Laptop computer does start, no screen, no hard drive, no fan

Similar Questions

• How can I configure my computer to start automatically on the hard drive?

  When I connect to my desktop does not start as it tries to boot from the floppy drive. I have to press F9, then when I see "Select first boot device" scroll down to the hard drive. How can I re set my computer to start automatically on the hard drive?

  How can I re set my computer to start automatically on the hard drive?

  It would depend on the BIOS you have.

  What is the brand, model and model number of your PC?

• computer does not recognize my external hard drive, how to fix

  my computer does not recognize my external hard drive and need to know how to fix it. I need to access files on the hard drive. AS SOON AS POSSIBLE

  Hello

  I suggest you to follow these steps and check if that helps.

  Method 1:
  Step 1:

  Go to Device Manager and check if the hard drive is it recognized.

  Step 2:
  Go check and management disk if the hard drive is recognized, if so, then try changing the drive letter and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Method 2:
  Try to run this under fixit and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Also check out this link:
  http://support.Microsoft.com/kb/948911

  It will be useful.

• Computer does not recognize LaCie external hard drive when it is connected.

  Should I just a 'driver' of the manufacturer so that windows recognize? Help, please.

  The device is a hard drive (250 gb) bought in 2006.   LaCie support has provided relevant solutions.

  I disconnected the USB line, reconnected with the power of the unit it turned on and off while only plugged, unplugged, and made all possible combinations of many times. My computer does not recognize anything.

  I can't find it in my computer, and also, the computer does not list the device in the Device Manager utility.

  I have disabled the Windows Firewall.

  The computer with which the external drive worked and one that currently does not recognize are model computers windows XP (2008).

  Thank you very much for your help.

  Thanks for the reply.

  In the meantime and after reviewing all similar positions, it turns out that find the 'live' usb device does the trick.

  So, other people with similar problems, try the usb cables at the back of the computer (all), then by restarting the connection there.

  It worked for me.

  Thanks again for the reply!

• Desktop computer does not recognize any material (hard drive, cd/dvd-rom)

  Hi, have no idea if anyone can help me out here; but my computer is upward; at first, I thought it was the hard drive, but after further investigation, I noticed in the configuration menu of the BIOS that none of my records are to be noticed; I then went into the "boot" and then into "boot device priority" to see if I can put in my recovery cd so that I can just start there and it gives me a list of boot devices... 1st; 2nd; 3rd; 4. a group disk Boot Priority "NOT INSTALLED" list and it says 'NOT INSTALLED' for all of them... it is a dead motherboard?  I don' t want to go geek team and ask them to charge me 70 males just to tell me that.  I prefer to get all my stuff on the hard drive and hope I can find someone who can fix this... any advice would be really appreciated!

  Thank you!

  And another Wicks dust.

  http://h30434.www3.HP.com/T5/desktop-hardware/m8530f-desktop-PC-with-a-M2N78-la-mother-board-doesn-t-see-my/TD-p/181716?JumpID=reg_R1002_USEN

  Here is a partial list of well-known afflicted models:

  e9140f p5210y p6130y p6142p p6210y p6310y p6320y a4316f

  p6157c p6214c a6720y m8530f m9517c m9350f m9530f m9120y

  m9840sc p6214y

• My Windows XP Dell computer does not recognize the external hard drive when it is placed in a port of USP to work.

  I can't get my external hard drive to be recognized by my computer, a Dell PC running Windows XP, SP3. Any suggestions?

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Hope this helps,

• How to add a second hard drive of a laptop computer equipped with 2 bays for HARD drives.

  I noticed a few messages on the forums who have asked how to install a second HDD in your laptop.

  Here is a link to a video on how to install 2nd HARD drive.

  This video will show how to install the hard disk, what parts you'll need and what models are directly related to the video.

  Enjoy!

  I hope this helps!

• My computer does not recognize the external hard drive that my virtual machine is stored (continuous thread solved problem)...

  A new problem arises.  After I crossed the wire attached and mounted my VM on the external hard drive, I can access is no longer my hard drive.  Y at - it a trick to recognize again?

  http://communities.VMware.com/message/1166805#1166805

  Ben, well talk to you again and let me know what external drive you eventually buy and if it was the controller or the drive in the other external drive.

  Woody

• computer will not install an external hard drive.

  my computer does not recognize my external hard drive enclosure. I went to fry and the internal hard drive and the speaker works. I brought my computer to a friend's House and he read it to his house. It turns out that I had to put the jumpers on CSEL. When I got home and tried to plug it in, it won't read it again. I tried to troubleshoot it and he said that my mass storage device has a problem with the drivers. the thing is, he worked at the House of my friend with my computer. I do not understand and it makes me crazy. the only difference is that the reader reads to my friend's House and won't be at the mine.

  Hi danny,

  Did you use the same cables in your home that have been used in your friends?

  The physical location being the only variable might mean that a wire or cable is loose.

  The reader must be reinstalled in the hard disc enclosure.

  I recommend that you check for loose connections.

  Your PC is connected to Internet at your friend's House?

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• computer a824n of office doesn't start with an external hard drive 2T connected.

  My HP Pavilion a824n desktop computer won't start with my new external hard drive 2T connected via a USB port.  The computer stops on the first screen, which I think is the Intel screen, with options for press ESC, F1, F10.  But these keys do nothing.  The only way out is to press the power button until the computer turns off.

  If I disconnect the external drive before turning the power on, the computer starts normally, the internal hard drive.  After that, I can connect from the outside and it works correctly, so I don't think that there is a defect in it.

  I can get into the screen of the BIOS settings to start with the external drive disconnected and by pressing the F8 key.  But the BIOS shows adequate priority, with the hard drive screen internal first, second DVD, third CD.  The internal hard drive is correctly identified by the model number and the new external drive is not at all (because I started without the connected external.)

  My guess is that when I start with connected externally, BIOS thinks it's the hard drive, it is supposed to boot from.  How can I get the machine to boot from the internal drive?

  Your guess is correct. The hard part is that I'm not sure of an exact solution I've seen this be something difficult to solve.

  Have you tried to update the firmware of an external drive?

  Have you updated your PC BIOS? If you are still running XP, I think that it is the update to the BIOS of your PC:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=PV-40501-1&CC=US&DLC=en&LC=en&os=228&Product=445596&sw_lang=

• my laptop is dying, I can move my hard drive to another computer and still use vista coa?

  my laptop is dying, I can move my hard drive to another computer and still use vista coa?

  Hello

  It depends on the type of license you have, as to whether you can transfer it or not.

  Pre-installed Licenses OEM (HP, Acer, etc.) and the Microsoft System Builder OEM licenses are tied to the first machine that they are installed on and channels of license when this machine dies.

  OEM licenses are not transferable.

  If you have purchased your own license for sale retail of Windows and installed yourself, yes you can transfer it to another computer.

  Retail licenses are transferable.

  Just be sure that you have only installed on one machine at a time.

  A single license means one Installation.

  And if it is retail and transfer you, in all likelihood will have to reinstall the operating system, as this disc hard the 'old' aura card mother drivers installed, which will cause starting problems.

  See you soon.

• Satellite 1800-712 does not start with the new HARD drive

  Hello world.

  I am currently trying to install a new HARD drive in my notebook of 1800-712.
  I'm having a few trubbles as my Satellite won't start with my new HARD drive.

  I upgraded my BIOS to the latest version.
  The new HARD drive is a 40 GB Samsung.

  Any suggestions on what I need to do to make it all works?

  THX, Philippe

  Hello

  This device was shipped with 20 GB HARD drive.
  You again is 40 GB.
  I guess that the BIOS does not recognize the HARD drive because of the size.

• laptop HP pavilion touch 14: replaced defective hard drive with pre installed OS on new HDD - device not found Boot (3F0)

  Hey guys,.

  I have a pc hp pavilion touch laptop 14, which has been having a defective hard disk that the operating system was not start and the system test indicated that the hard drive contained errors.
  
  I replaced the hard drive with a new one and before installing the hard drive I formatted with a win installation 8.1. I thought the laptop would just start normally to win8, but gave me a screen saying:

  boot device not found please install an operating system on drive hard drive (3f0)

  The hard drive is new and I did not not how its gives me this error!

  In addition, this laptop does not seem to boot from a cd to format!

  Any ideas?
  
  Thank you
  Karl

  Hey BHK6,

  I found out what was wrong! It was so simple!

  I just need to make the boot inherited from the bios, like that he started directly from the hard drive and does not need of any software pre installed HP to start.

  Thanks for your help anyway

  Karl

• Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

  Hi Gordon

  I just downloaded drivers from the Dell website in support of xp

  I have tried to reboot from the XP cd but got the following message when I tried to install

  "This program is blocked due to compatibility issues"

  Program - the installer of Windows

  Editor - Microsoft

  Location: D:\1386\winnt32.exe

  Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

  I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

  You say that you have started from the XP CD, but something is wrong with that
  you do. Just boot from the CD and follow the prompts for a
  clean install. A new installation by formatting the
  drive and does not care what version of Windows is installed (or
  even if any version of Windows is installed.

  Ken Blake

• Windows Vista does not recognize my external hard drive, Eagle Consus AND-CS2PSU2-BK

  I have an HP Presario laptop running Windows Vista and it does not recognize my external hard drive, or my flash drives.

  I have an external hard drive Eagle Consus AND-CS2PSU2-BK.  It worked fine on my desktop, which works on XP.  I plug it to my computer laptop and nothing.

  When I plugged it in the first place, he says that he needed to download the drivers.  I clicked 'ok' to automatically download drivers and a few seconds later, he said that it successfully completed the driver download/install.

  I look under the drives in my computer and he's not here.

  I went to start, right click computer, left you click on Manage and double-clique then under storage disk management.  All I see are C drive and recovery disc (D).  No other drives displayed.

  I exitted who and set up the Control Panel, double click on Device Manager.  He said in the other topic peripheral USB to ATA/ATAPI bridge.  I don't know whether or not it is my external hard drive.  It indicates the Type of device: Other Devices and under device status it says: "the drivers for this device are not installed. (Code 28).  This operation requires an interactive window station.  To reinstall the drivers for this device, click on reinstall the driver. »

  He asks if I want to reinstall the drivers, so I clicked that.  He couldn't find them / install them.

  Still, I don't know if USB to ATA/ATAPI bridge is still linked to my external hard drive.

  Help, please.  The same thing happens when I try to plug a flash/USB.

  Try this:

  In the right click 'USB to ATA/ATAPI bridge' Device Manager under the other devices section, click unsintall or press the delete key. Reset with the connected hard drive it must be reinstalled, but under the USB controllers. Make sure the device works on the other computer cable can also go to bad.b