lack file g7i0ol_kaz.exe

Similar Questions

• Vista fails to boot after SP1 update. Lack file ntoskrnl.exe

  I have Windows Vista Home Premium and has just installed SP1 upgrade.  The PC now not restart, even in safe mode.  As soon as he tries to load Vista, an error message occurs: ntoskrnl.exe missing or damaged.  I tried to boot from the resettlement drive provided by Dell, but the same error occurs.

  I ran dell seed assessment tool and the material is very good.

  What should I do to fix this file?

  Thanks in advance.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Setup error "the system cannot find the specified file" (hpzprl40.exe)

  Trying to install HP Photosmart c5180 all-in-one using the latest version of the software download at HP and have Windows 7 Asus desktop computer. Receive error install "the system cannot find the specified file" (hpzprl40.exe), and the wizard stops.  Help, please.

  Hi loveisus,

  Try using the brush included in the CD or download. Let me know what you find?

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

  10. run the download to reinstall the printer

• Satellite X 200 - 25 G: problem of Flash Cards - Run time error file TCrdMain.exe

  Hello world!

  I don't know how, but I have a problem when my windows Vista from (running)
  The problem is with these file TCrdMain.exe this file is for Flash cards, end running every time when I put my PC on (with windows startup). But I see this problem: "Run time error file TCrdMain.exe ' and I should click Close.
  I don't know where can I uninstall this program and when I find that driver (Software) (if I uninstall and then install this driver, maybe that everything will be OK). This is the main problem.

  And another question...
  There are so many programs with this computer (laptop), and if I want to install Windows XP for example, where can I find everything (each programs) there may be 10 or 15 pograms.

  It will be a big problem if I change my OS. Y at - there a site where I can download, everything...
  Thanks for the replies, nd sorry about my English :-) skills
  Best wishes from the Bulgaria and have a nice day!

  Post edited by: me

  null

  Hello

  I'm not very well why the executable Run TCrdMain.exe error, but it is certainly up to Toshiba FlashCard software and the FlashCard belongs to the package Toshiba Vista added value m.

  Kody is good. Reinstall the VAP and check if this helps solve this problem.

  With regard to the question of the other;
  You are right; the notebooks are preinstalled with many different applications. But it is necessary because the laptop supports many different features.
  However, if you want to install XP OS on the X 200 PSPB9E series, you will need drivers Toshiba XP and all need Toshiba XP drivers are available on the European driver Toshiba page

  You must install all the drivers available if you want to use all the features of the laptop.

  Concerning

• Satellite U200: The file 'setupdiu.exe' is not marked for installation of BT

  When I tried to install the last stack of BT on my Satellite U200 installation stops with this message:
  The file 'setupdiu.exe' is not marked for installation.
  How to handle this problem?

  Hello

  you say the last won´t of BT-stack install? Which version is on your system installed? Sometimes an installation program needs a specific previous version to be able install
  the next higher version.
  So where you downloaded the package?

  Would be recognizing some comments, can we get a resolution.
  Welcome them

• executable file. Exe

  Hello.. I'm starting to work with Labview, so I need help.
  After you create an executable file. Exe
  When I create an app for a client... this software to install on your machine to run the application?

  Gratefu

  You will need the engine running for LabVIEW that matches the version of LabVIEW that was used to create the .exe.

  You also need the VISA run-time engine (if you series, or any other communication of VISA based ports).  Also drivers DAQ if you're doing data acquisition.

• Has received a warning about the following: the file wmplayer.exe, version no. 11.0.5721.5145 where 12.0.7601.17514 was expected.

  Original title: received a warning about the following: the file wmplayer.exe, version no. 11.0.5721.5145 where 12.0.7601.17514 was expected. How to find and update the file, please.

  Has received a warning about the following: the file wmplayer.exe, version no. 11.0.5721.5145 where 12.0.7601.17514 was expected. How to find and update the file, please.

  You try to install Windows Media Player 11?

  Try to run a scan of the file system to see if he can fix it: http://support.microsoft.com/kb/929833

  You can also try a system restore: http://windows.microsoft.com/en-US/windows7/products/features/system-restore

• MY question is on October 22 How can I restore file "SndVol32.exe" once I have it?

  I really do this more difficult by asking a similar question to the one I asked 8 months ago. It's my fault, so I'll try again.
  I need to answer the question that I want or I'll get an answer to a different question. I tell my students
  "It's a very good answer, now you answer the question I asked?

  I need to * run the file "SndVOL32.exe".    I got the file I386 on my installation disc and am now in
  My Documents and a flash drive.

  I'll open this one up;  Can someone tell me what to do with the file?        Please don't tell me where I can get him!

  Glen A Jacquart * address email is removed from the privacy *.

  Hi glenjacquart,

  -What version of the operating system is installed on your computer?

  If you have Windows XP, I suggest you to consult the following link to restore the SndVOL32.exe file.

  Volume icon is not displayed in the notification area, and you may receive an error message when you try to add

• Setup cannot copy the file hpinkins5412.exe

  Setup cannot copy the file hpinkins5412.exe

  Using full features software and pilot OJ6500_E710n - z_334.4

  When I use this version:

  full feature software and driver OJ6500_E710n-z_1315

  All software installs normally.  I get all the correct screens.  I connect to a network printer. He fined the printer. He asks me where (postcode), I use the software.  I re - start.  The drivers are not installed.  I have run the diagnostics.  He said that the drivers are not installed.

  HP Officejet 6500 has more 710n

  XP Pro sp3

  I solved the problem with the latest version of the software:

  full feature software and driver OJ6500_E710n-z_1315

  The pilot would not have installed.  I used this web page to fix:

  http://support.HP.com/us-en/document/c01084522

  Thank you

  Docfxit

• Could someone tell me: How can I download the file "dumppo.exe" from the Microsoft website. Please write to me at: * e-mail address is removed from the privacy *; Thanks in advance.

  I want to download the file "dumppo.exe" from the Microsoft site, but I can't find where to download it!

  No longer seems to be available.

• where can I find the file "spupdsvc.exe.

  I am running Windows XP Home Edition and cannot install the update to Windows (KB898461). The challenge is to go to the system 32 folder and find the file "spupdsvc.exe. My Windows XP program has no file of this type and I'm stumped. Is there another difficulty out there who does not have the spupd file or is it possible to import only one file in my program?

  Thanks, Terry

  Maybe a problem with your version of XP. You can avoid the error by masking the TI-

  1. click on start, point to all programs, and then click Windows Update or Microsoft
  Update.
  2. click on customize.
  3. Click to uncheck the box next to the update you want to hide.
  4. expand the update you want to hide, and then click on the "don't show me this update again.
  Once again"check box.
  5. click on review and install the updates.

• Service Pack 3 update fails error file ntkrnlpa.exe is open or in use by another program

  Original title: Service Pack 3 update fails

  I'm trying to update windows xp with service pack 3. I have download the update. When I try to install, the update fails with an error message"
  "File ntkrnlpa.exe is open or in use by another program", when no programs are running... Why?, he said.

  My stops to update SP3 and I cannot resolve the error message, how can I fix it?

  Hello
  Try the methods provided below and check if the problem persists.
  Method 1:
  This problem may occur if some third party software interferes with the installation of Windows XP SP3.
  Click on the link provided below for more information on how to set up your computer in a clean boot state.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note:
  How to configure Windows to use a Normal startup state
  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
  (a) click Start and then click Run.
  (b) type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  (c) click on the general tab, click Normal Startup - load all services and device drivers and then click OK. When you are prompted, click on restart to restart the computer.
   
  Method 2:
  
  Download the update manually, and then install it.
   
  Windows XP Service Pack 3 network installation Package for IT professionals and developers
  
  http://www.Microsoft.com/download/en/details.aspx?ID=24
  See also:
   
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
   

• lack of winlogon.exe (or dll) in c:\windows\system32

  while eliminating some malware, I deleted the file 'winlogon.exe or winlogon.dll' dir 'c:\windows\system32 '.  of course now I can't connect to windows at all; the boots of the machine to the windows logon screen, click on admin account or user, flash wallpaper, then back to the logon screen.  This happens no matter which mode (safe mode, safe mode with command prompt, normal) I try to start in.  How to restore the winlogon file in the folder "c:\windows\system32"?  Thanks for your help.  Chris

  Since this question I've tired using the Repair Console to extend winlogon.exe in the system32 dir. could not expand the file.  but, I was able to access and read what files are in the directory c:\windows\system32 on the machine and found that the if the dir winlogon.exe.  but I'm still not able to go beyond the login screen; I start on the windows logon screen, click account admin or user, there is a flash of the wallpaper, then back to the logon screen.  Thanks again, Chris

  Never mind.
  I tried the repair console, does not
  I tried to repair, does not
  I tried to reinstall without format, does not
  so I just wiped the drive and do a fresh install.

• Lost files: rundll32.exe

  I accidentally put my port of the printer to the incorrect port so the computer cannot find the printer.  During the attempt to reset port, procedure requires the choice 'System' in the control panel.  But I get the message: C:\windows\system32\rundll32.exe is not found.  What should I do to recover the file rundll32.exe?

  http://www.dll-files-download.com/R/2008-01-13/15185.html

  You can download the file here, do not click on download the missing DLL click Download this file down. Next page, ignore the box and click Download now under him. Save the file and when you unpack it point the file to C:\windows\system32

• Windows xp sp2 Setup error: Setup cannot copy the file: usrshuta.exe.

  I want to install windows xp sp2 on the new hard drive and got the following error: Setup cannot copy the file: usrshuta.exe. How to do this?

  Hi grant561,

  Usrshuta.exe is a process belonging to the family of US Robotics communications hardware and provides additional support to the US Robotics modems.

  I suggest that you disconnect all external devices connect to the computer except the keyboard and mouse and proceed with the installation.

  How to install or upgrade to Windows XP

  http://support.Microsoft.com/kb/978307