LACP SG200 - 08 double speed ethernet when two aggregation of links Mac it

Similar Questions

• How can I get my Apple TV to use ethernet when it is also connected to WiFi?

  I have my Apple TV 4 connected by WiFi and ethernet. I want to assure you that it uses the ethernet connection, it will be faster, but when I go to the network settings on the TV, I see only the symbol of WiFi and my WiFi network name. If my Apple TV do not use ethernet, I might as well unplug the ethernet cable. How can I get my Apple TV to use ethernet when it is also connected to WiFi? To automatically use the ethernet connection? Is there a way to disable the WiFi connection?

  To use the ethernet connection, connect it.  To use the WiFi, you can access the network.  I bet the two being connected, it will choose the Wi - Fi just out of logic.

  If you want to use ethernet, disconnect the WiFi.

• funny behaving USB mouse: doing double click even when I press only once

  my mouse behaves funny recently: pretty much whenever I do a click, the result is a double click. When I press for one second and then release the mouse button, I often still get (not) the disiredc simple click... it's on windows, all programs.

  Windows XP, SP3, all installed updates
  Mouse USB (no name)
  my PC has 4 ports USB 1.1 on the integrated controller, I installed a USB 2 control with still 4 ports a year.

  I tried different settings of the mouse (click on the gear, etc.): same problem
  I plugged another mouse (newly purchased): same problem
  I plugged the mouse in all USB ports: same problem
  I plugged the mouse via a USB/PS-2 PS/2 adapter: same problem
  I started a Linux system: same problem
  My scanner (USB; Canon) begins behaving irregulars as weel: during a scan, it constantly stops and then restarts...

  Should I assume that some conflicts between the two USB adapters, as shown in the eroor with a different OS as well?

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message when you use the Scanner?

  Method 1:

  See the article and try to run the fix it:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  I suggest you to update mouse drivers and scan and check if it helps:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Method 3:

  I suggest you to disable and re-enable the USB controllers:

  a. click Startand then click run.

  b. type devmgmt.msc, and then click OK. Device Manager opens.

  c. expand Bus USB controllers.
  Note: You need to scroll the list to find this point.

  d. right-click the first USB controller under USB Bus controllersand then click Uninstall to remove it.

  e. Repeat step 4 for each USB controller is listed under Bus USB controllers.

  Note: restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

• images pp right interprate, but gives an overview on double speed regardless of the format

  Hello

  Thank YOU for trying to help out me!

  When I play something in first pro (mediabrowser or preview window) I'm getting messed up audio and images of delay at double speed.

  It's just the 'standard' speed, so if I hit j it plays back at double speed.

  I am running Windows 7 64 bit with Premiere Pro CC 2015 on

  i2500k @3, 3 Ghz

  GTX 670 Windfrorce

  8 GB at 1333 Mhz RAM

  My Graphicscarddriver is up to date.

  I just reinstalled Windows and all this week, before everything worked flawlessly.

  
  My original file is saved on a 1200D .mov Canon with 50 fps which I converted to DNxHD for better editing.

  It is probably not a problem with the files because both play fine in Windows Media Player and VLC Player and I tried some old images of the same camera.

  As the first edition since the relocation, I guess it's a question of first.

  Any ideas?

  Thank you guys for the advice!

  given that it is a USB headset he brings his own sound card, integrated sound card is Realtek but not used for Adobe.
  After you have installed the driver for the USB soundcard on the helmet, everything works, but I do not understand how the problem is related to the audiodrivers.

  Thank you very much for your quick response, finally I can get back to work

• Why my reading plays at double speed by default in first pro CC2015

  While I am doing a project at PP, my reading screen will double speed, even with manual slow keys, it is not smooth. I tried to reinstall PP nothing helps. I also had remote Adobe support in my PC only for them to fail and finish the session abruptly. Help, please

  ch05en,

  Yes, it could be a video codec problem, but have you checked your audio settings in first? There seems to be a problem with the first audio playback at speeds appropriate when these are not set correctly, also, there is no rub smooth as well.

  I don't know if you have an ASIO driver or what, but it's something to look at. Mine did exactly the thing until I put it for the correct driver according to the audio hardware preferences.

  Just a thought.

• Double speed playback, normal site - possible?

  Before that I have to present this as a feature request, I thought I would ask if this is already possible.

  When I press 'L' twice so that in my calendar, my video play douible speed.  This is useful for examining what said a presenter, but it is difficult to decipher the words with the field went up an octave.  Is it possible to play the video at double speed, but maintain the normal height?  How about reading at a fraction of the double, say, 150% speed?

  J. D.

  Is it possible to play the video at double speed, but maintain the normal height?  How about reading at a fraction of the double, say, 150% speed?

  Not that I am aware of. Yes; Try shift + L (for the play of forwards) and SHIFT + J (for reverse playback). Start playback with L and then press SHIFT + L; that should increase the speed in 25% increments, and you get a number of steps before it at the top of. You can do it from a paused state, also good and fractional get more slow-as-reading in real time - which is very useful, as well.

• How to choose the display by default when you use two screens on my Mac Pro?

  How to choose the display by default when you use two screens on my Mac Pro?

  The default view when you have several is made that you drag the little icon in the menu bar in this pane:

  

  .

• my modem STC (Saudi Arabia) SAGEM 007 has 4 ethernet ports. two of them do not work. (in red)

  my modem STC (Saudi Arabia) SAGEM 007 has 4 ethernet ports. two of them do not work. (in red)

  Hello

  You should check with the help of the manufacturer modem and if it is provided by your ISP support.

  Not really a Windows problem.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Where can I activate the sign (the small white triangle) that comes when two clips are in contact with exactly in the timeline?

  WO reaktiviert man das indication (zwei kleine Weiße Dreiecke), das aufleuchtet, wenn zwei auf der timeline exactly zusammenkommen Clips. Hat Bisher're immer works, aber seit yesterday tut are das nicht mehr. Was muss ich verstellen?

  Where can I activate the sign (the small white triangle) that comes when two clips are in contact with exactly in the timeline?

  Hi Burkhart,

  Where the character (two small white triangles) that lights up when two clips on the timeline exactly meet reactivate them. So far, he has always worked, but since yesterday, it is no longer made. Should I settle?

  Where can I activate the sign (the small white triangle) that comes when two clips are in contact with exactly in the timeline?

  Microsoft® translator translator

  Looks like you have not snapping turned on. Click on the snap-snap-in icon, or press S to allow him once more. Works now?

  Thank you
  Kevin

• When I run firefox v42 mac, the Preferences tab load as well

  When I run Firefox version Mac 42 on Mountain Lion, my homepage loads perfectly, but another 'Préférences' tab always seems to load as well. How can I stop this other tab from loading? Thank you, Ken.

  Hi Ken, one of the possible reasons are if the preferences page has been added as a second 'Home tab' in which case it will be displayed in each new window (Cmd + n) and every time that you click the Home button.

  To verify that you can use the preferences, the general Board, the section to start page, as described in this article: start-up, homepage, tabs and download settings.

  In the area of the Home Page, look for a vertical bar separating two addresses of character. A simple example with short URLS:

  https://www.mozilla.org/|about:preferences
  

  The bar certainly can be hard to spot with long URLs, but when you find it, delete everything to the right of the bar, then the bar itself (I suggest to remove the last bar so things don't accidentally get it together).

  Was she?

• How to manage what programs open when I turn on my Mac

  How to manage what programs open when I turn on my Mac

  System Preferences > users and groups > Login. Unlock the padlock (bottom left), select the item you want to remove, and then click the sign less.

• When I open a link that opens a new Firefox window, it opens 2 tabs instead of one. How can I stop this?

  When I open a link that opens a new Firefox window, it opens 2 tabs instead of one. A tab is the link that I opened and the second tab is just a generic Mozilla tab with links to 12 pages like Facebook, Youtube, etc. This tab opens on top too, so I always have to close to get what I'm looking for. How can I stop this from happening?

  Hello. Thanks for all the posts on this topic. I have the same problem, as described by the op. But, while I use Avast, I have NOT the add-on from Astromenda which has been mentioned. However, I have the SB installed toolbar, and it has been recently updated, 29/12. I suspect that it is the culprit, if this problem is in fact not caused by an update of Firefox (my tiles have recently been reset on new tabs, and I suspect that Firefox for this problem).

  I am ready to remove the toolbar from the SB, but prefer to keep it (Yes, I admit I'm stupid) If this annoying 'new window = 2 tabs with 'new tab' at the top' would just leave.

  Apart from the removal of the toolbar SB... does anyone have suggestions? I don't see that all recently added add-ons/extensions that I don't recognize, apart from the update of the toolbar of SB.

  Updated: 5 minutes after this announcement, I disabled the toolbar of SB and restarted Firefox. No change.

• When you try to check my e-mail acct sync, I get an error message that the URL is not valid. When I check the link, everything that comes is http / / and nothing el

  When I check the link all that shows is http / / and nothing else. She does several times. I use Outlook for Windows 8.1. I have not tried the links embedded to see if this is a universal or just isolated problem to this email in particular.

  You can follow the discussion in the bug.

  • bug 1003082 - check/verification link broken in emails for confirming registration accountant Firefox sync if reading mail in Outlook

  Please, do not comment in bug reports
  https://Bugzilla.Mozilla.org/page.cgi?id=etiquette.html

• When I open a link from another site Internet ForeFox puts a message at the top of the new link, saying it blocked the website to transfer me to a new

  When I open a link to another Firefox Web site opens a new tab, but puts a high line on the new page saying that Firefox has blocked the site to transfer me to another page.
  I have to press before ALLOW Firefox will open the new page.

  How can I solve this problem.
  Thanks in advance.

  Hello, CHIANGRAI, apparently your firefox is set to warn you when the websites is you redirecting - so disable, please go to firefox > options > advanced > general and uncheck the box "warn me when websites try to redirect or reload the page.

• When I create a link in WordPress it will not open the link in a new window

  Hello
  I've been creating websites in WordPress for a few years and still today, I find that when I create a link to open it in a new window using Firefox as browser the link just opens again the same page

  This is the code: -.
  "< a title ="learn more"href ="http://socialmediatrainingjob.info/mainsq"target ="_blank"> here < /a > to find out"

  "< a title ="more"href ="http://socialmediatrainingjob.info/mainsq"> fred."

  The 'fred' link will go on the site that you want, but "find it out here" is going nowhere.

  These links behave as they shoul when I use Internet Explorer and Chrome

  Any ideas how to fix this for Firefox, my version is 17.0.1

  Concerning
  Allan

  Hello

  Thanks Jscher it waqs a add on called 'Adblock Plus 2.2.1' as soon as it was turned off everything was back to normal. Just to prove it I active re and the problem comes back. So I completely removed.
  Funny, is that I never actually installed it in the first place

  Thanks for the correction of a problem tips

  Concerning
  Allan