lack of the dept of color images in Firefox

Similar Questions

• Personas display only background colors, images, that I have the latest version

  For a while now, I tried to use personas, but only some work, others show that background colors and images

  You use the default theme?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• B & W converstion and keep the original color image?

  What is the best way to convert an original, a color in b & W image and keep the color image?

  Your original color image is never changed... Lightroom never changes the portion of the image of your original photos. So you can always go back to the color version if you want.

  One way to do is to create a virtual copy of the color image (select the image, then ctrl + apostrophe), and then convert the virtual copy to B & W, although you can also use a snapshot, or even to convert to B & W theoriginal, knowing that you can always go back to the color image.

• Make the palette of colors in an image

  Guess I have the sentence doesn't have the right to question... will try once again =

  1. I did a painting
  2. I want to do another painting by using the palette of color this picture (usually the swatches in Corel Painter, who does)
  3. No color indexed
  4. Palette of RGB or CMYK
  5. work with photoshop CS3
  6. the painting I did below
  7. Loved editor - need to do more art using the same colors - without picking up one both of the image

  

  Photoshop can do pretty much anything. What you did in painter, is exactly what you said in your first post you want to do, i.e. using indexed color. If you actually agree with to convert your image into 256 shades of color (which is what you did to the painter), you can do this in Photoshop by an indexed image. And unlike your example painter, who is only limited to the only option which makes a rigid preset, you can actually select the number of colors, the different modes of interpretation of the color (perceptual, Adaptive), etc..

• When you import images in LR5 on my laptop, the photos all have a broad yellow streak through them. This only happens on the laptop; I can import the images on my LR Office and he's not the streak of color.   Can anyone help?

  When you import images in LR5 on my laptop, the photos all have a broad yellow streak through them. This only happens on the laptop; I can import the images on my LR Office and he's not the streak of color.   Can anyone help?

  This happens even with pictures taken on another device, not just mine.  My daughter told me that the phone fell recently.  The yellow streak isn't nowhere elsewhere on the laptop, right on the photos in LR.

  It happens when you import new images. This pourrait indicate that the sector where the pictures are copied to is damaged. But it could be a faulty card reader or a bad cable if you connect the camera directly to the computer. It's a hardware problem. Your challenge is to figure out where this problem.

• Why no response regarding the lack of background and text colors?

  Although I see that two posts asking why this happens, the only answer has been asked which PC they had. I'm having the same problem (background colors and text are ignored) with this pavilion ze4900 (IE9.1). Pages display properly on my desktop PC but not on this laptop. Driver chart updated today but no change. I'm not formatting HTML simple like bgcolor = text color and black lime green = talking (even if the format #00000). I do HTML (no java, no flash, but a simple formatting) for my web sites and ebay auctions and have never had this problem other than on this laptop.

  After the search for other sources mentioning accessibility features, I thought about it. The IE Options for accessibility and the colors were not the solution, but by going to control panel, I found other accessibility options and had the function of "High contrast" which forced most of the elements without color and also made most of the invisible extra boxes (no border).

• Change from the inside of the text to an image instead of color

  This is probably a simple answer so apologies in advance!

  I have some text (see photo)

  How can I change the background of the text to an image, instead of blue? I want it to be a picture of bacteria instead of blue. I have all the adobe software, if I need pass programs do, but rather would stick with illustrator.

  Thank you!

  1. place your image

  2. position your text on this matter and make sure it is above him in the order of the stack (object > Arrange > bring to front)

  3. Select the text and the image and press ctrl + 7 (or object > clipping mask > make)

• How can I Pixelize an image without increasing the amount of colors?

  I recently created a design that uses three colors flat; fishing, blue and yellow. I want to Pixelize this design in the same way that the mosaic filter works, but without creating tones added to these colors.

  When you use the filter of the mosaic, I am able to get the effect I want, but it increases the colors by mixing shades together for each pixel. Is it possible to reduce or limit the amount of colors when you apply filters?

  Thanks in advance!

  Try color index with your three colors defined in a table.

• Save the change of color of the causes

  When I save an image in Photoshop or Lightroom, the saved image always ends by mute and almost a little blue.

  Here is a link to a screenshot of the problem:

  http://S25.postimg.org/rnfwu3xnj/Compare3.jpg

  The PSD has a lot more red, where the JPG is more cut and blue, with the front yellow looking sickly for lack or red.

  In this case I export from LR, or save as / save for web in PS. I tried to save it as a TIFF as well, and it looks the same. Both programs have been updated to their latest version, once I noticed the problem, but that did not fix.

  I'm saving up as sRGB in all cases, as well.

  What is the cause, and more importantly, how can I fix it? I need my files to look as similar as possible when recording!

  Then see what happens when the application that you view the image is not properly handle color management. That is, the color profile attached to the image that explains how the color is supposed to appear (like paint by numbers legend) is ignored and enforcement is to give a better idea of how the color should appear.

  This means that the colours are correct in the file, even when you see different in another application. In other words, it will print correctly if printing from an application/printer which correctly handles color management. However, if you want to view the image online and worried about how others will see the file, well, it's something that you will never no control on what you do not know what device displayed on the audience, what are the parameters of colors for this device, or what the conditions of observation are where this device is. In addition, most look at a browser is not color management.

• Check the development of an Image with Standard of LABVIEW functions

  Hello

  I want to determine the best quality of the development of a series of color images using features standard LABVIEW, an example my images would be KING of coins in copper or similar sample 2 mm x 1 mm. I do not have the Toolbox IMAQ vision, so this will not be an option. Could someone give me an example of this or point me in the direction I must go. Is it better to check the quality of the focus on the image of color or black and white image or perhaps a representation of the intensity of the image? I heard that the gap checking type of a line of pixels in the image would give a good indication of the quality of the development by seeking the higher SD all images?

  Any help is greatly appreciated!

  Convert the image into an array to IMAQ ImageToArray.

  Extract a single line or row of the table by using the table to Index.  Assuming that your image be U8, these will be U8 values.

  Digital conversion to Double can convert the array of double values.

  Use Rotate 1-d array with an offset of 1 to turn the table.

  Subtract the table of rotation of the rotation matrix.

  Deletion of the table to delete the first element of the array.  It's the difference between the first and last items, which is not desired.

  Absolute value to convert the table of all positive values.

  Use the mean or the standard deviation to measure the development.  I usually have better results with the standard deviation, but sometimes means gives good results also.

  Bruce

• IMAQ color image scale

  Hello

  I am trying to trace an image using a table 2D-data using IMAQ points.

  Creating a grayscale image is fairly simple, but is it possible to display the image as a spectral color image? i.e. Red corresponds to higher values, of the lowest and green blue values between the two, with a range of colors visible.

  All color for IMAQ functions seem to want an RGB input or some other encoding, but all I have is data digital bullies. Maybe I need to convert it somehow...

  Thank you

  Steve

  Right-click your image viewer and select "Palette > Rainbow."  It's exactly what you're looking for.

  If the result is not compliance, you can create a custom palette and say the display of images to use by plugging your palette to the node of property "to Palette.  Details can be taken from the Manual of Concepts of Vision. Details on pallets (also the rainbow palette) are here.

• in labview how can vision 2013 I extract image from plane red color color image in fromRGB?

  ...

  Okay, now I have what I consider to be an "acceptable" solution showing the R, G and B had an Image color.  He doesn't require a "pixel-by-pixel" approach that I posted yesterday, but works directly with color plans you get the RGB image splitting in his 3 grey U8 images.

  I enclose a demo project that I saved in LabVIEW 2012.  It is quite rudimentary - you provide a picture (I used the Microsoft sample pictures folder Desert.jpg) and it shows you the Image and the red, green and blue color had.  A switch allows you to view the plans of color and the scales of gray U8 (very easy), but also allows you to consider the R, G and B channels of color (a little harder to do).  In the latter case, the Image is, indeed, not the original Image, but the Image resulting from recombination R + G + B.

  For this image to 1024 x 768 pixels, decomposition and display three color plans updated to (I estimate here) 100 times per second.  When using the gray scales, it was about 20 times faster (note that color requires make first of all the gray scale, as well as each resulting image R, G and B requires 4 bytes instead of 1 byte per pixel).

  Here is the front - note that the blue channel has almost nothing except 'sky', while the reddish rocks are particularly acute in the red channel.

  

  Bob Schor

• How to create a color image optimized vectors R, G and B IMAQ?

  Hello everyone, I have the R, G and B elements of an image RGB contained in three different vectors.

  I currently use the program as an attachment to get the color in IMAQ image.

  This program works perfectly, but I want a faster program without two nested loops.

  Is there a better solution in IMAQ?

  Best regards

  Max

  

  Perhaps you prefer to run 3 x IMAQ Replace Color Plane.

  I prefer - you have the layers of color in their native table 2D U8 form - using the LabVIEW join (because of the speed and wiring less) and write the resulting 2D table of the 32 in the image.  Performance is excellent - especially when the highlighting of the execution.

  If anyone has a better implementation: I'm interested in it.

• working with color images

  Hello

  I am stuck on this program, I can't seem to understand.

  can someone guide me in the right direction please.

  I did this program, and it is properly take a reference image and other images rotated and attract crosshair while the images are shot.

  It works.

  but when I put a COLOR image instead of the image in grayscale. It does not work. It gives me the error.

  can someone help me with this please

  I have to build the vision of this script Wizard

  

  It seems to work with grayscale images and not the COLOR PHOTOS.

  What can I do to make this work?

  I need to work with images like this and I have to call reticle around the BLACK POINT on the left corner.

  

  I also have a sample VI created vision Assistant?

  In the wizard of vision follow this

  

  

  This, if your original image is a RGB one.

• HP vs15 went white and suddenly lost the loyalty of color

  My HP vs15 suddenly lost the color fidelity.  Now I'm stuck with bright white in places with no contrast and images not nice saturated colours.  I watched a movie and at the end, the monitor came to this disappointing State prior to this installation, things were perfect.

  Interestingly, when I push the "auto" button on the monitor things return to normal until the last stage of this process that makes whites too white and destroyed the fidelity of colors and contrasts,

  Mires and other look perfect when played on the screen even now.  Current usage, text and lines on a white background are weak or none existently readable.

  Is it possible to cancel this last step in the process of "auto" or to restore an excellent color fidelity my past?

  (The graphics card is a Geforce 615o BIOS 5.51.28.39.24)

  Thanks in advance.

  Michael Carakatsane

  The solution was that the free parameters of the GeForce graphics card had been changed by some software.  Locate these commands in the software taking in charge the card affected and corrects the image on the monitor.  I had to adjust the contrast and brightness of the graphics card.  With that, the color fidelity and the readablity of elements in the white area had returned to the normal.