draw curves of spreadsheets multi

Similar Questions

• Basic assistance a series of drawing curves

  I want to draw a series of curves/waves by using a simple template. I am able to follow the curve of the first, even if I am unable to match the others. Can someone give me advice on what I'm doing wrong?

  

  Hey Stan! I recognize that the exercise in the notebooks of the IPC.

  Your first curve much coming in the second anchor, but he'll be back on this anchor point that is not quite right. I use the technique of the old school here (both are taught in the book), then try this:

  Draw the first curve that you did:

  • Press on and drag to the top anchor 1 point, release the mouse button
  • Press on and drag down the anchor 2, release the mouse button
  • Return to the point 2 anchor, press Alt/Opt and press on and drag upward on the 2nd anchor point, release the mouse button
  • Press on and drag down the anchor 3, release the mouse button
  • Return to the point 2 anchor, press Alt/Opt and press on and drag right right up on the 2nd anchor point, release the mouse button
  • Press on and drag down the anchor 4, release the mouse button
  • Return to point 4 of the anchor, press Alt/Opt and press on and drag upward on the 2nd anchor point, release the mouse button

  Look at it this way: you drag as you want the curve to go, so 1 anchor is in place and 2 anchor is down. But 2 turns on itself, that is why go back you to 2, press the Alt/Option key and drag upward.

  

• Draw curved line with color gradient

  How to draw the curved line (using the pencil tool) with color gradient (example: blue, yellow or white to gray)?

  Can not change the color of color gradient stroke?

  Here's a way to kind of work.

  

  Use the lag effect (CS3) and fill with a gradient.

  Note that the gradient is not actually 'follow' but where it is located (in this case) horizontally.

• Custom drawing curves, shapes, the shapes of S, etc.. ?

  How to draw symmetrical curves, custom shapes, shapes of S, etc.?

  I am a beginner and I have PSE 6. I can upgrade to version 8 or use plugins if necessary. I've been Googling this, but comes back to pen pencil? Where are the paths options?

  -> My question is I am wanting to create custom forms. For example, a half circle curve or shape of s. how can I do? I had rather not use the marquee selection tool. 

  An example of a curve I want to reproduce is attached.

  Thanks for any help.

  I have never tried this product, but you might look into elements. He claims to add several Photoshop features like being able to make a path from a selection and to convert a path to a vector shape.

  I don't see why it would be possible as there are has several series of actions that add features of Photoshop elements such as the mask of the base layer. I also found an action that converts a selection into a path so it can be drawn with a brush... looking for: Sunday, October 19, 2008 "Stroke with a brush for PS/PSE Actions!"... about halfway the to the bottom of the page. Not what you want to do a custom shape, but the evidence that selections can be converted into paths. (Actually, it's a really good action to have if you have items that you can trace different paths with brush tips instead of using Edit

  http://thescrappincop.blogspot.com/2008_10_01_archive.html

  You may still have to save the form to a file separate if you intend to use it more than once. You could probably build files of master with an assortment of different forms, each on its own layer... kind of work around the problem of not being able to save a form defined in a custom shape file.

  Link to the site elements:

  http://elementsplus.NET/

  With the oldest and cheapest Photoshop version. Make sure that there are many fake pirates best of Photoshop. You also meet assuring you that you are not purchasing a version upgrade instead of a full version.

• 2D, legend, chart error bar XY, Multi draw help? Please modify the VI

  Please READ THE ENTIRE POST and HELP!

  Please help with this VI and make an instructive example for me and other novices like me who come through this typical example.

  A typical problem of tracing data is the following: on the SAME plot (y axis = Amplitude axis x = time), draw curves Amp1, Amp2, Amp3,... from sample1, sample2, Sample3,...

  In addition, it is a mistake1, Error2, Error3,... associated with Amp1, Amp2, Amp3,..., which must also be traced. In order to distinguish between these curves, we can use different

  colors and show a legend that reads Amp1 (i.e. black), Amp2 (say red) and Amp3 (green for example). Then, the plot becomes complete and transmitting data very conveniently.

  The attached VI made an attempt to trace Amp1 and Amp2 helps chart XY and 2D plot of error bar (to display error bars). There is a slight problem. The legend does not show what it is assumed

  to show. Can someone solve this? If I draw two curves, the caption should show Amp1 Amp2, that if I drew three curves, the caption should show Amp1 Amp2, Amp3 and so on.

  I don't want to see the default plot 0, draw 1 or whatever. Also, it would be nice to dynamically control the symbol, the color, the style of curve etc as we continue adding more curves in the plot.

  Once this problem is solved, I know that I can easily extend to draw more accurate curves two dynamically. I could use for loops with shift registers, etc. to draw any number of curves on a single parcel.

  Believe me, I searched for other positions and could not find a simple example like the one I posted here. I found a lot of examples have confused me more that helped me.

  I believe that if this problem is solved in a simple way, many will find this informative example. So by helping me, you help a lot of other people as well!

  Thank you in advance. Please see the attached files (VI and an example of data file I created only)

  If you like graphic multiple curves (Y1, Y2, Y3, etc) with their respective error bars (Err1, Err2, Err3, etc.) on the same plot

  Use the error Bar Plot (aka 2D bar error) and want the legend to display (Curve1, Curve2 Curve3, etc. or all what you want to call it),.

  Please visit the following link:

  http://forums.NI.com/T5/LabVIEW/A-simple-challenge-error-bar-plot/TD-p/1986755

  For the use of XY graph, please check out the link in one of the posts above.

  Thanks to everyone who has contributed to this.

• How can I draw a curved line?

  Sorry for the inconvenience, but I tried the Photoshop information and could not succeed.

  What should I do to draw a curve?  I have no problem, draw a straight line, it's pretty easy, but I was not able to find a way draw curves and get the same results to draw a straight line.  I tried to work with the Pen tool and I could draw some curved paths, but as I said that a path is something abstract, I can't work with it as a stright line.  I m pretty sure that the answer is simple, but I was not able to understand.  Can someone help me please?

  Howdy.

  But, how can I caress a path?

  To create your path, click on the button "Create a new path", second from right at the bottom of the garbage can. Select the pen tool. Draw your way. Click on the small triangle at the top right (highlighted). Select the path of the path.

  

  Select an option for how you want to stroke the path. I chose the brush. Brush properties are applied to the way such as a stroke.

  

  That's all. It will be useful.

  Peace,

  Lee

  PS: Semaphoric: did not know the shortcut. Thanks for the tip.

• plot a point with curves

  With a unique problem of adding data point to group to draw curves.

  Suggestions?

  Are you trying to add a fourth field or add to an existing one? If you want a fouth field, you need to have the data in the new mathc cluster other clusters. This means make a table of each scalar. If you want to add this point to a parcel of exsiting and you must use the function Array to build on one of the x's berries - in the beam.

• Animate the curve path as3

  Flash has every easy to animate horizontally same snippet.

  But what about the curved path? I searched internet much for this but don't have any satisfactory not easy to animate along this curve. I need code. no motion tween

  can you suggest me a blog or an article for it?

  Note: I will draw curve using the tool brush so pls refer to no code to draw the curve, rather give me the code to the movieclip (ex: man) to run on the curve

  

  use:

  stage.addEventListener (KeyboardEvent.KEY_DOWN, keydownF);

  function keydownF(e:KeyboardEvent):void {}

  {if(e.keycode==whatever)}

  skateboarder. Play();

  }

  }

• How to draw an arc Flash pro cc, whereas the Center and the RADIUS as parameters?

  Please help to draw curves in flash pro cc, whereas the Center and the RADIUS as parameters...

  function drawArcF(sp:Sprite,centerX:int,centerY:int,radius:int,startA:int,endA:int,color:uint):voi {d}

  {if(startA>ENDA)}

  var tempA:int = startA;

  startA = endA

  endA = tempA;

  }

  var degToRad:Number = Math.PI/180;

  {with (SP. Graphics)}

  lineStyle(0,color);

  moveTo (centerX + radius * Math.cos (degToRad * startA), centerY + radius * Math.sin (degToRad * startA));

  for (var i: int = startA + 1; I<>

  lineTo (centerX + radius * Math.cos (degToRad * i), centerY + radius * Math.sin (degToRad * i));

  }

  }

  }

• XAXIS length

  Hello

  I use the script (2012) Tiara to draw curves.  I want to limit the x and the lengths of axis y.  I tried many possibilities using variables such as the D2AxisYEnd without success.  Below an excerpt where I used "D2AxisXEnd".  The script just ignores it and creates an axis much more long (= a default length?).  I'm obviously something wrong, but I don't know what.  Any help would be appreciated gratefully.

  Thank you

  Call GraphObjOpen (D2AxisXObj (1))
  D2AxisXTxt = 'speed '.
  D2AxisXEnd = 500
  Call GraphObjClose (D2AxisXObj (1))

  
  
  
  
  
  
  
  

  Hi Muskeg,

  Here, it's guessing that your D2AxisXScaleType property was still put auto-scaling.  Try these 4 set variable assignments:

      D2AxisXScaleType = "start/end of manual.
  
      D2AxisXBegin     = StartXvalue
  
      D2AxisXEnd       = StopXvalue
  
      D2AxisXOrigin    = StartXvalue

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• global variables for the XML plugin problem

  Hello world

  recently I started working on a dialog box SOUTH, where the user can load the *.xml files in DIAdem.So much my code for the button looks like this:

  ....

  Call the FileNameGet ('ALL', 'FileRead","*.xml")
  Call DataFileLoad (FileDlgName, "XML_Plugin", "Load")

  ....

  And I must say that it works very well! I am able to load all listed in the devices file. BUT when I tried a number of loading devices, I used a global variable, that I defined in the vbscript file that I load the SOUTH since, I've noticed that global variables, I've defined with GlobalDim are not defined in the vbs.:mansurprised of XML_Pluging:

  Then I started to experiment and so far without success, no matter where I define global variables, in my plugin *.xml all not defined! The native commands even and DIAdem functrions does not work. If I run the script in tiara, it shows no errors, but when I use the plugin to open a file, then it gives an error. For example, MsgBox is not allowed.

  I used the plugin example for *.xml, which was published on the Web site of NOR, and I made a few changes. But overall I have it has not corrupted and I kept the same structure:

  Void ReadStore (File)

  Dim XmlFile: xmlFile = File.Info.FullPath
  '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
  'open the file '.
  OpenXMLFile xmlFile

  End Sub

  Void OpenXMLFile (xmlFile)
  '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
  ' Open MS - Xml Parser
  'Create the ActiveX object for the Microsoft XML parser.
  Dim XDoc: set xDoc = CreateObject ("MSXML2. DOMDocument.3.0")

  "Try to load the XML document
  If xDoc.Load (xmlFile) = False Then
  "Failed to load the document XML.
  RaiseError ' unable to load XML document!
  End If

  protected originalLocale: originalLocale = Getlocalte
  "SetLocale" en - us ".

  "The XML document loaded successfully!
  '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

  '----------------------------------------------
  "Read the header information.
  '----------------------------------------------

  Here, I have read some values of the header and then I loop on all devices present in the file!

  So basically I have two subroutines and that's all.

  SetLocale originalLocale

  End Sub

  So what I am doing wrong? Why global variables and other functions do not work. Is it because there is xml code in the script this way or it's a version problem?

  I use DIAdem 10.2. If I use global variables in other vbscripts, I use to draw curves for example I have no problem. Now I'm no *.xml code and no subroutines.

  I'd appreciate any solution that will make my *.xml plugin to work.

  Hi fscommand.

  It is expected all behavior.  Use XML, as all VBScript DataPlugins, runs in a separate VBScript host of the DIAdem VBScript host.  DIAdem VBScript host adds all global variables green and Red controls global to host Microsoft VBScript standard.  Use VBScript host has its own special abilities (file object, root object), but there is NO access to Globals green or red blanket orders in the reception of DIAdem VBScript.  Your SUDialog runs in a third host VBScript, which is separated from the other two and the other two are not capabilities (command SUDialog callback functions), but the SUDialog VBScript host and VBScript tiara share all global variables green and Red orders overall.

  Normally all blue VBScript commands are allowed in all 3 VBScripts hosts, but in the case of the DataPlugins MsgBox and InputBox functions were especially restrained because the dialogues could cause a lot of trouble with the DataFinder.  In fact, they have been allowed to 9.1 tiara which was the latest version of tiara for the DataFinder appear.

  So, why do you want to pass information between the XML use and tiara?  If you want to use to share information with DIAdem, then you should just expose every piece of information as a new property in the data portal, which can read and use the code VBScript DIAdem.  The path of the XML file is already available inside the use of XML.  What other information in the call VBScript DIAdem do you need to share with the use?

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments

• error in dialog file 43 happens without apparent reason.

  I was running a program over and over again (dozens of times) with no problem and all of a sudden, I had an error 43 of file dialog box. When I get this error box pops up saying the following:

  "Error 1 has occurred to open/create/replace file spreadsheet write String.vi-> .vi write to the file (string) spreadsheet-> multi 20120816 track of Cycle IV with auto delay.vi.

  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.

  P:\r&D\Studies\Test Logs\log IV-S178-protoA5-2-H5.
  GB-ARD-1-dark - 201209071512.txt.

  Far as I can tell I have not changed the path of the file or put in characters which are not allowed. And whenever I run the program now I get this error.

  What should I do about it? I'm totally stumped.

  Thanks for your help,

  
  

• Polygon w radius of corners, aka 6 rectangle cornered to rays?

  Hi people,

  CS5/Win is the platform.

  I have a 'calendar' design that should have groups of days described (generally regarded as a "rectangle with rounded corners"), but because of the schedule sometimes days being 'stated' are on separate lines. Picture regular corners at the top on the left and the upper right corner, but the line 'left down' and 'bottom-right"are not the same. Usually the "lower left" is a lower than the 'in bottom right"line. Imagine the lower row, resembling a 'stairs' with a single step.

  The problem seems to be that when you draw a "rectangle" with more than 4 corners, some type of 'management of RADIUS' is underway, and a radius of gets changed (reduced) so that the rays do not conform to the object.

  Everyone knows this? No work around? FWIW, the distance available between the two corners (which is assigned) has a sufficient distance to create the RADIUS expected...

  Help, anyone?

  I am able to reproduce this, but it seems to happen only when you reach a certain threshold for the size of the sides of your shape. My suspicion is that is related to the corner live path effects are managed (you can't, for example, get a real pair of. 25 "corners of rays on one dimension 5" using the effects of rounding - ID just won't go beyond the max RADIUS, which will allow the small required flat between the corners), which differs from the corners of the way which have been addressed in previous versions. I think you need to adtually draw curves yourself with the pen, or go through a fairly complex series of operations of pathfinder to combine different rounded and square cornered rectangles:

  

  Cyan, magenta and yellow forms have been alldrawn with the tool rectangle, then selected together and a corner option applied. The pathfinder can combine forms Cyan, yellow and green, and then subtract the Magenta of the form combined in a second time. The colors are for example: you don't need fillings to work.

  For what it's worth, I think it sounds better visually if the inside of the corner has a smaller radius, but you can combine things as you want using this method.

• How to reduce agitation with a Tablet laptop?

  I just got a new tablet PC laptop, and I was wondering when I draw freehand, why he shake so much? I can't draw a straight line without going in all directions! Is there a setting that even out / reduce my agitation? I know that's not me! If not, is there by chance a tool or something that I could use to replace Freehand, such that a line tool curve?

  Shieldman_ wrote:

  I just got a new tablet PC laptop, and I was wondering when I draw freehand, why he shake so much? I can't draw a straight line without going in all directions!

  Most of the tools if you hold down the SHIFT key, and then click mouse to go to a second point and click, it will draw a line between the 2 points striaght. If your points are close together, you can draw curved lines, or follow the outline of the picture quite well.

• Try to draw a hyperbolic curve of line.

  I have numbers 09 version and am doing a hyperbolic curve line. I've set up 10 positive and negative points Thexaxis and when I go to draw on the X 10 positive point rather than return to 0, it starts with 11-20 (now there is negative). How DO you get the negative part of the curve where it should be?

  

  Hi Tom,

  Could you add the table providing data to the chart in your screenshot, please. Show it with the selected graph.

  Kind regards

  Barry