Langer in inches for the new Document in InDesign

Hello

My InDesign somehow just decided to change the unit for documents from inches to points. I did not really points so I want to back to inches but have no problems. I think that the way to change the units for new documents should go into preferences - units and increments and change the H and V units there. My preference for units is already defined as inches. And my rules are shown in inches, too. But, when I open a new Document, it shows me always all units in 'p '. After having this problem, I have updated the InDesign CC yesterday, too, but still having the problem. Can anyone help please? Thank you!

Close all open documents, and that only the value your units in CTRL + K, than stop and open the ID.

Tags: InDesign

Similar Questions

(2008) old iMac 20 inches for the new iMac 21 inch Retina connect

My new iMac 21 inch Retina has just arrived and I discovered that I have no way to transfer the files. I thought the two iMacs had FireWire, but the new iMac has something called Thunderbolt 2 connections on the back. Surely, the Firewire cable will connect NOT together these two Macs. What should I do now?

Use a FireWire 800 adapter Thunderbolt.

(136997)

I installed a hard drive 500 secondary gig, after re-booting the properties for the new drive hard only show 48.8 GB are available.

I installed a hard drive 500 secondary gig, after re-booting the properties for the new drive hard only show 48.8 GB are available. where is the rest of the memory? Its not partitioned to another eather drive

original title: hard drive problems

(1) what does your BIOS the drive size?

============================================================

2) disk hard test - find your make and model:
Speccy - computer/system information in detail
(More detailed look at your memory and CPU)
OS, CPU, RAM, card, graphics, hard drive, optical drive
Audio, peripherals, network.
Note: Option RAM indicates number of slots, DRAM Timing.
Works your memory speed (frequency). The nominal frequency of your memory.
http://www.Piriform.com/Speccy

Test your player - CD Bootable:
Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

================================================================

(3) HD Tune:
Provides information of the car and has an option (tab scan error) to test your drive.
http://www.hdtune.com/

SpeedFan:
Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
It displays your drives model number and compares your drive with other discs of the same brand and model.
http://www.almico.com/SpeedFan.php

-Partition management utilities-

Partition Wizard Home Edition:
http://www.partitionwizard.com/free-partition-manager.html
Note: There is also a CD bootable or versions of the bootable Flash drive:
CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
Among the features and functions: create partition, Delete partition, format partition,.
A partition resize, move partitions, Partition recovery after an accidental deletion,
Convert the partition, partition Explore, Hide partition,
Change the drive letter, a partition active Set, Explorer (content display) of the partition.
Note: To complete any task use the "Pending Operations" box at the bottom left.

Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
EASEUS Partition Master Home Edition (free):
http://www.partition-tool.com/
Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

J W Stuart: http://www.pagestart.com

How about a readme for the new signing of RVS - 4000 IPS: 1.42 in firmware 1.3.2

Hello

How about a readme for the new Signature IPS 1.42 inside the new firmware to version 1.3.2 RVS-4000?

Or am I just too fast and it comes out in a bit?

Thank you

Bruce

Bruce,

You are right. He left this time by mistake. We will solve it. In the meantime, here's what it will be:

RVS4000/WRVS4400N IPS Signature Release Note

Version: 1.42 rules Total: 1097

In this signature, we talked about the exploits/vulnerabilities and applications
as below:

Supported P2P application called BitTorrent up to version 5.0.8.
Supported P2P application named uTorrent up to version 1.7.2.

Version: 1.41 rules Total: 1098

In this signature, we talked about the exploits/vulnerabilities and applications
as below:

-EXPLOIT the MS video control ActiveX Stack Buffer Overflow
A buffer overflow vulnerability exists in Microsoft DirectShow.
The defect is due to the way Microsoft Video ActiveX Control parses image files.
An attacker can convince the user target to open a malicious web page to exploit
This vulnerability.

-EXPLOIT the Injection SQL Oracle database Workspace Manager
Multiple SQL injection vulnerabilities exist in Oracle database server product.
The vulnerabilities are due to inadequate sanitation of input parameters
in the Oracle Workspace Manager component. A remote attacker with user valid
credentials can exploit these vulnerabilities to inject and execute SQL code
with lift is SYS or privilegesof WMSYS.

Supported P2P application named uTorrent up to version 1.7.2.

Content signature for 1.41
========================================================================
Added new signature:
1053635 video MS stack buffer overflow EXPLOIT control ActiveX-1
1053636 video MS stack buffer overflow EXPLOIT control ActiveX-2
1053632 EXPLOIT Oracle database Workspace Manager SQL Injection-1
1053633 EXPLOIT Oracle database Workspace Manager-2 SQL Injection
1053634 EXPLOIT Oracle database Workspace Manager SQL Injection-3

Updated the signature:
1051783 P2P Gnutella Connect
1051212-P2P Gnutella Get file
1051785 P2P Gnutella UDP PING 2
1051997 P2P Gnutella Bearshare with UDP file transfer
1052039 P2P Gnutella OK
Get Foxy P2P file 1052637

Signature removed:
1050521 Worm.Klez.E1 - 1
1050522 Worm.Klez.E1 - 2
1050523 Worm.Klez.E1 - 3
1050524 Worm.Klez.E2 - 1
1050525 Worm.Klez.E2 - 2
1050526 ¡v Worm.Klez.E2 3
1050536 Worm.Blaster.B - 1
1050537 Worm.Blaster.B - 2
1050538 Worm.Blaster.B - 3
1050539 Worm.Blaster.C - 1
1050540 Worm.Blaster.C - 2
1050541 Worm.Blaster.C - 3

Number of rules in each category:
========================================================================
Back/DDoS 51
Buffer overflow: 241
Access control: 92
Scan: 41
Trojan horse: 62
Misc: 3
P2P: 40
Instant Messaging: 121
VRU/worm: 410
Web attacks: 37

Version: 1.40 rules Total: 1091

In this signature, we talked about the exploits/vulnerabilities and applications
as below:

1053406 FEAT MS IE HTML Embed Tag Stack Buffer Overflow (CVE-2008-4261)
An error of border during the processing of a too long file name extension specified
inside a "EMBED" tag can be exploited to cause a stack-based buffer overflow.

1053421 USE MS IE XML Handling Remote Code Execution (CVE-2008-4844)
The vulnerability is due to a use-after-free error when composed
HTML elements are related to the same data source. This can be exploited to
dereference of a pointer released by a specially designed HTML document memory

Version 1.38

In this signature, we addressed the following exploits/vulnerabilities and
applications:

1. support for P2P, BitTorrent and eMule applications.

Version 1.33

In this signature, we addressed the following exploits/vulnerabilities and
applications:

1. support application IM named AIM (http://dashboard.aim.com/aim) until
version 6.5.

2. support application IM called MSN (http://get.live.com/messenger) until
version 8.1.

3 PcShare is a Trojan tool that can remotely administer an attacked computer.

4-CVE-2007-3039: the vulnerability is due to an error of limit in the
Microsoft Message Queuing (MSMQ) service during the treatment of MSMQ messages.
This can be exploited to cause a buffer overflow by sending specially
packages designed for the MSMQ service.

Version 1.32

In this signature, we addressed the following peer-to-peer applications:

1. named IM application PURPOSE up to version 6.5 support.
2. press the request of IM named MSN until version 8.1.

Version 1.31

In this signature, we addressed the following peer-to-peer applications:

1 P2P application called BitTorrent up to version 5.0.8 support.

2. support the P2P application named uTorrent up to version 1.7.2.

Version 1.30

In this version, we have addressed the following vulnerabilities in Microsoft
applications:

1 SUBMISSION-24462: dereference of a pointer Null vulnerability exists in some versions
Microsoft Office. Remote attackers can trick users into visiting a
specially designed web page. The symptom includes a denial of
condition of service for the process in question.

2 Microsoft Security Bulletin MS07-027: Microsoft Windows support
Services NMSA Session Description object ActiveX control does not reach
restrict access to dangerous methods. This vulnerability could allow
a remote attacker to execute arbitrary code on an affected system.

Version 1.29

In this version, we have addressed the following exploits/vulnerabilities and
peer-to-peer applications:

1 Microsoft Security Advisory (935423): there is one based on the stack
in Microsoft Windows buffer overflow. The vulnerability is due
for insufficient format validation when handling incorrect ANI
file cursor or icon. A remote attacker can exploit this
vulnerability of prompting grace target user to visit a malicious
Web site by using Internet Explorer. A successful operation would be
allow the execution of arbitrary code with the privileges of the
currently logged in.

2. support a named QQ instant messaging application blocking until the
2007 Beta1 and Beta2 version.

Version 1.28

In this signature, we address the following exploits/vulnerabilities:

Microsoft Security Bulletin MS07-014: there is a buffer overflow
vulnerability in Microsoft Word. The vulnerability is created due to
a flaw in the Table entry of the Section within the structure of Table data flow.
An attacker could exploit this vulnerability by tricking a user to open
a designed Word file. Exploitation of the vulnerability may result
injection and execution of arbitrary code in the security context
the user target.

Microsoft Security Bulletin MS07-016: there is an alteration of the memory
vulnerability in Microsoft Internet Explorer. The flaw is due to a bad
posting lines of response in the responses from the FTP server. By persuading a user
to visit a malicious website, an attacker could run arbitrary on code
the target system with the privileges of the currently logged in user.

Version 1.26

In this signature, we addressed the following exploits/vulnerabilities:

CVE-2006-5559: there is a memory corruption vulnerability in
the ADODB. Connection ActiveX control in Microsoft Internet Explorer.
The flaw is due to improper validation of the data provided to the
Execute method. By persuading target the user to visit a malicious
Web site, an attacker can cause the application process
to terminate or possibly divert its flow of execution to arbitrary
code.

Version 1.25

In this signature, we addressed the following exploits/vulnerabilities:

Microsoft MS06-070 security bulletin: MS Windows 2000 Workstation
Service (WKSSVC. (DLL) has a remote code execution vulnerability. One
unauthenticated attacker could exploit this vulnerability to run
arbitrary code with the privileges of the level system on Windows 2000 and
Windows XP computers.

Version 1.24

In this signature, we addressed the following exploits/vulnerabilities:

1 Microsoft Data Access Components (MDAC) has a remote code execution
vulnerability in the RDS object. DataSpace ActiveX control. A remote attacker
could create a specially designed and host the malicious file on a
Web site or send it to the victim through e-mail. When the file is opened,
the attacker can run arbitrary code on the victim's system.

2. control WMI Object Broker ActiveX (WmiScriptUtils.dll) in Microsoft
Visual Studio 2005 has a vulnerability that could allow a remote
attacker to execute arbitrary code.

3 Microsoft Internet Explorer has a type of heap buffer overflow vulnerability.
A remote attacker could create a malicious web page containing COM objects
Daxctle.OCX HTML when instantiated as an ActiveX control and the thing the
victim to open the web page. By this attack, the attacker to execute
arbitrary code on the victim's browser.

Version 1.23

In this version, we have addressed the following exploits/vulnerabilities:

The vulnerability lies in some of the engines in Microsoft XML core
Windows. It is the result of the failure of the engine to properly manage the
bad arguments passed to one of the methods associated with the XML
purpose of the request.

Version 1.22

In this version, we discussed the exploits/vulnerabilities as follows:

Vagaa is a P2P that supports the network BitTorrent and eDonkey software.
It can be downloaded from the two network. The software is mainly used in people's Republic of CHINA.
There are some problems with this software because it didn't follow the official eMule Protocol.
The question can be referenced on the wiki (http://en.wikipedia.org/wiki/Vagaa).
Classify us Vagaa as eDonkey2000 program and allow admin users to disable in the user Web interface.

Version: 1.21

In this version, we have addressed vulnerabilities exploits as below:

Microsoft Internet Explorer WebViewFolderIcon has a buffer overflow
Vulnerability. A remote attacker could create a malicious Web page and
trick the victim to open. By this attack, the attacker could cause buffer
Overflow and crash the browser of the victim.

Version: 1.20

In this version, we discussed the exploits/vulnerabilities and applications
as below:

1 foxy is a P2P application that can search and download music and movies.
Foxy follows most public Gnutella P2P protocol but still has its own
signature under certain conditions. After the inclusion of the file Get Foxy P2P
rule, we can perfectly detect and block the Foxy and it will be detected as Gnutella.
Foxy can be blocked by deactivating Gnutella.

2 Microsoft Internet Explorer 6.0 and 6.0SP1 have impaired memory
vulnerability in the ActiveX component. A remote attacker can create a
malicious Web page and trick the victim to open the web page. By this attack.
the attacker could cause the crash of the browser of the victim or to execute arbitrary code.

3 Microsoft Internet Explorer has heap buffer overflow vulnerabilities
Vector Markup Language (VML). A remote attacker can create a malicious Web site
page and the thing the victim to open the web page. By this attack, the attacker
could cause the buffer overflow and execute arbitrary code on the victim's browser.

Version: 1.19

In this version, we have added a rule to meet cross-domain redirect
Microsoft Internet Explorer vulnerability (MS06-042). The vulnerability
is caused by the inappropriate use of URL redirection by the object.documentElement.outer
HTML property. A remote attacker could create a malicious web page and
trick the victim to open the web page. With this attack, the attacker could
run arbitrary code on the victim's browser and get sensitive information.

Version: 1.18

In this version, we have added the 6 rules to facilitate the blocking of QQ, the most
popular instant Messenger in China. There are several versions of QQ on the
official download site. Currently, we can detect and block QQ until the
Version 2006 Sp3 beta 2.

Version: 1.17

In this version, we discussed the exploits/vulnerabilities below:

1. the Server Service in Microsoft Windows 2000 SP4, XP SP1 and SP2, server
2003 and SP1 have a buffer overflow vulnerability. A remote attacker
could exploit a server response designed to cause the buffer overflow and run
arbitrary code on the victim's system.

2 hyperlink Object Library in Microsoft Windows 2000 SP4, XP SP1 and SP2,
Server 2003 and SP1 have a code execution vulnerability. A remote control
attacker could send a malicious Office document containing a
specially designed hyperlink to a victim in an email or host the file on
a web site. When the operator successfully this vulnerability, a remote control
attacker to execute arbitrary code with the privileges of the victim.

3 Microsoft Word XP and Word 2003 have a remote code execution vulnerability.
A remote attacker could host a DOC file on a Web site. If successfully
exploiting this vulnerability, remote attacker could execute arbitrary code
with the privilege of the victim.

Version: 1.16

In this version, we discussed the exploits/vulnerabilities below:

1 Microsoft Excel 2000, XP and 2003 Excel have a remote code execution
vulnerability, due to an error in Excel when incorrect URL handling
channels. A remote attacker could send a malicious .xls file of a victim
in an email or host the file on a web site. When the operator successfully this
vulnerability, a remote attacker to execute arbitrary code with the victim
privileges.

2 hyperlink Object Library in Microsoft Windows 2000 SP4, XP SP1 and SP2,
Server 2003 and SP1 have a code execution vulnerability. A remote control
attacker could send a malicious Office document containing a
specially designed hyperlink to a victim in an email or host the file on
a web site. When the operator successfully this vulnerability, a remote control
attacker to execute arbitrary code with the privileges of the victim.

3 Microsoft Windows XP/NT/2000/2003 have a denial of service vulnerability.
A remote attacker can send a malicious SMB packet causes the victim computers
Crash.

use Image catalog script for the current document

Is it possible to use the script to image catalogue for the current document in which we work instead of leaving the mark of script a new document fees for placed images?

use,

//ImageCatalog.jsx
//An InDesign CS6 JavaScript
/*
@@@BUILDINFO@@@ "ImageCatalog.jsx" 3.0.0 15 December 2009
*/
//Creates an image catalog from the graphic files in a selected folder.
//Each file can be labeled with the file name, and the labels are placed on
//a separate layer and formatted using a paragraph style ("label") you can
//modify to change the appearance of the labels.
//
//For more information on InDesign scripting, go to http://www.adobe.com/products/indesign/scripting/index.html
//Or visit the InDesign Scripting User to User forum at http://www.adobeforums.com .
//
//The myExtensions array contains the extensions of the graphic file types you want
//to include in the catalog. You can remove extensions from or add extensions to this list.
//myExtensions is a global. Mac OS users should also look at the file types in the myFileFilter function.
main();
function main(){
  var myFilteredFiles;
  //Make certain that user interaction (display of dialogs, etc.) is turned on.
  app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;
  myExtensions = [".jpg", ".jpeg", ".eps", ".ps", ".pdf", ".tif", ".tiff", ".gif", ".psd", ".ai"]
  //Display the folder browser.
  var myFolder = Folder.selectDialog("Select the folder containing the images", "");
  //Get the path to the folder containing the files you want to place.
  if(myFolder != null){
  if(File.fs == "Macintosh"){
  myFilteredFiles = myMacOSFileFilter(myFolder);
  }
  else{
  myFilteredFiles = myWinOSFileFilter(myFolder);
  }
  if(myFilteredFiles.length != 0){
  myDisplayDialog(myFilteredFiles, myFolder);
  alert("Done!");
  }
  }
}
//Windows version of the file filter.
function myWinOSFileFilter(myFolder){
  var myFiles = new Array;
  var myFilteredFiles = new Array;
  for(myExtensionCounter = 0; myExtensionCounter < myExtensions.length; myExtensionCounter++){
  myExtension = myExtensions[myExtensionCounter];
        myFiles = myFolder.getFiles("*"+ myExtension);
  if(myFiles.length != 0){
  for(var myFileCounter = 0; myFileCounter < myFiles.length; myFileCounter++){
  myFilteredFiles.push(myFiles[myFileCounter]);
  }
  }
  }
  return myFilteredFiles;
}
function myMacOSFileFilter(myFolder){
  var myFilteredFiles = myFolder.getFiles(myFileFilter);
  return myFilteredFiles;
}
//Mac OS version of file filter
//Have to provide a separate version because not all Mac OS users use file extensions
//and/or file extensions are sometimes hidden by the Finder.
function myFileFilter(myFile){
  var myFileType = myFile.type;
  switch (myFileType){
  case "JPEG":
  case "EPSF":
  case "PICT":
  case "TIFF":
  case "8BPS":
  case "GIFf":
  case "PDF ":
  return true;
  break;
  default:
  for(var myCounter = 0; myCounter-1){
  return true;
  break;
  }
  }
  }
  return false;
}
function myDisplayDialog(myFiles, myFolder){
  var myLabelWidth = 112;
  var myStyleNames = myGetParagraphStyleNames(app);
  var myLayerNames = ["Layer 1", "Labels"];
  var myDialog = app.dialogs.add({name:"Image Catalog"});
  with(myDialog.dialogColumns.add()){
  with(dialogRows.add()){
  staticTexts.add({staticLabel:"Information:"});
  }
  with(borderPanels.add()){
  with(dialogColumns.add()){
  with(dialogRows.add()){
  staticTexts.add({staticLabel:"Source Folder:", minWidth:myLabelWidth});
  staticTexts.add({staticLabel:myFolder.path + "/" + myFolder.name});
  }
  with(dialogRows.add()){
  staticTexts.add({staticLabel:"Number of Images:", minWidth:myLabelWidth});
  staticTexts.add({staticLabel:myFiles.length + ""});
  }
  }
  }
  with(dialogRows.add()){
  staticTexts.add({staticLabel:"Options:"});
  }
  with(borderPanels.add()){
  with(dialogColumns.add()){
  with(dialogRows.add()){
  staticTexts.add({staticLabel:"Number of Rows:", minWidth:myLabelWidth});
  var myNumberOfRowsField = integerEditboxes.add({editValue:3});
  }
  with(dialogRows.add()){
  staticTexts.add({staticLabel:"Number of Columns:", minWidth:myLabelWidth});
  var myNumberOfColumnsField = integerEditboxes.add({editValue:3});
  }
  with(dialogRows.add()){
  staticTexts.add({staticLabel:"Horizontal Offset:", minWidth:myLabelWidth});
  var myHorizontalOffsetField = measurementEditboxes.add({editValue:12, editUnits:MeasurementUnits.points});
  }
  with(dialogRows.add()){
  staticTexts.add({staticLabel:"Vertical Offset:", minWidth:myLabelWidth});
  var myVerticalOffsetField = measurementEditboxes.add({editValue:24, editUnits:MeasurementUnits.points});
  }
  with (dialogRows.add()){
  with(dialogColumns.add()){
  staticTexts.add({staticLabel:"Fitting:", minWidth:myLabelWidth});
  }
  with(dialogColumns.add()){
  var myFitProportionalCheckbox = checkboxControls.add({staticLabel:"Proportional", checkedState:true});
  var myFitCenterContentCheckbox = checkboxControls.add({staticLabel:"Center Content", checkedState:true});
  var myFitFrameToContentCheckbox = checkboxControls.add({staticLabel:"Frame to Content", checkedState:true});
  }
  }
  with(dialogRows.add()){
  var myRemoveEmptyFramesCheckbox = checkboxControls.add({staticLabel:"Remove Empty Frames:", checkedState:true});
  }
  }
  }
  with(dialogRows.add()){
  staticTexts.add({staticLabel:""});
  }
  var myLabelsGroup = enablingGroups.add({staticLabel:"Labels", checkedState:true});
  with (myLabelsGroup){
  with(dialogColumns.add()){
  //Label type
  with(dialogRows.add()){
  with(dialogColumns.add()){
  staticTexts.add({staticLabel:"Label Type:", minWidth:myLabelWidth});
  }
  with(dialogColumns.add()){
  var myLabelTypeDropdown = dropdowns.add({stringList:["File name", "File path", "XMP description", "XMP author"], selectedIndex:0});
  }
  }
  //Text frame height
  with(dialogRows.add()){
  with(dialogColumns.add()){
  staticTexts.add({staticLabel:"Label Height:", minWidth:myLabelWidth});
  }
  with(dialogColumns.add()){
  var myLabelHeightField = measurementEditboxes.add({editValue:24, editUnits:MeasurementUnits.points});
  }
  }
  //Text frame offset
  with(dialogRows.add()){
  with(dialogColumns.add()){
  staticTexts.add({staticLabel:"Label Offset:", minWidth:myLabelWidth});
  }
  with(dialogColumns.add()){
  var myLabelOffsetField = measurementEditboxes.add({editValue:0, editUnits:MeasurementUnits.points});
  }
  }
  //Style to apply
  with(dialogRows.add()){
  with(dialogColumns.add()){
  staticTexts.add({staticLabel:"Label Style:", minWidth:myLabelWidth});
  }
  with(dialogColumns.add()){
  var myLabelStyleDropdown = dropdowns.add({stringList:myStyleNames, selectedIndex:0});
  }
  }
  //Layer
  with(dialogRows.add()){
  with(dialogColumns.add()){
  staticTexts.add({staticLabel:"Layer:", minWidth:myLabelWidth});
  }
  with(dialogColumns.add()){
  var myLayerDropdown = dropdowns.add({stringList:myLayerNames, selectedIndex:0});
  }
  }
  }
  }
        var myResult = myDialog.show();
        if(myResult == true){
  var myNumberOfRows = myNumberOfRowsField.editValue;
  var myNumberOfColumns = myNumberOfColumnsField.editValue;
  var myRemoveEmptyFrames = myRemoveEmptyFramesCheckbox.checkedState;
  var myFitProportional = myFitProportionalCheckbox.checkedState;
  var myFitCenterContent = myFitCenterContentCheckbox.checkedState;
  var myFitFrameToContent = myFitFrameToContentCheckbox.checkedState;
  var myHorizontalOffset = myHorizontalOffsetField.editValue;
  var myVerticalOffset = myVerticalOffsetField.editValue;
  var myMakeLabels = myLabelsGroup.checkedState;
  var myLabelType = myLabelTypeDropdown.selectedIndex;
  var myLabelHeight = myLabelHeightField.editValue;
  var myLabelOffset = myLabelOffsetField.editValue;
  var myLabelStyle = myStyleNames[myLabelStyleDropdown.selectedIndex];
  var myLayerName = myLayerNames[myLayerDropdown.selectedIndex];
  myDialog.destroy();
  myMakeImageCatalog(myFiles, myNumberOfRows, myNumberOfColumns, myRemoveEmptyFrames, myFitProportional, myFitCenterContent, myFitFrameToContent, myHorizontalOffset, myVerticalOffset, myMakeLabels, myLabelType, myLabelHeight, myLabelOffset, myLabelStyle,  myLayerName);
        }
  else{
  myDialog.destroy();
  }
  }
}
function myGetParagraphStyleNames(myDocument){
  var myStyleNames = new Array;
  var myAddLabelStyle = true;
  for(var myCounter = 0; myCounter < myDocument.paragraphStyles.length; myCounter++){
  myStyleNames.push(myDocument.paragraphStyles.item(myCounter).name);
  if (myDocument.paragraphStyles.item(myCounter).name == "Labels"){
  myAddLabelStyle = false;
  }
  }
  if(myAddLabelStyle == true){
  myStyleNames.push("Labels");
  }
  return myStyleNames;
}
function myMakeImageCatalog(myFiles, myNumberOfRows, myNumberOfColumns, myRemoveEmptyFrames, myFitProportional, myFitCenterContent, myFitFrameToContent, myHorizontalOffset, myVerticalOffset, myMakeLabels, myLabelType, myLabelHeight, myLabelOffset, myLabelStyle,  myLayerName){
  var myPage, myFile, myCounter, myX1, myY1, myX2, myY2, myRectangle, myLabelStyle, myLabelLayer;
  var myParagraphStyle, myError;
  var myFramesPerPage = myNumberOfRows * myNumberOfColumns;
  var myDocument = app.activeDocument;
  myDocument.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.points;
  myDocument.viewPreferences.verticalMeasurementUnits = MeasurementUnits.points;
  var myDocumentPreferences = myDocument.documentPreferences;
  var myNumberOfFrames = myFiles.length;
  var myNumberOfPages = Math.round(myNumberOfFrames / myFramesPerPage);
  if ((myNumberOfPages * myFramesPerPage) < myNumberOfFrames){
  myNumberOfPages++;
  }
  //If myMakeLabels is true, then add the label style and layer if they do not already exist.
  if(myMakeLabels == true){
  try{
  myLabelLayer = myDocument.layers.item(myLayerName);
  //if the layer does not exist, trying to get the layer name will cause an error.
  myLabelLayer.name;
  }
  catch (myError){
  myLabelLayer = myDocument.layers.add({name:myLayerName});
  }
  //If the paragraph style does not exist, create it.
  try{
  myParagraphStyle = myDocument.paragraphStyles.item(myLabelStyle);
  myParagraphStyle.name;
  }
  catch(myError){
  myDocument.paragraphStyles.add({name:myLabelStyle});
  }
  }
  myDocumentPreferences.pagesPerDocument = myNumberOfPages;
  myDocumentPreferences.facingPages = false;
  var myPage = myDocument.pages.item(0);
  var myMarginPreferences = myPage.marginPreferences;
  var myLeftMargin = myMarginPreferences.left;
  var myTopMargin = myMarginPreferences.top;
  var myRightMargin = myMarginPreferences.right;
  var myBottomMargin = myMarginPreferences.bottom;
  var myLiveWidth = (myDocumentPreferences.pageWidth - (myLeftMargin + myRightMargin)) + myHorizontalOffset
  var myLiveHeight = myDocumentPreferences.pageHeight - (myTopMargin + myBottomMargin)
  var myColumnWidth = myLiveWidth / myNumberOfColumns
  var myFrameWidth = myColumnWidth - myHorizontalOffset
  var myRowHeight = (myLiveHeight / myNumberOfRows)
  var myFrameHeight = myRowHeight - myVerticalOffset
  var myPages = myDocument.pages;
  // Construct the frames in reverse order. Don't laugh--this will
  // save us time later (when we place the graphics).
  for (myCounter = myDocument.pages.length-1; myCounter >= 0; myCounter--){
  myPage = myPages.item(myCounter);
  for (var myRowCounter = myNumberOfRows; myRowCounter >= 1; myRowCounter--){
  myY1 = myTopMargin + (myRowHeight * (myRowCounter-1));
  myY2 = myY1 + myFrameHeight;
  for (var myColumnCounter = myNumberOfColumns; myColumnCounter >= 1; myColumnCounter--){
  myX1 = myLeftMargin + (myColumnWidth * (myColumnCounter-1));
  myX2 = myX1 + myFrameWidth;
  myRectangle = myPage.rectangles.add(myDocument.layers.item(-1), undefined, undefined, {geometricBounds:[myY1, myX1, myY2, myX2], strokeWeight:0, strokeColor:myDocument.swatches.item("None")});
  }
  }
  }
  // Because we constructed the frames in reverse order, rectangle 1
  // is the first rectangle on page 1, so we can simply iterate through
  // the rectangles, placing a file in each one in turn. myFiles = myFolder.Files;
  for (myCounter = 0; myCounter < myNumberOfFrames; myCounter++){
  myFile = myFiles[myCounter];
  myRectangle = myDocument.rectangles.item(myCounter);
  myRectangle.place(File(myFile));
  myRectangle.label = myFile.fsName.toString();
  //Apply fitting options as specified.
  if(myFitProportional){
  myRectangle.fit(FitOptions.proportionally);
  }
  if(myFitCenterContent){
  myRectangle.fit(FitOptions.centerContent);
  }
  if(myFitFrameToContent){
  myRectangle.fit(FitOptions.frameToContent);
  }
  //Add the label, if necessary.
  if(myMakeLabels == true){
  myAddLabel(myRectangle, myLabelType, myLabelHeight, myLabelOffset, myLabelStyle, myLayerName);
  }
  }
  if (myRemoveEmptyFrames == 1){
  for (var myCounter = myDocument.rectangles.length-1; myCounter >= 0;myCounter--){
  if (myDocument.rectangles.item(myCounter).contentType == ContentType.unassigned){
  myDocument.rectangles.item(myCounter).remove();
  }
  else{
  //As soon as you encounter a rectangle with content, exit the loop.
  break;
  }
  }
  }
}
//Function that adds the label.
function myAddLabel(myFrame, myLabelType, myLabelHeight, myLabelOffset, myLabelStyleName, myLayerName){
  var myDocument = app.documents.item(0);
  var myLabel;
  var myLabelStyle = myDocument.paragraphStyles.item(myLabelStyleName);
  var myLabelLayer = myDocument.layers.item(myLayerName);
  var myLink =myFrame.graphics.item(0).itemLink;
  //Label type defines the text that goes in the label.
  switch(myLabelType){
  //File name
  case 0:
  myLabel = myLink.name;
  break;
  //File path
  case 1:
  myLabel = myLink.filePath;
  break;
  //XMP description
  case 2:
  try{
  myLabel = myLink.linkXmp.description;
  if(myLabel.replace(/^\s*$/gi, "")==""){
  throw myError;
  }
  }
  catch(myError){
  myLabel = "No description available.";
  }
  break;
  //XMP author
  case 3:
  try{
  myLabel = myLink.linkXmp.author
  if(myLabel.replace(/^\s*$/gi, "")==""){
  throw myError;
  }
  }
  catch(myError){
  myLabel = "No author available.";
  }
  break;
  }
  var myX1 = myFrame.geometricBounds[1];
  var myY1 = myFrame.geometricBounds[2] + myLabelOffset;
  var myX2 = myFrame.geometricBounds[3];
  var myY2 = myY1 + myLabelHeight;
  var myTextFrame = myFrame.parent.textFrames.add(myLabelLayer, undefined, undefined,{geometricBounds:[myY1, myX1, myY2, myX2], contents:myLabel});
  myTextFrame.textFramePreferences.firstBaselineOffset = FirstBaseline.leadingOffset;
  myTextFrame.parentStory.texts.item(0).appliedParagraphStyle = myLabelStyle;
}

InDesign CC closes unexpectedly when you create the new document

Hi, my CC Indesign closes unexpectedly whenever I try to create a new document.
Also, it closes when I use the plugin Blurb Indesign, to create the new document or for download from my books - during the pre-flight, she leaves.
I've updated to CC2015. I also re-installed the plugin blurb. These two measures do not seem to work.
- The InDesign file in the cache folder, delete.
- In the preferences/Adobe InDesign / Version 11.0/en_US (or any language folder you see there), locate the InDesign Defaults file and place it on your desktop (this way you can always copy it back if necessary). If there is a file, InDesign SavedData offers also the office.
- Restart InDesign after doing that, fingers crossed it will launch.
- If you are satisfied with the result and don't need your InDesign preferences previous folder (InDesign Defaults), then delete the two files to the desktop computer. I usually keep a copy of them just in case ;-) But 99% of the time that I do not put them back, as clearing caches and prefs seems very often cure the problems.

Cannot write the new document preset file.

I had problems with the installation of the update. I thought that all my apps are up to date, but then I tried to update to After Effects, which may or may not have been installed on this machine (normally I use it on my old machine, but I had to try new features)
So now I get the error update U44M1l210 - don't know I have this correct because I can't tell what the character in the Center is (between the U44M1 and 210)
I tried delete file as recommended in other threads thing, but it seems that all of us who have been in the past months, and I've seen the suggestion on the opening of the Terminal--but I'm not familiar with the Terminal... Tried installing many times, rebooted several times, closed creative cloud repeatedly (is my frustration showing?)
I think that most of my apps are up to date and I had to stop the FIGHT with installation and try to get some WORK.
In any case, I opened Photoshop and things seem to work OK - but then, when I try to close Photoshop I get this Message:
"Unable to write to the new document presets file."
What does that mean? I spent 2 hours and 49 minutes to attempt to update the applications in the creative Cloud.
Yosemite 10.10.4 on a Mac Mini (end 2012) 16 GB of ram
I'm not really a person of whistle, but I'm really frustrated this morning - thank you in advance if you can help me.

Fix possible Mac 10.10.4 (at least for Premiere Pro) https://forums.adobe.com/thread/1891705

10.10 mac. ? sometimes has problems, often related to the 'default' permissions that need to be changed

-solution https://forums.adobe.com/thread/1689788 of a person

- and a Java update https://forums.adobe.com/thread/1507936

-Update may break things https://forums.adobe.com/thread/1772260

-http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/

-https://helpx.adobe.com/x-productkb/global/mac-os-yosemite-compatability.html

Police are not not in the new Document

Microsoft Windows 8 Pro
Adobe Creative Suite CS6
Whenever I create a new Document in InDesign 6 I can't see the police when I insert a text box. For example, when I insert a text box and start typing, it seems that something is happening, but I don't see any text. What seems to be the case, it's that the InDesign, by default, uses the Minion Pro font. When I change the font, such as Arial, then the text appears. Why this is happening and what can I do to fix. Moreover, this is not the case on my MacBook Pro with the Mountain Lion.
Thank you in advance,
Michael

Adobe programs are supposed to find fonts that are in the folder of the system fonts, fonts common Adobe and folder private enforcement policies. I prefer to install all fonts in the system folder, so that they are available to tother so applications.

You can also close all adobe applications, and then find and remove adobefnt*.lst files where the * is a 2-digit number. Leave all that you will find this is not the number to 2 digits and do not delete everything that isn't the .lst extension.

Not able to access sqlplus command-line linux for the new user added
Hi all

We have a strange problem with a new user of linux Redhat , trying to to connect to Oracle 10 g from the command line and would like any suggestions you have.

-other users are able to connect via sqlplus fine to their respective Oracle accounts, both for the new user account.
-I know the user and the password works because we can connect through Oracle SQL Developer from a terminal Windows.

-----

The monitoring of symptoms:

Since terminal linux+:

[user@server]$ sqlplus
Error Initializing SQL 6 * more
SP1 file < lang > .msb not found message
SP2-0750: you may need to set ORACLE_HOME in your Oracle software directory

[user@server]$ echo $ORACLE_HOME
/ opt/oracle/10 g

[user@server]$ echo $ORACLE_SID
~ also define as in other users without db connection problems

[user@server]$ pico * .bash_profile]
~ the value as in other users without db connection problems

[user@server]$ testconnection.pl perl

Series of tests in connection...

ORA_HOME: "/ opt/oracle / 10g.
AMERICAN

DBI connect('local.domain.name','db_username',...) failed: ERROR OCIEnvNlsCreate (check ORACLE_HOME and NLS parameters etc.) to the line /www/testconnection.pl 21
has failed: ERROR OCIEnvNlsCreate (check the ORACLE_HOME and NLS parameters etc).

[user@server]$ pico testconnection.pl

! / usr/bin/perl

Use DBI;

$this_var [0] = "dbi:Oracle:local.domain.name";
$this_var [1] = 'db_username ';
$this_var [2] = 'db_password ';

print 'Test Run of connection...\n\n';
print ' ORA_HOME: '$ENV {ORACLE_HOME}' \n ";
print ' NLS_LANG: '$ENV {NLS_LANG}' \n ";
Print "ORA_NLS: '$ENV {ORA_NLS}' \n ';"
Print "\n\n";

#connect DB
$dbh = DBI-> connect ($this_var [0], $this_var [1] $this_var [2]);
{if ($DBH)}
Print "OK \n";
$dbh-> disconnect;
}
else {}
Print "failed: $DBI: errstr\n";
}

Thanks for your help!
>
[user@server]$ ls - lt /opt/oracle/10g/sqlplus/mesg/sp*.msb
-rw - r - 1 oracle oinstall 31744 Sep 2005 1 /opt/oracle/10g/sqlplus/mesg/sp2us.msb
-rw - r - 1 oracle oinstall 11776 Sep 2005 1 /opt/oracle/10g/sqlplus/mesg/sp1us.msb
>

It seems that if you have a permissions problem. If your username is not a member of the oinstall group, he or she has no access to the necessary sql * more files. I recommend you read MOS 420083.1 Note for a more in-depth discussion to set the file permissions on the Oracle home.

Reformats text? When slipped off-page or pasted into the new document

This is the STRANGEST thing... I have a document in InDesign created by someone else. I intend to use it as 'art of seeds' for another pamphlet, but the text is behaving strangely that I try to move or copy and paste in a new default value of the document.
The text changes when I simply drag (or copy) the text off the page on the pasteboard box. Still pallets character and paragraph, text frame options, etc. report the same settings for all the copies text. I have an image on the screen what happens when I copy and place it off-page. The original text is on the right, paste on the pasteboard on the left. (The vertical black line is on the left page). It seems that paragraph space before/after changed, but according to the pallets, he does not.
IF ANY PART OF THE TEXT BOX IS IN CONTACT WITH THE SAME PAGE PER MILLIMETER, IT SEEMS OK. But if the text box is COMPLETELY on the pasteboard, it changes.
If I stick ON a PAGE in a NEW document by default, spacing increases enormously, and yet if I stick on the pasteboard of the new document even, it looks like text on the left, above.
I tried to remove all THE styles from the paragraph of the original document and replace it with no paragraph Style, retain formatting (styles of characters also deletion) and then work with the text. It's always weird.
It is crucial that I retain the formatting of the original document that I create new based on this, but since the pallets/text of paragraph report all data, I can't... FIXED text. We never saw it?
InDesign CS5 Mac OS 10.6.8. Suitcase Fusion 14.0.6 Video Software using, who reported no problems when documents have been opened and on what appear to be the correct fonts. Just in case, I have manually activated ALL our versions of Futura, which made no difference when I have opened the document. (I did what is obvious as the reboot and clear the caches of fonts).
Everyone has already seen something like that?

I think you will find that the text is printed to snap to grid. Which is defined, what (and in the case of the first illustration, space or space before after) are the minimum distances between the lines. Each line will be pushed downwards following the next line of the grid.

Name the new document

As part of an AppleScript I develop, I create a new document, I want to give a specific name. So I tried:
say application "Adobe Illustrator".
do new document with Properties ¬
{color space: RGB, name: myString}
end of say
However, the document still appears with the name "without title-1. Is it possible to give the document a name when you create? Or can only do you when recording?

I need the same thing and found the answer using the DocumentPreset object.

In JavaScript, I put the name of the new document in the options DocumentPreset and applied when I created the document. getPoints is simply a conversion from inches to points, btw.
```
var docPreset = new DocumentPreset;
docPreset.units = RulerUnits.Inches;
docPreset.width = getPoints(13.0);
docPreset.height = getPoints(18.0);
docPreset.title = 'test document';
docPreset.colorMode = DocumentColorSpace.CMYK;

var doc = app.documents.addDocument(DocumentColorSpace.CMYK,docPreset);
```

Share the magic trackpad for the new Magic Trackpad 2?

I can negotiate the magic trackpad for the new Magic Trackpad 2?

Apple does not trade for these items. Your best option is to sell (on Amazon or eBay, for example) and then buy a new one. Ask yourself the question that Apple want to do with your old trackpad.

Two other things, your iMac does not run iOS 9.3.3; your profile must be updated. And if you are running an operating system that you are weaker than El Capitan, the new Magic Trackpad 2 may not work fully.

How can I change the default zoom for the new tab only?

The new tab in Firefox 33 zoom is too high to see all 12 of my thumb nail. I changed it using ctrl - but the next time I opened a new tab, the zoom is 100%. How can I change the default zoom for the new tab only?

I posted a style rule to shrink the tiles, which allows several of them on the page, but naturally reduces their legibility. You can experiment with the dimensions to find a look that works for you.

https://userstyles.org/styles/106326/shrink-new-tab-thumbnails

I use the Stylish extension to experiment because of its preview function that allows me to see the effect quickly. You can install it from the site of modules, then after restart of Firefox while searching for his "S" icon in the toolbar to manage Styles so you can edit and experiment.

https://addons.Mozilla.org/firefox/addon/stylish/

How can I manually change the images used for the new tab Page?

I turned off so the images are not cached for the new tab Page history and be reloaded Firefox is restarted. In addition, some of the sites I've pinned use HTTPS and do not allow their images to be cached.

Is it possible for me to put a custom image for each pinned site? A custom screenshot that is not in the cache or an icon to be any? Anything would be better than a box empty here.

Thank you

You can use the following extension to customize the image displayed for the tiles pinned, among other things.
- https://addons.Mozilla.org/firefox/addon/new-tab-tools/

You can buy and 2 Air iPad smart case and use this case for the new iPad 9.7 Pro?

can you get an iPad 2 case Air and use it for the new iPad 9.7 Pro

You should be able to. Both devices have the same accurate external characteristics. I think that the physical difference is that the Pro 2 has 4 speakers and 2 Air has two. (Pro has two on top, two on the bottom, 2 Air just has two on the bottom)

Yes, as long as the case is not "blocking the speakers or you don't care (I use only headphones with my iPad so I don't care if the speakers have been blocked)"

Langer in inches for the new Document in InDesign

Similar Questions

Maybe you are looking for