laptop for the mining area

Similar Questions

• Laptop for the work of the University

  Hello

  I'm on the purchase of a new laptop. So far, my favorites are the following two:

  http://www.Dell.com/ch/p/configuration-compare.aspx?ReturnUrl=http%3A%2f%2Fwww.Dell.com%2Fch%2Fp%2Fdeals%2Fclearance-deals

  (I hope this link works)

  I have a few questions on my mind:
  How much better / faster is the processor of Gen 6th to the 5th generation?
  If I googled them (and check ark.intel.com) data may not be very good. but it's just numbers. What about performance? What's much faster? or I'm better with 8 GB of additional RAM?

  I use it almost exclusively to the University - which means that I sometimes dozens of PDF and MS Word files open at the same time. If I understand it the RAM is more important when it comes to 'multitasking '?

  Sometimes, I also play games. But I'm no high-end gaming on my laptop. but I've done before on my desk. That's why I'm used to a fast computer / laptop. I want my laptop to be quick (which is my only real is not more...)

  Thanks for your comments!

  BTW I wonder also if it might make sense to buy a laptop with Windows 10 directly rather then buy one with 8.1 and Windows 10 upgrade Windows? the upgrade already slow or if it makes no difference?

  Hi LorinBardric,

  The 6th generation will be the most recent version and maybe a little better than 5th. Usually there will be not much difference. You'll be better off with more ram. 8 gig will be fine. RAM is important for virtually everything you do on a computer.

  You better buy with Windows 10, so all programs are already in place and everything works together as it should. If you have Windows 8.1 and upgrade, you get all the Dell updates for the hardware and software.

  This should be good for the play of light, just keep in mind this isn't a designated game machine. Alienware line are the big gaming machines.

  Looks like you have chosen a good laptop for school and general use.

• Containment for the toolbar area

  Hi all

  I use the Instrument of toolbar for the first time and I am not successfully keep the toolbar free of windows 'child '.

  I would like to have a toolbar in a parent window that isn't overlappable by a child window. In other words, I looking for a situation similar to CVI environment behaviuor, where the 'children' windows are blocked under the toolbar and have no chance to ride it.

  Any suggestion?

  Thank you

  Sergio

  The design of CVI IDE window is slightly different. In your case, you can restrict the panels of the child to hinder it in the parts of the toolbar in the recall of Panel, as follows:

  public static int CVICALLBACK ChildPanelCallback(int panel, int e, void *cb, int e1, int e2)
  {
  #define MY_TOOLBAR_HEIGHT 50
   
  If (e == EVENT_PANEL_MOVING | e == EVENT_PANEL_SIZING)
  {
  Rect r;
  GetPanelEventRect(e2, &r);)
  If (r.top<>
  {
  r.Top = MY_TOOLBAR_HEIGHT;
  SetPanelEventRect (e2, r);
  }
  }
  return 0;
  }

• Is it possible to simply exchange the PSU 850w OEM for the inside area 51 R2 OEM 1500w PSU without the entire system rewired?

  I know as a rule of thumb, one should always use the cables provided with a power supply. However, considering that both the 850w & the 1500w are the two Dell OEM power supplies manufactured by the same company to meet identical specifications for the same system, are the cables between the two interchangeable?

  I am interested in buying for my R2 1500w PSU. However, rewiring the entire system seems too complicated. I know I'll bumble, especially since the case is divided and it is not possible to see clearly where all the cables.

  Thanks in advance for any help.

  Yes, but why pay for such a ugly piece of hardware? To replace Delta, PSU with an EVGA is so easy and is a better option. It takes literally 10 minutes to change

  Here is my page on the R2

  http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19675279

• Cisco ISA disable antivirus for the specified area

  Hi I want an option to turn analysis antivirus for a specified area.

  'Political IPS and control protocol' has this feature where I can choose what areas to include.

  I noticed that I couldn't update my ps3 and download a 100% and never collapsed. I tried like 5 times.

  After that I have disabled the antivirus download scan went well. But I don't want to disable it for all areas, just the area my ps3 is in.

  Please consider adding this feature to the next version of the firmware.

  BR

  Hello

  Could you try with these two options disabled in the advanced settings of the antivirus?

  (1) disable the HTTP resume

  (2) turn off the FTP resume

  Kind regards

  Wei

• BlackBerry smartphones update AND EVERYTHING to LOSE! Warnings for the updates are necessary

  I was and am still sort of next to me.

  I received an announcement / notice on my blackberry Curve today that I needed an update, now being the novice user to the technology in the sense of phone I did as he asked. I've updated, woooohoooo, fine, now my phone will be even better, right?

  WRONG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  I LOST EVERYTHING, MY PHOTOS (3 TAKES JUST 2 HOURS PREVIOUS) MY VIDEOS AND BUSINESS CONTACTS...

  So what I did? Well, first of all, I cried (it has been a month really incredibly bad), so I'm crazy and cussed and almost taken over my van and drove my phone because how I just lost all the evidence, I would need to win in an upcoming trial. I felt that all hope was lost.

  Well, instead of flipping out that I was going I thought ok, I'll call T-Mobile and speak to a REP Smartberry Blackberry, they will know what to do as always, right? Well, it was a loss of 12 minutes on hold. He said once you update, unless you have made a backup on the computer or have a memory card and saved individually for every single photo and video on what then everythings gone.

  I said I just moved last week and a half and have not been able to download my stuff to the computer and don't know where my cord is, besides I said since when do I need to download everything and worry about losing things due to an update. I update my computer all the time and do not lose photos and others.

  He said to update your BlackBerry is like defragment your computer, you will lose information. Well, I guess ignorance is a blessing because I defragment often and have never lost a file. (I know in all cases)

  Anyway that I felt that he put the nail in my coffin, he don't mind not connect me to a 'specialist blackberry' waisting their time when I don't have back up before an update. I tried to inform him that the update didn't state that I could lose all the data, it didn't care. Let's say I was a little rude with my frustrations and hung up.

  And then I contemplated driving on my new phone and then some.

  I then started my own investigations in my phone. I can't tell you how or where I found it exactly. But I found a way to cancel my download and return to my original settings.

  Well, I thought that I is not got nothing else to lose literally so I tried.

  Guess what?

  I'M A HAPPY CAMPER! No mind thanks to you, T-Mobile or Blackberry forums. But my pictures and my video evidence is back.

  And I can tell you this much, as I fear, the new update can puke!

  For the brief time I got it, he stunk. To now record videos of it tells me to insert a memory card, there is already one in there? And it seemed not so good.

  Technicians of Blackberry, creative or what you have, thanks to include a warning to your customers that they SHOULD back UP THEIR DATA before the UPGRADE IF THEY CARE TO KEEP THEIR FILES.

  IT IS IMPARITIVE FOR NOVICE USERS LIKE ME!

  Signed,

  Sighing a slight sigh of relief in Illinois!

  nothappyatall wrote:

  I'm curious. After spending the last two hours of reading more keep me normally never to read on this subject, is implemented one of the creators of Blackberry, updated, or in fact anyone involved in the success of blackberry never consult or contribute to the issues of standard users? Or is their expertise-oriented only to those also knowledgeable than them?

  Hi and welcome to the forums!

  First of all I'm not an employee of or associated products Blackberry, RIM

  I am a user of devices such as you, I

  I'm glad to hear that you did a good job on your phone! Bravo for you!

  I have two questions:

  I see two posts listed for you, both in this thread,

  "I'M A HAPPY CAMPER! The spirit of no thanks to you two T-Mobile or Blackberry forums. "But my pictures and my video evidence is back... »

  You asked for help in another forum or are you referring to this forum of Blackberry?

  Also, please, let us know what version of the Desktop Manager you have, what kind of PC or MAC, and what version of device operating system that you are using. (on the blackberry, click the icon options)

  Scroll to all on the first page, look for the version in this format vX.X.X.XXX... P; lease send it with your Blackberry model, OK? ')?

  Now second question, do you need manuals, software, or procedures? I want to assure you, that you can access all the correct information for other upgrades. If we can help you with any outstanding issues please let me know.

  A point for you to consider in the future. Just because there is a new version of the software whether 3rd party or device OS, you decide when or if you want to install it. If your phone works well, you can install if necessary when you have the time, a good backup and read about it here. If your phone does not work well (come here first) we can help you solve the two problems or say if you need to upgrade you differently.

  Yes, there are some members of staff who stop every day and works behind the scenes and with users in messages, other that expressing the frustration was there any specific information you need of them?  An article on the upgrade, or by using the desktop software?

  Thank you

  Bifocals

• Configure Manager node for the two areas in weblogic

  Hi friends,

  I'm kinda new to weblogic. I need help to configure nodemanager to two areas.

  I created two areas

  1 Classicdomain

  2 RPMdomain

  For classic field, I created the machine and all the server has added to this machine.

  MachineName: localmachine

  Port: 5556

  Plain

  For RPMdomain I created the machine with the same name and the port and all servers added to this machine.

  I registered both server using nmroll().

  First domain has been configured with nodemanager.

  In the second area, I am not able to start a stop managed server via the console.

  Could someone please let me know how to configure the nodemanager.

  Kind regards

  Prates

  Are able to launch those instances successfully from the command line using the command startManagedWeblogic.sh? Once you have started it, try stopping through the node Manager and then start it upward.

  Also, do you have JSSE enabled in your case and/or disabled hostname verification? These errors indicate fundamentally flawed SSL handshakes with the node Manager.

• For a laptop for the loading of images from LR on travel - is 1366 x 768 screen enough and the size of the HARD drive?

  I have big PCs and giant screens for the home edition, but for travel I am looking for a laptop for image loading on the road and the base LR sorting and marking of displacement.

  2 questions for your experiences, the regulars of the forum, in my opinion:

  1 1 TB HDD with an external 1 TB HARD drive as backup - rather than 256 or 512 GB SSD IB (reasons of $$$ and also to load all my images on a trip)

  2. 14-inch screen 1366 x 768 or similar instead of full HD ($$$ reasons and because I tell myself that I can zoom in to check the focus on this screen very well)

  Your comments and your experiences?

  Oz

  Sorry for not giving you enough information

  Cameras include a D800. Last long trip saw about 600 GB of images that I kept on a laptop for about 100 GB of capacity, then on a portable HARD drive (with an another portable HARD drive for backup). I have not run LR on a laptop connected to hard drives external and thought that it would be better all around having large drive onboard

  Computer laptop features include an i7, with a graphics card to support enough treatment LR for the process of cataloguing "on the trip.

• The keyboard shortcuts for the brightness are incorrect in 10.11.4

  Just a mention. Shortcut keys to increase or decrease the brightness are incorrect. They should be F1 and F2.

  

  F1 and F2 are working correctly. Shortcuts are listed just wrong. And no, I didn't change them.

  Now I don't know if they should even be listed. I checked my MacBook Air and my MacBook, as well running 10.11.4 and shortcuts display 12 "are not listed.

• Signed up for the beta area. never had a confirmation email. What now?

  I've never had the confirmation email when I signed up for the beta of the Playbook box.  I am convinced he didn't end up in my spam filter, and the email confirmation for this forum does so very well.  How should I proceed?  Is it possible to send again?  Or is there a reason any he not would not have been sent to all?

  Ahh, nevermind. Just got the confirmation e-mail. I should have been more patient.

• different scheme for the staging area

  Could you please give me a scenario where the transit area must be defined in a different pattern of sources or target

  Hi, even if it is not usual to worm, you have:

  a source file, a picture of RDBMS (oracle, sqlserver, db2...) in your stage area with a transformation and another file in the target.

  a file in your source, a table oracle in your scene and Hyperion Planning and essbase in your target.

  a hyperion planning and essbase in your source, RDBMS in your scene and a file in your target.

  You can even have a file, db2, SQL Server in your source, a join between the 3 sources you RDBMS performance space and a file in your target.

  Also, you may have some file in your source, oracle in your stage of transformation and a db2 into your target.

  Because I normally creates additional steps to manage data, only to have more options can do this whole process into a single interface, but it is possible to have those and many other scenarios to 100%.

  I hope this can help you.

• Is a laptop as a desktop or laptop for the Firefox software?

  This seems to be a grey area and showing that only a cell phone does not help in selecting the correct category for downloading software. I am so confused, I don't know which version I downloaded. I have a HP laptop. Since the last update I have had nothing but problems with Mozilla "not responding" every a few keystrokes. Help, please!

  Desktop computer.

• Can we use this product key on the back of the laptop for the activation and the windows 7 Professional 32-bit to windows 7 Professional 64-bit upgrade?

  I have a laptop HP originally shipped with windows 7 32-bit professional. Now I want to upgrade to windows 7 professional 64 bit. I don't have with me installation disk. So I thought that it is possible (and legal) to resume an installation of windows 7 professional 64 bit disc from a friend and use this product key on the back of my laptop computer to activate windows after the installation of 64-bit? I'm a bit confused.

  NOTE: This sticker on the laptop has windows 7 pro oa, and a product key to 25 digits (xxxxx-xxxxx-xxxxx-xxxxx-xxxxx) written on it.

  In addition, the product ID in the information system in the control panel is OEM.

  Yes, you can use the product key located on the COA sticker with a full retail version or the version upgrade Windows 7 Professional disc.

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  Boot from the DVD 64 bit Windows 7
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)
  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:
  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.
  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

  See also:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• WE have two different laptops, as the two are Stopp:0000007 B when you are trying to install XP.

  Both machines have newer versions of the operating system on them now. It has windows 7 and Vista Business. We suspect it has to do with him was to see the hard drive boot sector XP installation, but do not know how to fix it before you remove the disk and fdisk in another system. Any information regarding this will be more useful.

  You try to install XP on machines that came with Vista and Windows 7 preinstalled? XP is supported on these machines?

  General information on the replacement of Vista/Windows 7 with XP:

  On a computer OEM (HP, Sony, etc.):

  1. go to the OEM Web site and find the XP drivers for your specific model computer. If there is no XP drivers, you can not install XP. End of the story. If there are drivers, download them and store them on a CD - R or USB thumbdrive. you will need after installing XP.

  2. check with the OEM - either since their technical support site, either as - to see if you will cancel your warranty if you do this. If void you your warranty, you make the decision.

  3. If the OEM supports XP on the machine, call them and see if you can qualify to demotion and ask them to send you a XP restore disc. This is by far the easiest and best way to put XP on the machine.

  4. if XP is supported on the machine but OEM does not have a disk to restore XP for you, understand that you will need to buy a copy of XP to your favorite online or brick/mortar store retail.

  5. also understand that you will need to do a fresh install of XP, so if you have any data you want back first.

  6. If none of the above applies to you because you can't run XP which return (see point 1 above), the computer of the machine and buy a running XP instead. MS - MVP - Elephant Boy computers - don't panic!

• Move the recovery flashback for the systems area no ASM

  Hi all
  
  I want to spend my FRA out of the disc which is housing of the instance data files. I look in the docs and find the following:
  
  Change the Flash recovery area to a new location
  
  If you need to move the area of flash recovery of your database to a new location, then follow these steps:
  
  Start a SQL * Plus, on the target database and change of the DB_RECOVERY_FILE_DEST initialization parameter. For example, enter the following command to set the destination to the ASM disk group disk1:
  
  ALTER SYSTEM SET DB_RECOVERY_FILE_DEST = '+ disk1' SCOPE = BOTH SID ='* ';
  
  After you change this setting, all new flash recovery area files will be created in the new location.
  
  
  What would the syntax alter system to system no - ASM with a single instance (SID), something like:
  
  ALTER SYSTEM SET DB_RECOVERY_FILE_DEST = ' / path/to/new/disk "SCOPE = BOTH SID ="MYSIDACE ";
  
  Thanks for any help.

  What would the syntax alter system to a system with a single instance (SID), something like no - ASM: ALTER SYSTEM SET DB_RECOVERY_FILE_DEST = ' / path/to/new/disk "SCOPE = BOTH SID ="MYSIDACE ";

  You are right, but you do not sid = mysid continuous:

  ALTER SYSTEM SET DB_RECOVERY_FILE_DEST = ' / path/to/new/disk "SCOPE = BOTH;

  Now all new flash recovery area files will be created in the new location. The permanent files (control files and redo log online files), flashback logs, backups of databases, archievelogs can be left in the old FRA. The database will remove them from the old FRA as soon as they are eligible for deletion

  If you want more than all of the files from an MRE old new FIU, follow the link

  http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14191/TOC.htm