LAN connectivity turns off completely (patches after XP Reinstall :-()

Similar Questions

• Satellite P30 seems to completely charge the battery only when the unit is turned off completely

  Hi, I have my Toshiba Satellite p30 and only works on battery. This unit operate on sector or only on the battery as after the period of time go down the warning, then closes. The orange light fades in and out, but seems that it will only fully charge when the unit is turned off completely.

  I only just received this unit so bit of a novice.

  MASH

  Hello

  normally, the battery should always charge until it is full when the power is connected.
  If you have an orange light flashes, it means that something is wrong. Maybe your battery is faulty or something else. This should be checked by a technician.

  Good bye

• When you download torrentz my internet connection turn off

  When you download torrentz my internet connection turn off?

  Hello
  • This happens with this particular site?
  • What were the changes made before the show?
  • What browser do you use?
  You can view these methods:
  Method 1:
  I suggest you to disable any program of security on your computer and check if it solves the problem.
  After reviewing the question you must reactivate the security on your computer program.
   
  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
   
  Method 2:
  You can also check this link:
  Tips for solving problems when Internet Explorer hangs or stops working
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-Explorer
   
  Note: It implies also on Windows XP.

• C50-A-1HF satellite will turn off by itself after 2 seconds

  Hello

  the laptop turns off by itself after 2 seconds when I turn it on. This happens if I shutted down or choosed hibernate before (Win8.1).

  This means hibernation is not at all useable.

  The next time I turn it on it works quite normal! Sleep mode works as well. Standby mode it is ready for use after open them both as a repetitive. Fascinating!

  I looked on all the settings of the BIOS, but I found nothing what could be the reason for this behavior.

  Perhaps there is a correlation with another strange behavior. The battery will not be charged over 80%. I do not use the green mode. I have to turn off the laptop and remove the battery completely for a minute. After inserting and booting Win8.1 what it charges again at 100%.

  The discharge time is approximately 3.5 hours. Otherwise, the battery is ok.

  But after the next discharge up to 10% charge that up to 80% more.

  These two effects are not normal. But I don't think (or better, I hope) that there is a material defect.

  Is there a chance does not post the laptop to a repair service?

  Best regards

  Onurbi

  Hey man it are so strange problems and it's not easy to say what to do. All you can do is to install the original recovery image and test with the settings once more, of course without changing anything or install updates or additional applications.

  If possible to do this and test it for a while.
  > Is there a chance does not post the laptop to a repair service?
  As you probably know your possibilities to do something about this are very limited and if there is permanent problem I think you should contact the closest service Toshiba and clarify all of this.
  You have the new laptop model and it should work properly. If you are not happy and there are service problems Toshiba should take are about it and help you.

• How can I turn off the laptop after restoring it to factory settings?

  Hello everyone

  I'm selling my Portege R830-10 q If I want to restore it to the settings to factory (out-of-box state) AND THEN TURN IT OFF.

  I brought the laptop to factory settings successfully using the _TOSHIBA recovery Wizard_ and choosing * factory default software recovery (Recover State out-of-box) *. However, at the end of the process of recovery and after everything is back in place I was not able to TURN off the POWER to the laptop. It only gave me the option to restart. After rephrasing it, the Windows installation process starts.

  I don't want to install Windows, i.e. language, keyboard, user account, etc. I want to leave the Windows installation for the person buying the laptop to me. How can I turn off the laptop after the recovery of the system without having to install Windows?

  I would appreciate your help.

  Concerning

  Pedro

  When the recovery process is complete and you are prompted for a reboot just press start button / stop and turn it off. I think it's only thing you can do.

  Anyway, why not start Windows and go through the configuration option. New owner can modify this basic anyway parameters. As username Admin and language and the keyboard can be set as default.

  For example, if you have a picture of German recovery set to German. New owner can change in any case.

• Spoolsv.exe has 99% of the cpu when I turned off the printer after printing.

  Original title: spoolsv.

  I recently installed a new printer Lexmark Pro715.  Everything works fine, no problems with printing, but as soon as I put off the printer after printing, spoolsv.exe takes 99% CPU.  If I leave the printer in mode 'sleep', the problem is, but I do not often print, I prefer to turn off completely.  There is nothing in the print queue, everything else seems normal.  I can use the Task Manager to stop it, but this isn't a good solution in the long term.  I run MS Update and uninstalled and reinstalled the printer, with no effect.  It's driving me crazy.  I have Windows XP Home Edition SP3.

  From what I've read on the Internet about the print spooler using 99 to 100%, Norton is also sometimes involved as a contributing factor to a runaway print spooler for some people (where my request).

  IIRC, people would set their Norton to start a scan and when it was made, the print spooler has run amok at 100%:

  "Because I have Norton Antivirus, do a system scan every Friday night that I happened to see that the value SPOOLSV. EXE is using almost 100% of the CPU of the morning Saturday. It's the only time that it happens, so I simply stop the process in the SERVICES window, and life is good. I don't know why Norton Antivirus it triggers during the scanning process that I couldn't find anything on the Symantec relating to this site. »

  If the problem resurfaces surface, using abduction special tools on their website, you can uninstall your Norton and view the appearance of things without him - you can always reinstall again once, right?

  I disagree with Norton in general for its CPU and memory hogging and known interference with other XP processes (such as the restoration of the system), so I'd keep which in mind if the problem returns.

  A few years ago, I used to like Norton correct, but will never go back or recommend it.  Microsoft Security Essentials with it's lower overhead and footprint and some regular on the analyses at the request of the MBAM and SAS should hold your own system based on your surfing habits.  Your system will reward you with an improvement in the overall performance of the system as well.

  I can tell you that no single AV tool seems to know everyting so it is safe to use several respectable scanning tools.  Norton certainly doesn't know everything.

• The windows of the bar of Windows are already a form of tabs, so I need them in Firefox. How can I turn off completely from the 23 of Firefox?

  RE: TABS ARE WINDOWS!
  The windows bar already functions as a tab bar. These tabs are called "windows". So, I find windows superfluous Firefox tab. How can I turn off completely from the 23 of Firefox? I don't need to what are essentially the bars of TWO Windows covering the entire width of the image of my screen! I already have a Windows bar at the bottom of my screen, and if I really wanted to, I could change ITS position towards the top of the screen, so that it would LOOK at the windows of Firefox tabs bar. Firefox TABS are, essentially, a SECOND bar Windows superfluous.

  Here are my reasons why I prefer to use Mozilla's Firefox, Microsoft Internet Explorer or Google Chrome. I love and admire Firefox intended to Mozilla on good security for Personas Firefox Add-on and for free use of Firefox in the Add on Ad-Block, which, as you know, has the merit of separate to reduce the size of the screen - the last is my reason for wanting to get rid of "windows" Firefox SUPERFLUOUS tabs bar. I'm terribly sick companies forcing bars (most representative of marketing campaigns, trying to sell me something) in my browser (and in my throat) whenever I download something. (In case you haven't guessed, I have deliberately talking about your bar of Firefox tabs as a '' windows' tabs Firefox bar', because the TABS are WINDOWS!)

  You can also have an addon to open new tabs in a new window.

  • https://addons.Mozilla.org/en-us/Firefox/addon/tab-to-window/?src=search

• HP Pavilion 15 p150nh: laptop does not turn off completely

  Hello!

  I have a laptop HP Pavilion p150nh 15. It does not turn off. If I want to close it will turn off completely. I have black screen but the vens are still on and the buttons start led is also single beds. I've tried everything. Updates, hard reset I was looking for BIOS but nothing.
  Help me please!

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• E4200 can wireless be turned off completely?

  On the E4200 can the wireless turn off completely? I use isn't more than all wireless devices and thought that if I can disable or turn off all wireless capabilities, it may be more secure and run cooler.  Short as... What settings can I use preclude any device wireless access?

  Select network mode "off" for the two bands.

• How to turn off the display after a while without input

  Original title:

  Activate the screensaver mode full-screen.

  Hello

  Windows by default is to disable the screesaver mode when an application runs in fulscreen. I need to enable it. I need to turn off the display after a while without input. So is it possible to do?

  Hello

  Thanks for choosing Microsoft Community to post your question. Windows 7 comes with the power settings using which, you can turn off the display when it is idle for some time.

  Please visit the following links and set the option to turn off the display according to your requirement.

  Sleep and extended: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Power management

  http://Windows.Microsoft.com/en-us/Windows7/products/features/power-management

  Hope that the information provided is useful. Do not respond if you need more help.

• Firewall Windows 7 turns off intermittently, sometimes after WSUS updates

  Firewall Windows 7 turns off intermittently, sometimes after WSUS updates and other times when no updates have been pushed back.  He did 3 days now online this week.  Last week, a day, two weeks before anything.  It's a Dell latitude E6400, with the latest version of the Bios, chipset and device drivers.  Running Office 2010, Visio Pro 2010 and AutoCad 2012, as the main applications.  Any help would be greatly appreciated.

  Thank you

  Michael

  Hi Michael,

  Thanks for the reply.

  You have installed on the computer registry cleaners?

  I suggest you to scan SFC (System File Checker) and check if it helps.

  SFC scan will search the system files corrupted on the computer and replace them.

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
  http://support.Microsoft.com/kb/929833

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.

• My wireless connection turns off randomly and I must turn back each time.

  Original title: my wi - fi connection keeps turning off randomly and I have to reactivate using trouble shoot problems. How can I do to stop turning off by its self?

  I just got this computer today. Connected to my wi - fi, but the internet connection turns off randomly by its self and I always have to use diagnose pushes hard problems do turn back on but it turns off again later and I must do it again repeatively. What should I do?

  Hello

  1. you receive an error message?

  2. What is the brand and model of the computer?

  You can follow the suggestions and check out them.

  Method 1

  You turn off registration for the Wireless Network Adapter.

  a. Click Start.

  (b) in the search box, type Device Manager.

  c. expand network adapters.

  d. right click on the wireless network adapter and select Properties.

  e. uncheck the allow this computer to turn off this device to save power.

  f. click OK.

  Method 2

  You can follow the procedure in the article.

  a. Click Start.

  (b) in the search box, type Device Manager.

  c. expand network adapters.

  d. right click on the wireless network adapter and select Properties.

  e. click on uninstall the tab drivers.

  f. click on apply and OK.

  You can re - install the drivers for the wireless network adapter on the computer manufacturer site.

  Method 3

  You can disable the security software on the computer temporary.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: A firewall and Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  You can also see the article for more information on the issue.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

• Given that the upgrade to Windows 8 my PC turns off without warning after an hour or so.

  Given that the upgrade to Windows 8 my PC turns off without warning after an hour or so. Any ideas?

  My PC is an Asus
  3 GHz Celeron Prosessor
  2 GB of ram

  Hello Kenneth g. Mann

  What version of Windows 8 you have installed on your computer?

  The only thing I can think of that would cause the computer shut down every 2 hours would be if you have the Windows 8 Preview of consumers or the Windows 8 Preview version. These two operating systems were copies of the assessments only and were set to expire on 15 January and 16 January.

  Click the link here , which deals with these issues.

  If you have previews of Windows 8 evaluation, please answer and provide your version of the operating system and any error if set.

  Thank you

  Marilyn

• A Wi - Fi connection turns off on iPad

  Since I've upgraded to iOS 10.0.1, my iPad (model MH312LL/A) with 70 GB of available disk space, turns off the network several times during the day. I checked my router and cable modem and they agree. My other devices, iPhones, a previous version of the iPad and a MacBook, all are still connected to a connection Wi - Fi.

  Wi - Fi power off is especially annoying when I'm watching programs of Xfinity TV or play a game.

  Someone has a similar problem?

  Thank you and best regards,

  John F.

  Hello

  Go into settings and reset the network settings after reset entered your key wireless router.

  Who can help.

  See you soon

  Brian

• HP G62 - b26SL: laptop turning off suddenly. After that, no way to put running, for days.

  Hello. A few days ago, my laptop suddenly off and after that there is no way to do marketing! The button was just clear up for a fraction of a second and then nothing else. I tried to turn it on several times, but not at all, it was all the same. So, I removed the battery and replaced again, but not way: the laptop was dead air! I retried to swich on the next day, but I had exactly the same behavior: a few flashes of the switch, then nothing else. A few days later, to assess, I knew not what, the laptop turned on and it seemed running! Once again, after a few hours of operation, all of a sudden it turned off and no wy to get running. Hystory repeated until yesterday, where at one point he turned on. Now, it seems running, but I don't know until when. What I've done so far, it was just to update the BIOS to the latest available. Then I ran the diagnostic tools, and all was going well run. So I'm a little confused... Does anyone know about a similar behavior? Can anyone help this issue? It may be the last post I write from my laptop. Thanks in advance for your reply and your time. Mario.

  Hi @spream01 ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your laptop HP G62-b26SL and stop. Here is a link on the reduction of the heat. There could be something useful in the fan that blocked such document.

  I recommend to restore the default settings of the BIOS with this document by selecting the reload the default BIOS settings. This will have the BIOS check the connected equipment. If an update has changed the BIOS that it will restore and generally solves all problems.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Have you installed new hardware on the laptop?

  Please let me know how it goes.

  Thank you.