LabVIEW 2009 for labview 8.5

Similar Questions

• I purchased Adobe Premiere Pro CS4 in 2009 for Windows, but now I use an apple computer. Please can you lucky my serial number of the version of windows in a Mac version?

  I purchased Adobe Premiere Pro CS4 in 2009 for Windows, but now I use an apple computer. Please can you lucky my serial number of the version of windows in a Mac version?

  First of all, this isn't Adobe.  This is a user to user forum.  We are customers like you, with the exception of a few employees from Adobe that are similar to.

  Second, Adobe doesn't support a change of platform (operating system) for current software versions, although you can switch to another platform:

  Exchange a product for a different version of the language or platform

• VMWorld 2009 for the United States has been announced yet?

  VMWorld 2009 for the United States has been announced yet? If so, what is the location? Florida? New York?

  VMworld 2009

  VMworld 2009 will be held at the Moscone Center in San Francisco, CA September 1-4, 2009. Save the date for this event of the industry.

  From: http://www.vmworld.com/community/conferences/

• Can I build an application with Labview 2009 for Windows 7?

  Hello

  I use Labview 2009 SP1 and the application builder 2009 SP1. If I install the app on win7 this message:

  Engine run LabVIEW depends on failure to upgrade (...) version 9.0.301, language {} code that is not in the distribution.

  Is it a problem with Windows 7, having two records of installation of 32 bit (C:\Program Files (x 86)) and 64 bit (C:\Program Files)?

  I had an application built on a XP machine and installed on a Windows 7 computer that was looking for the files in C:\Program Files when they were actually installed in C:\Program Files (x 86) - because it was 32-bit application.  After the installation I had to move the files to 1 place to another to make it work.

• Driver NVidia GeForce Go 6150 for notebook to the HP Pavilion tx 2009 for Windows8 64 bit

  I tried searching everywhere but did not find the latest driver for NVidia GeForce GO 6150 driver for 64-bit Windows 8.

  HA... It creaks!

  Fear of that the foregoing is a bit premature... What follows seems really to solve if... Blackscreen questions gone... everything displays fine now...

  Find my win 7 x 64 worked perfectly, I redouble efforts to find the driver installed-NVIDIA GeForce Go 6150 - version 7.15.11.7967 - date 06/03/2009 and finally found in the Microsoft Update Catalog. http://catalog.update.Microsoft.com/v7/site/home.aspx

  Go to the home page catalog update Microsoft and enter 'NVIDIA GeForce Go 6150' in the search box.

  Select the larger of the two 7.15.11.7967 files and add to cart...

  nVidia- NVIDIA GeForce Go 6150 - display

  Windows 7

  Drivers (hardware)

  06/03/2009

  7.15.11.7967

  699.6 MB733621816

  Download the desktop

  Use 7zip to extract, move the folder where you want (in my case E:\NVIDIA\nVidia - Display - NVIDIA GeForce Go 6150)

  Type "Device Manager" in the Panel Office win8... go to graphics cards > right click and basic ms > update driver > choose from a list of drivers > have disk > select "nvqh.inf" in the folder that you created earlier.

  Follow the installation dialog and restart the computer (you can also follow steps of coprocessor above display)

  Work done... I can say!

  test windows 8 continues... .but it seems good enough to be worth a little persevereance

• 2009 for loop iteration zero bug

  This may have been posted before, but when a variable is directly wired by a loop (for example queue references) and the iteration of the loop is set to zero, or there are no items in a table indexed auto, the wire goes through straight translates a null or zero value.

  

  

  This is not a bug and that is the behavior of LV as far as I do not remember. To avoid this, use a shift instead of loop knots register - this will ensure that the data are passed through properly even when iteration count = 0.

• migrate the t610 more windows embedded 2009 for windows embedded 7 how? the license?

  my company bought some t610 customers more light hp but with WE2009 they want upgrade me the operating system to integrated W7.

  What they tell me, we use these thin clients to connect to the vmware with w7 session we don't need to pay 2 licenses. is this true? where can I get more information on licenses and for the TC

  and then how can I install the w7E on thin client using the new license?

  Thanks for the information

  As per above.

  The license for the operating system you have purchased is in the BIOS. The "image restore" process checks for a license WES7 and fail. ""

  Please contact your sales representative that you may be able to buy a license to WES7. In my view, that it is of dependent countries.

  You must also update Flash & memory of the device. WES7 currently use 16 GB Flash and 4 GB of Ram.

  Concerning

  Andrew S.

• How can I reinstall Windows Live messenger 2009 for Vista

  I installed Windows Live Essentials 2011 and I found myself with a lot of problems, I posted on Windows Live Solution Center. I want to go back to the previous edition, but can't find it on the Games Olympic Windows Microsoft sites. Whenever I search, Windows Live Essentials 2011 starts to turn up!

  Hello

  The question you have posted is related to Windows Live Messenger. Please post your questions in the Windows Live forums for a better response.

  Here is the link: http://windowslivehelp.com/product.aspx?productid=2

• r5 aurora Office 2009 for electric diagram.

  I bought a desktop computer aurora r5 which dosent have power supply hard drive or soundblaster audio card. like I said the lights should be hung. I don't know where to plug them something like im not a computer geek both in the game so I jumped if anyone could tell me where connect them all with photos would be a great help. Nobody here wants to put things in for me too because it lacks the soundblaster card what would be a good replacement. or dose one know where to get one. as well as I think he had two graphics cards, but it lacks a not sure. any help would be apertiated.

  You can find a diagram showing what needs to be connected where on the motherboard, beginning on page 17, in the Manual.

  This system has integrated HD video and can also handle ' up to two PCI-Express X 16, simple, full width/double-width length (maximum 10.5 inches) snap of video cards, according to the specifications.»

  As for what cards audio and video to consider, you might want to report these issues in the forum of Club of Alienware .

• print from quicken 2009 for deskjet hp 7130 all-in-one

  I can't print from quicken 2009 to my hp deskjet 7130 all in a 64 bit.  Can anyone help?

  Try this...

  = Step 1: determine which port the current uses of the HP product =.

  a. in the Windows taskbar, click the Windows icon/Start button.
  (b) in the search box, type control printers and press ENTER. The Printers window appears.
  c. find the HP product in the list of printers, click the HP product, and then click Properties.
  d. click the Ports tab and note the name of the port that has a check mark in the box beside it. This is the port at which the current HP product is printing.
  e. click Cancel to close the Properties dialog box.

  = Step 2: Add a default printer from the HP Deskjet 990c printer =.

  a. in the Printers window, click Add a printer.
  b. under Choose a local or network printer, click Add a local printer, and then click Next.
  c. click on use a port existing, click the arrow to the right to select the port identified in step 1, and then click Next.
  d. under manufacturer, find and click on HP.
  e. under printers, find and click on hp deskjet 990c, and then click Next.
  f. in the printer name box, change the printer name if desired.
  g. continue the wizard and select the preferred options and then click Finish.

• LabVIEW 2009 .exe works only with windows 2000

  I created a simple vi with Labview 2009 for resetting a counter in the registry key. I changed it to an exe. The program works well on any machine with XP, but it does not work on the machine, that I need on which is running Windows 2000 SP4. I have installed the runtime of 2009, but I keep getting an error when it starts the vi is not executable and I need the full development to correct errors. But like I said it works everywhere else. I tried other exe wrote in LV2009 on this machine and they work. Is there something in my vi which is not compatible with Windows 2000?

  Thank you

  dkfire wrote:

  If you build an exe on a XP machine, then it will work only on XP.

  You need generate the exe on a Windows 2000 machine to make it work.

  Simply not true - even close to not being not right.

  Chris,

  My guess is that the .NET component is not present on the pc of w2k.

• NOR-Fieldpoint supported in Windows 7 and LabView 8.6

  We have a 'classic' with an ethernet controller FieldPoint system. We want to be able to read/write from/to the FieldPoint network using a computer with LabView 8.6 and Windows 7. NOR-FieldPoint is supported in LabView 8.6 and Windows 7?

  Kind regards

  Nate

  Hi natewkidd,

  I feel like some confusion between the operating systems running on a development computer (as Windows 7) and real-time operating systems that run on our real time (such as the PS-2000) controllers. I will do my best to clear up this confusion first answering your questions.

  (1) what is the difference between 2009 LabView real-time and LabView 2009?

  LabVIEW Real-time 2009 is actually a software officially known as 2009 LabVIEW Real-time which is installed after the LabVIEW 2009 development software to allow the user to develop and deploy applications in real time on targets in real time as your PS-2000. You can consider the LabVIEW Real-time 2009 almost as a plug-in for LabVIEW 2009 deployment and development of real-time applications.

  (2) if I have a PS-2000 on the ethernet network and to use a computer that is running Windows 7 and LabView 2009 for record and display data, will I still be able to communicate with the network FieldPoint screws write FieldPoint to my Windows 7 computer?

  If you go just to use the PS-2000 as a network module (NOT to deploy a real-time application to run on the PS 2000 itself), you should be able to communicate with him using just the read/write FieldPoint screw on your Windows 7 with LabVIEW 2009 machine and the driver NOR-FieldPoint 6.0.5. In this case, you actually do not need the Module Time since you do not deploy the application to the target in real time.

  About the PS-2000 unsupported beyond LabVIEW 8.5.1, is because the controller's memory is not large enough to hold the software that is installed on the controller with LabVIEW 8.6.x Module real-time and LabVIEW Real-time Module 2009. For more information on this, you can check this knowledge base article.

  I hope it's useful! Let me know if you have any other questions.

  Thanks for choosing National instruments.

  Aaron Peña

  National Instruments

  Technical sales engineer

  http://www.NI.com/support

• Thread mode in LabVIEW 2010 bug?

  I had an application written in LabVIEW 2009 for a PSC-2220 who stopped working when it was converted in LabVIEW 2010, and I tracked down the problem to one thing: the software sets the mode of the Serial wire. Call this method simply disables all of the program. It works when you run from LabVIEW... but if you build an application to start it will not start. Remove the call to thread mode - and voila, the application runs as it should.

  -I can solve the problem easily by calling does not fashion wire method, but this isn't a solution due to the fact that I need to use the RS-422/485 port RS485 2-wire mode.

  I found a solution that I can live with... it does not explain what is wrong, but here's what I had to do to be able to run the init.vi serial port from outside vi.lib\Instr\ - which in turn allowed me to add the changes I need (set the thread mode) without having to edit a library function :

  I had to flatten, i.e.replace all of its report with their content... I could have tried the inline function, but did manually to be sure.

  This may indicate that something is wrong with the binding when the program is compiled with RT... but it happens without producing errors of conflict or anything either. A startup.exe is produced - but is not able to run.

• How to get a file created by windows labview to work on a mac

  I try to open a data acquisition simple vi which was written in Labview 2009 for Windows, using the USB 6211 material. I installed Labview 2010 for Mac OS X (full) with NIDAQMX-Basic for Mac. The problem is that none of the sub - vi DAQMX opens correctly. I think it's because they have different names, for example in windows labview "DAQmx create Channel ' becomes 'DAQMXbase create a channel' or something like that. What is the problem? Installed the wrong DAQMX for Mac OS X?

  Hello oilyfingers,

  As other users have posted, DAQmx Base and DAQmx are two different drivers.  It is recommended that Windows users install DAQmx on their PC.  However, a version of DAQmx Base also exists for the Windows environment.  Your VI is expected to require fewer changes after installing this driver.

  NEITHER DAQmx Base 3.4: http://joule.ni.com/nidu/cds/view/p/id/2126/lang/en

  If you do not want to install DAQmx Base on Windows PC, it is a conversion utility that should help to automate the conversion of your VI of DAQmx Base DAQmx code.  This can be found in the link below:

  Conversion utility: http://joule.ni.com/nidu/cds/view/p/id/446/lang/en

  Smercurio_fc suggested, submit your interest for and day DAQmx version of Mac OS X in the exchange of ideas.  User in LabVIEW 2010, more than 10 different proposals implemented in the exchange of ideas.

  Kind regards

• MacBook Pro 13 "mid-2009 - hard disk of cloth before selling it for parts

  I'm selling my MacBook Pro 13 "mid-2009 for parts.  The motherboard crashed.  The laptop is no longer active.  I have all the data of the hard disk (made for me by the repair store), but I still need to remove the hard drive and erase all that it contains.  I can understand how to remove it, but the advice to clean the hard drive would be very appreciated.  Thank you!

  Here are some steps provided by Apple: disk utility (El Capitan): delete a volume