Labels of bubble in figures

Similar Questions

• Labelling of bubble chart

  I have a bubble chart where each doctor is its own bubble, and I have about 18 bubbles.
  
  Is there a way to make the labels on a bubble chart be the doctor's name, rather than the number of cases doctor eash? With 18 bubbles, it is difficult to tell the legend, what color corresponds to what bubble, as many colors is similar...

  Have a look here:

  http://obiee101.blogspot.com/2008/01/OBIEE-XY-and-data-in-mouse-over-label.html

  concerning

  John
  http://obiee101.blogspot.com

• Satellite Pro L100 - where to find the plastic lid frame?

  Hello

  I put t really know if this is the right place to post this?
  I have a satellite Pro L100. I had for about 2 years.

  On the first day, I had problems with plastics in the screen and the "lid" two cracks they been replaced twice.
  Today already, I need to buy a new one but I run problems trying to find part numbers.

  I know as L100 model number but they keep asking for a number three-digit and I have no idea where to find it.

  So on that help in would be great.
  Also how can I find the part number for the plastics?
  It happened at the stage where the screen is about to fall!

  Please help, thanks

  Hello

  Usually the laptop model number and serial number are at the bottom of the device!
  There are different labels and one of the labels should provide these figures.

  Then you can contact the Toshiba ASP in your country to order framework compatible display.

  I put t know the part number, but I m the ASP would be able to help you

  Matt comes to the Paris

• Pavilion dv6t - 6 c 00: recovery/boot drive for a Pavilion DV6t - 6 c 00

  I have a dv6t - 6 c 00 with a ssd drive that out crapped on me.  I want to replace the SSD by another but cannot find my recovery disc I made when I bought it.  When I do a search of the web site, so I can order one, I find three different principles, but not sure it it could have been.  How can I choose the one he could have?  For the life of me I don't remember.

  • HP Pavilion dv6t - 6 c 00 CTO Entertainment Notebook PC
  • HP Pavilion dv6t - 6 c 00 CTO Quad Edition Entertainment Notebook PC
  • HP Pavilion dv6t - 6 c 00 CTO Select Edition Entertainment Notebook PC

  What are those found on the web site.  Anyone has an idea on what to look for on the computer that could tell me.  I watched all the tags inside and outside.

  Thank you

  Please try one of the following methods to locate the name or product number. DO NOT include your serial number.

  Figure: Example of label Service HP

  

  Figure: example of a window system HP information

  Figure: Example of product number HP Support Assistant

  

  Figure: Example of information system in the BIOS

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• How to get the legend of bubble label text in MapView when we type?

  I added pins on MapView. Each pin card have a place name. Only touch the spindle, one sees a bubble. In this bubble, place name is provided. We provide the following C++ code name:

  NewDrop geolocation * = new GeoLocation();

  newDrop-> setName ("India");

  I want this place name, when I click on the legend label.

  Can someone help?

  Thanks corine.

  I tried the method you suggested.

  But I got a simple solution for this case. I added the following code in C++:

  NewDrop geolocation * = new GeoLocation();

  QString pinId = 'India ';

  newDrop-> setId (pinId);

  And in QML, I used 'focusedId', for that the bubble tapped s ID. This works.

• Use the 2nd column for the label data

  This should be easy. Online help for the numbers shows an example under Add graphics > adjust figure brands and labels.  My table is a simple 2-d column chart. In a single column, I have the weight in pounds, and in the second column, I have a date. When I have only the weight column selected in the form of data, I get a graph that is almost perfect, but there is no date label. When I try to include date data, I have a reverse relationship X and Y. Once I selected a cell as reference data, it doesn't have any way to deselect. What I want to do is chart weight against date and have the date appear as a label.

  Any advice is welcome.

  Hi innerserenity,

  I swapped the order of the columns. Column A is a column header.

  

  Kind regards

  Ian.

• How to create the legend and graphic label using VBS

  Hello

  I scoured internet before that I resorted to my question here. I hope someone can answer my question.

  Using VBS, how can I create a legend of the channels used in the chart and the label of the axis in the chart? Thanks in advance!

  I managed to find a way to create labels...

  Call GraphObjOpen(D2AxisXObj(1))
          D2AxisXTxt = "@@ChnName(CurrChnNo)@@ [@@ChnDim(CurrChnNo)@@]" ' Defines the x-label
  Call GraphObjClose(D2AxisXObj(1))
  

  Now, to figure out how create the legend. If anyone can help me, it would be great.

  ... And now I feel like a fool outright.

  After scouring more, I managed to find what I need

  Call GraphObjOpen("2D-Axis1")
    '------------------- Swith legend on -------------------------------
    D2LEGDRAW        =1
  
    D2LEGTXTTYPE     ="Free text" ' "ChannelName" or other keywords
    D2LEGTXTFREE     ="My free legend"
  
  Call GraphObjClose("2D-Axis1")
  'redraw
  Call Picupdate()
  

• Problem to adapt to annotation label Y position Offset, help!

  Hello

  I use the histogram to draw several values and I want to use annotations to show the value of each bar.

  I climb the ladder to have space for the value of the annotation using the max value of data. But I can't adjust the offset of the label to have the same free space in all the bars. If you see the attached file, you can see the figures cover the bar and they do not look ok. You know sort of adapt to get all the annotations of values with free space even with the bar of?.

  Thank you for all.

  Fred.

  

  Of course, if some elements are constant (for example the number of bars) a lot of properties should be written only once before the loop. Here's the code in action by using the random data generated.

  

• Dimension figures of precision measurement

  Is there a way to reduce the number of digits of precision or number of digits? It's really annoying to have these really long labels like 16,500000 and 8,200000 mm mm. There could at least be a "hide zeros" and maybe a 'minimum number of figures' field as LabVIEW?

  Hi Ryan,

  There is no option to control the significant digits for the dimension, I would ask to R & D to focus on this issue.

• labels in multisim

  I draw in multisim 10.0 just for purpose of page layout, no simulation is necessary.

  Now, I want to work in parts / groups.

  I will include a picture that will explain what I want:

  

  Now, I used netlabels, but I want something like this:

  

  It's the RX / TX with bubble.

  I'm unable to quickly place a virtual pin, a PIN that will not appear in ultiboard to connect my pic with the header.

  Now maybe it's not the prettiest pattern because I have not generated a new example for you, but I can show you that I did. I have parts of schema only with custom symbols, then places the appropriate and manually renamed locations nets which connect them. You have just to hide the RefDes and change the label to your signal name. Remember that if you delete parts attached to the net, he can reset with a new net name and disconnect them. If you don't care what being connected to layout, then you don't have to worry about the nets.

• Avery Label Priting on HP Officejet Pro 8100 x - N811a/N811d

  I can't find "labels" under the paper types.  So, the printer think that the tray is empty.  It seems that the print label sheets should be a standard & easy task.  A what someone has had this problem & figured out how to fix it?  Thank you!

  Hi technonot,

  I understand that you have a problem with printing labels. I'll try my best to help you solve this problem. To help you, I need more information.  Could you please tell me what operating system are you running on your computer? What type of finish is on glossy or matte paper label? What is the size of the sheet?  That is to say. Letter

  Please let me know.

  Thank you

• Printing labels to an excel document.

  I have my address labels on an excel document Christmas card on my desk.  I also model for labels on my desk.  Now, I need the instructions step by step on how to 'merge' and print my Christmas Windows Vista help address labels.  Help!  I'm going crazy trying to figure out!

  Please see create and print labels for a list of addresses in Excel in Excel 2007 help and how-to .

  If you have any other questions about the process, I recommend display them in appropriate Microsoft Office forum .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• How to receive events touch of legend in mapview bubble?

  Hello developers,
  I have been woking on a map-based application. I want to see the PIN to some place on click and click a pin it there otherwise pop up on available in OS bb10 and can also add our user interface customized for the legend label. I saw an example of custom mapview http://blackberry.github.io/Cascades-Samples/custommapview.html in which they created a container separated and shown that the container during the click on pin.but that the container is not ' receive events.so touch how should I get the Touch touch events? pls help developer friends...

  Thank you

  I just tested and the onTouch Manager works perfectly.

  I added the following code in the main container of the bubble component to change the color of the label (you will need to add the > string in the Label component to test).

      onTouch: {
          label.textStyle.color = Color.Red;
      }
  

• BB10: Alignment QML issue labels

  Hi guys,.

  I have a little problem with QML labels.

  I have a stack of LeftToRight layout container. Inside, I put two labels: "title:" and "my text". See figure 1.

  

  In some cases, 'my text' might have a longer text ('my longer text' for example). When that happens, I want these labels to behave as in figure 2. I mean, it's 'my longer text' should come out of the screen on the right side.

  

  The problem is that they behave as in figure 3. It's like 'my longer text' gets centered horizontally and then she rides ""title:"."

  

  Any idea on how to solve this problem?

  Thank you!

  Hello
  Try adding
  layoutProperties: {StackLayoutProperties}
  spaceQuota: 1
  }

  the second label.

• Version number in the label (request for information)

  Hey guys, I can't figure out how to make it work.

  Here is my code:

  application. UI

  #include 
  
  ...
  ...
  ...
  ApplicationUI::ApplicationUI(bb::cascades::Application *app) :
          QObject(app)
  {
  ...
  ...
     //version info
     bb::ApplicationInfo appInfo;
     setProperty("versionNumber", appInfo.version());
  }
  

  about. QML (where I try TSE it output)

  ...
  Page {
  ...
      property string versionNumber: "0.0.0"
  ...
  Label {
              id: lblversion
              text: qsTr("Version %1").arg(versionNumber)
  }
  }
  

  That shows "0.0.0", but I want out of the real application version number.

  Help would be appreciated.

  Thank you

  Here's the solution to this:

  application.cpp:

  ...
  #include 
  ...
  
      bb::ApplicationInfo appInfo;
      QString versionNumber = appInfo.version();
      // Create scene document from main.qml asset, the parent is set
      // to ensure the document gets destroyed properly at shut down.
      QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
      QDeclarativePropertyMap* appProperties = new QDeclarativePropertyMap;
      appProperties->insert("name", QVariant(appInfo.title()));
      appProperties->insert("version", QVariant(appInfo.version()));
      appProperties->insert("description", QVariant(appInfo.description()));
      qml->setContextProperty("AppInfo", appProperties);
  

  QML:

  text: qsTr("Version: %1").arg(AppInfo.version)
  

  I would like to thank: knobtviker and anditsung