Lables

Similar Questions

• lable of the plot

  Hello

  I use hp4192A impedance Analyzer to run two measures: CV and see after taking data, CV or CF plot appears in the front panel. Is there a way to show different plots label according to how I run? by example, if I run as CV, the plot will show the lable as ' C (F) vs V (V)' and vice versa. "

  Thank you

  Joyce

  Like this.

  

• BlackBerry Q10 timer does not work for a project of 10 Q Lable in Blackberry

  Hi all

  I'm just a new Black Berry Q 10 and just beginner. I get some helpful solutions here to correct my mistakes. I am very grateful for this site and its members.

  In my application, I would like to add a timer to a lable. for every second, I want to Christophe Lable value. Here is my code Qml and timer.

  // Default empty project template
  import bb.cascades 1.0
  import CustomTimer 1.0
  // creates one page with a label
  Page {
      Container {
          id:root
          layout: DockLayout {}
          property int f: 10
          Label {
              id: timerLabel
              text: qsTr("Hello World")
              textStyle.base: SystemDefaults.TextStyles.BigText
              verticalAlignment: VerticalAlignment.Center
              horizontalAlignment: HorizontalAlignment.Center
  
          }
          Timer {
              id: lightTimer
              // Specify a timeout interval of 1 second
              interval: 1000
              onTimeout: {
                  root.f -= 1;
                  timerLabel.text = "Timer:"+root.f;
                  lightTimer.start();
                  if(root.f<0){
                      lightTimer.stop();
                  }
                  } // end of onTimeout signal handler
          } // end of Timer
  
      }
  }
  

  #include 
  #include "timer.hpp"
  
  Timer::Timer(QObject* parent)
       : bb::cascades::CustomControl(),
       _timer(new QTimer(this))
  {
      Q_UNUSED(parent);
      connect(_timer, SIGNAL(timeout()), this, SIGNAL(timeout()));
      setVisible(false);
  }
  
  bool Timer::isActive()
  {
      return _timer->isActive();
  }
  
  int Timer::interval()
  {
      return _timer->interval();
  }
  
  void Timer::setInterval(int m_sec)
  {
      // If the timer already has the specified interval, do nothing
      if (_timer->interval() == m_sec)
          return;
  
      // Otherwise, set the interval of the timer and emit the
      // intervalChanged() signal
      _timer->setInterval(m_sec);
      emit intervalChanged();
  }
  
  void Timer::start()
  {
      // If the timer has already been started, do nothing
      if (_timer->isActive())
          return;
  
      // Otherwise, start the timer and emit the activeChanged()
      // signal
      _timer->start();
      emit activeChanged();
  }
  
  void Timer::stop()
  {
      // If the timer has already been stopped, do nothing
      if (!_timer->isActive())
          return;
  
      // Otherwise, stop the timer and emit the activeChanged()
      // signal
      _timer->stop();
      emit activeChanged();
  }
  

  #ifndef TIMER_HPP_
  #define TIMER_HPP_
  
  #include 
  #include 
  
  class QTimer;
  
  class Timer : public bb::cascades::CustomControl
  {
      Q_OBJECT
  
      Q_PROPERTY(bool active READ isActive NOTIFY activeChanged)
      Q_PROPERTY(int interval READ interval WRITE setInterval
                 NOTIFY intervalChanged)
  
  public:
      explicit Timer(QObject* parent = 0);
  
      bool isActive();
      void setInterval(int m_sec);
      int interval();
  
  public
  
  slots:
      void start();
      void stop();
  
  signals:
      void timeout();
      void intervalChanged();
      void activeChanged();
  
  private:
      QTimer* _timer;
  };
  
  #endif /* TIMER_HPP_ */
  

  and I sign up time as follws custome...

  Registering the custome timer
  qmlRegisterType("CustomTimer", 1, 0, "Timer");
      // create scene document from main.qml asset
      // set parent to created document to ensure it exists for the whole application lifetime
      QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  

  where I'm wrong... I'm just Hello world but Timer shows no lable value. Please help me!

  Hello

  It was my mistake in looking at timer in Qml. The good way to start is given below.

  Already... .i was

    Timer {
              id: lightTimer
              // Specify a timeout interval of 1 second
              interval: 1000
              onTimeout: {
                  root.f -= 1;
                  timerLabel.text = "Timer:"+root.f;
                  lightTimer.start();
                  if(root.f<0){
                      lightTimer.stop();
                  }
                 } // end of onTimeout signal handler
          } // end of Timer
  

  but now to hide a bad start timer and start in the right way

  Timer {
              id: lightTimer
              // Specify a timeout interval of 1 second
              interval: 1000
              onTimeout: {
                  root.f -= 1;
                  timerLabel.text = "Timer:"+root.f;
  //                lightTimer.start();
  //                if(root.f<0){
  //                    lightTimer.stop();
  //                }
                 } // end of onTimeout signal handler
          } // end of Timer
  
      }
      onCreationCompleted: {
          lightTimer.start();
      }
  

  Thank you!!!

• Lable text being truncated...?

  Hey all.  Tmessing juice around more with the containers.  That I made a lot of progress on my application, but I hit a small snag.

  I have several containers, but here is the relivant code:

  // now we build the footer
              _footer = new Container();
              _footer.margins = Vector.([5,5,5,5]);
              _footer.flow = ContainerFlow.VERTICAL;
              _footer.debugColor = 0x0000FF;
              _footer.padding = 3;
              _footer.size = 7;
              _footer.sizeUnit = SizeUnit.PERCENT;
              _footer.flow = ContainerFlow.HORIZONTAL;
              _footer.align = ContainerAlign.FAR;
              _footer.containment = Containment.DOCK_BOTTOM;
  
              // create a Text Format for the Footer
              var FooterFormat:TextFormat = new TextFormat();
              //FooterFormat.size = 10;                                       // set the font size
  
              // create Label for footer text
              var footerText:Label;
              footerText = new Label();
              footerText.format = FooterFormat;
              footerText.text = "1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20";
  
              _footer.addChild(footerText);
  

  The lable should be 1-20 kinds right?  Yes, that's what I thought.

  However, here is a screenshot:

  

  Me has anyone any idea why this is happening?

  Hey dtater,

  QNX labels have a width to default label of 100 or more. so when you insert text, you can adjust the width it is accordingly, otherwise there will be truncation. a good rule is to add 5 pixels to the total width of the text in the label. We use the setSize() method or the width property to adjust the width:

             footerText = new Label();
              footerText.format = FooterFormat;
              footerText.text = "1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20";
              footerText.width = footerText.textWidth + 5;
  

  or (this will adjust the height and width)

             footerText = new Label();
              footerText.format = FooterFormat;
              footerText.text = "1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20";
              footerText.setSize(footerText.textWidth + 5, footerText.textHeight + 5);
  

  hope that things cleared up. Good luck!

• How to justify to the left quick lable names

  Hi gurus,

  How left justify the names prompt lable, currently we are done as below

  

  I want to see OR name in the must be cropped on the left.

  Please provide your suggessions on that.

  Thanks for your time

  Hello

  By adding this somewhere in your dashboard page (ideally before the first prompt).

  If you want to always on the left, and everywhere, in your pages, you can make the same change in the views.css of your custom style. (I said just to avoid the random messages suggesting changing the standard, CUSTOM, the official style provided with OBIEE should not be affected, unless you want to lose all your changes from time to time...)

• Is there no way to update the 'default' Lables on all slides, once I have changed in the preferences?

  Is there no way to update the 'default' Lables on all slides, once I have changed in the preferences?

  I really want to recreate slides from scratch once again.

  What file, export, text... captions? You have a Word document with two columns. Definition of the second column (much easier in Word) and import again. This is the normal workflow for translation. It is possible with XML instead of the word.

• How to get some SelectOnChoice lable

  I want to get the lable of the selected item in the SOC componebt

  What jdev was do you use?
  Check https://blogs.oracle.com/adf/entry/getting_selected_value_from_selectonechoice

  Timo

• Lable only member display data in ASO

  Hello
  
  I have marked the 'Measures' dimension on the outline as "Lable" only and also define the grouping property of all members of the measures dimension to "Ignore (~)' in an application of ASO. But when I retrieve the data in this cube in SmartView, I am able to see data at the level of the dimensions also, that is to say, to level 'Measures' and these data is the same as the data in the first member of the measures in the outline dimension. Please let me know how this can be corrected.
  
  Kind regards
  Krishna

  Hello Krishna,

  Please mark the dimension Measures "never action."

  Greetings
  OHS...

• Dynamically change the Lable column

  Hello
  I'm looking for some help in the report of the apex. I have a requirement where I want to show the name of the month as the column title. That change dynamically. below I have elabrated my requirement.
  
  Report of Novemeber
  Customer name Nov Oct Aug Jul Jun Sep
  99 99 99 99 99 99 XXXXXXXXXXXXX
  99 99 99 99 99 99 XXXXXXXXXXXXX
  
  
  December report
  Customer name Dec Nov Oct Aug Jul Sep
  99 99 99 99 99 99 XXXXXXXXXXXXX
  99 99 99 99 99 99 XXXXXXXXXXXXX
  
  
  I can dynamicallly change column lable shown above?
  
  Thanks in advance

  Set the field Type in the report attributes to PL/SQL and create a body of the function that generates and returns a string delimited by a colon that contains the required headers.

  See + {message identifier: = 10642248} + for an example.

• I can't find the forms in the paths of lable

  I've done several shapes with the pen tool, when I select once in a while I see each form in the paths of lable without problem, but when I select all forms nothing appear in the paths of lable. How can I export all roads at once? My draw is vectorized?

  Hello

  What version of photoshop are you using?

  Make layers of shape or path?

  You try to export all the paths using the file > export > traces to Illustrator?

• How to access the chassis lable on the main stage of a nested symbol

  All-

  I have two buttons

  btnA on the main stage

  btnB is nested inside btnA

  How to access a lable of frame on the main stage of btnB

  Hi, zontaluma-

  This should work:

  sym.getComposition () .getStage () .play ("label");

  -Elaine

• Hey Adobe, could I know how to configure the printer setting in Photoshop CS6 on the Lable print.

  Hey Adobe, could I know how to configure the printer setting in Photoshop CS6 on the Lable print.

  Hello

  Are you referring to the labels under brands of printing option when you open the print dialog window?

  If you check this option button, the name of the file you are editing will be printed on the top of the page, as shown below. You can change this label by changing the name of your file (go in file > save the to do)

  

  If you want to learn more about the print marks, take a look at this help document.

  If you try to print actual labels, you will need to use a pre-made template or create your own. Here is a template you can download free Adobe!

  If you have any other questions, feel free to post here again

  See you soon,.

  Kendall

• Lable color button

  Hello
  
  I have a button in the region to the title in the html area. I would change the lable of red color button. and increase the size of the button. Please help where to add and what to add

  style="color:red; height: 200px; width: 500px;"
  

  If this solves this as a brand problem please correct. Thank you!

• Space between textinput and lable of the present

  Hello
  
  In my page textinput is here, that my client needs a space between the lable to textinnput.
  
  Knockaert

  Hello

  803955 wrote:
  In my page textinput is here, that my client needs a space between the lable to textinnput.

  -do not lable for textinput element on your page.
  -create 2 other items

  style: StaticstyleText: prompt = textinput prompt
  style: spacer; width = 50 (you can adujust)

  -organize the elements in the order as below in your area

  
  
  

  Concerning
  Meher Irk

  Published by: Meher Irk on October 28, 2010 22:45

• Create lable with script

  I'm new to Flex and I want to create a form that has a number of XML entries. When the application is launched, it would create a label for each input XML and fill out the label with the name of the XML input.
  
  I work where I call on each regardless of the label with only a test of 4 input XML, but I would do it without manually place each label with a greater number.
  
  In pseudocode, I would do that in html by:
  for every XML element
  Create the new label (or text box)
  assign the lable with the content of the XML element
  the order of the day XML
  
  Is there an equivalent to that in Flex2?

  I think I found my answer. MX:Repeater is what I needed. Thanks anyway.