iMac camera dead

Similar Questions

• NAC Manager high availability peer CAM DEAD

  Hello

  I have two managers of the NAC with high availability and I used both interface eth1 of sides as a link Heartbit.

  I did following steps for high availability.

  (1) synchronize the time between two cams.

  (2) generate a temporary SSL certificate in CAMs and import-export procedure made in the other.

  (3) make a CAM as a primary and the other as secondary.

  But after all this made configuration I can see the State in surveillance > reports-primary CAM is in place in both servers and redundant CAM is down.

  Also on the failover tab, I can see - Local CAM - OK [Active] and counterpart CAM:-DEAD.

  I have attached some screenshots so that you can find the same.

  Your help will be very appreciated.

  Thank you

  Try these steps and check that all steps were followed:

  http://www.Cisco.com/c/en/us/support/docs/security/NAC-appliance-clean-access/99945-NAC-cam-HA.html

• Update camera dead afer Win 10 on Toshiba WT8-A-102

  10 Windows have improved. The internal camera on my Encore WT-10-A-102 is now dead. Everything else works OK, although some applications running a bit slow, especially the new edge browser (dumped for Firefox). By clicking on the camera Windows application now causes a blue screen with the message "Attempt run memory Noexecute". Then reboot the machine. Tried other Mac apps, same result. Obviously need new driver cam. Help please Tosh or my tablet doesn't help. Or any other suggestions?

  which device you have, the title of the topic, said WT8A, the message said WT-10A?

  I have improved my WT8A to win10, and the camera works fine

• iMac 24 "aluminum, Intel 2.4 GBh, 4 GB ram, how do revive, no OS installed currently

  
  

  New on Mac!

  Mine is an iMac 24 "aluminum mid-2007, GBh, 4 GB of ram 2.4 Intel processor.

  
  

  Problem is that this former owner deleted the operating system from the hard drive.

  
  

  Powered on, I can hear the DVD player, speakers put to the test with a sound, screen is grey with flashing apple logo.
  

  
  

  What should I bring?

  
  

  Thanks for the tips

  
  

  Michelserfor
  

  Initially, a 2007 iMac came with a Tiger 10.4 disk to reinstall the OS X and iLife Apps.

  If you can't get the original disc of the former owner, your best bet is to buy the Upgrade to 10.6 Apple retail.

  See > http://www.apple.com/shop/product/MC573Z/A/mac-os-x-106-snow-leopard

  Then update using the 10.6.8 Combo Update, so you can access the Apple App Store to purchase other applications and upgrades.

  See > Mac OS X 10.6.8 Combo Update v1.1

• Keychain error 100001 during the set up Time Machine to new iMac

  I received this error message: "error 100001 Keychain occurred during the creation of system Keychain for the username entry + all trying to set up Time Machine using my Airport Time Capsule for backups to a new iMac. Time Capsule airport working flawless since a few years back up both my laptop and my husbands laptop.  Scanning in the nets, I see that this is not an unknown problem, but I couldn't find any viable solution. I tried to edit the main chain. Suggestions?

  On a brand new iMac, it's kind of serious error. I could contact the Apple support and see if they know of the issue.

  I've never seen someone post in this topic... but as you say, this is certainly not unknown.

  Keychain error 100001 when you try to reconnect time machine.

  The iMac came with El Capitan or you upgrade settled according to Yosemite?

  Since the above post, I'd be inclined to reinstall the operating system.

  OR

  I must say that Time Machine becomes annoying... It is complicated and there are several issues where people often find that it doesn't work when they most need, IE recovery.

  I'd be inclined to install and use Carbon Copy clone or Chronosync. You can always make the backup of the TC, although to be honest, once again a 2.5 "self-powered drive plugged into the port USB3 can work much better with an iMac... occasional use of backup on the TC to ensure that you have a second backup.

• New HD I have no backup not getting microsoft Office that has been loaded when the iMac was bought

  I had to have my iMac HD erased my backup also disappeared. The iMac was purchased from Apple on 12/2015 with MS Office on this subject. How can I get Microsoft Office on the iMac?

  Your iMac came with a license code for Office, keep you?

• iMac mid 2011, gray screen of death!

  Hi all! (Sorry my spelling Im Danish)

  I have an iMac mid 2011, 2 TB HD, 16 GB of Ram and a video card AMD Radeon HD 6970 M 2 GB. My problem is the gray screen of death! After starting, I see the Apple logo and progress bar. When the progress bar stops, the screen goes gray and stops loading. I tried the following.

  1. Reset the PRAM og MSC
  2. Boot in single-user mode and fsck - fy
  3. Internet starts form Apple Hardware Test - no error at all!
  4. I tried starting in safe mode, I see the logo and progress bar, but it ends with the grey screen of death
  5. Tried to start with only the original RAM
  6. Tried to start without anny perihperal eqiptment (keyboard, mouse, ect.)
  7. Tried to start mode of recovery and a USB stick and an installation DVD, I see the logo and progress bar, but it ends with the grey screen of death
  8. Tried to do an internet restotre of Apple, I see the logo and progress bar, but it ends with the grey screen of death
  9. Began the iMac in target disk mode and got access to another iMac. A ran the disc utilities and first aid, always on the go!
  10. Started the iMac in target disk mode and made a full HARD disk cloth! Make new partitions tree and a clean install of the other iMac. And after that, the iMac problem still won't start!
  11. I can boot from HARD drive of the problem (in the mode of target diks) iMac via another iMac, so I guess the drive in the iMac problem is in working condition
  12. I also assume that the screen (video card) on the iMacis problem at work order due to the fact, that I see the Apple Start logo and progressbar. As well as the Apple Hardware Test run via the Internet (no video error)

  Anny surgestions what to do? My iMac is dead?

  The very best regards Dan

  Although this program has expired may want to investigate on the iMac (27-inch): AMD Radeon 6970 M video card replacement - Apple Support program

• IPhone 5 s calendar data

  I opened my calendar this am and ALL my data is gone. I didn't sync it and unfortunately I didn't save in LEFT. My iMac is dead, that's why I had not been back up my phone.

  I found a few online programs that say they can retrieve data from calendar - when I use them they have found that the events of 'holiday' and that's it.

  Incredibly * today!

  Anyone have any ideas?

  If you don't it were not synchronized with what anyone and it has not been saved, he went. Don't waste your time or money on pixie dust powder.

• Migration? or use iCloud Sync?

  After 3 years with Mountain Lion this iMac came with, I intend to upgrade to El Capitan. I prefer to do a clean install to simply upgrade to OS X. My iMac has become a bit lazy late, and I think he deserves to start a new life, don't you think?

  I did a test using a newly formatted laptop hard drive. Part of the installation of OS X, I used the Migration option (without migrating applications, which I intend to reinstall fees). Once I rebooted, it was such a pleasure to see my desktop look alike and to be able to use my Contacts, mail and Safari perfectly, as if I was still in ML. What a blessing!

  But I understand that designates the Migration ALL movement to my "new computer" which probably also means a lot of "junk" that has accumulated over the past 3 years, the cause that is probably in my slow iMac... A friend suggested that I better leave iClouds alone to update my sync settings.

  So I reformatted the laptop drive and did another test, this time the upgrade without the Migration option. Now, I have my Contacts, Safari has all my favorites, but my email software is bit messed up, does not show my old messages, but a lot of records, how my mail is saved to my library folder.

  Seems to me that using Migration would make the process much easier update, but is it possible to use it selectively, only migrate my email data, for example?

  Thank you!

  No migration assistant do not put on a lot of old junk from previous systems, just your own Junk (read users folder). Applications are updated and the old applications are replaced by new ones. This isn't what makes lazy. Unfortunately, run migration after the initial installation will result in your Mac create a new user account and this will present all kinds of headaches. If you plan to do, wipe the drive and start again.

  If you want to know what may be what actually slow download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information

• App refused? Why?

  Hello

  I submitted an application of time for the device developer BB10. It wasn't the app I was originally working (and which is to be published soon). I'm not proud of it, but it was not a bad (cr) app. The app, I tried out was impossible in the end, due to an error of the camera, a software update produced (http://supportforums.blackberry.com/t5/Adobe-AIR-Development/DevAlpha-A-Camera-dead/m-p/2090107/high... It's not my fault.

  Today, after more than a month, I checked the BB world for the approval status of the soft and what little I've seen: he refused. Without still when this happened and why it is very difficult to correct possible errors. It's a bit disappointing because I had to go on night shift to prepare this small app of time. Was it for nothing?

  What I am asking is: am I still eligible for the developer red device? A DevAlpha isn't bad and I'm still working with it, but it would be better to work and test the final device.

  How can I fix things without knowing what set?

  Thank you

  lrrm

  There is a link in the supplier portal, but here it goes:

  https://www.BlackBerry.com/profile/?EventID=8109

• Mac, a loss of power - locked VM

  I had a power outage and my iMac came down.  When I restarted and tried to open my VM, he says it has been locked.  When I tried to unlock the virtual machine, I got a message "this virtual machine seems to be currently in use".  When I clicked Take Ownership, I received a message that appropriators failed and "the virtual machine is in use by an application on your host computer.  How can I recover it?

  If you are sure that the virtual machine is not in use (it is probably not, since you restarted), leave Fusion (if you have not already done so). You can then go inside the .vmwarevm package (see information for VMware Fusion or HOWTO: ask (and answer) Questions) and delete the .lck files.

• 27 "mid 2011 iMac drive solid state drive is dead and must be replaced. Is this easier to do than to to replace a HDD with a SSD? I hope I can do it myself.

  My 27 "mid 2011 iMac drive solid state drive is dead and must be replaced. The SSD originally came with the computer and not a subsequent update. I understand that a SSD replacing a HARD drive is quite complex, but would be more simple replacement of a dead with a new SSD SSD? I hope I could make myself.

  Even as the replacement of a HARD drive. However, go to OWC buy the connector of the special drive that has the necessary temperature control that is not part of the SSD, because it is for the stock of HARD drive.

• Screen fades when I put a sticky on the front camera on my iMac

  When I put a paper on the camera on my iMac (to ensure privacy), it fades the screen brightness. How can I fix it?

  I am running Yosemite 10.10.5

  I want to cover the front camera on my iMac for confidentiality at all times.

  I put a sticky note pad on it and then my screen fades completely.

  How can I fix it?

  Thank you!

  MinSanDiego

  Not to do so.

• I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I have the effect on this model beach ball

  I spent hours on web sites looking for advice clean my iMac - they were all dead ends.  I send a question to this 'Community' first, but must have done it badly because there was no trace of it.  I now have the beach on this computer ball effect.  Are there places I can delete cookies etc to help out?  Thank you for your help.

  horse8905

  Don't know what's happening, you do not give a lot of information, but if you have the constant beachballing (spinning wait cursor), which could mean that the hard drive is dying.

  Open Console.app in Applications > utilities. Filter, called "String Matching," right, high enter "I/o" without the quotes. What happens when you do this?

• The iSight camera does not work on my iMac 21,5 "

  I have a mid-2010 - iMac 21.5 ", running 10.10.5 with 16 GB of memory.  All of a sudden my iSight camera doesn't work.  The led next to it is a steady green.  What can I do to get back up & running?

  I just ran a ' reporting system and it shows that he has not found a camera.

  Hey Ronald,.

  Have a webcam of work is very important, that I use mine often so I wouldn't be happy if mine did not work.

  Some things that you can try are:

  • Restart the computer
  • Reset the management system (SCM) controller on your Mac.
  • How to reset the NVRAM on your Mac.
  • Test in a new user ( OS X Mountain Lion: create a new user account )

  If none of these steps resolve the problem, the computer should be examined by a service provider.

  I'm not one of these steps will solve the problem.

  See you soon.