LabVIEW base, protocols supported system of development and the basic features

Similar Questions

• My Macbook Air uses El Capitan 10.11.5. This operating system repeatedly freezes and the computer must be turned on / repeatedly.  How to solve this problem?

  My Macbook Air uses El Capitan 10.11.5. This operating system repeatedly freezes and the computer must be turned on / repeatedly.  How to solve this problem?

  Hello

  Check if the hard disk needs repair.

  Open the disk utility, located app in HD > Applications > utilities

  Select Macintosh HD on the left then click the first aid tab, and then click Run.

• error 800024002 when you try to put up-to-date. system will not accept download powershell. get 0 x 4002 error and the basic error "problem occurred and will leave the download.

  Have HP Pavilion a6110n and windows Vista editions Home premium.  A reboot from recovery disc and Noah update will not work. System has also disabled the netgear router and killed a comcast modem. I think I need computer trash HP 6110.

  Hello

  Repair windows files, to do this, perform an inplace upgrade which would help.
  http://support.Microsoft.com/kb/2255099

• I looked under system restore points and the earlier it had was on March 27, which was still after that I got problems

  Good so my computer has some corrupted files... I looked under the system (Yes, including the section 5 days ago) restore points, and the earlier it had was on March 27, which was still after that I got problems... I want a later date... Help, please.

  Hello

  If there is no previous restore points until 27 March, including even more that 5 days more then they just do not exist

  and you can not do something which

  Follow these steps instead:

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Error message: "The operating system not found" and the computer laptop (Windows 8) starts do not.

  Original title: computer laptop (Windows 8) starts do not

  Laptop: Sony Vaio

  Processor: core i3 with 4 GB of memory
  Operating system: Windows 8
  Before going to sleep, I was using my laptop & it did not work properly. then I download something, so I put on and fell asleep. When I woke up I found a message on the screen, operating system not found. I restarted. Now it starts and appearance of the new as usual Windows logo, but it does not move, I mean points keeps moving in a circle with the Windows Logo, but nothing happens.
  I tried in the BIOS and it detects the hard drive, it means that hard drive still works.
  How to solve this problem?

  Hi Sunil,

  Thanks for the reply.

  I suggest you to contact the manufacturer for activation. If you still have problems you can contact the customer support team, you can see the steps in the link below.

  Get help from Microsoft Windows activation

   

  https://support.Microsoft.com/kb/950929?WA=wsignin1.0

  Let us know if you need assistance.

• I want to detect if my PC supports: Client Hyper-V and the second level address translation (SLAT)

  I want to detect if my PC supports

  Level address translation Hyper-V and the second customer (SLATS)

  and activated it. Hyber VT - X

  How?

  my PC is

  HP Pavilion Elite m9372.gr Desktop PC 2008-2009

  Series number:

  PART_NUMBER: FZ110AA-B1A

  the processor is Intel core 2 Quad

  You are right, that the CPU will not support it little matters not matter what OS you are using.

• WSCAPI system file missing and the Security Center will be not turn on.

  -Micorsoft Fix It Center report WSCAPI system file does not exist.  In addition, Windows security system is off and will not turn on.  Are these related issues?  What can be done to solve these problems?  Fix - It Center could not fix and offered no solution.

  Hello

  As Windows was preinstalled on your computer, you must contact the Original equipment manufacturer (OEM) to reinstall of Vista drive. I suggest to fix vista problems, before you start the upgrade to Windows 7 if it is not upgrade may freeze or you will receive errors.

  After reinstall of Vista drive, you can perform SFC scan offline using the disc. Follow the steps below to do so.

  a. Insert the installation disc.

  b. restart your computer.

  c. click on the Start button, click the arrow next to the button lock and then click on restart.

  d. If you are prompted, press any key to start Windows from the installation disc.

  Note:

  If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  e. Select your language settings and then click Next.

  f. click on repair your computer.

  g. Select the operating system you want to repair, and then click Next.

  h. in the System Recovery Options menu, select command prompt

  i. type ' sfc/scannow' and check.

  You can also do the Startup Repair after receiving drive, the detailed procedure is suggested below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  I hope this helps!

• Premiere Pro is slow to develop and the freezing

  I'm back in a lot of frustration. I am currently working and the first is trolling and freezing. What I mean with this is the reading in the project monitor is trolling and every time more frequently my program freezes so that he is not receiving any input from keyboard (like the bar space or even most and less) or mouse. I wait some time, 0 to 60 seconds and it responds again. I am running Win 7; I-3 Intel Core 2100, i.e. 3.10 GHz 3.1 GHz; 8 GB of ram and Nvidia GeForce 210. I had the problem of delay from the beginning, but the gel is only just beginning. I installed the latest driver for the graphics card a month previously, manually, not by windows update, due to a previous problem. (Re: first crashes as soon as I open a project.) CS6 and CC both) tried to close all processes including Windows Explorer. Leaving only task manager, Avast and running first. He always does this. It doesn't seem to be my hardware either. I have this problem, if I use 100% of my CPU when I have several adobe running programs and I also when the first one runs with not all CPU or Ram being used. The video card never even started working, not even late. I am again out of options. Oh and by the way, I work with three cameras on the multicam monitor.

  If you work with blocking sequences, looks that you touch the issue discussed here: quick read (multicam) will not stop until end of timeline

• Error handling and the basic flow data

  Hello

  I'm learning the basic error data and flow management. The seal is a simple VI to implement this.

  How do I implement this code to display an error.

  Thank you.

  You must assign a value of your choice for the cluster of error - in errors generated by the LabVIEW functions, error is already assigned/etc, but to find user customized errors, the user must assign values.  Just make sure you do not use the same error values that LabVIEW uses for predefined errors. If you do a search for error codes, you will be able to find this error varies from code - so pick something that is not already used.

  And Yes - using an error handler would be a simple way to accomplish what you're trying to do. This error handler will appear a message error only if your feature will remain smooth.

  -DP

  BatchTest Corp.

  NEITHER Alliance Partner

• Why windows transparent like glass and the corners feature borders rounded abducted?

  I love the borders of beautiful windows, I had in Windows Vista and Windows 7! Why are they passes?

  In fact, I think that the layout in Vista is prefect but in 7 is always nice. However, I cannot accept the edges of solid windows and rectangular corners in Windows 8! >/\

  I know there is a method to make windows completely transparent borders, but what I want is sth. I had in Windows Vista or Windows 7!

  Can someone please give me a good reason why the nice feature is gone or can the development team please add it back?

  Thank you.

  He used the resources for little other return he seemed well.

  The new look means a clean, clear image, in line with the new tile interface and is generally less intensive than Aero. It gives laptops and desktops with built-in video a better chance of getting the stuff to the user upwards on the screen...

• Cache system against programs and the size of paging

  Start > right click desktop > properties > Advanced tab > settings button under performance > advanced tab > when memory use, must he be on programs or System Cache?

  In addition, on this same tab, under virtual memory > parameters, it says 1136 MB. If I'm going to change, it shows 29082 MB of available space, and it is checked system size managed. Underneath, it is saidTotal Paging size for all readers, Minimum allowed 2 MB, recommended 1135 MB, currently attributed MB 1136

  It is also a good configuration for best performance? I worry, because I always try to improve the performance of my Tablet and maybe I made these settings at some point and should not have done something. OK, I'm a Fiddler and sometimes I worry I can have fiddled too and I'm always looking to improve the performance of my tablet.

  I know that earlier I tried to change the setting on this first point which I spoke more to theSystem's Cache and my Tablet seemed to hate it. Suddenly, my IE was wrong, that I noticed immediately when I tried to come to this site. He was slow and poster of the wrong things and my connection is very slow. So I put this setting back to the program.

  http://support.Microsoft.com/kb/308417 hope this helps, Gerry Cornell

• Information from LabVIEW to TestStand using a notifier TestStand and the SetEx method

  Hi all

  I'm trying to use the parameter dataPropObj of the SetEx method to send information of LabVIEW TestStand during setting of the notifier. The works of declarant perfectly by itself when I wire variant empty constant by default entry dataPropObj of the INotification invoke method node, but all that is wired in causes some kind of problem. I tried wiring a string (which, according to the description of SetEx, should work), as well as a string converted to a Variant. If the string is empty, no work. TestStand hangs at step waiting for this notification. Again, the notification works very well when I wire only a constant varying vacuum at the dataPropObj of entry.

  All this is to work as part of a larger VI, but I extracted just this feature on its own sequence and vi, so there should not be other interfering factors I can think. If it makes a difference, the VI is called asynchonourly during the cleanup of the MainSequence group. I have to do this by calling a sous-suite as a new thread.

  Any help is appreciated.

  Thank you

  You must use Engine.NewPropertyObject () to create the variable you pass to the dataPropObj parameter. For example, if you want to pass a string, you must do the equivalent of:

  PropertyObject myPropObj = Engine.NewPropertyObject (PropValType_String, false, "", 0);

  myPropObj.SetValString ("", 0, MyStringValue);

  Hope this helps,

  -Doug

• Lightroom strange error then to develop and the lack of catalog

  Hello

  I just almost had a heart attack. I was editing photos and jumps between devleop and Slideshow module... when running a slide show, a beige screen appeared instead of the photo so I pressed "ESC" to exit the slideshow full screen and photos have started to get the exclamation sign and possibly the photographs showed no... I right click on the folder where pictures are stored and click on synchronize folder... After that all development settings have been removed and there is no pictures in the current catalog... I went to the file - open recent - Untitled.lrcat... He opened all the photos but without adjustments and collections... The last backup I have is 4 months... is possible to restore the catalog to an earlier version of the backup of 4 month?

  So on the next day after the answer above, I thought a possible that might arise the problem you encountered.

  If the disk containing the photos suddenly and unexpectedly been physically disconnected while you work (because something hit the connecting cable, or the cable is not correctly connected, or perhaps a failing drive), this could cause what you saw. It does not really help resolve the problem, however, I don't think there is a fix at this stage.

• Lightroom CC comes with the library showing;  I click on an image and click on develop and the software stops working.  Basically, I can't use Lightroom.  I can transfer images to Photoshop however.

  As above, LightroomCC simply won't go to the develop module.  I'm doing something wrong?  Never had this problem before now.

  Hello

  Please go to the preference of Lightroom, then go to the performance tab, uncheck 'use graphics processor '.

  Restart Lightroom, you should be able to work in the develop Module.

  Please let us know if it helps.

  Kind regards

  Tanuj

• Problem with the classes and the basics of object oriented programming.

  I got a main class called 'controll class:

  I'm addChild a btn on stage and create a listener to click the btn.

  When you click on the function of animation the curretn clip on the stage and moves out and addChild an another movieclip

  Levels_BG called

  Levels_BG contains fixed and controlled but his class onwl: Levels_BG

  That creates a certain number of 'boxes' on the scene that can be clicked to select a level.

  I'm tryin to achieve this goal:

  Click on a level area in the Levels_BG and I need to pass this variable to another class.

  Any help appriciated. SRY if this is confussing.

  Pavel has soon

  SWF here:

  http://www.2shared.com/document/pO8IIf4x/NumberGame.html

  Able to operate found this great guide:

  http://StackOverflow.com/questions/11083843/AS3-call-function-from-one-class-to-another

  I changed my function in control_Class:

  public static function startlevel (): void

  {

  trace ("from this class to it")

  }

  control_Class.startlevel ();

  thx for the help.

  Pav