, etc. This information will always be with digital photography when I send to someone or see it on another computer?

  ============================================
  Some metadata is stored in a database exclusive and is
  not written back to the photo files.

  If you right click on a photo and go to... Properties Summary / tab.
  Tip... you can see the data included.

• Cannot display label and percentage together for camembert

  Hello

  When you use the chart to sectors dvtm MAF element, we have the ability to 'Slice Label' to pieDataItem.

  If we do not give the Label "Slice" then % values are displayed as shown in the attachment Slice_label_NOT_given.png

  If we give the Label 'Slice' then the given label is coming but not the values of % as indicated in the attachment Slice_label_given.png

  We do not want to display the caption separately and we want to display the value of the label and set %

  with the value % under the label of each slice, as indicated in the attachment Expected_behavior.png

  Please suggest a way to implement this without manually calculating the values of %

  Thank you

  Suresh.

  Hello

  Thanks for the details describing your problem. Please check the details below. Therefore, use LD_TEXT_PERCENT. Please check the details below. Please do not hesitate to score useful or correct if you find it for other purposes.

  Pie charts to calculate and display the default percentage values. An application has the ability to have the pie chart to display percentage values and / or numbers used to calculate percentages. To configure what is displayed in the slice of the pie label, textType attribute can be defined and accepts the following values (LD_VALUE, LD_PERCENT, LD_TEXT, LD_TEXT_PERCENT).

  Thank you
  Amey

• How to set the color of the label and hintText inputText

  Hi all

  I use jdev 11.1.2.4.0 version

  in my case, I want to label and hintText the color of the amx:inputText component.

  so I create a class css "myStyle. CSS '.

  < skin-added id = "s1" >

  > skin id < mobileFusionFx < / skin-id >

  css/mystyle.css < name-sheet-style > < / style sheet name >

  < / skin-add >

  < / adfmf-skins >

  Thank you

  Manish

  If you can't find things yourself, you're going to struggle.

  http://www.Ateam-Oracle.com/debugging-MAF-applications-on-Android/

• [JS] How to show the label and the name of the object?

  

  Hello.

  This image is FrameLabel SDK sample.

  I want to show the label and the name that I set as image.

  For example,.

  App.Selection [0] .label = "label";     App.Selection [0] = [TextFrame object]

  App.Selection [0]. Name = "name";

  What is show and code to set property?

  You can not via JS, unless first do you a plugin to c ++ as that in the SDK and make it scriptable.

• I have 5 Lightroom on a new Mac - I have the original label and the number of services.  When I try to enter, I get a message that the serial number is invalid.  What can I do

  I have 5 Lightroom on a new Mac - I have the original label and the number of services.  When I try to enter, I get a message that the serial number is invalid.  What can I do

  Thanks - Yes, it's the LR5.

  2 hours on the phone with Adobe technical support, it is fixed.

  I guess it was a mistake with the original installation.

• Height of a VBox with label and wrapped text

  Hello

  I have a VBox with label and text wrapped inside. The sentence in the text are from an external location and load in the text. I want to know the height of the VBox after that the text was being wrapped and place inside the VBox.

  I used all the properties for VBox as getHeight(), getPrefHeight(), getMinHeight() and getMaxHeight(), but these properties give me what I want.

  Is there another property I am missing or is a short coming of VBox?

  If this is a shortcoming of VBox, what other solution do I?

  Thank you

  AA

  You can register a listener with heightProperty() of the vbox and get it when it changes.

• Clip of Label and name not automatically update in the timeline panel

  I just finished a major project, so now that he has the time to take the plunge and upgrade first. So far, it's fine, but the clip labels and names only are not automatically updated in the timeline panel when I change into the bin. Is this something that only works on new projects (rather than old projects updated in this new version)? Or...?

  Go to the menu file > Project Settings > general, and when the component of the project opens, check the box 'display name of project items and label color for all instances.

  

  MtD

• LR will recognize ratings, labels and keywords of the bridge?

  I bridge on my laptop and tend to import pictures to my laptop first before transferring them on my main computer which has LR on it. If I add ratings, labels and keywords in Bridge, those will transfer more and the images when I add them to my catalog on my main computer?

  Thank you.

  Yes, they should although there may be a bit of disconnect with labels depending on how you have defined what mean labels in bridge vs the way they are interpreted in LR.