Vista fails to boot after SP1 update. Lack file ntoskrnl.exe

Similar Questions

• Windows Vista fails to boot after updates combined with Mcafee instalation.

  The laptop is a 2007 medion mim2330 running 32 bit vista Basic.  He was protected by Bullguard, but it had expired and has been exceeded. A message appeared on the screen WARNING french that he had been infected by a virus - it does not look official and I am not sure that he clicked on the option to download solution - however the phone still worked. I had a Mcafee 3 user license and wanted to install it so I uninstalled bullguard and installed Mcafee process windows crashed and failed to WINDOWS START SCREEN appeared and I was unable to boot windown in any mode. I gave the phone to a knowledgeable friend who said it was a virus, but did not know that one - he said, it has been deleted, all hardware tests had been run and it was perfect. It has resized the partition of disk doing a great score including a remains a very small. He reloaded windows with avast antivirus and gave the laptop back to work. I wanted to use the Mcafee I had paid for, so I uninstalled avast and installed Mcafee. Everything went well and the laptop worked - however the mcafee warning sign came up saying scan in real time has been disabled - he turned back, but a few minutes it turned off again. I have contacted Mcafee used virtual tech then chatted in their eng who suspected a virus, a virus scanner from mcafee, rather than the laptop - it was very good. While the computer restarts windows laptop crashed and the WINDOWS FAILED to START SCREEN has appeared. I gave it back to my friend who reloaded windows and avast and widely used for a week. When we got it back avast had been removed and there was Windows Defender - didn't light alarm does not. We loaded on Mcafee and had plenty of updates (and hours) then tried windows live messenger telling to SP1 and SP2 are necessary. They were charged after an eternity using automatic updates of windows. After everything has been loaded on a final restart gave place WINDOWS failed to START screen and does not start in any mode. I thought it might be linked to the abduction of an antivirus and the installation of another, so I put in the original Windows restore disc in and formatted the large partition, then reloaded windows and all its drivers then went on updates auto and auto updates for 24 hours until what he said to date. Installed mcafee - no problem, then tried windows live essentials that required sp1 and SP2 - used auto updates to download SP1. When this is completed there were two messages from Mcafee saying restart the pc and the other problem Center and soln windows saying an upate problem was found to go online to find the solution, I checked windows update history and SP1 and all other updates were installed successfully, so I rebooted the laptop - at which point it crashed and WINDOWS has no PU START APPEARED to-it wont start in any mode. Suggestions as to the cause and or how to make the process of restoration in less time - much appreciated. We have a same laptop bought at the same time, running the same original software and Mcafee - never a single problem. Thank you very much

  Usually, this means that Windows could not load the packages of metadata for some devices on your computer. If you do not already have it, you can run chkdsk/r (there is a space between thek and /) to verify the integrity of your hard drive. Follow the steps below:

  1. reboot your computer

  2. immediately press theF8 key until you reach the Advanced Boot Options menu

  3. Select Safe Mode with command prompt.

  4. at the command prompt, typechkdsk/r

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista will not boot after installed updates

  After installation of .net Framework 3.5 Service Pack 1 for .net Framework Assistant updates. 1.0x86 (KB963707) and Windows Vista (KB968389) to my Dell XPS M1330 laptop, my computer did an automatic stop down. I couldn't restart my computer correctly after this {2nd time this has happened}. I restarted my time 1st comp by selecting the command prompt and the 2nd time by catering to last known position. I did all as usual by pressing F8, F12, F2, diagnostic test, memory test and a little more. Right now I'm running, but I'm going to be scared to do another update when the time comes. Can someone help me please on this issue. Many thanks in advance, Ron

  Hello

  1. keep good backups of your data using redundant methods.

  ------------------------------------------------------

  2. it is very possible that updates do not install correctly are the symptoms of the real problems
  and not the real cause of their.

  ------------------------------------------------------

  3 set updates download but you can install them - and you can install them one at a time if necessary.

  Control Panel - Windows Updates - left settings.

  and run it to restore updates

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  ------------------------------------------------------

  4 do these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------

  5. record how to remove updates if necessary:

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

  Or

  The problems with the removal of updates
  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• M1212nf fails to boot after firmware update

  The full printer name is LaserJet M1212nf MFP.

  I was installing the complete package driver, not the minimal driver file, on a new system of Windows8 is the only wireless. The printer itself has a wired connection to the switch.  He was already working for a Windows Vista, Windows 7 and Linux systems.

  During installation, it attempted to load the firmware - I don't know if it has been completed or not.  Now, the printer does not really work.

  Since then, even after several cycles of power > 30 seconds, the printer continues to repeat the message "initialization".... ' without ever coming to the ready state.

  I tried to reload firmware, this time by the Windows 7 laptop via a usb cable, but it does not appear to be able to connect.

  This printer is watered constantly, or is it possible to reload the firmware in new since I assume that the currently loaded or partially loaded firmware is the problem.

  Thank you.

  Hello world

  If you've posted on the forums about this, you will find I recently sent a private message to each of you, and has nothing to do with more troubleshooting. If you have not already posted on the forum about this, please reply to this topic to let me know that you have problems.

  Please see the update private message send you in the last two weeks. I would like to hear from each and every one of you who received a private message from me in order for me to solve this problem. Please let me know if you have any questions.

  In private messages sent, I ask you to contact you by phone or email. This information is private and should not be given the open forum pages. Please visit the private message that I sent you in order for me help solve the issue. This has nothing to do with in warranty or out of warranty that everyone on this thread has got the same message private that you got me. Please get back to me as soon as possible.

• Vista not load/boot after update

  Hi all

  I use Windows Vista on a Dell Dimension.
  Last evening, vista automatically downloaded and installed new updates and probably it needed a reboot. somewhere in the middle of the night, windows tried to restart.
  Today morning that I wake up to find that my PC freezes in the first reboot stage where it scans the CD and hard drives. No matter how many times I reboot or how long I wait, it will not move from this page frozen and does not load vista and start.
  What is the cause of this problem and how can I solve it?
  Many thanks and thanks to anyone who can help me...
  ~ Amy

  Hi Amy_rocher

  (1) try last known configuration of God since the menu advanced boot options and 'disable automatic restart in the event of system failure', to start in the last known good configuration or 'disable automatic restart in the event of system failure', press the F8 key when the system is restarted.
  (2) try logging in 'safe mode', please see this link to start 'Safe mode '.
  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx
  (3) If you were able to start in safe mode, try to clean boot because some third party software may be casuing the problem, try to clean boot, check out this link:
  http://support.Microsoft.com/kb/331796

  Answer once you follow these steps and let us know the status.

  Thank you
  Anthony

• machine is trying to perform a PXE boot after installing updates-"operating system not found error" when PXE boot

  Original title : Aucuns OS after installing updates save broken disk how to reinstall windows vista

  I installed the microsoft updates on my Vista laptop and now the system does not start. Error message is:

  Check the connection of the cable! PXE - MOF:
  exit Intel PXE ROM.

  Operating system not found
  Backup of disks were damaged
  starts from disc downloaded ubuntu, so no problem with a hard drive.
  Cannot access then unable to return to the last good configuration safe mode?
  where can I download vista to reinstall?

  Hello

  Contact your computer manufacturer and ask them to send a set of recovery disks Vista.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Read the responses in these links on the false boot order and network devices.

  http://www.techsupportforum.com/forums/F16/PXE-MOF-exiting-Intel-PXE-ROM-41235.html

  http://www.computerhope.com/issues/ch000706.htm

  See you soon.

• Satellite R630 - problems of Driver on Win 7 64 bit after SP1 update

  That need your help here guys.

  My R - 630 Satellite is less than a year, under a Windows 7 Home Premium 64 - bit. For awhile, I've known BSOD, which I traced him through the observer of events here: http://technet.microsoft.com/en-us/library/dd337789 (WS.10) .aspx

  This has not led me far enough.
  Finally, I have found through other forums that the SP1 update would solve some of the annoying problems BSOD and I started the download and upgrade. However, when the computer reboots, while my laptop seems to have been healed (so far) of the BSOD, I have problems with drivers for:

  -Sound card
  -USB controllers
  -DVD player
  -Webcam
  -Bus enumerators

  I downloaded the indicated Win 7-64 bit drivers in each case. I tried to install the first. Nothing happened. I uninstalled the existing and installed new drivers. Nothing happened again.

  I thought I should do things in the right order.
  So I tried to install
  (1) the Chip Set Utility (drivers?) first, then
  (2) the USB drivers
  (3) sound card drivers etc.

  Nothing happens not always.

  I'm running out of ideas here.

  PS while other drivers run very well when I extracted the .zip format, the sound card driver, refused to run, even if the box "run command" has been checked when executing the .msi file.
  I've pulled into a folder and ran it manually.

  Still did not help.

  Hello

  What happens if you set the Windows operating system to the point before the SP1 has been installed?
  That you get the BSOD?

  I would recommend this doing.
  Use the Windows option that allows you to activate the operating system at the point of time at the beginning.
  Then, test the functionality of the OS.

  If everything works correctly, update the Win 7 64 bit with SP1.
  You must use the automatic update of Windows 7.

• Pavilion dv6-3225dx: laptop fails to boot after upgrading RAM.

  Hello

  Recently, I tried upgrading my laptop RAM 8 GB which is max you may have to wait. The RAM sticks were (x 2) DDR3 4 GB Samsung 1600 12800 mhz 1.35v. The system has detected the new RAM, showed the new memory and even spent the memory test. But this isn't the windows startup. I tried to clear CMOS. But without success. Do not let me windows. BIOS version is up to date (F29). Is there any setting for this?

  Thanks for all the help!

  Hello:

  Please see this discussion.  It must be very picky about what memory you use in your model series...

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/Pavilion-DV6-Windows-10-wont-boot-after-memory-upgrade-4Gb/m-p/5776161#M359223

• T500 takes 15 minutes to boot after bios update

  symptoms:
  It takes about 10 or so minutes to reach the thinkpad press f1 to set up the screen, after that it gives me a screen that tells ME is initializing, it is after an update of the bios and later roll back bios. two updates to the bios give me the same result. functions of sleep also seems to not work, once im in my t500 windows works normally.

  what I did:
  In addition to rolling back the drivers Ive unplugged / replugged the cmos battery and off AMT. Ive also ensured that all my drivers are up to date.

  machine is a performer of 2081-cto on win7

  someone has an idea of what I can do? I still have a warranty but I would like to fix myself so I don't have the time.

  
  

• Notebook G71 won to boot after BIOS update on HP site

  I just updated the BIOS on my notebook G71... I downloaded the update from the HP site and it has been updated V20 to V23.

  After the update, the system became an automatic restart and now it does not move before the initial startup screen that shows HP and "ESC to return to the Start Menu" logo at the bottom. I tried the ESC key, but nothing past then is except that it says "esc... pause start." Nothing anyway. Now I can't reboot my system and it is dead. Help, please. Steve

  Unplug the power cord, remove the battery, hold the power button for a total of 30 seconds, connect AC only, see if it will load windows now.

• lack file g7i0ol_kaz.exe

  Recently, I ran a cleaning Spybot Search & Destroy, and the next time the system starts, I received a message that the file g7i0ol_kaz.exe is missing. The name in the title area in blue at the top of the message window is RunDLL.

  I created a small file in the location of the missing file, but the message has changed from missing to invalid. He said that it was not valid for a Win32 program.

  If I close the message window and continue, the system feels no particular effect. Everything seems to work normally without the file, but I'd like to get rid of the pop-up window at startup time.

  My search for a downloadable file from Microsoft provided no help. The file is not found. I found some information in a Forum search, but it was German, so I couldn't read. I made a translation of some passages, but it was no problem explanation that the solution was so no help for me.

  Anyone know how I can recharge the missing file so that the program that is looking for what he can run? Or the program that has need of the missing file can be identified and deleted if it is not necessary?

  Thank you

  Roger

  Hello

  Reading this on your g7i0ol_kaz.exe missing (MALWARE)

  http://www.prevx.com/filenames/X553940231631723406-X1/G7I0OL_KAZ.exe.html

  It seems that Sybot S & D removed but left a boot entry.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• Computer fails to boot after installing SP1

  I use Vista without SP1 for quite awhile. I've just updated to SP1 since the message kept popping on my screen. Now the computer will not book. I used the original vista bootable CD and clicked on repair. He began the process of repair, but got stuck at the same registry error

  !!! 0xc01a001d! 35032/165955 (\Registry\Machine\COMPONENTS\DerivedDat...)

  Thus, even the repair doesn't seem to work

  I need to fix this since I have a lot of important files on my hard drive.

  Support for Vista Gold (no Service Pack) ended on Tuesday, April 13, 2010. If you get only to try to install SP1 (and it is NOT yet installed), ALSO lack you the value of six months of critical security updates. Therefore, it is almost 99.9% certainty that you see the effects of a long infection date hijackware.

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

  VERY IMPORTANT! -Online any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista unable to boot after installation of the update

  Hello.. I don't know where to ask this question... About 3 days ago my computer was working fine with Vista.  I closed the lid of my laptop, and when I opened it, it is stuck on the green scroll of the taskbar with Microsoft Corporation under him, as when you start up.  I run a system check, startup repair, restored to an earlier date... all I can think about... short reformatting and reloading... suggestions?  I am a teacher and my notebook (which is due by next Friday) is caught in the trap in the confusion!  Thank you
  Jenn

  Hi KieransMon08,

  Thank you for using answers Forum.

  Do you mean the computer freezes on this screen, forcing you to restart the computer from the laptop power button?
  You can log in in safe mode?

  Are there any error messages, that you can post on this forum?
  What happened when you tried to do system restore, did it fail or simply not to solve this problem?
  You have a Vista installation disc, or you use a recovery disk?
  How were you running the System File Checker and system restore?

  Impatience back on your part.
  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• TOSHIBA DVGW/HD TS-L802A-ATA does not work after SP1 update

  Hello

  My Toshiba TOSHIBA DVGW/HD TS-L802A-ATA won't allow windows Device Manager to load the system (pilot) since I've updated with Vista SP1.

  I tried uninstall the DVD but when I restart the driver didn't reinstall but I get a Code 19 notice saying the driver instalation failed.

  Any help will be much appreciated.
  Medicalman

  See also http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

  Good bye

• PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

  Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

  Hello

  I suggest you borrow the CD of windows vista to your friends

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you be able to start your computer in safe mode, I'd say make clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

  http://support.Microsoft.com/kb/2674065