lack of creating windows 7 install usb

Similar Questions

• Question: How can I format my locked Windows 8 install USB?

  I got a USB key to install Windows 8 with my new laptop computer.

  Eventually put Windows 7 on it, if I want to use the drive for other things.

  Question: How can I format it?

  I see no unlocking switch.

  Thank you

  Mark,

  I can understand your situation.

  Given that these Dell USB, I wish that you contact them for assistance. You will also have options to upgrade to Windows 7.

• Cannot install Windows 7 error USB "Setup could not create a new partition system.

  Windows 7 install gets o Acer Aspire 5100 hard (perhaps by EzBack Pro II)

  So the problem is that I want to install windows 7 (from USB, no more details coming soon), but it gives me the error "Setup could not create a new partitiojn system or locate a system partition. See thwesetup for more information log files".

  I flashed the bios because caouldn can't EzBackPro II freaking be uninstalled on vista.

  I formatted all partitions and have now 1 x 150 GB partition (still the partition OEM.. angyr I because recovery tools did not work ~. ~)

  now I want to install windows 7 and it does not just ;/

  any help? I hope that I destroy my laptop ;/

  Hi Grasmanek,

  You can try to dollow steps and check if it helps you to difficulty of installation of Windows 7 from a USB.

  (A) have no USB stick plugged in when the computer starts.

  (B) in the configuration page that says that you can load other drivers, insert the USB key, then click on the link and load drivers.

  (C) disconnect the USB.

  (D) to continue with the installation and check if it ends well.

   

  Access the links below and make sure you follow the steps mentioned in the items to install Windows 7 from a USB key.

  http://TechNet.Microsoft.com/en-us/magazine/dd535816.aspx

  http://Windows.Microsoft.com/en-us/Windows7/installing-Windows-7-on-a-NetBook

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to install Windows XP via USB?

  Hello, can you tell me please how do create an ISO file USB that can install Windows XP on my laptop as there is no CD drive in my laptop?

  Looking forward to your kind response,
  Arvis

  If you have already the iso on your desktop or on your drive, you can use rufus

  Download RUFUS 1.20 here (read a few things on the page so you can learn more on this subject):

  http://Rufus.AKEO.IE/

  I will warn to be careful that don't accidentally format you a hard disk - don't forget your USB key is in and know what the drive letter! This part makes me still a little nervous, so be careful.

  (above is courtesy of Jose Ibarra)

  It will make a bootable USB key if your pc is able to boot from a usb key, you can see your start option in your bios.

• Can we install Windows XP on Usb HDD and start as long as internal HARD drive?

  Hello

  I have windows 7 installed on my drive HARD internal (connected to the motherboard using SATA/IDE port).
  Now, I wanted to use the Windows XP operating system and also do not want to install it on the internal HARD disk.
  I have an external HDD (HDD USB).
  Can I use it as internal HARD drive to install Windows XP on and boot from it?
  Thank you for your support.

  Sorry, USB drives are not taken in charge. But you can read this: http://www.techrepublic.com/article/illustrated-walk-through-creating-a-bootable-usb-flash-drive-for-windows-xp/6160062

  J W Stuart: http://www.pagestart.com

• How do we install 10 free update of windows on a USB?

  * Original title: install on USB

  How do we install 10 free update of windows on a USB

  You cannot install and use it, you can create a bootable copy to install on your local hard drive. Learn how to:

  How to download official Windows 10 ISO files

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• Iso file of windows xp can directly be installed USB on a formatted hard drive?

  Iso file of windows xp can directly be installed USB on a formatted hard drive?

  Not directly.

  There is a SMALL chance that if your hardware supports it (unfortunately never say you anything on your PC or BIOS), you can boot from a USB stick or an optical drive and install Windows XP like this.
  But it is unlikely.
  In addition, tell us what you mean by 'windows xp iso file. This is very vague, and we do not know what you are talking about.
  Finally, if you want to ask questions here, really read the answers and recognize them in some way. Here is a link to your other thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/which-software-should-i-use-to-burn-Windows-XP-ISO/ffd9ccb8-0248-4e1f-afd3-6ce14802348a

• Is it possible to install Windows XP with USB / (Pendrives) with a CD?

  is it possible to install windows xp with USB / (Pendrives) with a CD?
  my CD drive is not working... but I need to upgrade xp... How do with usb?
  a pls answer

  * original title - request for installtion xp... *.

  is it possible to install windows xp with USB / (Pendrives) with a CD?
  my CD drive is not working... but I need to upgrade xp... How do with usb?
  a pls answer

  * original title - request for installtion xp... *.

  Installation of Windows Xp from a usb key involves a lot more than simply copy the files from one windows on a USB disk. It is much more difficult than don't imagine most (but not impossible). I did it a few times. Read the instructions on the two links below. The first link below is your best bet. You are not likely to do things immediately. It's ok, we are here...

  Install Windows XP using USB Flash disk / Flash Drive - step-by-step Guide

  Install XP from USB - reboot.pro

• What is disadvantages of creating partition after installing windows Xp or windows 7 or Windows 8?

  What is disadvantages of creating partition after installing windows Xp or windows 7 or Windows 8?

  None in general, you can assign optical readers or card readers a different drive letter for drive letters may be consecutive.

  Specifically, if you're talking about reducing the existing operating system partition it is pretty reliable but could save all important files 1.

  The choice to create more partitions during setup of the system instead of when Windows is online I would choose the first when possible.

• Instalation USB Scanner on a Windows 7 (simplified version for laptop)

  My pc - windows 7 installed - does not detect a primax colorado direct flat scanner connected USB... is there a solution for this problem?

  Hello Luiz,

  It would be great if you can answer these questions to help you further.

  1. is the issue limited only when connecting scanner?

  2. have you made any changes to the computer?

  3. are you an error message or error code?

  Try the following and see if it helps.

   

  Method 1:

  Run the troubleshooter of material and check if that helps.

  Open the hardware and devices Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Hardware-and-Devices-troubleshooter

   

  Method 2:

  Try connecting to another USB port and check if the software is detected or try to connect the scanner on another computer.

  Method 3:
  Remove and reinstall all USB controllers.

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the Hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  Hope that the information provided is useful.

• Huawei Mobile Connect - 3G modem failed to install Windows 7 on USB 3 port.

  Huawei Mobile Connect - 3G modem failed to install Windows 7 on USB 3 port. I looked for the answers here and I can not find my problem even for questions answered with Dibcom TV Tunder device since I can't find this device in my laptop. He is able to install and operate in another laptop running Windows XP. Been tried to uninstall and reinstall more than 5 times and he continues to meet with even has no message and I even downloaded the latest drivers from the local Web of ISP site. Helpdesk of mcafee and contacted microsoft, but they are not able to solve my problem.

  Thank you.

  Managed to solve by referring to the answer below posted by Rudolph_DT asked on thread

  Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  Thank you.

• Pavilion x 2 10-n010nl: WINDOWS NOT INSTALLED

  

  "installation of windows: is impossible to complete the installation." to install windows on the pc restart installation.

  If I press 'ok' this message returns and the same thing with the 'X '.

  What can I do?

  Thank you

  OK, so let me correct me on the tools.

  You will need another Windows computer with an internet connection, a 8 GB USB key.

  Your Pavilion x 2 has already a normal USB port, so you don't have an OTG adapter or an external keyboard.

  On another Windows machine (laptop or desktop), you will need to install the Microsoft Media creation tool. Download 32 bit or 64 bit to match the other PC you borrow to make USB install drive with.

  Windows media 10 creation tools

  Once installed, launch it. When it opens, follow these steps:

  Choose "Create install to another PC media" and click Next.

  Select the desired language. Select Windows 10 House. Architecture, choose 32-bit (x 86) and click Next.

  Select a USB flash drive and click Next.

  Make sure that the correct drive letter is selected for your USB Thumb drive. He will probably want to name ESD - USB by default, and it's ok. Click Next.

  It will start to download Windows 10 and create the version installed on the USB key.

  Now that your installation drive is made, you can use it to install Windows 10 on x 2 flag.

  Makes sure that your battery is fully charged and the power is connected.

  Insert the installation disk USB that you just created in the USB port.

  Make sure that no other things aren't connected except the USB thumb drive, mouse cable and power.

  Turn on the Tablet and quickly start pressing the ESCAPE key to bring up the Start Menu in the Bios.

  Select F9 for Boot Device Options.

  The TOP or bottom of the arrows on the keyboard to select the USB.

  The USB key can start the installation or might open a window asking how to make the recovery. If so, select the program in the media.

  NOTE: IF the USB is not an option to select, you need to go back into the Bios and disable Secure Boot and / or also to activate Legacy Boot. Here, the link to the instructions for it and it will be the same for almost all HP computers.

  How to disable Secure Boot

  Once that Windows is installed, you will be asked to enter an activation key to continue.

  Choose to ignore this and allow the installation to continue. When Windows finally installed it can ask you again the key.

  Pass it again and let Windows update or force it to be updated manually. When it updates, it will be activated automatically. It will because you already had 10 Windows updated, work and previously enabled on this computer.

  If all goes well, I didn't confuse you again. Let me know if you have any other questions.

• I'm seting up a new system and trying to do a fresh Windows XP install on hard drive clean.

  However, when it will install the files it's about 50% and it goes to a blue screen saying IRQL_NOT_LESS_OR_EQUAL.
  My motherboard is ASUS M4A88T-V EVO. Pls Help

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are OverClocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect the other internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers brand and model, try "Speccy", provides information system/computer in detail
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Once Windows is installed:

  Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?
  Check their support site for the latest drivers as the CD that came with the computer
  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card: download and install the most recent Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the option 'stress test' for 4 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ): http://www.cpuid.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
  and the "SPD" tab shows the nominal speeds for each memory location that is filled.
  #2 Note:
  COMPARE the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com

• Desktop Pavilion p6-2011 pc: want to remove windows 7 install xp pro. How can I do this?

  Just picked up the machine above for my wife and want to remove Windows 7 install XP pro.  The machine does not allow me to do.  All the options in addition to removing the disc?

  Thank you

  Hello:

  You can install XP on your PC. You will need to install the drivers from the website of the manufacturer of each material.

  Lighter is right in the fact that HP will not support your PC under XP, so if you have problems operating system, don't bother calling HP support.  I guess that the material would still be under warranty.

  That being said... I guess that when you install the XP disc that it loads up, and when he says 'Setup starts Windows', he goes kerflooey, right?

  Well, it's because you need to load the SATA ACHI drivers for your machine when you receive this message at the bottom of the XP installation (press F6 if you need to load a SATA/RAID controller).

  So what you need to do, is go to your security & system menu in the Control Panel, click on Device Manager in Windows 7. Click on the small arrow next to the line of IDE ATA/ATAPI controllers.  Post back with the name of your listed drive controller.

  We will need to charge the correct SATA driver at the F6 prompt. You also need a USB floppy drive or a USB flash drive using the DCIS drivers copied on it, I will provide you with once you offer this info.

  You will also need to go into your BIOS and look in your storage options menu. See if there are parameters for the emulation of SATA mode. There should be 3 settings, ACHI, RAID and IDE.

  If there is an IDE framework, you can change your settings to that and load XP without going through all the stuff of F6, but you will then need to load this driver after installing XP for optimum performance of the road.

  Then I will provide you with the instructions to load the SATA ACHI driver if you can change your settings for the IDE BIOS.

  I'll give you also with the links (I hope) for many other drivers you will miss.

  I agree with also lighter it is imperative that you create these recovery disks before continuing with the installation of Windows XP.

  I'm pretty confident that you can get everything to work on XP.

  Paul