LabVIEW Modbus TCP with VFD. Could not establish connection / error 56? Any thoughts?

Similar Questions

• FTP error could not establish connection

  Hello

  I am trying to connect to the ftp server to get a file of.

  I used the 'FTP get file.vi.

  here a screenshot showing the front and the block diagram:

  

  on the left, there are filezilla showing that the ftp server is very well connected and the remote path showing the files that I want to get one of them "log.txt".

  I filled out the same info in my labview vi... and when I type throws this error pops up

  {

  Error 0 occurred at the FTPOpen data connection: could not establish connection

  Possible reasons:

  LabVIEW: Error connecting to the GPIB driver or device.
  =========================
  VISA: (Hex 0x0) operation completed successfully.

  }

  I don't know what wrong I do... any ideas?

  Thank you!

  Thanks for your reply... I solved the problem ago... tour of false active to passive using the data connection in an active terminal...

  another error pops up that I have to put the same file type as the file that I ask for... I did the g:\file.txt local path and it workd very well...

  Thank you

• Cloud of Console 12.1.0.4 - IO error: the network adapter could not establish connection to access Instances of the ASM

  Hello

  Using the last version of the Console 12.1.0.4 cloud. I discovered a RAC cluster consisting of two nodes.

  And if I "try access the Cloud Console ASM instances will fail with this error:"

  IO error: the network adapter could not establish the connection

  The connection descriptor has been

  (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = tcp)(HOST=rac1-vip.localdomain)

  (PORT = 1522))) ((CONNECT_DATA = (SERVICE_NAME = + ASM1) (INSTANCE_NAME = + ASM1 (SERVER = DEDICATED))(UR=A)))

  My env is:

  Console of clouds on: release of Red Hat Enterprise Linux Server 6.6 (Santiago)

  Database Rac: Red Hat Enterprise Linux Server release 6.5 (Santiago)

  Someone knows how to solve this problem?

  Thank you very much!

  Arturo

  (1) what is the user id you are using OEM fior?

  The user id should have Sysdba and should not be in the role SYSASM.

  (2) in order to check your port

  In server, in the gate of the House, listener, lsnrctl status--> Verify asm instance listed on your listening port.

  Summary of endpoints listening...

  (Check that the PORT and IP information is correct)

  Instance '+ ASM1' READY State, has 1 operation for this service...

  (3) in addition, connect to asm and check the connection

  Show u local_listener and entered into OEM parameter details are correct.

  (4) OEM, I think you add Cluster_ASM.

  Oracle_home_path--> you're grid House

  username--> with sysdbarole

  --> Sysdba role

  Cluster_name--> $GRID_HOME/bin/cemutlo - n

  Service name--> + ASM

  ADD

  NAME: INSTANCENAME

  -Home: HOST1

  listener_HOST-->< show="" parameter="" local_listener=""> exit

  PORT-->

  SID- + ASM1

  Concerning

  Krishnan

• Log Monitor could not establish connection

  Hi all

  I'm fairly new to FGL and might not be aware, but I have the problem with the file Log Monitor of the cartridge of the Infrastructure.

  I get these types of exceptions and which means of course no data is collected.

  2014 09-24 11:42:13.024 ECHO [Quartz [0] - 5] WARN com.dell.foglight.infrastructure.actions.logmonitor.file.FileLogScanAction - could not execute commands of data collection for the logfile analysis Action [Host =>, HostType = WINDOWS, directory = c:\Quest_Software\Foglight\logs,?] [Filename=ManagementServer_.+\.log (! \.gz)]. She is skipped in this fundraising period.
  com.quest.glue.api.services.RemoteConnectionException: a shell connection could not be established
  to com.quest.glue.core.services.windowscommandshell.WindowsCommandShellServiceImpl.establish(WindowsCommandShellServiceImpl.java:140)...

  I was not able to find a lot of documentation (utility Infrastructure guide) on how the real backlog followed, but it seems to me like she is using WMI or WinRM (Windows hosts) - according to this doc.

  The host has already helped WinRM:
  PS C:\Users\adm_60036967 > winrm quickconfig
  WinRM is already configured to receive requests on this machine.
  WinRM is already configured for the management on this computer.

  But it is still impossible to connect to the host.

  Has anyone seen this problem before?

  How to solve it?

  Thank you

  Just checking if you have powershell, accurate documentation the obligation for the Configuration Windows File Transfer on remote hosts

  Also, look for alerts of credentials, please make sure that you release the credentials of the fglam you do the follow-up of.

  If it still does not work, I recommend you this opening with support as soon as possible

  Golan

• Could not establish connection to the server

  We have a user on a 64-bit Windows 7 device that is running the version of vWorkspace 7.6.0.791.  All the others have been the connection found in the environment with Web access, but this one users gets the generic error "Could not connect to Server" nothing no appears in the event viewer on the client device or server and did not know if anyone has seen this before.  Thank you

  Is this PC has the RDP 8 installed update (KB2592687)? If so, you will need to make sure you have the patch applied 8 RDP. See this link for more information:

  https://support.quest.com/SolutionDetail.aspx?ID=SOL101291

• Satellite Pro L300: Could not establish connection using WPA / WPA2-PSK

  Hello

  I have a Netgear FVG318 router with the new firmware and problems to connect using WPA-/ WPA2-PSK with Realtek RTL8187B integrated.

  With the help of WEP that works. I did a complete restore of Vista and installed SP1 + all Windows updates. No change...

  Then I tried using a Netgear USB WLAN Stick WPN111--> the same result, works only WEP.
  I rechecked the shared key before!
  After that I tried with a HP laptop, wonder... everything works! WEP, WPA / WPA2-PSK works! What do you mean?
  I think that there is a software problem in Toshiba-Vista version.

  Do you have any idea? The support has not helped me.

  Hello

  What you need to do is first of all update the WLan driver and if possible, you should check if the latest BIOS is installed too.
  I had similar problem on my A210 and all first I've updated the BIOS, then driver WLan.

  This helped to establish the WiFi connection.

  Check it out!

• Store Windows 8 will not be open. Could not establish connection due to server problem or connection has expired

  I had upgraded to windows 8.1 two weeks ago and had problems I did a system restore. Went through the update and now the store windows will not open so I can upgrade to 8.1 windows again. Any help would be appreciated.

  Hi Pinaki,

  Hooray!

  I couldn't understand how to disable McAfee so I uninstalled and installed AVG, now I install 8.1.

  Hope everything goes well.

  Thank you once again.

  Frank

• Essbase Studio Error (1021001): could not establish a connection with SQL data

  Hello.
  
  I try to deploy a cube Essbase Studio but I get the error: "* Error (1021001): could not establish connection to the SQL database server."
  
  My environment is Linux 5, Oracle 11 g and EMP 11.1.1.2. Database Oracle and Essbase has been installed with different users. The .bash_profile to hypadmin user (i.e. install Essbase) I put the following variables
  
  ORACLE_BASE=/U01/app/OracleDB/product/11.1.0
  ORACLE_HOME = $ORACLE_BASE/db_1
  LD_LIBRARY_PATH = / usr/X11R6/lib: $ORACLE_HOME/lib: $LD_LIBRARY_PATH
  ORACLE_HOSTNAME = DevBi.sigfe2
  PATH = $ORACLE_HOME/bin: $ORACLE_HOME/jdk/bin: $ORACLE_HOME/bin: / sbin: $ORACLE_HOME/opmn/bin: $PATH
  ORACLE_SID = orcl
  JAVA_HOME=/U01/app/InstallFiles/JDK1.5.0_19
  
  
  In my pc (windows xp), I can open the Essbase Studio console, the connection to the Oracle server, get the tables and create a minischema of measures and hierarchies (I can see the preview of hierarchies). I also can create cubes with EAS and can connect with MAXSHELL to essbase.
  
  When I try to deploy the cube of Essbaes Studio there get the error ' Error (1021001): failed to establish connection to SQL Database Server.
  
  The Essbase Studio log file says:
  
  + 12: 40:16 24/07/09 (admin-1) NEWS beginning hierarchical creation in the database "5.4.0.41:1423.POC_ESS. POC_ESS1 '... +»
  + 12: 40:16 24/07/09 (admin-1) FINA signed on Essbase by CSS token "5.4.0.41:1423" successfully... +.
  + 12: 40:16 24/07/09 (admin-1) building INFO Start dimension 'DM_CIUDADES'... +.
  + 12: 40:16 24/07/09 (admin-1) MAS FINA start creating rule file... +.
  + 12: 40:16 24/07/09 (admin-1) INFO SQL statement was created and implemented rule /home/hypadmin/hyperion/products/Essbase/EssbaseStudio/Server/./ess_japihome/data/DM_CIU.rul"+ file «»
  + 12: 40:16 24/07/09 INFO (admin-1) the query is "SELECT (CONCAT ("reg_", CAST (cp_105." ((ID_REGIONPADRE' AS VARCHAR2 (1000))) as 'REGION_PADRE', (CONCAT ("reg_", CAST (cp_105. (("' Be ' AS VARCHAR2 (1000))) as 'REGION_HIJO', cp_105. "' DE_REGION ' as 'REGION_HIJO. Defaults to"GO"POC ". "" Cp_105 ORDER BY DM_REGIONES_ESS3 cp_105. "" CSA DE_NIVEL ', cp_105. "" CSA ID_REGIONPADRE ', cp_105. "' BE ' ASC ' + '.
  + 12: INFO file 40:16 24/07/09 (admin-1) rule has been created and saved as "/home/hypadmin/hyperion/products/Essbase/EssbaseStudio/Server/./ess_japihome/data/DM_CIU.rul"+ ".
  + 12: 40:16 24/07/09 (admin-1) FINA Essbase starts to add members to DM_CIUDADES dimensioin based on the rules file. +
  + 12: 40:16 24/07/09 (admin-1) ADVERTENCIA (1021001): error al set conexion con el servidor SQL databases. Check out el registro for more information. +
  + 12: 40:16 24/07/09 (admin-1) ADVERTENCIA essbaseDriver.FailedToBuildDimensionException +.
  + 12: unexpected exception SERIOUS cubes from 24/07/09 (admin-1) 40:16 + EssbaseExport to be deployed
  -Exception-
  com.hyperion.cp.datasources.export.essbase.EssbaseDriverException: could not deploy Essbase cube
  ....
  
  
  Thank you for everyone who has an idea to help me solve this problem.
  
  A.S.

  Hello

  If you type database SID lowercase, try entering ITO uppercase. Strange, but my colleagues and I encounter this behavior several times.

• Jolt 1.2 Tuxedo 6.5 on Solaris 10 sparc is not establish connection

  Hello
  
  I installed Tuxedo 6.5 on Solaris10 sparc because my application was not compiled with a later version of Tuxedo. Then I installed Jolt1.2 there. I configured the tuxedo and all the application servers. While startup FINGS server starts but JSL fails with the JOLT_CAT:1008 error: could not establish connection to the server / / 10.10.100.110:9500. After that, it gives Tuxedo error 'tpsvrinit() failed '. As had been suggested in some other messages I already checked if shipping is free or not with the command "netstat - a | grep 9500» There is no coming out to the above command. But the same configuration works very well with Solaris 8 sparc. IP address of the machine is 10.10.100.110 and the hostname is "systest".
  
  The ULOG file extract is as below:
  092910: TUXEDO Version 6.5 SunOS 5.5.1 sun4u sparc SUNW, Ultra-1 credits.
  095316.SysTest! JSL.19863: LIBTUX_CAT:262: INFO: Standard master boot
  095316.SysTest! JSL.19863: INFO: JOLT listener version-Jolt 1.2 [08/31/1999-40]
  095317.SysTest! JSL.19863: JOLT_CAT:1563: INFO: serial number: < 1124052 >, Expiration Date: < none >
  095317.SysTest! JSL.19863: JOLT_CAT:1564: INFO: owner: Wipro >
  095317.SysTest! JSL.19863: JOLT_CAT:1008: ERROR: could not establish listening on the //10.10.100.110:9500 network address
  095317.SysTest! JSL.19863: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
  095317.SysTest! tmboot.19860: CMDTUX_CAT:825: ERROR: process JSL in the main failed with / t tperrno (TPESYSTEM - internal system erro
  (r)
  
  
  When I run several version of Tuxedo JSL starts without any problem. It establishes the connection easily. But my applications cannot be recompiled with a superior version of tuxedo that's why I am forced to use 6.5. I am confused, whether all the problem of different versions of jerk and Tuxedo or it's my configuration problem. Kindly help me.
  
  Kind regards
  Shashi Ranjan
  
  Published by: user5547545 on September 28, 2010 10:39
  
  Published by: user5547545 on September 28, 2010 22:12

  Shashi,

  Tuxedo 6.5 needs a patch to run on versions of Solaris or the WSNAT_CAT:1008 or JOLT_CAT:1008 "error: could not establish listening on the network + netaddr address +" message may appear.
  The thread could not establish listening on the network address describes a similar problem with the WSL and the ULOG in that thread also "TUXEDO Version 6.5 SunOS 5.5.1".

  You can get the fix last roll of Oracle support. (It would be even better to move to a later version of Tuxedo, Tuxedo 6.5 being beyond its end date of life on Solaris. I hope some compilation problems, you later with Tuxedo releases can be solved rather easily.)

  Kind regards

  Ed

• When you try to activate Windows I get an error: Code 45123 could not establish a connection with the activation server.

  the error number is 45123 and said "we could not establish a connection with the activation server." Please give me an answer to this error and try to solve it! If you want I can send you my product key to activate it, but I think it's better on email not here because there are a lot of... the pirates who have access to this site! provide me with an email address and I'll send you my product key and try to activate it and then give me the id I need to enter the activation window! Thank you!

  I solved this problem! Thanks for the help!

• System will not be activated. Receive the error message "system could not establish a connection with the activation server.

  Activation.

  My OS system has been altered, so I formatted and installed new, but can not activate. I have this installation id 348020-631951-163976-154093-556113-629786-940105-229483-661432, I need confirmation id because my system could not establish a connection with the activation server

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• How can I fix my internet connectivity problems: entry msafd tcpip tcp provider ip could not perform looping simple communication

  WinSock diagnostic

  WinSock status
  info all base service provider entries are present in the Winsock Catalog.
  channels of information the Winsock Service provider are valid.
  error entry MSAFD Tcpip [TCP/IP] provider could not perform the looping simple communication. Error 10055.
  Info entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test.
  Info entry RSVP UDP Service Provider provider passed the loopback communication test.
  error entry RSVP TCP service provider provider could not perform the looping simple communication. Error 10055.
  connectivity error problem exists with an installed LSPS.
  repair automatic action: WinSock Reset catalog
  action completed successfully: netsh winsock reset catalog
  the information system required reboot
   
  Diagnosis of network adapter
  Network location detection
  Info to help home Internet connection
  Identification of network adapter
  Info network connection: name = Local, Device network connection = Intel(r) 82566DM Gigabit Network Connection, MediaType = LAN, type = LAN
  Info network connection: name = 1394 connection, device = 1394 Net Adapter, MediaType = LAN, type = 1394
  Info network connection: name = Sprint PCS Vision, peripheral = Palm Treo Modem, MediaType = PHONE, type = NONE
  Info Ethernet connection selected
  State of the network adapter
  Info network connection status: connected
   
  HTTP, HTTPS, FTP Diagnostic
  HTTP, HTTPS, FTP connectivity
  WARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12017 connecting to www.microsoft.com: the operation has been cancelled
  WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
  WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
  error could not make an HTTP connection.
  error could not make an HTTPS connection.
  error could not make an FTP connection.
  [/codebox]

  Hello

  You did changes to the computer before this problem?

  Try the steps and check them out below:

  a. open internet explorer.
  b. click on tools > Internet Options.
  c. click on the Connections tab.
  d. click the LAN Settings button.
  e. uncheck all options on the shortcut menu.
  f. click on the OK button.

  Similar problem: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/error-12029-in-ie-8/47a865dc-3237-4e07-84a9-d9fb20a766e3

• Could not establish remote JDBC connection

  Hello
  
  I have a very simple test java class, that uses JDBC to test the database connection.
  
  A: machine Windows 2003 Server Enterprise Edition. He was Oracle 10 g 10.2.0.4.0 and my JdbcTest.java program.
  B machine: my laptop. Windows XP Professional 2002, Service Pack 3. There 10.2.0.1.0 Oracle. and there is a database instance that is called MYORCL0430.
  
  I am running the JdbcTest.java of the Machine, trying to make just a connection to the Oracle on the Machine B database. But it does not work. I would get,
  
  Exception in thread "main" java.sql.SQLException: IO exception: the network adapter could not establish the connection.
  
  Since then, I checked the following,
  (1) OracleDBConsoleMYORCL0430 and OracleServiceMYORCL0430 have been launched.
  (2) the Machine B, if I run sqlplus and connect locally to this instance MYORCL0430 using a valid ID username/password, I can connect fine. If I use Enterprise Manager to connect locally, I can connect too fine.
  
  It is copied from the tnsnames.ora file that resides in
  C:\oracle\product\10.2.0\NETWORK\ADMIN on the Machine A
  
  MYORCL04 =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 146 - xyz.abcd.com)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = MYORCL0430)
  )
  )
  
  (3) I decided to use tnsping to check further.
  Machine a, I did
  
  C:\oracle\product\10.2.0\BIN > tnsping.exe MYORCL04
  
  AMT Ping Utility for 32-bit Windows: Release 10.2.0.4.0 - Production on 2-SEP-28
  010 11:18:08
  
  Copyright (c) 1997, 2007, Oracle. All rights reserved.
  
  Use settings files:
  C:\oracle\product\10.2.0\network\admin\sqlnet.ora
  
  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = 146 - xyz.
  ABCD.com) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = MYO
  RCL0430)))
  TNS-12535: TNS:operation expired
  
  As you can see, the database on the Machine B is probably not configured correctly and could not be tnsping-ed.
  You have any suggestions on how to fix this?
  
  Thanks in advance for your help,
  
  ST
  PS: JdbcTest.java program is attached at the end.
  _____________________
  
  jdbc package;
  
  import java.sql. *;
  import java. IO;
  
  class JdbcTest
  
  {
  
  Public Shared Sub main (String args [])
  throws SQLException, IOException
  {
  
  Load the JDBC Oracle driver
  DriverManager.registerDriver (oracle.jdbc.driver.OracleDriver (()) new;
  
  Prompts the user for connection information
  System.out.println ("Please enter the information to test the connection to the database');
  The user of the chain;
  String password;
  
  user = readEntry ("user:" "");
  int slash_index = user.indexOf (' / ');
  If (slash_index! = - 1).
  {
  password = user.substring (slash_index + 1);
  user = user.substring (0, slash_index);
  }
  
  on the other
  password = readEntry ("password:" ' ");
  
  System.out.Print ("connection to the database... ») ;
  
  System.out.Flush ();
  System.out.println ("connection... ») ;
  
  27/09/10, fails on this line
  Connection = Conn
  DriverManager.getConnection ("jdbc:oracle:thin:@146-xyz.abcd.com:1521:MYORCL0430",
  user, password);
  
  System.out.println ("connected.");
  
  A CREATE statement
  
  Statement stmt = conn.createStatement ();
  
  Do the SQL thing ' Hello World'
  
  ResultSet rset = stmt.executeQuery ("select ' Hello World' from') dual;
  
  While (rset.next ())
  
  System.out.println (rset.getString (1));
  
  close the result set, statement and connect
  
  RSet.Close ();
  
  stmt. Close();
  
  Conn.Close ();
  
  System.out.println ("JDBC from your installation is correct.");
  
  }
  
  
  Utility function to read a line from standard input
  
  public static String readEntry (string prompt)
  
  {
  
  Try
  
  {
  
  StringBuffer buffer = new StringBuffer ();
  
  System.out.Print (quick);
  
  System.out.Flush ();
  
  int c = System.in.read ();
  
  While (c! = '\n' & & c! = - 1).
  {
  buffer. Append ((char) c);
  c = System.in.read ();
  }
  return buffer.toString () .trim ();
  } catch (IOException e) {}
  
  Return ' ';
  
  } }
  
  }

  (1) JDBC thin do NOT use or need tnsname.ora
  (2) thin JDBC requires functioning listener.

  In some/many/most cases, the errors indicate poor level of the OS or network configuration.
  Oracle is a victim; not guilty.
  Fix must take place at the level of the BONE & has nothing to do with Oracle.

• BPOS error "could not establish a secure connection t server. Please check if you have installed the required certificates.

  Hello

  We use the Microsoft Online Service in our office.

  The user is confronted with the question by connecting to the Microsoft Online Service, it gives the error could not establish a secure connection t server.  Please check if you have installed the required certificates.

  The one you suggest to fix the problem

  Thank you

  Hello
   
  Note that your computer is under domain, you must contact the technet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/category/MicrosoftOnlineServices

• Connection to blog___An error error occurred when tries it to connect your underlying connectio of blog___The was closed. could not establish trust relationship for the secure channel.__you SSL/TLS must correct this error before proceeding

  I installed Microsoft Security Essentials 2 days back... I get some error messages since then.

  I use Windows live writer to load my post on the blogger. My computer is Windows XP with SP3.

  Since installing MSE, when I try to post on my blog using windows live writer, I would say an error message:

  "Connection to the blog error."

  An error occurred while trying to connect to your blog

  The underlying connectio was closed. could not establish trust relationship for the SSL/TLS secure channel.
  You must correct this error before proceeding. "

  Please help me solve this problem. Your valuable advice is apprecited. Thank you.

  Post in the MSE forums:

  http://answers.Microsoft.com/en-us/protect/default.aspx