Language of the EAS console

Similar Questions

• A problem with the web by launching the EAS console - Urgent!

  Hello Experts,
  
  One of my clients has a problem with the web by launching the Regional service console. When tried to start, was inviting to install a .jnlp file. Customers already have Java 2 Platform SE Version 1.5.0 (build 1.5.0_13 - b05) installed on the computer. Make it necessary to install more than that?
  
  Version: 11.1.1.1.00
  
  Please notify. Thanks in advance
  
  Kind regards
  Jingle
  
  Published by: 637223 on January 14, 2009 03:09

  Hello

  They should be able to execute it, it took Java Web Start, which was part of the installation of the JRE from version 1.4
  If you go into control panel - java then java Control Panel click the java tab, under the JNLP section click the button show, if everything is correctly installed, it should show the versions and whether they are enabled or not.

  If they are enabled, then JNLP should work automatically, you may need to reinstall the JRE.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How can I change the language of the Grid control console?

  I get all the menus in Spanish and I want to use in English.
  
  But I don't see any option to change the language anywhere.

  Hello

  the language of the web console depends on the language that you set in your browser. So if you want to see it in English, put the default browser for the English language.

  Best regards
  Robert

• Not able to extend the Essbase in EAS Console Server - 11.1.2.3.500

  HiAll,

  We have improved Hyperion 11.1.2.2 to 11.1.2.3 and then applied the Patch.500.

  We get an error (your session is not connected to the Essbase server/agent) when we expand the Essbase server through the Regional service console. Here are the mistakes of HyS9eas - sysout.log. We are able to connect to servers via Maxl and Add-in essbase however.

  Hys9eas - sysout.log

  < 21 July 2014 1:24:44 CEST > < opinion > < Diagnostics > < BEA-320068 > < Watch "UncheckedException" with severity "Notice" on the server "EssbaseAdminServices0" released in July 21, 2014 1:24:44 AM EDT. Details of the notification:

  WatchRuleType: Journal

  WatchRule: (SEVERITY = "Error") AND ((MSGID = ' WL-101020') OR (MSGID = "WL-101017'") OR (MSGID = "WL-000802'") OR (MSGID = "BEA-101020'") OR (MSGID = "BEA-101017'") OR (MSGID = "BEA-000802'"))

  [WatchData: DATE = July 21, 2014 1:24:44 CEST SERVER = EssbaseAdminServices0 MESSAGE = [path of the module: easconsole ServletContext@811389807[app:EAS: / easconsole spec-version: 2.5 version: 11.1.2.0]] Servlet failed with Exception

  java.lang.IllegalStateException: response already committed

  at weblogic.servlet.internal.ServletResponseImpl.objectIfCommitted(ServletResponseImpl.java:1629)

  at weblogic.servlet.internal.ServletResponseImpl.sendError(ServletResponseImpl.java:637)

  at weblogic.servlet.internal.ServletResponseImpl.sendError(ServletResponseImpl.java:602)

  at jnlp.sample.servlet.JnlpDownloadServlet.handleRequest(JnlpDownloadServlet.java:191)

  at jnlp.sample.servlet.JnlpDownloadServlet.doGet(JnlpDownloadServlet.java:113)

  at com.essbase.eas.server.WebStartDownloadServelet.doGet (unknown Source)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)

  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)

  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)

  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)

  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)

  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)

  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)

  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)

  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)

  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)

  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)

  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)

  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Subsystem = HTTP USERID < WLS Kernel > = SEVERITY = error THREAD = ExecuteThread [ASSET]: '30' for queue: MSGID 'weblogic.kernel.Default (self-adjusting)' = BEA - 101020 MACHINE = AMIWSD05 TXID = the CONTEXTID = 0000KTNO5XY2vHYzLo2VOA1JmvwL0000Fj TIMESTAMP = 1405920284373

  WatchAlarmType: AutomaticReset

  WatchAlarmResetPeriod: 30000

  >

  OracleKeyStoreSpi.secretStoreSetSecret (): alias=CSF_EAS_MAP@#3#@EPM_EAS_USER exists. Update entry.

  At the CCF.500 also been applied on the server of the EAS, if it does not then it will have to be applied.

  If you connect to the same version of Essbase of EAS - 11.1.2.3.500 > 11.1.2.3.500

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Adding an IP to the service console more

  Hi team,

  We have a race ESX 4 and the service console has already been configured with an IP address, I would like to add an IP more (another beach) so this service console must be accessible by both intellectual property.

  Now my console IP service is 172.18.111.155 with a subnet mask of 255.255.255.0, GW - 172.18.111.1

  Now, I need to add another IP 172.18.105.45 Beach IE with a subnet mask of 255.255.254.0. GW - 172.18.104.1

  Could you please let me know if possible, if so how can be done.

  Thank you

  Akhi

  Hello

  Next, you create just a new vSwitch with your 2nd service console using the dedicated bear. Marking will be on the side of the physical switch.

  If this host is in a HA Cluster, you may receive warnings about redundancy.

  Seeing that it is your 2nd service console, you can remove these messages. Watch http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004700

  Please allow points for correct answers

• How chang language connection EM or Console?

  Hi experts,
  When I have EM or Console connection, connection to system language is Chinese by default, how to change the language to English? Thank you.

  Kobe,

  Change the language of the browser,

  From the web browser, make the default language English.
  In Internet Explorer, see tools--> general tab--> languages--> English

  Kind regards
  DpKa

• Cannot start the Recovery Console Windows from the installation CD

  On my MacBook I ve running in VMware Fusion 3.0.1 a Virtual Machine with Win XP Pro.

  When I reboot Win XP Pro and start again from the Windows XP Pro installation CD, I can see the "Welcome" with the menu screen

  -To install Win XP now, press ENTER

  -To repair an installation of Windows XP using the Recovery Console, press r.

  -To quit Setup without installing Windows XP, press F3.

  When I click ENTER or R, I see the message

  -The installation program did not find any hard drives installed in your computer. Setup cannot continue. To quit Setup, press F3.

  Today the question? In the 40 GB of the virtual machine, I have two free partitions of 10 GB and 20 GB Win XP Pro execution. Why see Setup cannot process this partition?

  I ve also installed a second Virtual Machine, but the installation of VMware Fusion not show the "Welcome" screen, but it installs both Win XP Pro.

  The installation of the recovery in the virtual race Machine Win XP Pro Console is successful, but when I start the recovery in Start Menu Console, just the screen blue 0x7B (inaccessible boot device).

  What must I do, to start the Recovery Console in VMware Fusion? Or another question: when merging does support the Windows Recovery Console?

  Wow, nothing indicates that you use a German version of Fusion that your English is excellent.  Anyway as VMware headquarters is in the United States, like me, I always provide information in English and information-specific guidelines in the VMware Fusion help files come from the English version as well as any Documentation from VMware that I reference.  I say this next part as a general and not directed comment towards you, as you have noted your using the German version... Any person requesting help must always at least include technical information referencing manufacture, make, model, version, and language other then English, material goods and software involved in issues.  We'll find a good reference for the type of information that must always be included in HOWTO: ask (and answer) Questions.

  As a much get into the BIOS if you use the Fusion 3, you don't need to enter the BIOS to change the boot device as this can be done in the settings now however to enter the BIOS for other things that need/want of press you F2 directly after starting the Virtual Machine and after having clicked on the screen but the av VM boot so fast that it's easily missed.  You can add the following settings to the file of configuration .vmx of the Virtual Machine to slow down the startup so that force once in the BIOS.

  bios.bootDelay = "3000"
  bios.forceSetupOnce = "TRUE"
  

  The bios.bootDelay is in milliseconds and the bios.forceSetupOnce Boolean value is then set to FALSE, automatically.  Each of these parameters are independent of each other.

  You can find the following useful notes for this and or other uses...

  ====================

  Notes: keyboard

  Different setting function, you may need to adjust various preferences keyboard to work with the function keys and or use the Fn key.

  OS X > you may need to press the Fn + F6 etc. and this can be changed in system preferences > keyboard & mouse > keyboard > use all F1, F2, etc...

  Merger 1 > VMware Fusion (menu) > Preferences... > keyboard and mouse > activate Mac OS shortcuts keyboard

  Fusion of the 2 and 3 > VMware Fusion (menu) > Preferences... > keyboard & mouse > Mac OS shortcuts > activate Mac OS keyboard shortcuts

  ====================

  Notes: Starting the virtual machine from CD/DVD or ISO Image

  If the Virtual Machine is not initiating the CD/DVD or ISO Image, and then select the CD-ROM in the Boot Menu.

  Engage the Boot Menu and select the CD-ROM drive...

  The bottom of the virtual machine just above the status bar after the Virtual Machine is started, it has...

  "Press F2 to enter SETUP, F12 for the start-up network, ESC for Boot Menu"

  On the status bar, it features...

  'To direct entry to this virtual machine, click inside the window.'

  BIOS flashing by is very fast so you need to work quickly however give it a try and if the Start Menu cannot be higher then the configuration of the Virtual Machine file .vmx must be edited to slow the STATION and or change the boot order.

  OK, click the big Play button on the screen of the virtual machine, and then quickly mouse click in the Virtual Machine screen and then press the ESC key to bring up the Start Menu and select the CD-ROM drive. If it boots the CD very well and if the Boot Menu does not appear, because he goes just to quick access and then try again or...

  Watch the Boot Delay section in the current user's Guide to VMware Fusion and the section of the virtual machine files of A Beginner's Guide to VMware Fusion on when the configuration of the Virtual Machine's .vmx file is and add the following lines to the file. TextEdit can be used to edit the .vmx file.

  To give more time to indulge, the Start Menu Add the following...

  bios.bootDelay = "3000".

  For, once, force the VM in the BIOS to change the Boot order in the BIOS if the CD-ROM is first add the following...

  bios.forceSetupOnce = 'TRUE '.

  ====================

  Notes: By modifying the .vmx file

  For Fusion 2.x and 3.x ctrl-click the target entry of Virtual Machine on the windows of the library of the Virtual Machine and choose Show in Finder and then Ctrl-click on the packaging of the Virtual Machine and select to display the contents of the package.

  By default in the normal Fusion 1.x virtual Fusion function file are created in the folder "~/Documents/Virtual Machines" and according to host operating system version and or Fusion worm. There may be a .localized after Virtual Machines although by default, this extension is not visible in the Finder.

  ~ Is your Home Directory.

  The files that make up the virtual machine are placed in a folder (aka Bundle and or packing) bearing the extension '.vmwarevm' which, by default, this extension is not visible in the Finder.

  Example: "~/Documents/Virtual XP.vmwarevm Machines/Windows" in the Finder would just resemble an icon named "Windows XP."

  To view the contents of the entire file "Windows XP.vmwarevm" ctrl-click (or right-click) on the "Windows XP" icon and select Show the contents of the package.

  To change the configuration file of .vmx ctrl-click (or right-click) on the "Windows XP.vmx" file and select open with > choose another... then in Application choose TextEdit.

  Note: If you use Firefox do not copy and paste the parameters if TextEdit unless you copy only the exact line and nothing else in the case, use an editor such as TextWrangler.

  ====================

  Notes: Creating an ISO Image of the CD/DVD drive

  When you use utility disk in order to have a bootable ISO Image, you must select Master CD/DVD without encryption in which case by default, it will have an extension .cdr file and in version 1.1 of the merger and later does not need to be changed in .iso, although one can if one chooses to. A default .dmg image is compressed and is not bootable, as an uncompressed .dmg will start if changed in .iso and of course the source CD/DVD should be bootable in the first place.

  To create an ISO Image using disk utility...

  1 insert the CD or DVD disc into the optical drive of your computer.

  2. open disk utility (/ Applications/Utilities/Disk utility).

  3. Select the CD or DVD drive in the list of disks and volumes.

  4. Choose file > new > "Disk Image from (name of the disc)."

  5. type a name for the disk image.

  6. choose "DVD/CD master" from the Image Format pop-up menu.

  7 choose "none" from the encryption pop-up menu.

  8. click on save.

• It is possible to change the text in the admin console?

  I'm just curious... as someone who is trying to create a site of BC for a non-profit, is it at all possible to change the language or the language of the console administrator of BC? I think especially of the e-Commerce section.

  Thank you!

  Hello

  Not at this stage that the CRM admin cannot be customized yet.

  Only option we provide is the translation of language (Spanish, Japanese, Dutch, German, Swedish, French).

  Kind regards

  -Sidney

• Configure the EAS to use JRE_1.6 - 1.6.0_07

  Hello first post.
  
  We use the EAS 11.1.2.1 trought the Internet http://lab1324a:10080/easconsole/console.html link
  
  We have JRE_1.6 - 1.6.0_07 installed in all of our machines. If upgrading the JRE is not an option.
  
  Can I change a configuration or properties of the server or in my workstatoin file to get the console of Regional service to work with the JRE_1.6 - 1.6.0_07?

  \EPMSystem11R1\products\Essbase\eas\server\AppServer\InstallableApps\Common-> eas.ear-> easconsole.war-> easconsole.jnlp

  The JNLP is in the archive easconsole.war (basically a zip file), and the easconsole.war file is in archive eas.ear (also fundamentally a zip file), the photo below, I hope, helps illustrate where I found the file with the help of archiver WinRar to extract the war of the ear and the jnlp war.

  http://blog.robbsalzmann.com/images/easconsoljnlp.jpg

  Kind regards
  Robb Salzmann

• How can I select the language of the books?

  How to select the language of the books. All iBooks books shows to me are by default in German. I want to change that, how?

  Language is determined by the iBooks store that you download content. The only way to change the language is to change stores > change your iTunes Store country or region - Apple Support

• Get strange errors 'real time' in the browser console, what do mean?

  I noticed recently that since yesterday is the day prior to that, I get a strange 'real-time' error messages in my browser console log. I get them for more or less the same sites, and I have attached a screenshot of some of the most common mistakes for example. I see these errors very frequently in the browser console log.

  So I'm a little worried about what mean these errors, why I want to come and if anything, what to do about them.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• U.S. regional settings are wrong when English is not the language of the phone

  Reminder: for a couple of years ago I had my phone language Italian, but because I have an app that I rely that crashes when the numbers are 1.234,67 I used locale in the United States. It worked well.  Ive spent the last 4 months in Italy and does not need this particular application, so I changed my locale to Italian as well. 2 weeks ago, I went back to the United States and rekindled my regional settings to us. However, they do not turn on.

  

  AS you can see here, although the settings to say "United States", the number format is European, and so the above-mentioned application crashes.

  Ive tried English, German and Italian, the language of the phone. Only when the phone is in English the US settings will work. On the other hand, have the phone in English allows me to go to Switzerland or Italian regional settings easily and makes the appropriate changes. I believe that an update that happened during the 3 months caused the problem, because as I say, it worked fine the last time I got the phone set to the Italian language with a locale in the United States in may

  is - what duplicate by someone else?

  Thank you!

  D

  You must press 'Advanced' in your screenshot.  As you can see, you probably have 'Automatic' turned 'On', which means that the language for numbers is the same as the main language.

  Put "Automatic", "Off".

• How to set the language of the application in the yosemite

  I am located in Sweden, but use the English language on my computer. Yosemite is configured to work in English. Stbbonly Firefox insists on having a Swedish interface! How can I change it to English? The solution given in the help; set the language preference in the region and the system preferences/languages does not work. In fact, I have removed all the languages but English.

  I never had this problem in the Mavericks (10.9)

  Hello Svenne_I, you can choose the language at the time of installation (but default firefox would have offered you the Swedish version when it detects that the request is from Sweden).
  You can simply go to https://www.mozilla.org/firefox/all/ where all languages are listed and download and install the English version on top of your current installation - all your Favorites, passwords and customizations will remain...

• How to display date / time in the browser console?

  How to display date / time in the browser console?

  You can set through the Options (gear icon) page in the Web Console (Firefox/tools > Web Developer).
  This applies to the browser console and the Web console.

  • https://developer.Mozilla.org/Tools/Web_Console
  • https://developer.Mozilla.org/Tools/Tools_Toolbox#settings

• How can I change the language on the toolbar to English that seems to be in Greek or Italian?

  The toolbar or Firefox, as I use it, turned suddenly is a transcription for the Greeks or Italians. I am a speaker of English and don't understand or the other language. What interests me is how can I change the language of the toolbar Firefox back to English. I'd appreciate any help you can give me.
  I use an iMac and that you have installed the latest operating system.
  Thank you.

  If the user interface of Firefox (menu bar) is in the wrong language or you want to change the current language you can find the full version of the current version of Firefox 33.0 in all languages and for all systems operating here:

  • https://www.Mozilla.org/en-us/Firefox/all.html