Windows MovieMaker or Windows DVD maker problems
I did a film with clips in MM and all is well. However, when I publish on DVD, it save the project and opens in the creation of DVD. It starts encoding, gets to 2.5% and stays there forever (overnight).
If I try to publish the movie on the computer, it goes to the screen 'Édition Movie' and never moves from 0%.
I literally spent about 20 hours. try to make a film of 40 min. of school my son concert.
Should I forget MS product and buy software that works?
Hi c1tobor,
This issue could be due to present video filters on the computer.
I suggest you try the following steps:
Step 1: Disable filters in windows movie maker:
Director of open windows
1. click on Toolsand then click Options.
2. click on the compatibility tab.
3. to turn off a filter, clear the check box next to the name of the video filter.
Now check if the problem is resolved.
Video-filters-in-Windows-Movie-Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/video-filters-in-Windows-Movie-Maker-frequently-asked-questions
Step 2: Choose a low quality or file SETTING when you publish your movie. For more information, see the movie settings: frequently asked questions.
For more information, see the following links:
Solve problems with publishing a movie to your computer
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer
Solve problems with publishing a movie to a recordable CD
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-a-recordable-CD
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Windows dvd maker problem: I hear but not image using windows DVD maker.
I can hear but not image using windows DVD maker. A few obvious reasons? It's strange because it used to work and now a few months later it does not. The image is there in the start menu of the main menu, just before you press play it starts to play sound with no photos after I press play. Please help, steve gratefully.
original title:
Windows dvd maker problemMaybe the part "What to do if you have questions" of the following
article would offer some ideas.How to burn DVDs with Windows DVD Maker
http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker -
whenever I try to make a dvd with DVD maker, windows stops the program suddenly after adding video files and click Next. This happens every time that I'm unable to burn the dvd
The message appears as follows:
Windows DVD Maker has stopped working
A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.Can anyone suggest a solution?
Hi Bindu Prasad,
Create DVD Windows stops working due to incompatibility with one or several codec files that are obsolete or incompatible with the project or the DVD Maker software itself.
(Obsolete or incompatible) Codec files must be located and renamed to resolve the issue.
1. open the start menu and type event viewer in the start menu search bar. Open event viewer from the menu.
2. in the case of Viewer click Windows logs in the left panel
3. click on application under Windows Logs logs
4. search for the error messages listed in the event viewer window Central Panel and double-click on the error to check if it log is linked to the creation of DVD.Example of error log:
Signature of the problem
Problem event name: APPCRASH
Application name: DVDMaker.exe
Application version: 6.0.6000.16386
Application timestamp: 4549b5b0
Fault Module name: nevideohd.ax
Fault Module Version: 4.6.15.0
Timestamp of Module error: 459bb828
Exception code: c0000005
Exception offset: 00008b 89
OS version: 6.0.6000.2.0.0.256.1
Locale ID: 10625 locate the name of the Module of fault, it must be a file with the extension. CXL
6 once identified the name of the file, try to locate the file in the C:/Windows/System32 folder.(Please click on view the content if the files do not appear automatically).
7. If the files are not listed in the System32 folder, find the file with search containing the files and system files.
8 find the file and rename it.
9. check if the problem persists. If the problem persists and the error message appears again, find the new file which is the origin of the problem of event, error log viewer.-Can also uninstall any third party burning programs and software codec that these could cause the error.
Kind regards
KarthiK TP
-
Not able to add music downloaded to Windows DVD maker slide show
Music Windows DVD Maker problems
Cannot get my downloaded music to be recognised by Windows DVD Maker, when I try to add to the slideshow. Sample music (which came preloaded with the computer) is the only music he recognizes when I go to add music. I guess it's a problem of recognition of format, but I don't know how to download in a format that will work.
Cannot get my downloaded music to be recognised by Windows DVD Maker, when I try to add to the slideshow. Sample music (which came preloaded with the computer) is the only music he recognizes when I go to add music. I guess it's a problem of recognition of format, but I don't know how to download in a format that will work.
==========================================
Might be worth trying to convert your music files to the
format .wma before importing in creation of DVD.There are to many free converters available on the net...
download from Koyotesoft is an example:(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Koyotesoft "Free MP3 WMA Converter".
http://www.koyotesoft.com/indexEn.html
(FWIW if you install the converter, you can uncheck
offerings from Yahoo and Dealio) (also... you can uncheck
the CD Ripper and Easy MP3 Cutter)After installing the program... open and drag and drop
your audio files on the main screen...Choose a backup folder (path of output). Or just leave...
"Save to the directory the file" checked and the new
files will be saved in the folder with the current files.Choose a format...
Left, click Convert.
Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
After burning a dvd, the audio is a fraction of a second offshore on playback of dvd-video.
Hello
I suggest you to refer to this link and check if it helps:
Check if that helps.
-
Problem with Windows DVD maker, Windows Vista Help
I work with windows vista movie maker and dvd maker programs. The premiere of the film looks fine, however, after successfully burn on a DVD - R disc, the selections of chapter on the display of pages 2 and 3 for a few seconds, then the screen goes black for a few seconds, then returns to the chapter selections. How can I solve this problem? Thank you
Wow! It is a large complex/project... more
systems would never be able to make that
in a DVD.It is possible that uncheck the filters would be
improve the question...See the section "what to do if you have questions.
in the following article.How to burn DVDs with Windows DVD Maker
http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-MakerI'm guessing that you are under Vista Movie Maker 6?
The only new version would be Windows Live
Movie Maker and I think most users would
not to call it an 'Upgrade '.Personally, I suggest making small
projects, or even a first part and a second part on
two DVD.If you save your Movie Maker projects to DV - AVI
format and when you import within the limit of the DVD Maker
the total duration of about 1 hour for DVD
You can have the best video quality.See you soon.
-
Windows DVD Maker: Major problem.
It encode my videos up to a certain percentage, then it freezes (at 19.7%) for the countless hours why? and my videos are just 45 minutes long and the music are 1 min. long, burning at slow speed and there is no error message. Thank you.
First, disable video filters, see the following article:
How to burn DVDs with Windows DVD Maker
http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
(scroll down for...) What to do in case of problems)Failure to help... you can have one or more incompatible
or corrupt files in your project source. -
Problem creating Windows DVD? Or Windows Movie Maker problem?
Hello! I created a slide show in Windows Movie Maker, which plays on my computer without problem. Now, I try to burn it to a DVD by using the Windows DVD authoring application. I was able to burn my DVDs sucessfully using the wizard and when I put it in the DVD player I get the main menu I created.
I press play and start my video, but he plays 16 seconds and everything goes black. Time continues to roll until the full 3 minutes are up, but I have 16 seconds of my film. I burned 3 DVD and it did the same thing.
Can someone help me with what I'm doing wrong?
Hi Khsb14,
Have a. you been able to watch the video before burning?
B. did burn the DVD?
C. is the DVD burner connected properly
D. is the audio work after the 16th s?
E. do you have a mistake when he went to the black screen?
This could be a problem with the burner DVD or the method of engraving. Try the following methods.
Method 1
Previewing your DVD, you can view the photos and videos on this subject. Check if the full video is seen in the preview. This can help you determine if you want to make changes to the DVD before burning the disc.
- In the ready to burn DVD page, click Preview.
- To read the DVD preview, click play in the control screen.
- To control the playback, click Pause , play , previous chapter or next chapter , according to what you want to do.
- To display the DVD menu, click Menu. Click on the top, bottom, right, or arrows left to go in this direction on the DVD menu preview, and then click the Enter button to play the selected menu item. Click OK when you are done previewing the DVD.
Check the link for more information.
http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
Method 3
Choose a speed slower burn to your DVD recorder as follows:
- Return to the Add pictures and video to the DVD page and then click on Options.
- In the DVD burning speed box, select medium or slow.
I hope this helps.
Bindu S - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think -
DVD maker problem in windows 8
you plan to fix the dvd maker problem in windows 8 or simply that it is?
CD dvd does not automatically load
http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/CD-DVD-does-not-auto-load/db717677-5de9-418e-a5d3-d8044a347521Creation of DVD Windows in Windows 8!
http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-pictures/Windows-DVD-Maker-in-Windows-8/699c5cc8-0578-4967-BEAB-9a5b14431d6d -
Problem with Windows DVD Maker
I created my pictures in Windows Movie Maker with a title page for each project. When I created a dvd in Windows DVD Maker, box scenes passes the text to the images in the project. Is there anyway to put the dvd up to display the text only for the scenes but not images during playback. I don't want to see the images, just the title of the scene. Thanks for any help you can give.
Hi Donna 51 t.
When the video starts to play, he will continue to play along.
You must manually to pause the video to stop it.
I hope this helps!
Halima S - Microsoft technical support.
-
Video problem Windows DVD Maker
When you use Windows DVD Maker, my videos from my digital camera does not show when I add them to my DVD project. The videos are present and identified with "edges of the film" in my library of images on my computer. However, I don't see them in the DVD machine program. All photos are available when I click on 'Add' in the creation of DVD - just not video clips. At the top of the screen, it says "add images and videos. How can I get my videos are available to burn to DVD slide show with my photos from digital cameras. Thank you!! Luci
Hello friend. Please make sure that your digital camera videos are compatible with the creation of windows dvd. As I know, windows dvd maker supports avi and wmv video. But most camera records videos in mov format. You must convert the camera video to the right format for adding in creation of windows dvd. And here's a guide will show you how to convert videos.
-
Not possible to burn a DVD on the Satellite A100-338 using Windows DVD Maker
I have a Toshiba Satellite A100. I'm trying to burn a DVD using Microsoft Windows DVD Maker and a Sony DVD - RW. The laptop has a carpet * a DVD-RAM UJ-850 s ATA device.
When I try to burn a DVD, a progress bar appears and is about 2% before the hanging.
I also tried to format the DVD first, and which is progressing well before coming up with an error message saying that the drive could not be formatted.
Anyone got any ideas? Am I missing something completely obvious?
Hello
the following things could probably help you with your problem:
-> control if a new BIOS for your machine and a new FIRMWARE update for your DVD player are available. Update the BIOS and the player firnware
-> use another applications burning like Nero, CDBurnerXP or other thing that is usually know work well with almost all DVD - RW readers out there
-> use a DIFFERENT brands of DVD media because the carpet * a readers are really pickyIf all these steps fail, then it is possible that your drive is defective and must be replaced.
See you soon
-
How can I get the clips in record full-time instead of 25 seconds (that they seem to be defined) using windows DVD maker
Hi LorraineDawson,
Here's a walkthough troubleshooting on this issue:
hope this helps
B Eddie
-
Windows DVD Maker will not accept video files
Hello
I used Windows dvd Maker in the past to convert and burn avi files to a dvd that can be played in my dvd player. Today when I inserted a video avi in DVD Maker I get the following message:
"0 files have been added. 1 file could not be added. The C:\User\Public\Video\Alien.avi file is invalid or damaged
I tried to import 10 + videos Dvd Maker and got the same message for them all.
My OS is Vista
Thank you.
Hello
I used Windows dvd Maker in the past to convert and burn avi files to a dvd that can be played in my dvd player. Today when I inserted a video avi in DVD Maker I get the following message:
"0 files have been added. 1 file could not be added. The C:\User\Public\Video\Alien.avi file is invalid or damaged
I tried to import 10 + videos Dvd Maker and got the same message for them all.
My OS is Vista
Thank you.
If you don't mind a liitle experience...
Choose one of your avi files, use a video converter, change it to WMV format.
Add the WMV to dvd creation. He accept?For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
Good then it's perhaps insoluble, but I can find more Windows DVD Maker on my computer. When I open the start menu and select all programs, it's not here. Is it possible to uninstall this program? If I managed to do is there any way I can restore it on my computer?
Hello xDUngeoNMastERx,
Thank you for visiting the website of Microsoft Windows Vista Community.
Windows DVD creation is located in %ProgramFiles%\Movie Maker\DVDMaker.exe. You should be able to create a shortcut icon and place it in the start menu. If this isn't the case, then I suggest you do a restore of the system to date, the program has been lost.
This should answer your question or solve your problem.
I hope the information is useful.
Kind regards
Anthony
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Default value of width of column in the finder
For Finder column, the column in a new window widths are often too narrow and I have to resize to display the full name of each file. is there a way to change the default column width?
-
Satellite P750-114 - display driver stopped responding
Hi, I played a called game football coach and all of a sudden I got this message that brought me to the desktop."display driver has stopped respinding and got" "NVIDIA Windows Kernel Mode Driver display driver, Version 2.67.44 no longer and was retri
-
Audio crackling AFTER COMPUTER is SITTING a certain TIME.
Ok. What happened with my FOUR last macblooks and 3 different audio interfaces. Everything works fine for about a half hour or IF I leave the computer for an hour, I get cracks and pop which only go away if I left Mainstage and revive! Someone at - i
-
UAC Patcher with limited user account
I am referring to a section of documentation: 'Control (UAC) correction (Windows) user accounts' located at http://msdn.Microsoft.com/en-us/library/Windows/desktop/aa372388%28V=vs.85%29.aspx I am interested especially in the part: "If the application
-
for PowerPoint 2003 security update will not install the kb969615 error code 0 x 4397
HAVE NOT BEEN ABLE TO INSTALL MORE THAN ONE YEAR. HAVE RUN REPAIR WINDOWS UPDATE MADE CORRECTIONS, BUT DID NOT ALLOW THE INSTALLATION OF UPDATE.